Hi,
Anyone on here using Charter Telephone VOIP service? I've currently
got Verizon, but the wife hates it because our phone lines get flaky
all the time, esp when it rains.
So I'm thinking to save money and combine all my stuff onto Charter.
I've already got High Speed internet and regular old cable. Not wild
about Digital Cable since I'm happy with Tivo and I don't want yet
another set top box to have to deal with...
So, any horror stories about Charter Phone VOIP quality and service?
Thanks,
John
Hi All,
I have floated the following idea at my church and it has been well received. Seek donations of older computers, have the youth group refurbish them, sell them at a low price with user training and support to seniors. The money raised will go to the youth group. The systems would be optimized for email and web surfing. Naturally Linux would be the OS.
Is this a crazy idea? Has anyone done something similar? Are there resources available to help with this sort of thing?
Thanks,
Mike
Sent via BlackBerry by AT&T
I have a Sparc Ultra 1 which has been running flawlessly since 2003 running Ansel 2.4.20-2.3sparc.
Last week after a nine day power outage the system no longer activates eth0, the TPE ethernet interface.
I installed a -->
Sun 501-5443 x1049A quad 4-port SBus Fast Ethernet card
The operating system does not recognize this new hardware.
This system has been running so flawlessly for at least four years that I have forgotten much of what I had learned about Aurora.(I am an elderly man by high tech standards).
The little green input light corresponding to the port to which I have attached the fast ethernet cable does illuminate.
Where do I start?
Ken Jones
Oops!
I just looked inside my ULTRA SPARC ONE. The ethernet I/O appears to be embedded in the big mother board. That is not good if I am correct.
Any suggestions??
Ken Jones
----- Original Message -----
From: Ken Jones
To: wlug(a)mail.wlug.org
Sent: Sunday, December 21, 2008 6:31 PM
Subject: Aurora - SPARC question....
Folks,
I've not been WLUG active for a year or more. Back then the half of my 111 gig PC disc which was dual booted with FEDORA developed a permanent error. The other half's XP installation has been OKAY. I have learned to us WINDOWS.
Meanwhile my SUN ULTRA running as an Aurora SPARC SAMBA file server since 1993 has been chugging along just fine.
I live in Fitchburg. We have been without power for nine days. 110 volts came up yesterday evening. Much to my chegrin my SUN was unhappy. I used a rescueCD to boot. All came back except my ethernet card. It would not start. The little light at the far end on the IP cord does not glow...
---------
/etc/rc.d/init.d/network restart
says, "Bringing up interface eth0: Determining IP information for eth0 ... failed.
[FAILED]"
The card is claimed to be a 'sunlance' card.
Any ideas? Is the card fried do you think?
I have a second SPARC machine. It's ethernet was working last time it was powered. Must I swap?
Ken Jones
My SUN ULTRA 1 has lost its eth0 card circuit.
I have purchased a
Sun 501-5443 X1049A Quad 4-Port SBus
Fast Ethernet Card for my SUN ULTRA 1 running Aurora.
The original fast ethernet circuitry is part of the SystemCard. I do not wish to replace the system card. Will I have a problem finding a driver?
Ken Jones
Folks,
I've not been WLUG active for a year or more. Back then the half of my 111 gig PC disc which was dual booted with FEDORA developed a permanent error. The other half's XP installation has been OKAY. I have learned to us WINDOWS.
Meanwhile my SUN ULTRA running as an Aurora SPARC SAMBA file server since 1993 has been chugging along just fine.
I live in Fitchburg. We have been without power for nine days. 110 volts came up yesterday evening. Much to my chegrin my SUN was unhappy. I used a rescueCD to boot. All came back except my ethernet card. It would not start. The little light at the far end on the IP cord does not glow...
---------
/etc/rc.d/init.d/network restart
says, "Bringing up interface eth0: Determining IP information for eth0 ... failed.
[FAILED]"
The card is claimed to be a 'sunlance' card.
Any ideas? Is the card fried do you think?
I have a second SPARC machine. It's ethernet was working last time it was powered. Must I swap?
Ken Jones
Hi
I haven't used GnuCash but I hear its a great program. Has anyone used Openbravo. I just installed it on a local Ubuntu server. I would like to move the instance to an EC2 machine. Does anyone have experience with Amazon EC2 installations? I have an Ubuntu EC2 machine running but need further assistance. I Would love to hear about your experiences.
--- On Sat, 12/13/08, wlug-request(a)mail.wlug.org <wlug-request(a)mail.wlug.org> wrote:
From: wlug-request(a)mail.wlug.org <wlug-request(a)mail.wlug.org>
Subject: Wlug Digest, Vol 62, Issue 5
To: wlug(a)mail.wlug.org
Date: Saturday, December 13, 2008, 12:00 PM
Send Wlug mailing list submissions to
wlug(a)mail.wlug.org
To subscribe or unsubscribe via the World Wide Web, visit
http://mail.wlug.org/mailman/listinfo/wlug
or, via email, send a message with subject or body 'help' to
wlug-request(a)mail.wlug.org
You can reach the person managing the list at
wlug-owner(a)mail.wlug.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Wlug digest..."
Today's Topics:
1. Re: Convert Quickbooks to GnuCash (Eric Martin)
2. Re: Convert Quickbooks to GnuCash (Eric Martin)
----------------------------------------------------------------------
Message: 1
Date: Sat, 13 Dec 2008 08:22:16 -0500
From: Eric Martin <freak4uxxx(a)gmail.com>
Subject: Re: [Wlug] Convert Quickbooks to GnuCash
To: Worcester Linux Users Group <wlug(a)mail.wlug.org>
Message-ID: <4943B708.20606(a)gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
John Stoffel wrote:
> Has anyone had success in having Gnucash talk directly to the Bank
> and/or Credit Card company to pull down information, and (ideally)
> push transactions to the bank?
>
> I'm getting sick in tired of my banks web interface, mostly because
> it's such a damn manual process to actually pull down the transactions
> in QIF format.
>
> I'm thinking of moving from BoA to DCU completely, if I can make it
> work. Or to another bank (within reason) to make my life simpler.
> Another goal is to be able to download my Credit Card statements
> automatically each time I fire up GnuCash so I can track those
>
>
I have successfully configured GNUCash to pull down my data from
discover card. Additionally, I download my data from my bank in M$
format (OFX) and it imports perfectly.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 260 bytes
Desc: OpenPGP digital signature
Url :
http://mail.wlug.org/pipermail/wlug/attachments/20081213/ea564f38/attachmen…
------------------------------
Message: 2
Date: Sat, 13 Dec 2008 08:23:09 -0500
From: Eric Martin <freak4uxxx(a)gmail.com>
Subject: Re: [Wlug] Convert Quickbooks to GnuCash
To: Worcester Linux Users Group <wlug(a)mail.wlug.org>
Message-ID: <4943B73D.5010407(a)gmail.com>
Content-Type: text/plain; charset="us-ascii"
An HTML attachment was scrubbed...
URL:
http://mail.wlug.org/pipermail/wlug/attachments/20081213/4631d173/attachmen…
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 260 bytes
Desc: OpenPGP digital signature
Url :
http://mail.wlug.org/pipermail/wlug/attachments/20081213/4631d173/attachmen…
------------------------------
_______________________________________________
Wlug mailing list
Wlug(a)mail.wlug.org
http://mail.wlug.org/mailman/listinfo/wlug
End of Wlug Digest, Vol 62, Issue 5
***********************************
Hi,
Has anyone had a experience migrating from quickbooks to gnucash? I have
been google'ing for the past couple of hours looking for solutions but
have not really found one that works for me. The only one I have found
requires Excel (xl2qif Excel Macro).
-mike