- WLUG - wlug.mailman3.com

Problem with wireless access point(?)
by Andy Stewart 31 Dec '09

31 Dec '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi gang, I just purchased a Linksys WRT54GL wireless access point. Currently, it is running the stock firmware (upgraded to the latest version). I may put Linux on it sometime in the near future. While I can get connected to it with my Linux laptop, I notice that file transfers start at a screamingly fast rate, and within a minute or two, drop to barely a trickle. When I used an entirely hard wired connection, I have no such problem. Has anybody else noticed this with the Linksys WRT54GL? If so, will the Linux software solve this problem? I don't believe that the problem lies with the wireless hardware/software in my laptop since I have used it on other wireless access points without problems. Thanks, Andy - -- Andy Stewart (KB1OIQ) Founder: Worcester Linux Users' Group Founder: Chelmsford Linux Meetup Group President: PART of Westford, MA (WB1GOF) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFLOmdpOjiraCaOTOoRAqsRAKDjaKrNykXKburz0IozXi8bQn1nfACgj66G oJqD9jfjXolyrVPLN3lDFOY= =6xJa -----END PGP SIGNATURE-----

5 14

Re: [Wlug] Wlug Digest, Vol 74, Issue 14
by Karl Lind 31 Dec '09

31 Dec '09

Karl had posted an answer about the Linksys (under the subject line "Re: [Wlug] Wlug Digest, Vol 74, Issue 13") One comment in there I found very interesting: > Now this is going to blow your mind, but if there is ANY difference in the Workgroup name between the router and the computers, it causes the router to "restrict" bandwidth. Does this only apply to various forms of filesharing, or to all wireless traffic through the WRT54GL? I (and my housemates) are not doing big downloads, and not using Samba. Maybe one of the Windows PCs here might occasionally d/l a movie. But in experimenting with wireless here, using one or other of my Debian PCs, Tomato on the Linksys, I also thought the wireless worked rather slow, even though we have a +20MBps connection. Mostly what I was doing was browsing. Do all computers using wireless here have to belong to the same Workgroup, no matter what kind of internet traffic they're doing? If I do need a Workgroup name for the router, how do I do that? Thanks, Liz J Hi Liz What's humorous is the difference between the words "Default" and "default". Most routers may allow you to log on, but subsequent packets of data may not verify correctly, hence the speed loss. As noted by Andy, wireless always defaults to the slowest speed connected. (I seem to have a lot of neighbors that try to break in to my network and when they do at G, B or even A speed the router slows and that tells me that somethings up and I can do something about it.) Karl

2 1

Re: [Wlug] Wlug Digest, Vol 74, Issue 13
by Karl Lind 31 Dec '09

31 Dec '09

FYI WRT54GL Linksys released the *WRT54GL* in 2005 to support third-party firmware based on Linux <http://en.wikipedia.org/wiki/Linux_kernel>, after the original WRT54G line was switched from Linux to VxWorks<http://en.wikipedia.org/wiki/VxWorks>, starting with version 5. The WRT54GL is technically a reissue of the version 4 WRT54G. Cisco was sued by the FSF<http://en.wikipedia.org/wiki/FSF_vs._Cisco>for copyright infringement, but the case was settled. [6]<http://en.wikipedia.org/wiki/Linksys_WRT54G_series#cite_note-GPLInfringemen…> Version [image: ↓] <http://en.wikipedia.org/wiki/Linksys_WRT54G_series#> CPU <http://en.wikipedia.org/wiki/Central_processing_unit> speed [image: ↓]<http://en.wikipedia.org/wiki/Linksys_WRT54G_series#> RAM <http://en.wikipedia.org/wiki/RAM> [image: ↓]<http://en.wikipedia.org/wiki/Linksys_WRT54G_series#> Flash memory <http://en.wikipedia.org/wiki/Flash_memory> [image: ↓]<http://en.wikipedia.org/wiki/Linksys_WRT54G_series#> S/N <http://en.wikipedia.org/wiki/Serial_number> Prefix [image: ↓]<http://en.wikipedia.org/wiki/Linksys_WRT54G_series#> Notes [image: ↓] <http://en.wikipedia.org/wiki/Linksys_WRT54G_series#> 1.0 200 MHz 16 MB 4 MB CL7A New model line, released after the version 5 WRT54G, which returns to a Linux-based OS as opposed to the VxWorks firmware. SpeedBooster <http://en.wikipedia.org/wiki/SpeedBooster> is not enabled in stock firmware, however third-party firmware will enable the feature. The hardware is essentially the same as the WRT54G version 4.0. One alteration is that the internal numbering scheme of the 4-port switch changed in this model, from 1 2 3 4, to 3 2 1 0. 1.1 200 MHz 16 MB 4 MB CL7B CL7C As of August, 2009, this version was shipping with firmware revision 4.30.11. This pre-loaded firmware allows the user to upload a 4MB firmware image, whereas the pre-loaded firmware on version 1.0 limited the image to 3MB. Firmware version 4.30.13 is now available for both hardware versions. Fully supported by Tomato <http://en.wikipedia.org/wiki/Tomato_Firmware>, Sveasoft<http://en.wikipedia.org/wiki/Sveasoft>, OpenWrt <http://en.wikipedia.org/wiki/OpenWrt>, and DD-WRT<http://en.wikipedia.org/wiki/DD-WRT> . Hardware versions affect firmware compatibility As of January 2006, most third-party firmware is no longer compatible with version 5 of both the WRT54G and the WRT54GS. The amount of flash memory in the version 5 devices has been reduced to 2 MB, too small for current Linux-based third-party firmware. (See table above for information on identifying the version based on the serial number printed on the bottom of the unit, and on the outside of the shrink-wrapped retail box.) Some users have succeeded in flashing and running a stripped down but fully functional version of DD-WRT called 'micro' on a version 5 WRT54G.[21]<http://en.wikipedia.org/wiki/Linksys_WRT54G_series#cite_note-20> [22] <http://en.wikipedia.org/wiki/Linksys_WRT54G_series#cite_note-21> An easier method not requiring any disassembly of the device has since been devised for flashing v5-v8 to DD-WRT.[23]<http://en.wikipedia.org/wiki/Linksys_WRT54G_series#cite_note-22> [24] <http://en.wikipedia.org/wiki/Linksys_WRT54G_series#cite_note-23> To support third-party firmware, Linksys has re-released the WRT54G v4, under the new model name *WRT54GL* (the 'L' in this name allegedly stands for 'Linux'). It is also possible to replace the 2MB flash chip in the WRT54G with a 4MB flash chip. The Macronix International 29LV320BTC-90 is a suitable part although others may work as well. The user must first install a JTAG header <http://en.wikipedia.org/wiki/JTAG_header> and use a JTAG cable to backup the firmware,then replace the chip and restore the firmware with the JTAG cable. After testing for proper functionality of the modified unit,3rd party firmware can be flashed using the JTAG cable and a suitable image file. Now this is going to blow your mind, but if there is ANY difference in the Workgroup name between the router and the computers, it causes the router to "restrict" bandwidth. Crazy, but true. Also make sure your hardware all matches. (802,11B, G, N) Have you tried disabling DHT and NOT forwarding UDP? (In case it's a memory issue) Just my two cents.... Karl On Wed, Dec 30, 2009 at 12:00 PM, <wlug-request(a)mail.wlug.org> wrote: > Send Wlug mailing list submissions to > wlug(a)mail.wlug.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://mail.wlug.org/mailman/listinfo/wlug > or, via email, send a message with subject or body 'help' to > wlug-request(a)mail.wlug.org > > You can reach the person managing the list at > wlug-owner(a)mail.wlug.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Wlug digest..." > > > Today's Topics: > > 1. Problem with wireless access point(?) (Andy Stewart) > 2. Re: Problem with wireless access point(?) (John Stoffel) > 3. Re: Problem with wireless access point(?) (Andy Stewart) > 4. Re: Problem with wireless access point(?) (John Stoffel) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 29 Dec 2009 15:32:41 -0500 > From: Andy Stewart <andystewart(a)comcast.net> > Subject: [Wlug] Problem with wireless access point(?) > To: Worcester Linux Users Group <wlug(a)mail.wlug.org> > Message-ID: <4B3A6769.8080701(a)comcast.net> > Content-Type: text/plain; charset=ISO-8859-1 > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > Hi gang, > > I just purchased a Linksys WRT54GL wireless access point. Currently, it > is running the stock firmware (upgraded to the latest version). I may > put Linux on it sometime in the near future. > > While I can get connected to it with my Linux laptop, I notice that file > transfers start at a screamingly fast rate, and within a minute or two, > drop to barely a trickle. > > When I used an entirely hard wired connection, I have no such problem. > > Has anybody else noticed this with the Linksys WRT54GL? If so, will the > Linux software solve this problem? > > I don't believe that the problem lies with the wireless > hardware/software in my laptop since I have used it on other wireless > access points without problems. > > Thanks, > > Andy > > - -- > Andy Stewart (KB1OIQ) > Founder: Worcester Linux Users' Group > Founder: Chelmsford Linux Meetup Group > President: PART of Westford, MA (WB1GOF) > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.2 (GNU/Linux) > Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org > > iD8DBQFLOmdpOjiraCaOTOoRAqsRAKDjaKrNykXKburz0IozXi8bQn1nfACgj66G > oJqD9jfjXolyrVPLN3lDFOY= > =6xJa > -----END PGP SIGNATURE----- > > >

1 0

REMINDER: WLUG Meeting on Thursday
by Andy Stewart 16 Dec '09

16 Dec '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Everybody, Our regularly scheduled monthly WLUG meeting will be held this coming Thursday at 7:00 PM on the WPI Campus. We'll be in the same room as the last couple of months (and soon I'll have to figure out what to call this room). If you come into the Wedge between Morgan Hall and Daniels Hall, you will see signs directing you to the meeting. See ya there! Andy - -- Andy Stewart (KB1OIQ) Founder: Worcester Linux Users' Group Founder: Chelmsford Linux Meetup Group President: PART of Westford, MA (WB1GOF) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFLKETFOjiraCaOTOoRAopQAKCOgU1nejHhTpiEtBzhckrFh5CklgCg4qig avz63VDAYiIIfaUhSBJQyWU= =0RbS -----END PGP SIGNATURE-----

2 1

Mounting Windows Shares on Solaris
by Chuck Noyes 15 Dec '09

15 Dec '09

Hi All, Maybe a bit [OT], but I've got a Solaris 10u8 host, and I'd like to be able to mount a Windows share on the Solaris box. I don't think Solaris supports the smbfs or cifs file systems (at least I can't find any evidence of it). So a command like: "mount -F smbfs //windows-host/share /mnt" won't work. Has anyone done this? I've installed all the samba executables in /usr/bin and in /usr/sbin on the Solaris box, so there is samba support in Solaris, but I can't seem to mount the Windows share. TIA, -Chuck

5 6

[Fwd: Holiday Greetings & a Special User Group Offer from Wiley Publishing]
by Andy Stewart 14 Dec '09

14 Dec '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 - -------- Original Message -------- Subject: Holiday Greetings & a Special User Group Offer from Wiley Publishing Date: Mon, 14 Dec 2009 14:22:08 -0500 From: partnerwithwileytech <partnerwithwileytech(a)wiley.com> Happy Holidays from Wiley Publishing! To celebrate, we would like to offer your user group 40% off of the following Linux titles. Please refer to the bottom of this email for promo code and offer details. *ISBN* *Title* 9780470467015 Linux For Dummies, 9th Edition 9780470345207 Ubuntu Linux : Your visual blueprint to using the Linux operating system 9780470485057 Linux Bible 2010 Edition : Boot Up to Ubuntu, Fedora, KNOPPIX, Debian, openSUSE, and 13 Other Distributions 9780470584583 Professional Ubuntu Mobile Development 9780470294208 Ubuntu 8.10 Linux Bible 9780470395080 Ubuntu Linux Secrets 9780470467893 Ubuntu Linux Toolbox: 1000+ Commands for Ubuntu and Debian Power Users 9780470481653 CentOS Bible 9780470554043 Linux For Dummies, 9th Edition (ebook) 9780470497975 Ubuntu Linux: Your visual blueprint to using the Linux operating system (ebook) 9780470602423 Linux Bible 2010 Edition : Boot Up to Ubuntu, Fedora, KNOPPIX, Debian, openSUSE, and 13 Other Distributions (ebook) 9780470502747 Ubuntu 8.10 Linux Bible (ebook) 9780470497869 Ubuntu Linux Secrets (ebook) 9780470538333 CentOS Bible (ebook) english.jpg <http://www.wiley.com/college/test/xmascard/xmas_eCard_english/> If you have trouble viewing this message, paste this URL into your web browser. http://www.wiley.com/college/test/xmascard/xmas_eCard_english/ Offer valid at wiley.com (US only) for 40% off of mentioned titles. Please use promo code *LIN10*.* *Offer valid from December 15^th , 2009-January 31^st , 2010. - -- Andy Stewart (KB1OIQ) Founder: Worcester Linux Users' Group Founder: Chelmsford Linux Meetup Group President: PART of Westford, MA (WB1GOF) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFLJsgGOjiraCaOTOoRApMKAKCZJa/e37/vc++dI0wbZojJlrrr5ACfUHM0 kgeghBl1yhmH8Kg2uOjoKIk= =/BmN -----END PGP SIGNATURE-----

1 0

GnuPG Documentation
by Gary Hanley 07 Dec '09

07 Dec '09

My head hurts! Can anyone help? :-) I'm googling like crazy but for the life of me can not find any information on the values of the usage flags displayed in GnuPG when you --edit-key and list. For example (from a website): pub 4096R/7C11053D created: 2009-10-12 expires: never usage: SC trust: ultimate validity: ultimate sub 4096R/55D59203 created: 2009-10-12 expires: never usage: E Maybe it's obvious but does anyone know the value of "SC" and "E". And, how about the value of all potential flags? My problem involves other flags. I assumed I could find this in 30 seconds. No go. I can't find anything about key details. So any help would be appreciated. Thanks! -- Gary

2 3

Re: [Wlug] iphone issues, python, server.
by kevin poisant 03 Dec '09

03 Dec '09

Ok, ill use my android for this one. Nix based I'm sure you know. Anyway my newest projects include an openbsd firewall. Either a free or open bsd server for private and a few friends use. My dell laptop is a joke and my debian box is stable for once having troubles with *pythonwx-2.8 and its related packages so playonlinux is not installable till I at least solve the problem. All the gpgkeys are in order and apt-get update etc pulls no errors so the mirror I'm using isn't bad or being ignores. - thanks kevin On Dec 3, 2009 12:00 PM, <wlug-request(a)mail.wlug.org> wrote: Send Wlug mailing list submissions to wlug(a)mail.wlug.org To subscribe or unsubscribe via the World Wide Web, visit http://mail.wlug.org/mailman/listinfo/wlug or, via email, send a message with subject or body 'help' to wlug-request(a)mail.wlug.org You can reach the person managing the list at wlug-owner(a)mail.wlug.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Wlug digest..." Today's Topics: 1. Reply to Wlug Digest, rant (Keith Wright) ---------------------------------------------------------------------- Message: 1 Date: Wed, 2 Dec 2009 14:02:58 -0500 From: Keith Wright <kwright(a)keithdiane.us> Subject: [Wlug] Reply to Wlug Digest, rant To: wlug(a)mail.wlug.org Message-ID: <200912021902.nB2J2w1H006533(a)fcs13.keithdiane.us> > From: kpoisant(a)gmail.com > > Well you can havem when ever they are vga and both work Very generous, I'm sure. I don't want them right now, but had the message been addressed to the person who did, instead of the whole list, ... Maybe the person who asked for a monitor can keep us updated. > Sent from my iPhone There are three possibilities: (1) The iPhone puts that message there, you can't change it. Tell the marketing department it isn't working; I count that as a reason to flee. (2) You think we care. Maybe you can give a talk on Linux-iPhone interoperability. Otherwise no. (3) Most likely, you don't know how, or can't be bothered, to change the default to something useful like your name and phone number or something short like $(cat /dev/null). Which brings me to the point of the rant: > On Dec 2, 2009, at 12:00 PM, wlug-request(a)mail.wlug.org wrote: > > > > When replying, please edit your Subject line so it is more > > specific than "Re: Contents of Wlug digest..." and while you are at it, why not trim off the contents from the body, keeping only what is relevant to the reply. In the case of this rant, the only part relevant is the impressive stack of appended noise. > >> _______________________________________________ > >> Wlug mailing list > >> Wlug(a)mail.wlug.org > >> http://mail.wlug.org/mailman/listinfo/wlug > >> > > -- > > David P. Connell > > davec99(a)charter.net > > M: 508-450-7902 > > > > -------------- next part -------------- > > A non-text attachment was scrubbed... > > Name: davec99.vcf > > Type: text/x-vcard > > Size: 125 bytes > > Desc: not available > > Url : http://mail.wlug.org/pipermail/wlug/attachments/20091201/d3b0a16e/attachmen… > > > > ------------------------------ > > > > _______________________________________________ > > Wlug mailing list > > Wlug(a)mail.wlug.org > > http://mail.wlug.org/mailman/listinfo/wlug > > > > > > End of Wlug Digest, Vol 74, Issue 2 > > *********************************** > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug I feel like an idiot, talking to a mailing list. -- Keith ------------------------------ _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug End of Wlug Digest, Vol 74, Issue 4 ***********************************

1 0

Re: [Wlug] Wlug Digest, Vol 74, Issue 2
by kpoisant＠gmail.com 02 Dec '09

02 Dec '09

Well you can havem when ever they are vga and both work Sent from my iPhone On Dec 2, 2009, at 12:00 PM, wlug-request(a)mail.wlug.org wrote: > Send Wlug mailing list submissions to > wlug(a)mail.wlug.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://mail.wlug.org/mailman/listinfo/wlug > or, via email, send a message with subject or body 'help' to > wlug-request(a)mail.wlug.org > > You can reach the person managing the list at > wlug-owner(a)mail.wlug.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Wlug digest..." > > > Today's Topics: > > 1. Re: Wlug Digest, Vol 74, Issue 1 (kevin poisant) > 2. Re: Looking for monitor (John Stoffel) > 3. Re: Looking for monitor (Dick Goodman) > 4. Re: Looking for monitor (Gregory Boyce) > 5. Re: Looking for monitor (John Stoffel) > 6. Re: Looking for monitor (David P. Connell) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 1 Dec 2009 12:04:57 -0500 > From: kevin poisant <kpoisant(a)gmail.com> > Subject: Re: [Wlug] Wlug Digest, Vol 74, Issue 1 > To: wlug(a)mail.wlug.org > Message-ID: > <71fc31440912010904t2f3d30e0r3e915a5bc0e1d1e7(a)mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > I have two crts free if picked up sturbridge ma > > On Dec 1, 2009 12:00 PM, <wlug-request(a)mail.wlug.org> wrote: > > Send Wlug mailing list submissions to > wlug(a)mail.wlug.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://mail.wlug.org/mailman/listinfo/wlug > or, via email, send a message with subject or body 'help' to > wlug-request(a)mail.wlug.org > > You can reach the person managing the list at > wlug-owner(a)mail.wlug.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Wlug digest..." > > > Today's Topics: > > 1. Looking for monitor (John Stoffel) > 2. Re: Looking for monitor (Jason Couture) > 3. Re: Looking for monitor (Jared Greenwald) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 1 Dec 2009 11:25:47 -0500 > From: "John Stoffel" <john(a)stoffel.org> > Subject: [Wlug] Looking for monitor > To: wlug(a)mail.wlug.org > Message-ID: <19221.17291.830920.813024(a)stoffel.org> > Content-Type: text/plain; charset=us-ascii > > > Hi all, > > I'm looking for a cheap (free if possible) old monitor someone wants > to get rid of. Something in the 17-21" range, but probably not much > bigger since they get too heavy. > > Thanks, > John > > > ------------------------------ > > Message: 2 > Date: Tue, 1 Dec 2009 11:29:53 -0500 > From: Jason Couture <plaguethenet(a)gmail.com> > Subject: Re: [Wlug] Looking for monitor > To: Worcester Linux Users Group <wlug(a)mail.wlug.org> > Message-ID: > <e290abaf0912010829r7de7ed3fmec105ca26b42dbeb(a)mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > I doubt this is up your alley, But i have a 17" NEC AccuSync (LCD) for > sale for $100 + tax. > > On Tue, Dec 1, 2009 at 11:25 AM, John Stoffel <john(a)stoffel.org> > wrote: >> >> Hi all, >> >> I'm looking for a cheap (free if possible) old monitor someone wants >> to get rid of. ?Something in the 17-21" range, but probably not much >> bigger since they get too heavy. >> >> Thanks, >> John >> _______________________________________________ >> Wlug mailing list >> Wlug(a)mail.wlug.org >> http://mail.wlug.org/mailman/listinfo/wlug >> > > > > ------------------------------ > > Message: 3 > Date: Tue, 1 Dec 2009 11:30:55 -0500 > From: Jared Greenwald <greenwaldjared(a)gmail.com> > Subject: Re: [Wlug] Looking for monitor > To: Worcester Linux Users Group <wlug(a)mail.wlug.org> > Message-ID: > <2759cf860912010830l3e086a1eo2c500379bc788652(a)mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > I have a 17" CRT that you can have if you come pick it up. > > On Tue, Dec 1, 2009 at 11:25 AM, John Stoffel <john(a)stoffel.org> > wrote: >> >> Hi all, >> >> I'm looking for a cheap (free if possible) old monitor someone wants >> to get rid of. ?Something in the 17-21" range, but probably not much >> bigger since they get too heavy. >> >> Thanks, >> John >> _______________________________________________ >> Wlug mailing list >> Wlug(a)mail.wlug.org >> http://mail.wlug.org/mailman/listinfo/wlug >> > > > > ------------------------------ > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > > > End of Wlug Digest, Vol 74, Issue 1 > *********************************** >

2 1

Re: [Wlug] Wlug Digest, Vol 74, Issue 2
by dkelly＠wpi.edu 02 Dec '09

02 Dec '09

I have a 19" or so CRT you can have. It has VGA. If you can come pick it up, you can have it. I live near WPI. Devin On Wed, Dec 2, 2009 at 12:00 PM, wlug-request(a)mail.wlug.org < wlug-request(a)mail.wlug.org> wrote: > Send Wlug mailing list submissions to > wlug(a)mail.wlug.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://mail.wlug.org/mailman/listinfo/wlug > or, via email, send a message with subject or body 'help' to > wlug-request(a)mail.wlug.org > > You can reach the person managing the list at > wlug-owner(a)mail.wlug.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Wlug digest..." > > > Today's Topics: > > 1. Re: Wlug Digest, Vol 74, Issue 1 (kevin poisant) > 2. Re: Looking for monitor (John Stoffel) > 3. Re: Looking for monitor (Dick Goodman) > 4. Re: Looking for monitor (Gregory Boyce) > 5. Re: Looking for monitor (John Stoffel) > 6. Re: Looking for monitor (David P. Connell) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 1 Dec 2009 12:04:57 -0500 > From: kevin poisant <kpoisant(a)gmail.com> > Subject: Re: [Wlug] Wlug Digest, Vol 74, Issue 1 > To: wlug(a)mail.wlug.org > Message-ID: > <71fc31440912010904t2f3d30e0r3e915a5bc0e1d1e7(a)mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > I have two crts free if picked up sturbridge ma > > On Dec 1, 2009 12:00 PM, <wlug-request(a)mail.wlug.org> wrote: > > Send Wlug mailing list submissions to > wlug(a)mail.wlug.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://mail.wlug.org/mailman/listinfo/wlug > or, via email, send a message with subject or body 'help' to > wlug-request(a)mail.wlug.org > > You can reach the person managing the list at > wlug-owner(a)mail.wlug.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Wlug digest..." > > > Today's Topics: > > 1. Looking for monitor (John Stoffel) > 2. Re: Looking for monitor (Jason Couture) > 3. Re: Looking for monitor (Jared Greenwald) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 1 Dec 2009 11:25:47 -0500 > From: "John Stoffel" <john(a)stoffel.org> > Subject: [Wlug] Looking for monitor > To: wlug(a)mail.wlug.org > Message-ID: <19221.17291.830920.813024(a)stoffel.org> > Content-Type: text/plain; charset=us-ascii > > > Hi all, > > I'm looking for a cheap (free if possible) old monitor someone wants > to get rid of. Something in the 17-21" range, but probably not much > bigger since they get too heavy. > > Thanks, > John > > > ------------------------------ > > Message: 2 > Date: Tue, 1 Dec 2009 11:29:53 -0500 > From: Jason Couture <plaguethenet(a)gmail.com> > Subject: Re: [Wlug] Looking for monitor > To: Worcester Linux Users Group <wlug(a)mail.wlug.org> > Message-ID: > <e290abaf0912010829r7de7ed3fmec105ca26b42dbeb(a)mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > I doubt this is up your alley, But i have a 17" NEC AccuSync (LCD) for > sale for $100 + tax. > > On Tue, Dec 1, 2009 at 11:25 AM, John Stoffel <john(a)stoffel.org> wrote: > > > > Hi all, > > > > I'm looking for a cheap (free if possible) old monitor someone wants > > to get rid of. ?Something in the 17-21" range, but probably not much > > bigger since they get too heavy. > > > > Thanks, > > John > > _______________________________________________ > > Wlug mailing list > > Wlug(a)mail.wlug.org > > http://mail.wlug.org/mailman/listinfo/wlug > > > > > > ------------------------------ > > Message: 3 > Date: Tue, 1 Dec 2009 11:30:55 -0500 > From: Jared Greenwald <greenwaldjared(a)gmail.com> > Subject: Re: [Wlug] Looking for monitor > To: Worcester Linux Users Group <wlug(a)mail.wlug.org> > Message-ID: > <2759cf860912010830l3e086a1eo2c500379bc788652(a)mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > I have a 17" CRT that you can have if you come pick it up. > > On Tue, Dec 1, 2009 at 11:25 AM, John Stoffel <john(a)stoffel.org> wrote: > > > > Hi all, > > > > I'm looking for a cheap (free if possible) old monitor someone wants > > to get rid of. ?Something in the 17-21" range, but probably not much > > bigger since they get too heavy. > > > > Thanks, > > John > > _______________________________________________ > > Wlug mailing list > > Wlug(a)mail.wlug.org > > http://mail.wlug.org/mailman/listinfo/wlug > > > > > > ------------------------------ > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > > > End of Wlug Digest, Vol 74, Issue 1 > *********************************** > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > http://mail.wlug.org/pipermail/wlug/attachments/20091201/35148e08/attachmen… > > ------------------------------ > > Message: 2 > Date: Tue, 1 Dec 2009 12:43:23 -0500 > From: "John Stoffel" <john(a)stoffel.org> > Subject: Re: [Wlug] Looking for monitor > To: Worcester Linux Users Group <wlug(a)mail.wlug.org> > Message-ID: <19221.21947.171896.756733(a)stoffel.org> > Content-Type: text/plain; charset=us-ascii > > >>>>> "John" == John Stoffel <john(a)stoffel.org> writes: > > John> I'm looking for a cheap (free if possible) old monitor someone > John> wants to get rid of. Something in the 17-21" range, but > John> probably not much bigger since they get too heavy. > > Thanks for the replies. I forgot to mention my location, which is > Boylston/Marlboro axis of I290. > > Sturbridge is tempting though. > > Also, probably (not sure, haven't seen the computer in question) need > HD15 VGA connectors, not the newer DVI stuff. > > Thanks! > John > > > ------------------------------ > > Message: 3 > Date: Tue, 1 Dec 2009 16:22:55 -0500 > From: Dick Goodman <wlug(a)goodman1.net> > Subject: Re: [Wlug] Looking for monitor > To: Worcester Linux Users Group <wlug(a)mail.wlug.org> > Message-ID: <a06240800c73b393315fb(a)[192.168.1.62]> > Content-Type: text/plain; charset="us-ascii" ; format="flowed" > > I've got a bunch of 17" monitors - one for free not a problem > In Worcester, walking distance from WPI (although probably not if > carrying a monitor) > > Dick > > >Hi all, > > > >I'm looking for a cheap (free if possible) old monitor someone wants > >to get rid of. Something in the 17-21" range, but probably not much > >bigger since they get too heavy. > > > >Thanks, > >John > > > ------------------------------ > > Message: 4 > Date: Tue, 1 Dec 2009 16:25:51 -0500 > From: Gregory Boyce <gregory.boyce(a)gmail.com> > Subject: Re: [Wlug] Looking for monitor > To: Worcester Linux Users Group <wlug(a)mail.wlug.org> > Cc: Worcester Linux Users Group <wlug(a)mail.wlug.org> > Message-ID: <235B54E8-BCF2-4834-BDF1-60828A8AF8C0(a)gmail.com> > Content-Type: text/plain; charset=us-ascii; format=flowed; > delsp=yes > > On Dec 1, 2009, at 12:43 PM, "John Stoffel" <john(a)stoffel.org> wrote: > > >>>>>> "John" == John Stoffel <john(a)stoffel.org> writes: > > > > John> I'm looking for a cheap (free if possible) old monitor someone > > John> wants to get rid of. Something in the 17-21" range, but > > John> probably not much bigger since they get too heavy. > > > > Thanks for the replies. I forgot to mention my location, which is > > Boylston/Marlboro axis of I290. > > Sturbridge is tempting though. > > > > Also, probably (not sure, haven't seen the computer in question) need > > HD15 VGA connectors, not the newer DVI stuff. > > I've got a nice Dell 21" CRT sitting in my basement in Ashland. It > has VGA connectors on it. > > It's free for a good home. > > > ------------------------------ > > Message: 5 > Date: Tue, 1 Dec 2009 17:00:05 -0500 > From: "John Stoffel" <john(a)stoffel.org> > Subject: Re: [Wlug] Looking for monitor > To: Worcester Linux Users Group <wlug(a)mail.wlug.org> > Message-ID: <19221.37349.792746.813403(a)stoffel.org> > Content-Type: text/plain; charset=us-ascii > > >>>>> "Gregory" == Gregory Boyce <gregory.boyce(a)gmail.com> writes: > > Gregory> On Dec 1, 2009, at 12:43 PM, "John Stoffel" <john(a)stoffel.org> > wrote: > >>>>>>> "John" == John Stoffel <john(a)stoffel.org> writes: > >> > John> I'm looking for a cheap (free if possible) old monitor someone > John> wants to get rid of. Something in the 17-21" range, but > John> probably not much bigger since they get too heavy. > >> > >> Thanks for the replies. I forgot to mention my location, which is > >> Boylston/Marlboro axis of I290. > >> Sturbridge is tempting though. > >> > >> Also, probably (not sure, haven't seen the computer in question) need > >> HD15 VGA connectors, not the newer DVI stuff. > > Gregory> I've got a nice Dell 21" CRT sitting in my basement in Ashland. > It > Gregory> has VGA connectors on it. > > Gregory> It's free for a good home. > > This would be great! The people I'm getting this for are in Upton, I > think. Let me talk with my father-in-law on this. Care to give me > contact details I can forward on? > > Thanks, > John > > > ------------------------------ > > Message: 6 > Date: Tue, 01 Dec 2009 22:03:42 -0500 > From: "David P. Connell" <davec99(a)charter.net> > Subject: Re: [Wlug] Looking for monitor > To: Worcester Linux Users Group <wlug(a)mail.wlug.org> > Message-ID: <4B15D90E.6020601(a)charter.net> > Content-Type: text/plain; charset="iso-8859-1" > > I'm sure you're all set by now, but I also have a 17" CRT in Worcester - > free, of course. > DaveC > > John Stoffel wrote: > > Hi all, > > > > I'm looking for a cheap (free if possible) old monitor someone wants > > to get rid of. Something in the 17-21" range, but probably not much > > bigger since they get too heavy. > > > > Thanks, > > John > > _______________________________________________ > > Wlug mailing list > > Wlug(a)mail.wlug.org > > http://mail.wlug.org/mailman/listinfo/wlug > > > > > > -- > David P. Connell > davec99(a)charter.net > M: 508-450-7902 > > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: davec99.vcf > Type: text/x-vcard > Size: 125 bytes > Desc: not available > Url : > http://mail.wlug.org/pipermail/wlug/attachments/20091201/d3b0a16e/attachmen… > > ------------------------------ > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > > > End of Wlug Digest, Vol 74, Issue 2 > *********************************** > -- http://users.wpi.edu/~dkelly/

1 0