WLUG July 2001

wlug@lists.wlug.org

33 participants
33 discussions

Start a nNew thread

word perfect

by donald vitkus

can not install word perfect 8.0 on united linux any ideas

11 months, 4 weeks

Re: [Wlug] cable mode and firewall...

by Wesley Allen

That did it! I knew they were a bit screwy there. Do you know if they consider NAT a "proxy"? If they do they can kiss my business goodbuy, I'm not leaving windows unguarded, and 2 firewalls is better than one in linux! Thanks for the help! Wes ---------- Original Message ---------------------------------- From: Chad Pytel <cpytel(a)WPI.EDU> Reply-To: wlug(a)mail.wlug.org Date: Mon, 30 Jul 2001 20:51:12 -0400 >The cable modem that I have from charter (Motorola Surfboard 4100) cache's >and locks onto one MAC address. You need to reboot the cable modem by >unplugging it and plugging it back in (Or going to the modem's webpage at >http://192.168.100.1 and restarting it). Not sure if this is your problem, >but in people questions about Charter I haven't heard anyone mention this >"feature" of the modem their handing out now. > >Hope this helps, >-Chad > >On Monday 30 July 2001 08:23 pm, you wrote: >> Hi, >> I just got broadband at home and am loving every minute of it. But I'm >> hitting one snag... >> >> I dusted off an old sonicwall we had lying around at my job and got >> permission to take it home, after hacking the firewall I got everything set >> up and ready to go, my wan was hooked up to the cable modem, my lan was >> hooked up to the hub, the dhcp server was set up, and I had NAT w/dhcp >> client as the default setting. So I reboot the firewall and it doesn't get >> an ip address! I erase any trace of the older, static, settings, and try >> again, noting. Has anyone else got this problem? I'm stuck with Char er >> communications, do they have some way to avoid giving addresses to >> firewalls; if so, hello DSL my wife is tied to windows and I'm not shelling >> out money for something that comes built into linux. >> >> Thanks, >> Wes >> _______________________________________________ >> Wlug mailing list >> Wlug(a)mail.wlug.org >> http://mail.wlug.org/mailman/listinfo/wlug >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug >

19 years, 3 months

cable mode and firewall...

by Wesley Allen

Hi, I just got broadband at home and am loving every minute of it. But I'm hitting one snag... I dusted off an old sonicwall we had lying around at my job and got permission to take it home, after hacking the firewall I got everything set up and ready to go, my wan was hooked up to the cable modem, my lan was hooked up to the hub, the dhcp server was set up, and I had NAT w/dhcp client as the default setting. So I reboot the firewall and it doesn't get an ip address! I erase any trace of the older, static, settings, and try again, noting. Has anyone else got this problem? I'm stuck with Charter communications, do they have some way to avoid giving addresses to firewalls; if so, hello DSL my wife is tied to windows and I'm not shelling out money for something that comes built into linux. Thanks, Wes

19 years, 3 months

Re: [Wlug] HELP ME

by Wesley Allen

---------- Original Message ---------------------------------- From: "Michael and Sharon Burns" <vze2b2jw(a)verizon.net> Date: Mon, 30 Jul 2001 14:33:05 -0400 >I have a copy of Mandrake 7.2 . >Will some one please help me install it? >I can get it installed but cannot get it to go on line. >i have dsl, and it recognises my network card but will not configure it . 7.2 had some problems with DSL as far as I can remember, and do you know what type of network card you've got? Mandrake snags just about any kind, though my usb nic had to be hand configured even though it knew what it was. I've got a couple of copies of 8.0, it got my cable service up and running w/ no problems. > >I also am stuck with a winmodem. My advice with the winmodem...take it out, nail it to the wall, and smile when you think of how you don't need to use it anymore... > > > >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug >

19 years, 3 months

HELP ME

by Michael and Sharon Burns

I have a copy of Mandrake 7.2 . Will some one please help me install it? I can get it installed but cannot get it to go on line. i have dsl, and it recognises my network card but will not configure it . I also am stuck with a winmodem.

19 years, 3 months

apache server

by jim stith

dan; yes, i can ping client to server and server to client. i looked at ipchains -L -n and the only source other than 0.0.0.0/0 was 192.168.1.1 which is the ip address of the server and the target was accept at ports 53 -> *. the other accept was prot all source 0.0.0.0/0 and ports n/a. everything else had target of reject (tcp udp) et.al. chain forward policy is accept chain output policy is accept now to be honest with you, i haven't much of a clue what the above means. hopefully, you do. any more help muchly appreciated. jim s

19 years, 3 months

Firewall Script hacking (LONG)

by Paul Gelinas

Hi, I've been meaning to do this for months, so here goes: Many of you (like me) probably use Bob Ziegler's firewall scripts (or some variant/derivative thereof) for maintaining your firewall. These scripts (particularly the IANA listings) need to be updated periodically.

19 years, 3 months

Fwd: [Don.Reagan@trw.com: Need help on a Linux issue]

by Andy Stewart

HI gang, If anybody feels like writing an answer to this technical question, you have a chance of getting it published in SysAdmin magazine. If you're interested, directly contact Don.Reagan(a)trw.com ASAP. Thanks, Andy ---------- Forwarded Message ---------- Subject: [Don.Reagan(a)trw.com: Need help on a Linux issue] Date: Wed, 25 Jul 2001 16:58:41 -0400 From: <arr(a)oceanwave.com> To: andystewart(a)mediaone.net Howdy, Liz (your sister) said you'd be the man who may know the answer to this. I write a column (Q&A) for SysAdmin magazine, but I'm not a Linux person and know diddly about their printing stuff. If you can answer this guy's question (cc me) and it's a sufficiently complex answer, I'll be happy to print it in the next issue I write up. If you're not interested, thanks for reading this far, and sorry for bothering you. :} ------- start of forwarded message (RFC 934 encapsulation) ------- Importance: Normal From: "Don Reagan" <Don.Reagan(a)trw.com> To: <jrmckins(a)yahoo.com>, <arr(a)oceanwave.com> Subject: Need help on a Linux issue Date: Wed, 25 Jul 2001 11:47:31 -0700 This is a multi-part message in MIME format. - ------=_NextPart_000_001C_01C114FF.9640F520 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit I am a reader of the Sys Admin magazine. I was wondering if you can help me on a Linux issue. I can't print to a networked HP LJ 5Si printer. Notes: I Can ping the printer. I can ping all network resources. Printer is in the same hub as my computer. Tried to setup printer on computer using CUPS, LPR, PDQ, PRINTTOOL, and Mandrake Hardware setup tool. CUPS asks me for a command line. I tried something like "IPP://PrintServer/PrinterName:9100" Also with the word socket in the front. None of the examples I have seen ask for the IP. I tried one command line with the IP but it didn't work. None of the documentation is clear on networked HP printers. It seems like I have tried every combination. Tried a raw IP print to the printer "lpr raw(a)123.123.123.123 test" Printer runs these protocols: Netware, TCP/IP, AppleTalk, and LAT. We print to this printer in Windows using a Windows 2000 print server. I am the maverick I want to dual boot Windows and Linux. Using CUPS (Common Unix Printing Service) with IPP, Socket, and other setup lines. Not sure of the command line for this. I tried editing the /etc/printcap, and /etc/printrc files. I Got the PDD for the HP 5Si printer. I thought maybe my editing of printcap or printrc was stopping the CUPS or other methods of setup from working so I went back to the original copies. Oh ya, before you say something simple like read the print man page--I did, also I went to Mandrake documentation, HP printing for Unix web page, read the documentation at Linuxprinting.org web site, Read the printing documentation at Red Hat web site. Not sure it is a HP Jetdirect network card in the printer. Though I suspect I could use HP Jetdirect software to set it up on a Windows machine. I guess what I really need is someone who has printed from a Linux variant to a networked HP printer. Everything I read says this is traditionally a hard issue because of varies issues. Compatibility has been an issue. System: Mandrake Linux v8 full install, Dell GX110 computer. 3Com905 network card. Thank you, Don Reagan Senior Systems Administrator 310.812.6273, don.reagan(a)trw.com TRW Systems/IIT (S&ITG) One Space Park, R2/1015C, Redondo Beach, CA. 90278 -- Andy Stewart Founder Worcester Linux Users' Group Worcester, MA, USA http://www.wlug.org

19 years, 3 months

Fwd: Call for Papers: 2002 USENIX Annual Technical Conference

by Andy Stewart

---------- Forwarded Message ---------- Subject: Call for Papers: 2002 USENIX Annual Technical Conference Date: Wed, 25 Jul 2001 15:50:25 -0700 From: Usenix Assocation <mktgadm(a)usenix.org> To: astewart(a)world.std.com Attn: Worcester Linux Users' Group Dear Worcester Linux Users' Group, Below is a conference announcement and Call for Papers for the 2002 USENIX Annual Tehcnical Conference. Please let me know if you have a more appropriate method for submitting this information. Thank you for your assistance! Best Regards, Alexandra Szczepanski USENIX Association/SAGE 2560 Ninth Street, Suite 215 Berkeley, CA. 94710 ph (510) 528-8649 fx (510) 548-5738 www.usenix.org ----------------------------------------------------------- 2002 USENIX Annual Technical Conference June 9-14, 2002 Monterey, CA http://www.usenix.org/events/usenix02/ The 2002 USENIX Technical Conference seeks original and innovative papers about the applications, architecture, implementation, and performance of modern computing systems. As at all USENIX conferences, papers that analyze problem areas and draw important conclusions from practical experience are especially welcome. Some particularly interesting application topics are: *Cluster computing *File systems and storage systems *Complexity management *Distributed caching and replication *Mobile code *Mobile/Wireless computing *Multimedia *Networking and network services *Reliability and QoS *Security and privacy *Ubiquitous computing *usage studies *Web technologies *Energy/Power Management *Interoperability of heterogeneous systems FREENIX is a special track within the USENIX Annual Technical Conference that showcases the latest developments and applications in freely redistributed technology. The FREENIX track covers the full range of software and source code including but not limited to Apache, Darwin, FreeBSD, GNOME, GNU, KDE, Linux, NetBSD, OpenBSD, Perl, PHP, Python, Samba, Tcl/Tk and more. FREENIX is looking for papers about projects with a solid emphasis on nurturing the open source/freely available software community and talks which advance the state of the art of freely redistributable software. Areas of interest include, but are not limited to: *Cross-platform source portability and binary compatibility *Desktop metaphors *Distributed and parallel systems *Documentation *File system design *Highly-available systems *Graphical user interface tools *Storage Systems *Highly-scalable and clustered systems *Security *System and user management tools *Quality Assurance *Large scale system management *Print Systems *Free Software development/mgmt *Operating system design *Interesting deployments of free software Submission guidelines and conference details are available on our website: http://www.usenix.org/events/usenix02/cfp/ Submissions to the Freenix Track are due on November 12, 2001. Submissions to the General Refereed Sessions Track are due on November 19, 2001. Join us in developing the best technical conference program of 2002! ==================================================================== The 2002 USENIX Annual Technical Conference is sponsored by USENIX, The Advanced Computing Systems Association. www.usenix.org ==================================================================== ------------------------------------------------------- -- Andy Stewart Founder Worcester Linux Users' Group Worcester, MA, USA http://www.wlug.org

19 years, 3 months

easter egg in staroffice 5.2 calc...

by Keller, Tim

(got this off the boston linux users group mail) type =GAME("StarWars") into a cell in StarOffice calc and see what happens Note: I don't have staroffice 5.2 so I can't confirm it... Tim.

19 years, 3 months

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

WLUG July 2001