- WLUG - wlug.mailman3.com

Need recommendation on UPs for small home network.
by E Johnson Sept. 23, 2012

Sept. 23, 2012

Today and the other day we discussed my issues with a modem declared-dead by twin techs from my ISP. Part of that problem may have been caused by bad elex service here. I need a recommendation for a UPS to use here. We have dirty elex here in this 112 year-old central Worcester house, & inadequate amperage to my floor (top floor garret). Refrig runs on same circuit as my computers do. Lights dim when something downstairs also turns on, probably a microwave oven and/or a TV. This won't be fixed any time soon unless the landlady suddenly becomes a benefactress of the Gate$ Foundation, which will never happen. I could sometime get an electrician in here to add a suitable circuit for my floor, but it would be faster & better just to get an UPS, whether or not the elex here is ever upgraded. UPS here would only need to run max 2 PCs plus their monitors, one modem and router & a light bulb or two. Really needs to run only one. The primary PC here is mine, which has a 450W power supply running a 95W AMD FX4100 quad (bulldozer) no vid card. Antec Sonata II case has 2 fans. Mobo is http://www.newegg.com/Product/Product.aspx?Item=N82E16813157292 Built June 2012. Works great. The other PC is a few years older; similar, but usually don't care if it shuts down in power outage or not. I need UPS to beep audibly in a power outage, but only need maybe 5 minutes to light a candle, go to office, save whatever is not saved & Halt. Otherwise just need UPS to smooth out the fluctuating elex here. I'm not clear from newegg or any vendor, which kind of UPS I need to get for this small home setup. Please would someone recommend what UPS would be suitable here, but not overkill. Thanks extremely, Liz J

3 4

Re: [Wlug] Test needed on declared-ill Modem. Who has a lab? -- + update from ISP
by E Johnson Sept. 22, 2012

Sept. 22, 2012

Thanks, Karl. This makes sense. Why didn't I think of that! We have inadequate elex here which dips & dims lights frequently. Had sudden power outages a few times, including one very recently. I am not piping the modem logs anywhere; only check this if I notice an obvious problem. Results: Non available. Case (Motorola SB 6120) has only 2 screws, hex, 2 different sizes. No problem. Backplate then comes off & that's it. Nothing else to undo except whet seem to be clips, but we have no prybar tiny & thin enough to pry up these clip things. Case appears uncrackable, execpt maybe by dropping it from an airplane onto solid concrete. However. If it's only the power supply, I could test this by simply replacing the wall wart with an equivalent one from anywhere. Then I'd have to get the ISP to reprovision it, then watch to see if it worked any better after that. I do have an update from Ch4rter business office, which is relevant to my original beef with this ISP. Yesterday afternoon, I followed up by calling the business office, to ask why they changed their policy on what networking components their customers can or cannot own and administer themselves. The last person I spoke with said I am "grandfathered-in" to be allowed to own & run my own modem, since my account was opened before July, 2012 when the new poilcy was instituted (I'm a customer since there was something other than dial-up). Biz office says these techs who came to see me Thursday simply had "inadequate training" or "incorrect information" from their own supervisors. Both techs did look not older than about 3 days over 19. For the trouble call, I was promised a sup-tech & maybe one of these was, but only sup-ing the second guy how to open cardboard boxes of modems, smile at geekly grannies, & maybe how to drive the van. This modem is not in warranty & no longer manufactured (mine 2+ years old). But Motorola tech support confirmed that any old power supply 12V, 0.76A would run it. I'll borrow a power supply from somewhere, then try this thing one more time here before Responsibly Disposing of it by donating to a worthy friend's parts bin. Thanks very much, Liz J On 21 September 2012 21:52, Karl Lind <electrolind(a)gmail.com> wrote: > Sounds more like the power supply is taking it's time to die. As the power > level dips thats where your errors/reboots are popping up. Easiest thing to > verify is 1.) Turn off the modem and unplug. 2.) Remove case and inspect > the board. 3.) If the board's solder connections look like there are not > good connections ANYWHERE on the board then you probably have a bad solder > issue, if the solder looks good, it's probably a power supply on the board > problem which is a chip. 4.) Post results > > Karl Lind > > On Fri, Sep 21, 2012 at 12:00 PM, <wlug-request(a)mail.wlug.org> wrote: > >> Send Wlug mailing list submissions to >> wlug(a)mail.wlug.org >> >> To subscribe or unsubscribe via the World Wide Web, visit >> http://mail.wlug.org/mailman/listinfo/wlug >> or, via email, send a message with subject or body 'help' to >> wlug-request(a)mail.wlug.org >> >> You can reach the person managing the list at >> wlug-owner(a)mail.wlug.org >> >> When replying, please edit your Subject line so it is more specific >> than "Re: Contents of Wlug digest..." >> >> >> Today's Topics: >> >> 1. Test needed on declared-ill Modem. Who has a lab? (E Johnson) >> 2. Re: Test needed on declared-ill Modem. Who has a lab? (E Johnson) >> >> >> ---------------------------------------------------------------------- >> >> Message: 1 >> Date: Thu, 20 Sep 2012 19:11:17 -0400 >> From: E Johnson <iris.gates(a)gmail.com> >> Subject: [Wlug] Test needed on declared-ill Modem. Who has a lab? >> To: Worcester Linux Users Group <wlug(a)mail.wlug.org> >> Message-ID: >> < >> CABmZTj0aYBHVUR83fPcMBxxpu6-YhfoPDo5G9wB1pdBAAQWwHA(a)mail.gmail.com> >> Content-Type: text/plain; charset="iso-8859-1" >> >> Umm. Non-happy camper. ISP things have changed here, without me being >> informed. Recently (2 days ago) my modem started rebooting every little >> while. Zillions of T3 & T4 timouts in the modem log, Signal lavels were >> perfect when it was online. I own this thing, a Motorola SB6120 purchased >> late June 2010. It has not been abused. >> >> I am in Woosta & we all know the ISP available here. 2 techs showed up >> mid-morning, to diagnose and fix this issue. One guy stood there watching; >> the other guy "did stuff." They checked the signal levels on incoming line >> from the box connected to the pole our back, and declared my moden Dying. >> They talked to each other (not me) & seemed to think I was >> Granny-in-a-Box, >> until they let me say more than one sentence. >> >> These guys also confessed that since July 202, Ch4rter does not "allow" >> customers to own/run their own modems. Their consolation prize is that >> they >> don't charge modem rental fees any more. (it's not on the bill, anyway, >> FWIW). They mumbled some other mumbo jumbo and fled 5 seconds after they >> learned I have my own router too, & didn't care if the modem and router >> were yet in communication. They just said "better reboot" and they "no >> longer" service "wireless" --which I am not running except when certain >> visitors appear. I think they meant they don't diagnose routers, which has >> always been the policy, and which is fine. Internal LAN issues aren't >> their >> problem. >> >> So now I have a modem which may or may not be sick, but no way to test it >> to make sure. Is there anyone here who can take a look at this thing & >> test >> to see if it's Really Dying, or if Ch4rter deaded it with their latest >> firmware revision of their firmware & policy change in July 2012? >> >> An interesting meeting theme sometime might be how to get the Verizon FIOS >> in Worcester. Several years ago I watched Verizon trucks & Verizon moles >> installing their fiber optics in manholes all over town. Ch4rter is >> running >> on Verizon's infrastructure. Ch4rter internet has been working better >> since >> then, but we're still locked out of the option to use verizon. Is this a >> topic of interest to anyone? If so, I'll lead the discussion and even buy >> the Pizz4. To me, this is a Large Pizza problem. >> >> Another interesting but probably futile discussion might center around why >> we have suddenly been deprived of the ability to watch the behavior and >> effectiveness of our modems, which serve internet coming from our ISP.. I >> was not informed of this -- was anyone who is just a 'regular' customer? >> >> Meanwhile, if anyone has a test lab or whatever, where they can test my >> declared-dead modem, please let me know. Otherwise it's probably a >> giveaway, or another piece of Landfill Fodder. I can bring to a meeting & >> can wait for results. >> >> Thanks & happy pizzaz, >> Liz J >> -------------- next part -------------- >> An HTML attachment was scrubbed... >> URL: >> http://mail.wlug.org/pipermail/wlug/attachments/20120920/8789bb41/attachmen… >> >> ------------------------------ >> >> Message: 2 >> Date: Thu, 20 Sep 2012 19:31:59 -0400 >> From: E Johnson <iris.gates(a)gmail.com> >> Subject: Re: [Wlug] Test needed on declared-ill Modem. Who has a lab? >> To: Worcester Linux Users Group <wlug(a)mail.wlug.org> >> Message-ID: >> < >> CABmZTj3Ghp2GHUiWHtGtbBN5NVo0HQKzkrWcvxNngP5_q2hcGQ(a)mail.gmail.com> >> Content-Type: text/plain; charset="iso-8859-1" >> >> PS: This evening, Ch4rter Billing has deleted the upcoming service charge >> for this morning's tech call. Amazing how it took 2 guys to check line >> levels, then hang one moden where my other modem was, + plug in one coax & >> one wall wart , then make 30-sec call to the office to get their >> repacement >> modem provisioned & watch for blinking green lights. 2 guys. >> If this happens to you (they discontinued your router & required you to >> use >> theirs), don't eat the bill. >> it does work fine, FWIW, but not impressed. >> --EJ >> >> On 20 September 2012 19:11, E Johnson <iris.gates(a)gmail.com> wrote: >> >> > Umm. Non-happy camper. ISP things have changed here, without me being >> > informed. Recently (2 days ago) my modem started rebooting every little >> > while. Zillions of T3 & T4 timouts in the modem log, Signal lavels were >> > perfect when it was online. I own this thing, a Motorola SB6120 >> purchased >> > late June 2010. It has not been abused. >> > >> > I am in Woosta & we all know the ISP available here. 2 techs showed up >> > mid-morning, to diagnose and fix this issue. One guy stood there >> watching; >> > the other guy "did stuff." They checked the signal levels on incoming >> line >> > from the box connected to the pole our back, and declared my moden >> Dying. >> > They talked to each other (not me) & seemed to think I was >> Granny-in-a-Box, >> > until they let me say more than one sentence. >> > >> > These guys also confessed that since July 202, Ch4rter does not "allow" >> > customers to own/run their own modems. Their consolation prize is that >> they >> > don't charge modem rental fees any more. (it's not on the bill, anyway, >> > FWIW). They mumbled some other mumbo jumbo and fled 5 seconds after they >> > learned I have my own router too, & didn't care if the modem and router >> > were yet in communication. They just said "better reboot" and they "no >> > longer" service "wireless" --which I am not running except when certain >> > visitors appear. I think they meant they don't diagnose routers, which >> has >> > always been the policy, and which is fine. Internal LAN issues aren't >> their >> > problem. >> > >> > So now I have a modem which may or may not be sick, but no way to test >> it >> > to make sure. Is there anyone here who can take a look at this thing & >> test >> > to see if it's Really Dying, or if Ch4rter deaded it with their latest >> > firmware revision of their firmware & policy change in July 2012? >> > >> > An interesting meeting theme sometime might be how to get the Verizon >> FIOS >> > in Worcester. Several years ago I watched Verizon trucks & Verizon moles >> > installing their fiber optics in manholes all over town. Ch4rter is >> running >> > on Verizon's infrastructure. Ch4rter internet has been working better >> since >> > then, but we're still locked out of the option to use verizon. Is this a >> > topic of interest to anyone? If so, I'll lead the discussion and even >> buy >> > the Pizz4. To me, this is a Large Pizza problem. >> > >> > Another interesting but probably futile discussion might center around >> why >> > we have suddenly been deprived of the ability to watch the behavior and >> > effectiveness of our modems, which serve internet coming from our ISP.. >> I >> > was not informed of this -- was anyone who is just a 'regular' customer? >> > >> > Meanwhile, if anyone has a test lab or whatever, where they can test my >> > declared-dead modem, please let me know. Otherwise it's probably a >> > giveaway, or another piece of Landfill Fodder. I can bring to a meeting >> & >> > can wait for results. >> > >> > Thanks & happy pizzaz, >> > Liz J >> > >> > >> > >> > >> > >> > >> > >> -------------- next part -------------- >> An HTML attachment was scrubbed... >> URL: >> http://mail.wlug.org/pipermail/wlug/attachments/20120920/8a927db4/attachmen… >> >> ------------------------------ >> >> _______________________________________________ >> Wlug mailing list >> Wlug(a)mail.wlug.org >> http://mail.wlug.org/mailman/listinfo/wlug >> >> >> End of Wlug Digest, Vol 107, Issue 5 >> ************************************ >> > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > >

1 0

Re: [Wlug] Wlug Digest, Vol 107, Issue 5
by Karl Lind Sept. 22, 2012

Sept. 22, 2012

Sounds more like the power supply is taking it's time to die. As the power level dips thats where your errors/reboots are popping up. Easiest thing to verify is 1.) Turn off the modem and unplug. 2.) Remove case and inspect the board. 3.) If the board's solder connections look like there are not good connections ANYWHERE on the board then you probably have a bad solder issue, if the solder looks good, it's probably a power supply on the board problem which is a chip. 4.) Post results Karl Lind On Fri, Sep 21, 2012 at 12:00 PM, <wlug-request(a)mail.wlug.org> wrote: > Send Wlug mailing list submissions to > wlug(a)mail.wlug.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://mail.wlug.org/mailman/listinfo/wlug > or, via email, send a message with subject or body 'help' to > wlug-request(a)mail.wlug.org > > You can reach the person managing the list at > wlug-owner(a)mail.wlug.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Wlug digest..." > > > Today's Topics: > > 1. Test needed on declared-ill Modem. Who has a lab? (E Johnson) > 2. Re: Test needed on declared-ill Modem. Who has a lab? (E Johnson) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 20 Sep 2012 19:11:17 -0400 > From: E Johnson <iris.gates(a)gmail.com> > Subject: [Wlug] Test needed on declared-ill Modem. Who has a lab? > To: Worcester Linux Users Group <wlug(a)mail.wlug.org> > Message-ID: > < > CABmZTj0aYBHVUR83fPcMBxxpu6-YhfoPDo5G9wB1pdBAAQWwHA(a)mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > Umm. Non-happy camper. ISP things have changed here, without me being > informed. Recently (2 days ago) my modem started rebooting every little > while. Zillions of T3 & T4 timouts in the modem log, Signal lavels were > perfect when it was online. I own this thing, a Motorola SB6120 purchased > late June 2010. It has not been abused. > > I am in Woosta & we all know the ISP available here. 2 techs showed up > mid-morning, to diagnose and fix this issue. One guy stood there watching; > the other guy "did stuff." They checked the signal levels on incoming line > from the box connected to the pole our back, and declared my moden Dying. > They talked to each other (not me) & seemed to think I was Granny-in-a-Box, > until they let me say more than one sentence. > > These guys also confessed that since July 202, Ch4rter does not "allow" > customers to own/run their own modems. Their consolation prize is that they > don't charge modem rental fees any more. (it's not on the bill, anyway, > FWIW). They mumbled some other mumbo jumbo and fled 5 seconds after they > learned I have my own router too, & didn't care if the modem and router > were yet in communication. They just said "better reboot" and they "no > longer" service "wireless" --which I am not running except when certain > visitors appear. I think they meant they don't diagnose routers, which has > always been the policy, and which is fine. Internal LAN issues aren't their > problem. > > So now I have a modem which may or may not be sick, but no way to test it > to make sure. Is there anyone here who can take a look at this thing & test > to see if it's Really Dying, or if Ch4rter deaded it with their latest > firmware revision of their firmware & policy change in July 2012? > > An interesting meeting theme sometime might be how to get the Verizon FIOS > in Worcester. Several years ago I watched Verizon trucks & Verizon moles > installing their fiber optics in manholes all over town. Ch4rter is running > on Verizon's infrastructure. Ch4rter internet has been working better since > then, but we're still locked out of the option to use verizon. Is this a > topic of interest to anyone? If so, I'll lead the discussion and even buy > the Pizz4. To me, this is a Large Pizza problem. > > Another interesting but probably futile discussion might center around why > we have suddenly been deprived of the ability to watch the behavior and > effectiveness of our modems, which serve internet coming from our ISP.. I > was not informed of this -- was anyone who is just a 'regular' customer? > > Meanwhile, if anyone has a test lab or whatever, where they can test my > declared-dead modem, please let me know. Otherwise it's probably a > giveaway, or another piece of Landfill Fodder. I can bring to a meeting & > can wait for results. > > Thanks & happy pizzaz, > Liz J > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > http://mail.wlug.org/pipermail/wlug/attachments/20120920/8789bb41/attachmen… > > ------------------------------ > > Message: 2 > Date: Thu, 20 Sep 2012 19:31:59 -0400 > From: E Johnson <iris.gates(a)gmail.com> > Subject: Re: [Wlug] Test needed on declared-ill Modem. Who has a lab? > To: Worcester Linux Users Group <wlug(a)mail.wlug.org> > Message-ID: > < > CABmZTj3Ghp2GHUiWHtGtbBN5NVo0HQKzkrWcvxNngP5_q2hcGQ(a)mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > PS: This evening, Ch4rter Billing has deleted the upcoming service charge > for this morning's tech call. Amazing how it took 2 guys to check line > levels, then hang one moden where my other modem was, + plug in one coax & > one wall wart , then make 30-sec call to the office to get their repacement > modem provisioned & watch for blinking green lights. 2 guys. > If this happens to you (they discontinued your router & required you to use > theirs), don't eat the bill. > it does work fine, FWIW, but not impressed. > --EJ > > On 20 September 2012 19:11, E Johnson <iris.gates(a)gmail.com> wrote: > > > Umm. Non-happy camper. ISP things have changed here, without me being > > informed. Recently (2 days ago) my modem started rebooting every little > > while. Zillions of T3 & T4 timouts in the modem log, Signal lavels were > > perfect when it was online. I own this thing, a Motorola SB6120 > purchased > > late June 2010. It has not been abused. > > > > I am in Woosta & we all know the ISP available here. 2 techs showed up > > mid-morning, to diagnose and fix this issue. One guy stood there > watching; > > the other guy "did stuff." They checked the signal levels on incoming > line > > from the box connected to the pole our back, and declared my moden Dying. > > They talked to each other (not me) & seemed to think I was > Granny-in-a-Box, > > until they let me say more than one sentence. > > > > These guys also confessed that since July 202, Ch4rter does not "allow" > > customers to own/run their own modems. Their consolation prize is that > they > > don't charge modem rental fees any more. (it's not on the bill, anyway, > > FWIW). They mumbled some other mumbo jumbo and fled 5 seconds after they > > learned I have my own router too, & didn't care if the modem and router > > were yet in communication. They just said "better reboot" and they "no > > longer" service "wireless" --which I am not running except when certain > > visitors appear. I think they meant they don't diagnose routers, which > has > > always been the policy, and which is fine. Internal LAN issues aren't > their > > problem. > > > > So now I have a modem which may or may not be sick, but no way to test it > > to make sure. Is there anyone here who can take a look at this thing & > test > > to see if it's Really Dying, or if Ch4rter deaded it with their latest > > firmware revision of their firmware & policy change in July 2012? > > > > An interesting meeting theme sometime might be how to get the Verizon > FIOS > > in Worcester. Several years ago I watched Verizon trucks & Verizon moles > > installing their fiber optics in manholes all over town. Ch4rter is > running > > on Verizon's infrastructure. Ch4rter internet has been working better > since > > then, but we're still locked out of the option to use verizon. Is this a > > topic of interest to anyone? If so, I'll lead the discussion and even buy > > the Pizz4. To me, this is a Large Pizza problem. > > > > Another interesting but probably futile discussion might center around > why > > we have suddenly been deprived of the ability to watch the behavior and > > effectiveness of our modems, which serve internet coming from our ISP.. I > > was not informed of this -- was anyone who is just a 'regular' customer? > > > > Meanwhile, if anyone has a test lab or whatever, where they can test my > > declared-dead modem, please let me know. Otherwise it's probably a > > giveaway, or another piece of Landfill Fodder. I can bring to a meeting & > > can wait for results. > > > > Thanks & happy pizzaz, > > Liz J > > > > > > > > > > > > > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > http://mail.wlug.org/pipermail/wlug/attachments/20120920/8a927db4/attachmen… > > ------------------------------ > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > > > End of Wlug Digest, Vol 107, Issue 5 > ************************************ >

1 0

Cleaning out the basement
by Eric Martin Sept. 12, 2012

Sept. 12, 2012

It's time to clean out the basement again. I have a few older computers, along with a 2U custom case and a UPS for a VoIP telephone system with a Ring / Tip style connector (o). First come first serve. Let me know offline if you want anything and I'll bring it along to the meeting tonight. -- Eric Martin

1 0

Reminder: WLUG Meeting Wed 9/12 7PM: Raspberry Pi
by Chuck Anderson Sept. 11, 2012

Sept. 11, 2012

Join us tomorrow evening at 7:00PM in Higgins Labs 230 for what should be an interesting meeting about Raspberry Pi. ----- Forwarded message from Chuck Anderson <cra(a)WPI.EDU> ----- Date: Fri, 31 Aug 2012 14:19:04 -0400 From: Chuck Anderson <cra(a)WPI.EDU> To: wlug(a)wlug.org Subject: [Wlug] Announce: WLUG Meeting Wed 9/12 7PM: Raspberry Pi Precedence: list Reply-To: Worcester Linux Users Group <wlug(a)mail.wlug.org> Hi folks, The next Worcester Linux Users' Group (WLUG) monthly meeting will be held on Wednesday, September 12, at 7PM. The location will be WPI Higgns Labs, room 230 (computer lab). Wednesday, September 12, 7:00 - 9:00 PM WPI Higgins Labs, room 230 (computer lab) WLUG member Karl Lind will be giving a presentation and demonstration of two Raspberry Pi "credit-card sized" computers that run on the ARM processor architecture. Others are welcome to bring their own Raspberry Pi or other similar devices to join in the fun. Afterwards, we will go out for pizza and continue our discussions. See you there, Chuck President, Worcester Linux Users' Group http://www.wlug.org/ _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug ----- End forwarded message -----

1 0

Network Engineer position open at WPI
by Frank Sweetser Sept. 10, 2012

Sept. 10, 2012

Hi all, just wanted to share that we're hiring again in Network Operations here at WPI. We're looking for someone with a good networking background, but linux administration and perl/SQL programming are big pluses as well. Anyone interested can find the full job details and how to apply here: http://wpi.peopleadmin.com/applicants/Central?quickFind=51618 -- Frank Sweetser fs at wpi.edu | For every problem, there is a solution that Manager of Network Operations | is simple, elegant, and wrong. Worcester Polytechnic Institute | - HL Mencken

1 0

Announce: WLUG Meeting Wed 9/12 7PM: Raspberry Pi
by Chuck Anderson Aug. 31, 2012

Aug. 31, 2012

Hi folks, The next Worcester Linux Users' Group (WLUG) monthly meeting will be held on Wednesday, September 12, at 7PM. The location will be WPI Higgns Labs, room 230 (computer lab). Wednesday, September 12, 7:00 - 9:00 PM WPI Higgins Labs, room 230 (computer lab) WLUG member Karl Lind will be giving a presentation and demonstration of two Raspberry Pi "credit-card sized" computers that run on the ARM processor architecture. Others are welcome to bring their own Raspberry Pi or other similar devices to join in the fun. Afterwards, we will go out for pizza and continue our discussions. See you there, Chuck President, Worcester Linux Users' Group http://www.wlug.org/

1 0

Help with water level problems
by Eric Martin Aug. 20, 2012

Aug. 20, 2012

Hey all, I had a close call with my hot water heater this afternoon. I heard on odd noise in the pipes and it turned out that my hot water heater was dumping water out of the overflow valve. Luckily, I found it quick enough, and I'm pretty sure I got it handled for < $150. There's a 1 Gal bucket under the overflow valve, and if I had a water level detector emailing me that water is in the bucket, I could have caught this earlier. I was looking at buying an Arduino and setting up a simple circuit. I know a few people have played with Arduinos, any suggestions on which one to get and how to go about it? I don't need to know how much water is in the bucket, I was thinking about a float type device or even two wires that trip a relay. I just want a heads up that water is in the bucket so I can stop before my basement floods. Thanks in advance, -- Eric Martin

5 6

A question about KMS API's
by Jason Couture Aug. 17, 2012

Aug. 17, 2012

Anyone know anything about the KMS API? From userland? I'm working on a project and would like to use KMS/FB directly, as at boot there will be no binaries available except ours, No libc even. Just a few static binaries. if anyone could point me in the right direction, it would be greatly appreciated it. I can't seem to find anything on it on google, and I really don't have the time to go pouring over the kernel source.

2 2

Re: [Wlug] Wlug Digest, Vol 106, Issue 5
by Karl Lind Aug. 16, 2012

Aug. 16, 2012

Hi Chuck, It doesn't have to be 2 HDMI compatible outputs. It just came to me that the Pi has a composite video and a stereo audio out port too. One of each would be super as I have power supplies, keyboards and mice for both my Pi's. The four OS's (which might be overkill for time) that I plan to bring for the demo are Raspian (a Debian distro that is running a web server), Gentoo, Fedora and OpenELEC (an XBMC type distro). Also if possible Ethernet access? Karl On Thu, Aug 16, 2012 at 12:00 PM, <wlug-request(a)mail.wlug.org> wrote: > Send Wlug mailing list submissions to > wlug(a)mail.wlug.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://mail.wlug.org/mailman/listinfo/wlug > or, via email, send a message with subject or body 'help' to > wlug-request(a)mail.wlug.org > > You can reach the person managing the list at > wlug-owner(a)mail.wlug.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Wlug digest..." > > > Today's Topics: > > 1. September talk (Karl Lind) > 2. Re: September talk (Steve Pelland) > 3. Re: September talk (Chuck Anderson) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 16 Aug 2012 09:56:44 -0400 > From: Karl Lind <electrolind(a)gmail.com> > Subject: [Wlug] September talk > To: Wlug(a)mail.wlug.org > Message-ID: > <CAD3a= > eDBaeqHvAXisgYRk-3zENk9gZKZkLC6xd3TkhREhqFCbg(a)mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > Yep, still up for it. Is there a way to connect two HDMI sources up to > projector/tv/video in the room? Reason I have two Pi's and I thought after > the talk can have two running for demo purposes. > > Karl > > Date: Mon, 13 Aug 2012 12:51:25 -0400 > From: Frank Sweetser <fs(a)WPI.EDU> > Subject: Re: [Wlug] September meeting topic? > To: Worcester Linux Users Group <wlug(a)mail.wlug.org> > Message-ID: <5029308D.3090301(a)wpi.edu> > Content-Type: text/plain; charset=ISO-8859-1 > > > Hi Karl, > > are you still up for giving a talk on the Pi for the September meeting? > So > far as I know it's open for topics, and that sounds like a great one. > > Frank Sweetser fs at wpi.edu | For every problem, there is a solution > that > Manager of Network Operations | is simple, elegant, and wrong. > Worcester Polytechnic Institute | - HL Mencken > > On 07/13/2012 08:43 PM, Karl Lind wrote: > > Howdy all, > > > > I would like to give a talk on the Raspberry Pi project and I have two > > of them to demonstrate various OS's (I have worked with the Debian and > > Fedora implementations and look forward to the others as they come > > out.). I have four SD cards, so that's the number of OS's I can bring > > with me. > > > > Have a great summer! > > > > Karl > > ______________________________ > _________________ > > Wlug mailing list > > Wlug(a)mail.wlug.org > > http://mail.wlug.org/mailman/listinfo/wlug > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > http://mail.wlug.org/pipermail/wlug/attachments/20120816/623c6308/attachmen… > > ------------------------------ > > Message: 2 > Date: Thu, 16 Aug 2012 10:46:45 -0400 > From: Steve Pelland <steve.pelland(a)gmail.com> > Subject: Re: [Wlug] September talk > To: Worcester Linux Users Group <wlug(a)mail.wlug.org> > Message-ID: > <CAMmWueRGFZ2LYnrnsTQv=j=8uWW6rD= > yoDvufRi19VMYZO-dyg(a)mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > Karl, > This meeting will be at the usual place? This will be the first one I get > to attend. I also have a Pi and wanted to chat with others that have Pi's > so this will be a great start. > > Steve > > On Thu, Aug 16, 2012 at 9:56 AM, Karl Lind <electrolind(a)gmail.com> wrote: > > > Yep, still up for it. Is there a way to connect two HDMI sources up to > > projector/tv/video in the room? Reason I have two Pi's and I thought > after > > the talk can have two running for demo purposes. > > > > Karl > > > > Date: Mon, 13 Aug 2012 12:51:25 -0400 > > From: Frank Sweetser <fs(a)WPI.EDU> > > Subject: Re: [Wlug] September meeting topic? > > To: Worcester Linux Users Group <wlug(a)mail.wlug.org> > > Message-ID: <5029308D.3090301(a)wpi.edu> > > Content-Type: text/plain; charset=ISO-8859-1 > > > > > > Hi Karl, > > > > are you still up for giving a talk on the Pi for the September meeting? > > So > > far as I know it's open for topics, and that sounds like a great one. > > > > Frank Sweetser fs at wpi.edu | For every problem, there is a > solution > > that > > Manager of Network Operations | is simple, elegant, and wrong. > > Worcester Polytechnic Institute | - HL Mencken > > > > On 07/13/2012 08:43 PM, Karl Lind wrote: > > > Howdy all, > > > > > > I would like to give a talk on the Raspberry Pi project and I have two > > > of them to demonstrate various OS's (I have worked with the Debian and > > > Fedora implementations and look forward to the others as they come > > > out.). I have four SD cards, so that's the number of OS's I can bring > > > with me. > > > > > > Have a great summer! > > > > > > Karl > > > ______________________________ > > _________________ > > > Wlug mailing list > > > Wlug(a)mail.wlug.org > > > http://mail.wlug.org/mailman/listinfo/wlug > > > > > > > _______________________________________________ > > Wlug mailing list > > Wlug(a)mail.wlug.org > > http://mail.wlug.org/mailman/listinfo/wlug > > > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > http://mail.wlug.org/pipermail/wlug/attachments/20120816/a136e845/attachmen… > > ------------------------------ > > Message: 3 > Date: Thu, 16 Aug 2012 11:15:10 -0400 > From: Chuck Anderson <cra(a)WPI.EDU> > Subject: Re: [Wlug] September talk > To: Worcester Linux Users Group <wlug(a)mail.wlug.org> > Message-ID: <20120816151510.GA6563(a)angus.ind.WPI.EDU> > Content-Type: text/plain; charset=us-ascii > > The meeting room is still TBD. I can find out about connecting 2 HDMI > sources--we should be able to come up with something. > > On Thu, Aug 16, 2012 at 10:46:45AM -0400, Steve Pelland wrote: > > Karl, > > This meeting will be at the usual place? This will be the first one I > get > > to attend. I also have a Pi and wanted to chat with others that have Pi's > > so this will be a great start. > > > > Steve > > > > On Thu, Aug 16, 2012 at 9:56 AM, Karl Lind <electrolind(a)gmail.com> > wrote: > > > > > Yep, still up for it. Is there a way to connect two HDMI sources up to > > > projector/tv/video in the room? Reason I have two Pi's and I thought > after > > > the talk can have two running for demo purposes. > > > > > > Karl > > > > > > Date: Mon, 13 Aug 2012 12:51:25 -0400 > > > From: Frank Sweetser <fs(a)WPI.EDU> > > > Subject: Re: [Wlug] September meeting topic? > > > To: Worcester Linux Users Group <wlug(a)mail.wlug.org> > > > Message-ID: <5029308D.3090301(a)wpi.edu> > > > Content-Type: text/plain; charset=ISO-8859-1 > > > > > > > > > Hi Karl, > > > > > > are you still up for giving a talk on the Pi for the September > meeting? > > > So > > > far as I know it's open for topics, and that sounds like a great one. > > > > > > Frank Sweetser fs at wpi.edu | For every problem, there is a > solution > > > that > > > Manager of Network Operations | is simple, elegant, and wrong. > > > Worcester Polytechnic Institute | - HL Mencken > > > > > > On 07/13/2012 08:43 PM, Karl Lind wrote: > > > > Howdy all, > > > > > > > > I would like to give a talk on the Raspberry Pi project and I have > two > > > > of them to demonstrate various OS's (I have worked with the Debian > and > > > > Fedora implementations and look forward to the others as they come > > > > out.). I have four SD cards, so that's the number of OS's I can bring > > > > with me. > > > > > > > > Have a great summer! > > > > > > > > Karl > > > ------------------------------ > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > > > End of Wlug Digest, Vol 106, Issue 5 > ************************************ >

1 0

September talk
by Karl Lind Aug. 16, 2012

Aug. 16, 2012

Yep, still up for it. Is there a way to connect two HDMI sources up to projector/tv/video in the room? Reason I have two Pi's and I thought after the talk can have two running for demo purposes. Karl Date: Mon, 13 Aug 2012 12:51:25 -0400 From: Frank Sweetser <fs(a)WPI.EDU> Subject: Re: [Wlug] September meeting topic? To: Worcester Linux Users Group <wlug(a)mail.wlug.org> Message-ID: <5029308D.3090301(a)wpi.edu> Content-Type: text/plain; charset=ISO-8859-1 Hi Karl, are you still up for giving a talk on the Pi for the September meeting? So far as I know it's open for topics, and that sounds like a great one. Frank Sweetser fs at wpi.edu | For every problem, there is a solution that Manager of Network Operations | is simple, elegant, and wrong. Worcester Polytechnic Institute | - HL Mencken On 07/13/2012 08:43 PM, Karl Lind wrote: > Howdy all, > > I would like to give a talk on the Raspberry Pi project and I have two > of them to demonstrate various OS's (I have worked with the Debian and > Fedora implementations and look forward to the others as they come > out.). I have four SD cards, so that's the number of OS's I can bring > with me. > > Have a great summer! > > Karl > ______________________________ _________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

3 2

BBQ interest survey: aug14/aug15 ?
by Doug Mildram Aug. 13, 2012

Aug. 13, 2012

Sum sum summatime.... ...and it's crunch time, do-or-die for our annual summer WLUG bbq. I'm looking at hosting ..... REAL SOON, e.g. tues/wed aug14/15, now that I see the weather (tuesday looking like the best sunny day next week). My rough location: boylston (near berlin+Clinton, 10min from 495/hudson, 20min or less from worcester via 290 east...) Timing: loose....6-8pm or later; Challenges: my grill is half-gone (2 of 4 burners work OK) and my motivation depends on some feedback. Reply to me ..........whether you'd (want to)(be able to) attend with or w/o SO's,pets,kids,anyone! Usually I provide beef/sausages/buns/etc, a few soda choices, and leave the rest to fate or better. Here's your form letter for a reply (just to me, dmildram(a)gmail.com) --Possible #humans: _____ (opt: dogs?) _____ --Tues aug 14: ok? -- Wed aug 15: ok? -------(opt) I'd be curious what town you're coming from. Vegetarian, anyone? My wife will help me attempt healthy choices... ----------------------------- I hope to post some (anonymized) results, and hopefully choose/announce,,,,,,,,,,, perhaps by sunday eve or monday morning. --doug

5 5

September meeting topic?
by Karl Lind Aug. 13, 2012

Aug. 13, 2012

Howdy all, I would like to give a talk on the Raspberry Pi project and I have two of them to demonstrate various OS's (I have worked with the Debian and Fedora implementations and look forward to the others as they come out.). I have four SD cards, so that's the number of OS's I can bring with me. Have a great summer! Karl

4 3

BBQ tues aug14 6pm Boylston,MA (addr,directions...)
by Doug Mildram Aug. 13, 2012

Aug. 13, 2012

Sorry if the last-minute planning was inadequate for anyone. Few replies so far == small turnout == could be good anyways! You and even friends/family are invited to my house, roughly aug14 6pm-8pm, 540 Linden St Boylston MA (red house on corner of Mile Hill Rd, probably enough room in my driveway for all to park, then street is OK) I've got ample burgers,sausages,cheese,peppers,onions,buns,tortilla chips,salsa; less beverages. If you like old-fashioned verbose directions, choose one of: http://webpages.charter.net/mquinty/directions/boylston_from_auburn_worc_29… http://webpages.charter.net/mquinty/directions/boylston_from_495+62.txt http://webpages.charter.net/mquinty/directions/boylston_from_rte2_lancaster…

1 0

Cross-compiling for Windows
by dulsi＠identicalsoftware.com Aug. 6, 2012

Aug. 6, 2012

I cross compile a program for windows on my linux box. After doing so I grab all the dlls and package them up. Typically this involves grabbing what I knew was needed and then testing on a windows box to determine if anything is missing. Is their some program in wine that can output what dlls are needed (like ldd) so I can write a script to package up everything? Obviously it doesn't generally change except when I upgrade to a new Fedora version but it would be nice to automate packaging everything. Dennis Payne dulsi(a)identicalsoftware.com

3 2

x86 Android VM
by dulsi＠identicalsoftware.com July 20, 2012

July 20, 2012

Has anyone played with the x86 android images? I've tried running it under kvm but can't seem to get networking to work. I tried 4.0 rc1 a while ago. Looks like I may have found my answers on the release notes. It says ethernet doesn't work. Looks like 2.2 is the last version with working ethernet. That's disappointing. Dennis Payne dulsi(a)identicalsoftware.com

1 0

WLUG july/aug
by Doug Mildram July 12, 2012

July 12, 2012

doug> Chuck is on vacation...hope the website didn't mislead; it said "TBD" for upcoming meetings. ** So I think we're "on break" for July, and still hoping for a new August BBQ volunteer host. Or, I might. From: John Platt <jplatt39(a)gmail.com> Subject: [Wlug] July meeting? Hi! I was on campus this evening but didn't see Chuck or any signs. Did I miss something?

1 0

July meeting?
by John Platt July 12, 2012

July 12, 2012

Hi! I was on campus this evening but didn't see Chuck or any signs. Did I miss something?

1 0

Need keysym code of the FN key -- how?
by E Johnson July 4, 2012

July 4, 2012

Hi guys, I finally got a new keyboard after muddling along with my supernice one that was rapidly dying. Many errors, repeating keys, skips; cable had to be exactly the right angle; lights went out, etc. It needs rewiring. A soldering iron is on its way, whenever the lender can drop it off here, which clearly will not be today. Meanwhile the new one is almost okay, even if it is plastic. This is a Perixx PERIBOARD-502 PLUS, Wired USB Keyboard with Touchpad. BUT -- it has one serious fault. On this keyboard, the outboard key on the lower left side is FN but it needs to be CTRL. The CTRL key is in the wrong place. I use this key hundreds of times/day. So I need to remap this key to be the CTRL key. I can run xev to get the keymap codes, for all keys but this FN key. Apparently the FN key won't give any output by itself, at least not using this method. Without the code, I can't xmodmap this key. I need output like this: KeyRelease event, serial 34, synthetic NO, window 0x4600001, root 0x111, subw 0x0, time 1003909681, (508,-351), root:(512,327), state 0x4, keycode 37 (keysym 0xffe3, Control_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False -- where the part in parentheses after keysym contains the code I need. The manufacturer said they would check with their R&D, but it might take several days. Some solutions to issues like these say this can be done in the BIOS, but there's no guarantee, and I don't want to mess with the BIOS anyway. Is there another way I can find the keymap code for this key? Some keep-it-simple method that won't fry my overheated brain? Thanks very much, Liz J

3 6

RFC: WLUG BBQ July/August timeframe
by Chuck Anderson June 23, 2012

June 23, 2012

We usually have a WLUG summer BBQ around July or August, so I'd like to get the planning discussion going now. Are people interested in having a BBQ this year, and if so, would someone be willing to host it? WLUG should enough in the bank to fund the food, so all we need is a place with a BBQ grill and a time. Comments? Ideas? Chuck

2 1

Re: [Wlug] OPENING - Mid to Sr level SW Engineer - Linux, C++
by John Spencer June 18, 2012

June 18, 2012

I hope I did not insult anyone by asking for a Word resume for a "Linux" position, certainly not my intention. I get a lot of PDF's and my DB does not accept PDFs. At least I know you were reading my posting :) As I stated in my email, I will never send your resume anywhere without talking to you first. Please feel free to pass this opening along to your network Regards, John Spencer Connected Systems Partners Connecting Top Talent with Top Companies 978-455-5550 x208 978-621-9743 cell jspencer(a)connectedsp.com www.connectedsp.com<www.connectedsp.com%20> GET CONNECTED! Unless otherwise explicitly instructed by sender, all information in this email is considered confidential and intended for the view and use of the recipient(s) only.

1 0

OPENING - Mid to Sr level SW Engineer - Linux, C++
by John Spencer June 18, 2012

June 18, 2012

We are seeking a Mid to Sr level Software Engineer to be responsible for software design and development solutions. This is a perm position north of Boston. Responsible for Software Development Life Cycle including design, development, integration and test " Demonstrable ability to communicate complex concepts verbally and in writing " Responsible for major portions of software projects. " Write system design and specifications " Development in accordance with design requirements " Perform software verification procedures and document results " Generate software release Skills & Experience " BSCS or related technical degree " 4+ years of strong C++ and Linux " Strong Object Oriented Design experience " Background with multi-threading and Boost libraries " Experience with software design patterns " Ability to work with vendors, customers and other engineering groups " Experience with medical devices or experience in a regulated industry " Strong written and verbal communication skills Please send a Word version of your resume with any questions. Please Note, your resume will not be sent anywhere without your prior approval. Regards, John Spencer Connected Systems Partners Connecting Top Talent with Top Companies 978-455-5550 x208 978-621-9743 cell jspencer(a)connectedsp.com www.connectedsp.com<www.connectedsp.com%20> GET CONNECTED! Unless otherwise explicitly instructed by sender, all information in this email is considered confidential and intended for the view and use of the recipient(s) only.

4 3

looking to join the local linux community
by Wolf Bronski June 18, 2012

June 18, 2012

Hello, My name is Rich. I've been using Ubuntu and CentOS for a while now. I'm into servers and I'm interested in documentation. I'd very much like to come to the next meeting as I live very close to WPI. I've written a guide about running a Redmine server on CentOS 6.2. It's not complete because i want to add other repositories like Git and SVN besides Mercurial (hg). You can download it at http://107.22.171.253/hg/test/file/fb531026ab76 I've written it in DocBook but there is also a PDF in the repo. Please email me if you wish. Have a great day.

1 0

Announce: WLUG Meeting Wed 6/13 7PM: Secure Virtual Containers/Multi-Tenancy
by Chuck Anderson June 13, 2012

June 13, 2012

Hi folks, The next Worcester Linux Users' Group (WLUG) monthly meeting will be held next Wednesday, June 13, at 7PM. The location will be the WPI Campus Center, Chairman's Room (room 129). Wednesday, June 13, 7:00 - 9:00 PM WPI Campus Center, Chairman's Room (room 129) Dan Walsh of Red Hat will be giving a presentation on Secure Virtual Containers/Multi-Tenancy: "During the Last few years as computers have become more powerful, there has been a move towards server computing. Most people call this "Cloud" computing. One key feature of this is moving servers out of the data center and onto virtual machines. My presentation will describe this as Multitenancy.. This talk will cover technologies from RHEL5, RHEL6 and RHEL7. SELinux, Virtualization, Sandbox and Secure Container Applications." Afterwards, we will go out for pizza and continue our discussions. See you there, Chuck President, Worcester Linux Users' Group

1 1

USB disconnect; problem with keyboard being disconnected
by E Johnson May 27, 2012

May 27, 2012

We have a problem here with keyboard being disconnected many times/day. If I unplug the USB connector, then plug it in again, this works some of the time, but not always. If re-plugging it in does not work, then if I plug in the keyboard at a different port, it sometimes starts working again, but not always. The front USB ports seem a little stretched out; sometimes wiggling the connector temporarily fixes the problem, but not always. The back USB connectors seem nice & snug, but the problem does also happen when plugged in back there. This is output of lsusb: Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 007: ID 046d:c062 Logitech, Inc. Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 047f:c002 Plantronics, Inc. Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 085: ID 0566:3013 Monterey International Corp. Bus 006 Device 084: ID 0566:3020 Monterey International Corp. Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub The keyboard is the Monterey thing, why it's in there two times I have no clue. Sometimes the keyboard works normally for many days, then this disconnecting problem crops again, seemingly random. I can't identify a specific reason why this starts happening, or stops happening. But it's becoming more frequent now. I am not finding a solution in the forums (or maybe I am not searching with the right terms). I am getting zillions of repetitive error messages, a small sample of which is pasted here below. I had these same kind of messages since several years ago, on a different computer (different processor, mobo, case, mouse, keyboard & all) running an earlier version of my OS (Debian). I get similar messages here in a different computer, different keyboard & mouse, running Debian Squeeze. This computer is running Debian Lenny. It is soon to be retired since I just built a brand-new one, but can't retire it until I migrate a whole lot of files to the new one & do some tweaking & installing various apps. Hope someone here has run across this issue & has found a way to solve it. I can't crawl under the table umpteen times/day to plug in a USB cable. Very frustratiing problem. Sample of error messages is below here. Ideas, suggestions would be greatly appreciated. Thanks very much, Liz J May 26 09:18:42 leonardo kernel: [3110102.417306] usb 6-2: USB disconnect, address 27 May 26 09:18:42 leonardo kernel: [3110102.417306] usb 6-2.3: USB disconnect, address 28 May 26 09:18:42 leonardo kernel: [3110102.749302] usb 6-2: new high speed USB device using ehci_hcd and address 29 May 26 09:18:42 leonardo kernel: [3110102.901315] usb 6-2: configuration #1 chosen from 1 choice May 26 09:18:42 leonardo kernel: [3110102.901315] hub 6-2:1.0: USB hub found May 26 09:18:42 leonardo kernel: [3110102.901315] hub 6-2:1.0: 3 ports detected May 26 09:18:42 leonardo kernel: [3110103.009359] usb 6-2: New USB device found, idVendor=0566, idProduct=3020 May 26 09:18:42 leonardo kernel: [3110103.009359] usb 6-2: New USB device strings: Mfr=10, Product=11, SerialNumber=0 May 26 09:18:42 leonardo kernel: [3110103.009359] usb 6-2: Product: USB 2.0 HUB May 26 09:18:42 leonardo kernel: [3110103.009359] usb 6-2: Manufacturer: GENESYS May 26 09:18:43 leonardo kernel: [3110103.225358] usb 6-2.3: new low speed USB device using ehci_hcd and address 30 May 26 09:18:43 leonardo kernel: [3110103.337358] usb 6-2.3: configuration #1 chosen from 1 choice May 26 09:18:43 leonardo kernel: [3110103.345360] input: HID 0566:3013 as /class/input/input2619 May 26 09:18:43 leonardo kernel: [3110103.385357] input,hidraw2: USB HID v1.10 Keyboard [HID 0566:3013] on usb-0000:00:13.2-2.3 May 26 09:18:43 leonardo kernel: [3110103.393363] input: HID 0566:3013 as /class/input/input2620 May 26 09:18:43 leonardo kernel: [3110103.437358] input,hiddev97,hidraw3: USB HID v1.10 Device [HID 0566:3013] on usb-0000:00:13.2-2.3 May 26 09:18:43 leonardo kernel: [3110103.437358] usb 6-2.3: New USB device found, idVendor=0566, idProduct=3013 May 26 09:18:43 leonardo kernel: [3110103.437358] usb 6-2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 May 26 09:18:47 leonardo kernel: [3110107.977546] usb 6-2: USB disconnect, address 29 May 26 09:18:47 leonardo kernel: [3110107.977546] usb 6-2.3: USB disconnect, address 30 May 26 09:18:48 leonardo kernel: [3110108.269231] usb 6-2: new high speed USB device using ehci_hcd and address 31 May 26 09:18:48 leonardo kernel: [3110108.417539] usb 6-2: configuration #1 chosen from 1 choice May 26 09:18:48 leonardo kernel: [3110108.421222] hub 6-2:1.0: USB hub found May 26 09:18:48 leonardo kernel: [3110108.421222] hub 6-2:1.0: 3 ports detected May 26 09:18:48 leonardo kernel: [3110108.529223] usb 6-2: New USB device found, idVendor=0566, idProduct=3020 May 26 09:18:48 leonardo kernel: [3110108.529223] usb 6-2: New USB device strings: Mfr=10, Product=11, SerialNumber=0 May 26 09:18:48 leonardo kernel: [3110108.529223] usb 6-2: Product: USB 2.0 HUB May 26 09:18:48 leonardo kernel: [3110108.529223] usb 6-2: Manufacturer: GENESYS May 26 09:18:48 leonardo kernel: [3110108.749082] usb 6-2.3: new low speed USB device using ehci_hcd and address 32 May 26 09:18:48 leonardo kernel: [3110108.845832] usb 6-2.3: configuration #1 chosen from 1 choice May 26 09:18:48 leonardo kernel: [3110108.852599] input: HID 0566:3013 as /class/input/input2621 May 26 09:18:48 leonardo kernel: [3110108.904715] input,hidraw2: USB HID v1.10 Keyboard [HID 0566:3013] on usb-0000:00:13.2-2.3 May 26 09:18:48 leonardo kernel: [3110108.913547] input: HID 0566:3013 as /class/input/input2622 May 26 09:18:48 leonardo kernel: [3110108.929554] input,hiddev97,hidraw3: USB HID v1.10 Device [HID 0566:3013] on usb-0000:00:13.2-2.3 May 26 09:18:48 leonardo kernel: [3110108.929554] usb 6-2.3: New USB device found, idVendor=0566, idProduct=3013 May 26 09:18:48 leonardo kernel: [3110108.929554] usb 6-2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0

2 4