raid1
by Simeon MacMillen
I'd like to set up Raid-1 on my computer. I have 2 500Gig hds, one of
which is empty, and one of which has data (that I want to keep). I
found this guide, https://wiki.ubuntu.com/Raid (I use Ubuntu), and
liked the "super simple md" recipe, but I'm not sure how to do this so
that I don't loose data. (I searched around, but the only thing I
found required the alternate install CD, which I have issues with.)
Any help would be appreciated.
Simeon MacMillen
9 years, 11 months
clarification, raid
by Simeon MacMillen
On Tue, Aug 26, 2008 at 12:43 PM, Doug Mildram <dmildram(a)gmail.com> wrote:
> for safety how bout a 3rd disk
> OR box on your network to ftp/push a "dump" or "tar" file to?
Are you suggesting that I don't use Raid at all or that I just back up
my stuff before I start?
>
> stated otherwise, how much data to copy (vs what size older disks do
> you have in the near-junk-pile?)
I have more data on the 500 Gb drive than I have space on my spare 80
Gb drive...so it sounds like backing up is not an option (unless you
have another idea). I might add that the drives have about 7
partitions each. Would it be possible to set up raid one partition at
a time, backing up each partition b/f setup?
Simeon
> (I know: the fun answer is the one that's the coolest. Who doesnt
> cross their fingers doing a "resize2fs"?)
>
> I'm home studying UNIX/rh/lvm/etc anyways so if you wanna call, I'd
> probably enjoy helping/talking.
>
> -doug 508 847 8926
>
9 years, 11 months
OPENING - Linux kernel build role (mid to Sr level)
by John Spencer
Our client in MA has an opening for a Mid to Sr level Linux kernel
engineer. This is a 12+ mth contract.
Linux Kernel Build Engineer
Scope of Responsibilities/Expectations;
Mid/Senior level software developer responsible for some user mode
device drivers but mostly Linux kernel builds, configurations, and
customizations.
Candidate is expected to have some experience of design and
implementation of Linux device-drivers and or system utilities and have
worked in a fast paced environment
Specifics:
- 5+ years experience with C, C++ or assembly-language programming for
Linux.
* 2+ years experience designing, developing and implementing Linux
and/or Unix device drivers.
- Willing to do debug and code optimization, boot sequencing, linking,
initial down loader, and performance tuning type work
- The candidate must be adaptable, flexible and willing to take on new
challenges.
- The candidate must be a team player, and must be able to work with
multiple engineering and cross-functional teams.
Additional Desirable Skills
- Working with Broadcom and MIPS based processors/targets
* Experienced with hardware features such as CPU/memory architectures,
DMA engines, Boot loaders, I2C, PCI, Ethernet, USB, IEEE-1394, RS-232,
etc.
Regards,
Optimal Engineering Partners Inc. is now Symphony Services!
John Spencer
Office: 978-256-1113 ext 7608
Fax: 978-256-1184
jspencer(a)symphonysv.com <mailto:risaac@symphonysv.com>
Symphony Services
1 Technology Park Drive
Westford , MA 01886
www.symphonysv.com
<blocked::file:///C:\Documents%20and%20Settings\hripley-boyd\Application
%20Data\Microsoft\Signatures\www.symphonysv.com>
This electronic transmission (and any attached documents) contains
information from Symphony Services and is for the sole use of the
individual or entity it is addressed to. If you receive this message in
error, please notify me and destroy the attached message (and all
attached documents) immediately.
9 years, 11 months
I'm running late this evening.....
by Andy Stewart
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
...so if I'm not there right at 7:00 PM, please start without me. I
should be there by 7:10 PM at the latest, traffic permitting.
Thanks, and my apologies,
Andy
- --
Andy Stewart, Founder
Worcester Linux Users' Group (http://www.wlug.org)
Chelmsford Linux Meetup Group (http://linux.meetup.com/393)
Amateur Radio: KB1OIQ
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org
iD8DBQFIreoMHl0iXDssISsRApv8AJ4w2BZvh//ODIBZGtwyq1B+mSsD+ACcD6DX
lp0vCxqmXKNTryin+zFly2I=
=q8DI
-----END PGP SIGNATURE-----
9 years, 12 months
REMINDER: Meeting Thurs, Aug 21st, 7:00 PM
by Andy Stewart
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi Everybody,
At this WLUG meeting, our guest speaker will be Liz Johnson, friend of
long time WLUG member Greg Avedissian. The topic for this meeting will
be an introduction to GIMP, the GNU Image Manipulation Program.
Here are some words about the talk from Liz:
=====
A paint and image editing program, GIMP is Linux's software alternative
to Adobe Photoshop. Learn basic methods of working on images such as
jpeg, bitmap, tiff. GIMP can import PDF documents and the Raw image
formats used by many digital cameras. Restore old photos,
color-corrrect, resize, crop, correct exposure, redeye, flash. Use
special effects such as emboss, sharpen, smooth. color enhance,
transparency, sparkle, or softglow. Create your own desktop images,
icons, and logos.
GIMP can help you lose 15 pounds overnight, or make you look like
everyone's favorite movie star. It's open source, 100% natural,
non-toxic, and free.
=====
The website will be updated shortly.
See ya there!
Andy
- --
Andy Stewart, Founder
Worcester Linux Users' Group (http://www.wlug.org)
Chelmsford Linux Meetup Group (http://linux.meetup.com/393)
Amateur Radio: KB1OIQ
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org
iD8DBQFIpvXJHl0iXDssISsRAnaYAJ4rvcKJz9ZOBmiPAsxeAPP1VC3CxwCfdKe8
Se7xH5gy14+UZHc+kxA6KXI=
=wUrH
-----END PGP SIGNATURE-----
10 years
Re: [Wlug] Accessing Host Names
by Mike Leo
oops! thanks for the correction
----- Original Message ----
From: Eric Martin <freak4uxxx(a)gmail.com>
To: Worcester Linux Users Group <wlug(a)mail.wlug.org>
Sent: Tuesday, August 12, 2008 8:23:14 AM
Subject: Re: [Wlug] Accessing Host Names
Mike Leo wrote:
> if you add the raw IP and host name to /etc/resolv.conf (or on windows c:\windows\system32\etc\hosts) you can then access via names
>
>
>
> ----- Original Message ----
> From: "kstratton(a)fastmail.us" <kstratton(a)fastmail.us>
> To: Worcester Linux Users Group <wlug(a)mail.wlug.org>; Worcester Linux Users Group <wlug(a)mail.wlug.org>
> Sent: Tuesday, August 12, 2008 7:56:04 AM
> Subject: [Wlug] Accessing Host Names
>
> I am trying to access the use SSH using host names instead of using the
> raw IP address. I am currently using DCHP to connect to an inexpensive
> Linksys router and I can see the host names and their IP address when I
> view the connections list.
>
> If the machine name (ie CLYDE) is not the host name, please correct me.
>
> Is there some way to extract this information? If so, how?
> Do I need to run bind to be able to use the host names in place of IP
> addresses?
>
> Any help would be appreciated.
>
/etc/resolv.conf is the ips of your name servers. You want to add info
to /etc/hosts
basically add something like
192.168.0.100 my-ssh-server <other name for it if you want>
--
Eric Martin
Key fingerprint = D1C4 086E DBB5 C18E 6FDA B215 6A25 7174 A941 3B9F
10 years
AIX 5.3 Question
by vze284qe＠verizon.net
Hello,
At work, I have an RS6000 running AIX 5.3. The on-board NIC controller
failed. I installed a dual-port Intel Pro 10/100/1000 NIC card.
When I start the server, the Intel card isn't recognized. SMIT doesn't
see it either. What do I have to do in SMIT so that I can use the card?
Thanks,
--
-Chuck
10 years
Re: [Wlug] Accessing Host Names
by Mike Leo
if you add the raw IP and host name to /etc/resolv.conf (or on windows c:\windows\system32\etc\hosts) you can then access via names
----- Original Message ----
From: "kstratton(a)fastmail.us" <kstratton(a)fastmail.us>
To: Worcester Linux Users Group <wlug(a)mail.wlug.org>; Worcester Linux Users Group <wlug(a)mail.wlug.org>
Sent: Tuesday, August 12, 2008 7:56:04 AM
Subject: [Wlug] Accessing Host Names
I am trying to access the use SSH using host names instead of using the
raw IP address. I am currently using DCHP to connect to an inexpensive
Linksys router and I can see the host names and their IP address when I
view the connections list.
If the machine name (ie CLYDE) is not the host name, please correct me.
Is there some way to extract this information? If so, how?
Do I need to run bind to be able to use the host names in place of IP
addresses?
Any help would be appreciated.
--
kstratton(a)fastmail.us
_______________________________________________
Wlug mailing list
Wlug(a)mail.wlug.org
http://mail.wlug.org/mailman/listinfo/wlug
10 years
OPENING - Linux Drivers Engineer in Burlington, MA
by John Spencer
Our client in MA has an opening for a Mid to Sr level Linux Drivers
engineer. This is a 6+ mth contract.
Mid to senior level Linux Systems Engineer to perform Linux driver
modification and integration in C. Will be integrating various types of
drivers. Must have experience doing complex tasks including Ethernet and
character driver skills.
Regards,
Optimal Engineering Partners Inc. is now Symphony Services!
John Spencer
Office: 978-256-1113 ext 7608
Fax: 978-256-1184
jspencer(a)symphonysv.com <mailto:risaac@symphonysv.com>
Symphony Services
1 Technology Park Drive
Westford , MA 01886
www.symphonysv.com
<blocked::file:///C:\Documents%20and%20Settings\hripley-boyd\Application
%20Data\Microsoft\Signatures\www.symphonysv.com>
This electronic transmission (and any attached documents) contains
information from Symphony Services and is for the sole use of the
individual or entity it is addressed to. If you receive this message in
error, please notify me and destroy the attached message (and all
attached documents) immediately.
10 years
