- WLUG - wlug.mailman3.com

Lilo :-)
by doug waud June 27, 2002

June 27, 2002

Hi all On the TV lately I have heard a lot about Lilo. It seems to be in the context of something called Stitch. I am not clear on the details but Stitch apparently is some sort of extraterrestial with a bent to destroying everything it encounters. I assume the reference is, therefore, to Microsoft. The interesting thing about Lilo is that it never seems to be spelled LILO. The first letter is captialized so I assume there is some degree of case sensitivity involved. If any of you can decipher what all of this means perhaps you could fill me in! :-) I do notice that Disney seems to be involved so it would seem that Pixar is not the only place Linux seems to be making inroads. doug

2 2

RE: [Wlug] Installing Redhat on HP machines
by Hemstreet, Jeffrey June 26, 2002

June 26, 2002

Thank you all for your help.... just wanted to let you know the outcome of the installs... On the HP Vectra, there appears to be some hardware issues, as Windows 2K boot floppy fails with a Boot I/O Error. This machine has been suspect, and I will probably scavenge it for parts (CD, Memory) (It has had some intermittent problems finding the HDD.) On the HP Kayak..... it's UP! I downloaded the new boot disk image from the email below, and the install ran without a hitch. It must not like the 7.2 standard boot image since it failed both from the install disk and from the boot floppy I made straight from the CDROM. (This was a CD burned from the WLUG installfest in February and it has installed faithfully on about a dozen machines.) Thank you again. jeff -----Original Message----- From: Charles R. Anderson [mailto:cra@WPI.EDU] Sent: Tuesday, June 25, 2002 7:49 PM To: 'wlug(a)mail.wlug.org' Subject: Re: [Wlug] Installing Redhat on HP machines Have you tried booting the latest errata install disks? You can get them here: ftp://angus.ind.wpi.edu/pub/updates/7.2/en/os/images/i386/boot.img ftp://angus.ind.wpi.edu/pub/updates/7.2/en/os/images/i386/update-disk-200201 17.img Make sure you rawrite/dd them to brand new floppy disks, since if there is even a single byte error on the floppy disk, the install will fail. Boot the first one (boot.img) and see below... On Tue, Jun 25, 2002 at 06:25:44PM -0400, Hemstreet, Jeffrey wrote: jhemstreet> One is an HP Vectra (2Gb IDE, 56MB, P200). I can fdisk and select jhemstreet> packages, but when it goes to jhemstreet> format the disk to install the packages, I get a signal 11 fatal error. I jhemstreet> think there may be something jhemstreet> flaky with this system (HDD or memory problem?) Just wondering if anyone jhemstreet> else has seen this type jhemstreet> of failure and could give me any more insight. I plan on replacing the HDD jhemstreet> to see if that is the problem. It depends. Does the signal 11 always happen at exactly the same point? If so, that doesn't necessarily point to flakey hardware, but rather a software bug. If it IS random, then it does sound like a memory error. You can test your RAM with memtest86, available here: http://www.memtest86.com/ Another thing you can try is making sure the amount of memory is detected correctly by Linux (check the boot up messages of the Linux kernel). If not, you can force the correct amount by appending the mem option to the linux boot command line: linux updates mem=56M You need the "updates" bit to use the update-disk mentioned earlier. Insert the updates disk when it asks. jhemstreet> The other is a dual-300 PII HP Kayak with a SCSI Drive. I get a boot error jhemstreet> when trying to boot from the jhemstreet> CDROM or Install Disk. This system is currently running NT 5. Any ideas jhemstreet> why the boot would fail? Bad floppy disk and/or CD-ROM? How did you acquire your Red Hat 7.2 CD-ROM? If it isn't an official disk, then it might have been burned incorrectly. Red Hat recommends burning ISO's in Disk-At-Once mode, and checking the images and disks with md5sum to be sure they burned correctly. -- Charles R. Anderson <cra(a)wpi.edu> / http://angus.ind.wpi.edu/~cra/ PGP Key ID: 49BB5886 Fingerprint: EBA3 A106 7C93 FA07 8E15 3AC2 C367 A0F9 49BB 5886 _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

Installing Redhat on HP machines
by Hemstreet, Jeffrey June 26, 2002

June 26, 2002

I am having a problem installing Redhat 7.2 on 2 different HP machines. I thought I might be able to get some information from the plethera of people who have done installs. Or any ideas on what to do next? One is an HP Vectra (2Gb IDE, 56MB, P200). I can fdisk and select packages, but when it goes to format the disk to install the packages, I get a signal 11 fatal error. I think there may be something flaky with this system (HDD or memory problem?) Just wondering if anyone else has seen this type of failure and could give me any more insight. I plan on replacing the HDD to see if that is the problem. The other is a dual-300 PII HP Kayak with a SCSI Drive. I get a boot error when trying to boot from the CDROM or Install Disk. This system is currently running NT 5. Any ideas why the boot would fail? Thanks, jeff

5 5

RE: [Wlug] Who is port scanning me?
by Simoncini, Matthew June 25, 2002

June 25, 2002

Hi again, Over the weekend, I received some "creative" feedback and all of it is appreciated. Why question was intended to find an easy way to track down the owner of an IP address within our corporate network (unregistered with DNS/WINS). Not to hack, crack, spam, or DOS them, but to gain information on that particular node. I have to bring this IP address to the attention of our Security Team, but wanted more information to give them. Given all the feedback, it seems easier just to contact the Security Team and let them figure this out. Thanks again for your time. Matthew -----Original Message----- From: Phillip G Deneault [mailto:deneault@WPI.EDU] Sent: Sunday, June 23, 2002 9:27 PM To: wlug(a)mail.wlug.org Subject: Re: [Wlug] Who is port scanning me? Chances are the machine that is performing the portscan is hacked himself. It does no good to "hack them back" because your not hacking the hackers...your hacking the hack. :-) On top of that, you'll only cloud the issue and, if the matter is taken to the authorities, you could also get in trouble. Not to mention the entire concept of hacking without authorization is unethical and illegal. I'm going to go say its not worth it. This does happen constantly if your connected to the Internet. Your best offense is a good defense. Phil On Sun, 23 Jun 2002, Michael Frysinger wrote: > try and hack them back???????? > or just move on because it doesnt matter that much. > in the real world that shit happens all the time > -mike > > On Sunday 23 June 2002 08:42 am, David Goss wrote: > > and if it is a hacker???... what's the best way to send them back a little > > something to let them know you care??? > > > > dave goss > > > > > > ----- Original Message ----- > > From: "George Metz" <wolfstar(a)shadownet.wox.org> > > To: <wlug(a)mail.wlug.org> > > Sent: Sunday, June 23, 2002 12:49 AM > > Subject: Re: [Wlug] Who is port scanning me? > > > > > On Fri, 21 Jun 2002, Simoncini, Matthew wrote: > > > > Hi everyone, > > > > > > > > I'm constantly getting port scanned from a certain IP address on our > > > > internal corporate network. I'd really like to find out where and who > > > > this > > > > > > person is, but don't know much outside of ping, traceroute, nslookup, > > > > etc > > > > > > .... I was wondering if anyone knows of any tools that can get me more > > > > information on this person? This happens to be on our private network, > > > > so > > > > > > most internet tools I don't think will help much. > > > > > > If it's on your internal net, then talking to the network admins for your > > > site should give you a good idea of where they're at and why they're > > > doing it. > > > > > > If there's no network admin on site, then you'll have to do some footwork > > > yourself. The suggestion to use IPTables to ignore data from that address > > > is a good one if possible; you might even be able to track down the > > > culprit when they suddenly can't access your system anymore and ask why. > > > (Possible if it's a somehow compromised system on the internal network.) > > > > > > Another possibility is using host or nslookup if you've got internal > > > nameservers behind whatever's running your NAT setup (I'm making the > > > assumption that you're running NAT if you're on a private net.) > > > > > > If you happen to be the guy who's had Network admin position shoved upon > > > you, then you can try getting a null route added to the router for your > > > net connection at work and use that to see who complains about a sudden > > > lack of net access too, but I'd definitely be careful of that method. =) > > > > > > -- > > > George Metz > > > Commercial Routing Engineer > > > wolfstar(a)shadownet.wox.org > > > > > > "We know what deterrence was with 'mutually assured destruction' during > > > the Cold War. But what is deterrence in information warfare?" -- > > > Brigadier General Douglas Richardson, USAF, Commander - Space Warfare > > > Center > > > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Phil Deneault "We work in the dark, We do what we can, deneault(a)wpi.edu We give what we have. Our doubt is our passion, WPI NetOps and our passion is our task. The rest is the OpenVMS Guy maddness of art." - Henry James -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

3 2

fsck, segmantation fault, etc.
by Baris Hasdemir June 24, 2002

June 24, 2002

Hi, I bought a new hard drive, Maxtor 7200 RPM, ATA133, 40GB, and began using it at ATA100. I formatted my /dev/hda5 with mkfs.ext2 and mounted it under /home. I have been using this mount with the Slackware 8.0 at /dev/hda6 for several days without any problems. Two days ago I installed Slackware8.1 on /dev/hda8 and used the same device mounted to /home. (/dev/hda5) Yesterday under root privileges I attempted to delete a user's two big files, and got the following error (or warning, I don't know): root@penguen:/home/avci# rm more_than_700MB_files* EXT2-fs error (device ide0(3,5)): ext2_free_blocks: Freeing blocks not in datazone - block = 1083636778, count = 1 EXT2-fs error (device ide0(3,5)): ext2_free_blocks: Freeing blocks not in datazone - block = 1083606420, count = 1 EXT2-fs error (device ide0(3,5)): ext2_free_blocks: Freeing blocks not in datazone - block = 1083602068, count = 1 EXT2-fs error (device ide0(3,5)): ext2_free_blocks: Freeing blocks not in datazone - block = 1083602292, count = 1 root@penguen:/home/avci# ls -al total 24 drwx--x--x 2 avci misafir 4096 Jun 23 12:47 ./ drwxr-xr-x 10 root root 4096 Feb 25 2001 ../ -rw------- 1 avci misafir 36 Jun 17 17:26 .bash_history -rw-r--r-- 1 avci misafir 34 Jun 17 16:44 .less -rw-r--r-- 1 avci misafir 114 Jun 17 16:44 .lessrc -rw-r--r-- 1 avci misafir 3394 Jun 17 16:44 .screenrc However, rm deleted the files. But I couldn't understand the warning. And then, just because of curiosity I tried to copy one of the same big files from another partition to the same location, and cp gave out those: root@penguen:/home/avci# time cp /mnt/hda10/one_of_the_big_files . Unable to handle kernel NULL pointer dereference at virtual address 00000004 *pde = 00000000 Oops: 0002 CPU: 0 EIP: 0010:[<c0128240>] Tainted: P EFLAGS: 00010046 eax: cbf58000 ebx: 00000003 ecx: ca000000 edx: 00000000 esi: c1405e50 edi: 00000202 ebp: c12f1f80 esp: c14e7efc ds: 0018 es: 0018 ss: 0018 Process kswapd (pid: 4, stackpage=c14e7000) Stack: ca000240 cbe9b8c0 cbe9bb40 c12f1f80 c0130f12 c1405e50 ca000240 c0132a9c ca000240 ca000240 c12f1f80 000001d0 00000009 00000200 c013118c c12f1f80 000001d0 cbe9bb40 c12f1f80 c0128f62 c12f1f80 000001d0 00000020 000001d0 Call Trace: [<c0130f12>] [<c0132a9c>] [<c013118c>] [<c0128f62>] [<c01291a6>] [<c012921c>] [<c01292b3>] [<c0129316>] [<c012942d>] [<c0105708>] Code: 89 42 04 89 10 8b 46 08 89 48 04 89 01 8d 56 08 89 51 04 89 real 0m54.986s user 0m0.060s sys 0m7.330s And then of course I did a couple of fsck on this partition after unmounting. first one quitted after several error correcting, second fsck did segmentation fault but the last one did finish fsck. and lots of error were corrected. It might give an idea if I mount it like this #mount /dev/hda5 /home file names appear as $@#$#%#$ etc. but if I mount it like that #mount /dev/hda5 /home -t ext2 no problem seem to occur. I am thinking about whether I did something missing at the fdisk stage or formatting stage. Or is my new hard disk a dead-born? Or any other things you may notice? thank you, baris

2 2

Who is port scanning me?
by Simoncini, Matthew June 24, 2002

June 24, 2002

Hi everyone, I'm constantly getting port scanned from a certain IP address on our internal corporate network. I'd really like to find out where and who this person is, but don't know much outside of ping, traceroute, nslookup, etc .... I was wondering if anyone knows of any tools that can get me more information on this person? This happens to be on our private network, so most internet tools I don't think will help much. Thanks for your time. Matthew

6 5

Re: [Wlug] Who is port scanning me?
by Joe Riopel June 21, 2002

June 21, 2002

You could download Sam Spade ( I only know of a windows version ). It will give you a good amount of information about an IP address. -Joe

1 0

Re: [Wlug] Who is port scanning me?
by Peter Gutowski June 21, 2002

June 21, 2002

On Friday, June 21, 2002 4:24 PM, Simoncini, Matthew <Matthew.Simoncini(a)bsci.com> wrote: >Hi everyone, > >I'm constantly getting port scanned from a certain IP address on our >internal corporate network. I'd really like to find out where and who this >person is, but don't know much outside of ping, traceroute, nslookup, etc >.... I was wondering if anyone knows of any tools that can get me more >information on this person? This happens to be on our private network, so >most internet tools I don't think will help much. > >Thanks for your time. > >Matthew >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug > With iptables (upgrade to ipchains and so much more sophisticated) installed you can configure it to ignore *any* packet sent from that machine [defining it by IP address or MAC address] -- responding (or not, this case) as if your computer were turned off. Works for me. -- Peter Gutowski <peter(a)linuxchamps.com> // tel.: (413) 531-0123 "When in company, put not your hands to any part of the body not usually discovered." --George Washington, _Rules for Civility and Decent Behavior_

1 0

browser war
by Karl Hiramoto June 20, 2002

June 20, 2002

A co-worker wanted help checking his AOL e-mail. He would usually use M$ IE to longin to the AOL webmail. M$ IE now crashes on the webmail page. It is unuseable in most cases. I installed netscape 6.2.3 the AOL webmail page works 100%. So the Netscape/AOL time warner broswer works there. return of the browser wars. -- ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø Karl Hiramoto <karl(a)hiramoto.org> Work: 978-425-2090 ext 25 Cell: 508-517-4819 Personal web page: http://karl.hiramoto.org/ Zoop Productions: http://www.zoop.org/ KTEQ Rapid City: http://www.kteq.org/ AOL IM ID = KarlH420 Yahoo_IM = karl_hiramoto ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø PENGUINICITY!!

3 2

XO goes Chapter 11...
by Stephen C. Daukas June 19, 2002

June 19, 2002

Thought I'd pass this along in case anyone out there is thinking of going with XO Communications. http://www.xo.com/news/restructuring_update.html

2 1

Boston Globe article
by Bill Mills-Curran June 18, 2002

June 18, 2002

http://digitalmass.boston.com/news/globe_tech/at_large/2002/0617.html Today's edition of the Boston Globe has an article about collaborative tools. Featured in the article is a product called SiteScape which I had seemed demo'd just last week. Many of the features of the collaborative tool set are familiar to me in other settings: email, IRC (for "immediate" stuff), news (for discussions) and version control to track document modifications. One feature they mentioned that I have not encountered in the UNIX/Linux/Gnu world is a collaborative whiteboard that allows different users to share an electronic whiteboard. Has anyone seen anything like this in the open source community? Ideally, it would be web-based so that it would not be specific to any one client OS. Thanks, Bill

3 3

Laptop question - screen resolution
by Andy Stewart June 18, 2002

June 18, 2002

HI WLUG, My laptop has a 15" screen rated for 1024x768. I setup my laptop to have 3 resolutions in my XF86Config file: 1024x768 (default) 800x600 640x480 With XFree86 4.x, it appears that I don't explicitly need to specify a mode line any more (but I can if I wish). SuSE's configuration process puts a mode line in for me. When I run X and then run xvidtune, when I'm in 1024x768 mode, it indicates a refresh of 60 Hz. However, when I run in 800x600 mode, xvidtune thinks the refresh rate is around 90Hz, and in 640x480 mode, xvidtune thinks the refresh rate is 131 Hz(!). I'm not sure I believe it since I don't think the display can handle that (but if it is true, am I seriously overdriving the display?). Also note that in the lower resolution modes, the display actually looks a tad fuzzy. I am not using anti-aliased fonts. Is this normal for laptops or am I doing something wrong? Thanks, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

4 3

Javascript Help
by Wesley Allen June 18, 2002

June 18, 2002

Guys, My Javascript + dhtml has always been one great hack. And, unlike the other scripting languages I use (all open source) there just doesn't seem to be a great "javascript community" on the web. Just lots of free samples (yes, i've googled, maybe not enough). Here's my problem. I've got a table and I want one column to be used to display the different links in each area. If I mouse over "about us" I want the other table to display the links for that area. when I do this outside a table, I just create a bunch of <div>'s that are hidden, and just Javascript to make them visible and raise their z-index at the proper time (yes, terrible hack, my javascript sucks). In the table, I'm not sure how to "stack" the different <div>'s. I though relative positioning would do the trick, because the parent for all of the <div>'s should be the <td> tag, but instead the <div>'s relatively position to one another. So, I'm kinda stuck. Any help you can give would be great, web sites with tutorials are great too. Pre-made scripts are ok, but I'm actually trying to learn something here. Thanks, Wes

2 2

Xmon / Serial cable
by Skip Gaede June 17, 2002

June 17, 2002

Folks, I'd like to try my hand at debugging the kernel boot process on a Macintosh PPC. I have a couple of silly questions, though. 1) Can I debug a Mac from an x86 box using Xmon? 2) I need a null modem cable to connect my Athlon and my Mac. Any thoughts as to where I could buy such a beast, or how to wire one up from parts obtained from Radio Shack? Thanks, Skip

2 2

RE:[SOLVED] [Wlug] Burning ISO's
by Simoncini, Matthew June 17, 2002

June 17, 2002

Thanks everyone for their input and offers for burning 7.3 to CD's. I actually found what I needed with the existing burn software I have. It was under "Global Image or Other Image", in my case ISO is Other Image. -----Original Message----- From: David Goss [mailto:vze2bd6u@verizon.net] Sent: Friday, June 14, 2002 9:30 PM To: wlug(a)mail.wlug.org Subject: Re: [Wlug] Burning ISO's i've got 73 on cd if you need a copy... but from what i've seen so far don't rush into anyuthing... 72 with a couple kernal upgrades runs just as well... assimilation is futile dave goss ----- Original Message ----- From: "Keller, Tim" <Tim.Keller(a)stratus.com> To: <wlug(a)mail.wlug.org> Sent: Thursday, June 13, 2002 1:50 PM Subject: RE: [Wlug] Burning ISO's > Your other solution might be to bribe a member of wlug to make a copy of > their 7.3 disks in exchange for a free beer after the meeting tonight. > > unfortunately, 1. I don't drink beer and 2. I won't be able to attend, > otherwise I'd make a copy for you... > > Later, > Tim. > > -----Original Message----- > From: Simoncini, Matthew [mailto:Matthew.Simoncini@bsci.com] > Sent: Thursday, June 13, 2002 12:55 PM > To: 'wlug(a)mail.wlug.org' > Subject: [Wlug] Burning ISO's > > > Hi everyone, > > I recently downloaded the iso's for Red Hat 7.3 and wanted to burn them to > CD so I can install the distro on my home PC. I've never burned iso's > before, so this is new to me. I have the following setup: > > Work PC running Windows 2000 w/ iso images for Red Hat 7.3 saved to hard > drive > CD Burner > Prassi PrimoCD Plus 2.0 burner software by Veritas > > From the little that I know, I understand that iso images need to be burned > in a certain way rather than just copied to a CD-ROM. Can anyone point me to > a site or a particular program for burning iso's? > > Thanks. > > Matthew > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

JavaScript Help
by Wesley Allen June 16, 2002

June 16, 2002

OK, here is my hack of a function (I'll make it better later). Right now, it works in mozilla and Konqueror; but not IE. Anyone out there know Javascript well enough to tell me how to make this cross-browser? function changeMap(map) { if (map == 1) { document.bingo.setAttribute("usemap","#map1"); } else if(map == 2){ document.bingo.setAttribute("usemap","#map2"); } } Thanks, Wes

1 0

RedFlag Linux
by Andy Stewart June 16, 2002

June 16, 2002

HI gang, I downloaded a copy of RedFlag Linux last night (straight from China) for a friend. I tried to run it on VMware, but it immediately wants to enable the frame buffer device and VMware doesn't seem to support that. On another old machine, it can't handle my ancient PAS16 SCSI controller as part of the installation process. I ran it part way on my laptop to get to the installation screen, so I know the CD works. (I have a low quality screenshot if anybody is interested). I'd be interested to see it running, even though I can't read Chinese. If anybody wants a copy, let me know and I'll make you one. Later, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

1 0

Fwd: GNHLUG Quarterly Meeting Rescheduled to 10 July 2002
by Andy Stewart June 15, 2002

June 15, 2002

---------- Forwarded Message ---------- Subject: GNHLUG Quarterly Meeting Rescheduled to 10 July 2002 Date: Fri, 14 Jun 2002 15:32:55 -0400 From: pll(a)lanminds.com To: gnhlug-announce(a)zk3.dec.com Hi all, Ximian has requested a rescheduling of our 26 June meeting to 10 July because Nat is unable to make the original date due to travelling conflict. Everyone who contacted me believed rescheduling the date was preferable to continuing without Nat and the Mono talk. For all those already registered, there is no need to re-register. If you will be unable to make the new 10 July date and have registered, please contact me privately at: pll+gnhlug at NoSpam lanminds dot com and I will remove you from the rsvp list. If you have not yet registered, and wish to do so, the registration form can be found here: http://md.appropriatesolutions.com/gnhlug/register.html I apologize for the inconvenience, and thanks for your co-operation. -- Seeya, Paul Paul Lussier Senior Systems and Network Engineer Co-Chairman, Greater New Hampshire Linux User's Group (GNHLUG) Chairman, Nashua Chapter GNHLUG http://www.gnhlug.org Events: http://md.appropriatesolutions.com/gnhlug/lug_cal/month.php ------------------------------------------------------- -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

1 0

RE: [Wlug] Xmon / Serial cable
by Evans, Robert June 15, 2002

June 15, 2002

To answer question 2... A search for "null modem cable" on google will give you lots of good hits. For local kernel debug, you might just need to connect: Athlon Mac ground to ground txd to rxd rxd to txd If that is not enough, handshaking might require additional connections. There are variations, but I have had success, in other applications, with this handshaking setup: dtr to cd & dsr cd & dsr to dtr rts to cts cts to rts On a 9-pin connector: 1 = cd 2 = rxd 3 = txd 4 = dtr 5 = ground 6 = dsr 7 = rts 8 = cts 9 = ri You can probably buy a null modem cable at radio shack. It might also be sold as a lap-link serial cable. Be sure that the sex (protruding pins vs. recepticle) of the connector on the cable matches that on the computer you will connect to. Robert N. Evans Software Engineer S T R A T U S T E C H N O L O G I E S 111 Powdermill Road, Maynard, MA 01754-3409 U.S.A. * Tel. 978-461-7680 / * Fax. 978-461-3610 robert.evans(a)stratus.com Amateur Radio Call: N1BE -----Original Message----- From: Skip Gaede [mailto:sgaede@attbi.com] Sent: Friday, June 14, 2002 6:58 AM To: wlug(a)mail.wlug.org Subject: [Wlug] Xmon / Serial cable Folks, I'd like to try my hand at debugging the kernel boot process on a Macintosh PPC. I have a couple of silly questions, though. 1) Can I debug a Mac from an x86 box using Xmon? 2) I need a null modem cable to connect my Athlon and my Mac. Any thoughts as to where I could buy such a beast, or how to wire one up from parts obtained from Radio Shack? Thanks, Skip _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

3 2

RE: [Wlug] Burning ISO's
by Keller, Tim June 15, 2002

June 15, 2002

Your other solution might be to bribe a member of wlug to make a copy of their 7.3 disks in exchange for a free beer after the meeting tonight. unfortunately, 1. I don't drink beer and 2. I won't be able to attend, otherwise I'd make a copy for you... Later, Tim. -----Original Message----- From: Simoncini, Matthew [mailto:Matthew.Simoncini@bsci.com] Sent: Thursday, June 13, 2002 12:55 PM To: 'wlug(a)mail.wlug.org' Subject: [Wlug] Burning ISO's Hi everyone, I recently downloaded the iso's for Red Hat 7.3 and wanted to burn them to CD so I can install the distro on my home PC. I've never burned iso's before, so this is new to me. I have the following setup: Work PC running Windows 2000 w/ iso images for Red Hat 7.3 saved to hard drive CD Burner Prassi PrimoCD Plus 2.0 burner software by Veritas

2 1

Burning ISO's
by Simoncini, Matthew June 13, 2002

June 13, 2002

Hi everyone, I recently downloaded the iso's for Red Hat 7.3 and wanted to burn them to CD so I can install the distro on my home PC. I've never burned iso's before, so this is new to me. I have the following setup: Work PC running Windows 2000 w/ iso images for Red Hat 7.3 saved to hard drive CD Burner Prassi PrimoCD Plus 2.0 burner software by Veritas

2 1

aliases with sendmail.
by Karl Hiramoto June 13, 2002

June 13, 2002

I have a mail server setup with sendmail 8.11.6 (redhat 7.2) that recieves mail for multiple domains. What I am trying to setup is this: sales(a)host1.com forwards to user1's inbox sales(a)host2.com forwards to user2's inbox Is this possible with sendmail? I've trid doing it in the /etc/aliases file and had no luck. when I run the newaliases command it gives me a warning and it doesn't work corectly when I tested it. I would prefer not to have to install qmail or some other mail server. -- ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø Karl Hiramoto <karl(a)hiramoto.org> Work: 978-425-2090 ext 25 Cell: 508-517-4819 Personal web page: http://karl.hiramoto.org/ Zoop Productions: http://www.zoop.org/ KTEQ Rapid City: http://www.kteq.org/ AOL IM ID = KarlH420 Yahoo_IM = karl_hiramoto ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø Q: What's the difference between a dead dog in the road and a dead lawyer in the road? A: There are skid marks in front of the dog.

2 2

Permission Problems Accessing Server-based NFS Share
by James E. Rame June 13, 2002

June 13, 2002

Help! I want to set up my home network so that I can access my files stored on the server (Mandrake 8.0) from my client machine (RedHat 7.3) using NFS. I configured /etc/export on the server side and made certain that both nfs-utils and portmap were running on the server. I proceeded to mount the exported directory at a mount point I set up on the client machine without a problem. But, when I tried to access an exported NFS share on my server machine from my client machine, I got a "permission denied" error message. On accessing the client-side mount point, I see the subdirectories but they are noted to be locked. I was eventually able to get access to the directory but only by going into the server and enabling read, write and execute privileges for "others." Might someone out there have another solution? Is there something else I can do to solve this problem without having to leave read, write and execute privileges on the directory to such a broad class of users? Jim

2 1

RE: [Wlug] Permission Problems Accessing Server-based NFS Share
by Simoncini, Matthew June 13, 2002

June 13, 2002

<snip> >Might someone out there have another solution? Is there something else >I can do to solve this problem without having to leave read, write and >execute privileges on the directory to such a broad class of users? On the server, what are the user:groups assigned? Do you have the same user/group created on each server/workstation with the same UID and GID? Just a couple of things to think about. Matthew _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

Fwd: 2nd Quarter GNHLUG Meeting - Wednesday, 26 June 2002
by Andy Stewart June 13, 2002

June 13, 2002

---------- Forwarded Message ---------- Subject: 2nd Quarter GNHLUG Meeting - Wednesday, 26 June 2002 Date: Wed, 12 Jun 2002 13:24:10 -0400 From: pll(a)lanminds.com To: andystewart(a)attbi.com (Andy Stewart) Hi Andy, I just sent this out to GNHLUG today, feel free to send it WLUG! 8<----------------------8<----------------------8<----------------------8<--- - PLEASE REGISTER IF YOU ARE PLANNING ON ATTENDING: http://md.appropriatesolutions.com/gnhlug/register.html Who: All GNHLUG members, the general public, and anyone else who wants to come along. What: 2nd Quarterly meeting When: 19:30ish, 26 June 2002 Where: Daniel Webster College 20 University Drive Nashua, NH 03063 Why: Ximian Co-Founder and VP of Product Development Nat Friedman and friends will be coming to speak to us about GNOME and Ximian. Directions: http://www.dwc.edu/admissions/directions.asp A campus "map" is at this URL: http://web.dwc.edu/CampusMap/campus_map.html but do not expect to print it off at the last minute, as it is an "active" map, and does not show building names until you touch them with your mouse. A nice idea, but I would have been happy if a good old-fashioned 2-D map was also supplied. PLEASE REGISTER IF YOU ARE PLANNING ON ATTENDING: http://md.appropriatesolutions.com/gnhlug/register.html 8<----------------------8<----------------------8<----------------------8<--- - Thanks! -- Seeya, Paul Paul Lussier Senior Systems and Network Engineer Co-Chairman, Greater New Hampshire Linux User's Group (GNHLUG) Chairman, Nashua Chapter GNHLUG http://www.gnhlug.org Events: http://md.appropriatesolutions.com/gnhlug/lug_cal/month.php ------------------------------------------------------- -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

1 0