- WLUG - wlug.mailman3.com

Re: [Wlug] Setting up cable modem (Charter)
by Thomas Carey 30 Jun '01

30 Jun '01

2 1

Re: [Wlug] Setting up cable modem (Charter)
by Peter Gutowski 30 Jun '01

30 Jun '01

On 6/30/01 3:34 PM, Thomas Carey <tcarey70(a)hotmail.com> wrote: > >I know I have seen several posts in the past, but I need a little >information on setting up my cable modem through Charter. > >A little background information; > >Red Hat 7.1 installed. > >I have two nics installed, one static (192.168.1.1 internal scheme), >one DHCP (connected to the cable modem, the cable modem when installed >by Charter was assigned 192.168.100.1). > >On boot up eth1 fails (eth1 is fine on boot up). I know I am probably >missing some configuration somewhere. I know both nic's are working >fine. After the first failed boot up (on eth1) I switched the cards, >and the static nic was fine. I'm assuming you've made a minor typing mistake in the first sentence of the previous paragraph (otherwise very confusing) I'm assuming also that you're saying that the internal card boots OK and the card hooked to the cable modem is failing: - be sure the driver module for the cable modem eth card is loaded (e.g 'insmod 3c90x' or whatever for your card ) - be sure the 'pump' package in installed > >Any ideas? If any of the above doesn't help, please give more info re: type of cards, excerpts of log files showing error messages, etc. config files, (e.g./etc/sysconfig/network-scripts/ifcfg-eth1) > >TIA > >Tom Carey >Get your FREE download of MSN Explorer at http://explorer.msn.com ><http://explorer.msn.com> >_______________________________________________ Wlug mailing list >Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

rpm problem
by Marc Hughes 30 Jun '01

30 Jun '01

Having a problem with RPM... # rpm -qa |grep mozilla mozilla-0.9.1-ximian.4 nautilus-mozilla-1.0.3-ximian.3 mozilla-0.9.1-ximian.4 # rpm -e mozilla-0.9.1 error: "mozilla-0.9.1" specifies multiple packages # rpm -e mozilla-0.9.1-ximian.4 error: "mozilla-0.9.1-ximian.4" specifies multiple packages Any ideas on how I can actually remove those two identical packages that somehow got installed? (mozilla does not in fact work correctly) Thanks, -Marc

3 2

Familiar Linux help...
by Wesley Allen 29 Jun '01

29 Jun '01

Hello all. I am FINALLY getting an iPaq and want to flash the ROM to install familar linux (or QT embedded). I've been looking over the howtos but I think I would feel better to have someone who's done this sitting over my shoulder so I don't make a $600 paperweight. Also, can someone tell me what apps are in ipkg format for familiar, I've been having trouble finding them? What about the possibility of switching between QT embedded and X for other useful apps (like, game boy emulators, for instance, or even the Atari Lynx...). Can anyone help me with this? Wes

1 0

RE: [Wlug] HP LH Pro...
by Keller, Tim 29 Jun '01

29 Jun '01

Figured it out... Turned out that I could change the boot order on the machine, its working fine now. Tim. -----Original Message----- From: Keller, Tim [mailto:Tim.Keller@stratus.com] Sent: Friday, June 29, 2001 8:19 AM To: 'wlug(a)wlug.org' Subject: [Wlug] HP LH Pro... Probably a quick one, but neither google or I have sorted it out yet... I have a HP LH PRO with a AMI Megaraid controller in it. Connected to the controller are 2 4gig disks I've got configured to be mirrored using the hardware raid. (when doing the install you only see 1 4 gig disk) Now Mandrake 7.2 installs fine, and when using a boot floppy can see the controller etc... however when booting off of the controller, lilo comes up, it finds the kernel image and then stops at "unpacking the kernel..." I don't get any errors, it just hangs. I hooked up a regular scsi disk to one of the other Adaptec controllers but by the nature of the way the machine is layered out sda is the raid controller so the boot sector ends up on it anyway. My kernel works properly because it can access all the filesystems that reside on those disks, I just can't boot off of them. It feels like an issue with lilo... If anybody has experience with this I'd like to know what the solution would be. Thanks, Tim _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

HP LH Pro...
by Keller, Tim 29 Jun '01

29 Jun '01

Probably a quick one, but neither google or I have sorted it out yet... I have a HP LH PRO with a AMI Megaraid controller in it. Connected to the controller are 2 4gig disks I've got configured to be mirrored using the hardware raid. (when doing the install you only see 1 4 gig disk) Now Mandrake 7.2 installs fine, and when using a boot floppy can see the controller etc... however when booting off of the controller, lilo comes up, it finds the kernel image and then stops at "unpacking the kernel..." I don't get any errors, it just hangs. I hooked up a regular scsi disk to one of the other Adaptec controllers but by the nature of the way the machine is layered out sda is the raid controller so the boot sector ends up on it anyway. My kernel works properly because it can access all the filesystems that reside on those disks, I just can't boot off of them. It feels like an issue with lilo... If anybody has experience with this I'd like to know what the solution would be. Thanks, Tim

1 0

Multiple IPs on one NIC
by Bill Mills-Curran 28 Jun '01

28 Jun '01

I know it's possible to assign multiple IPs (at least for listening) to a single ethernet device. I _know_ I should read first and ask questions second, but I'm just _so_ lazy, and there hasn't been much traffic anyway. TIA, Bill

2 2

RE: Battlebots
by Benjamin Zack 26 Jun '01

26 Jun '01

You can count me in. -Ben

1 0

Connecting USB device
by Michael Long 26 Jun '01

26 Jun '01

I am running SuSE 7.0 and would like to use the USB version of SanDisk ImageMate for transfering pictures from my digital camera. When I try to mount the device I get the following: mount usbdevfs mount: usbdevfs already mounted or /proc/bus/usb busy mount: according to mtab, usbdevfs is already mounted on /proc/bus/usb I have tried to RTFM and found quite a bit of info but do not know how to pull it all together in such a way to mount my drive and get the pictures off of the CompactCard. Any hints on how to get this thing working would be a great help. Thanks, Mike

2 3

Re: [Wlug] Battlebots / Mind Rover...
by Wesley Allen 26 Jun '01

26 Jun '01

Hmmm... Virtual mayhem. No blood. Manical machines? Sparks a-flying? Metal crunching? Death Match???? Count Me IN!!!!!!!!!!!!! Can I name mine HAL? BTW: I'm (finally) moving out to Westborough area. The Cape Ann LUG is pretty in active and I can't wait to get more involved in the Discussions at WLUG, you guys seem to have a good time! Wes ---------- Original Message ---------------------------------- From: "Keller, Tim" <Tim.Keller(a)stratus.com> Reply-To: wlug(a)mail.wlug.org Date: Thu, 21 Jun 2001 15:31:22 -0400 >This is very off topic, but knowing that were all nerdy types I figure I'd >get some interesting feed back. > >Loki Games just released a Linux port of a game called "Mind Rover" Marc >Hughes and myself have been having a lot of fun recently having our robots >beat the crap out of each other. > >[quick mind rover synopsis] >you pick a chassis (hovercraft, wheeled, treaded), you put your weapons and >sensors all over the chassis, you then design the logic that drives the >whole contraption. Along with the robots there are different scenarios, >such as capture the flag and maze levels. > >I was wondering how many people would be interested in starting a "Mind >Rover" competition inside wlug. If it were more than 10 people, we could >get a bulk rate on Mind Rover. > >As for the actual mechanics of running the competitions, I'd like some >input. > >Thanks for having an open ear!!! > >Tim. >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug >

1 0

new machine questions
by mike 25 Jun '01

25 Jun '01

Howdy all - I'd like to replace my computer (P100) with something newer and significantly faster (but nothing bleeding edge; I'm looking for good-value speed). I'm thinking up to 1GHz (P3?). I want 16/24b color and since I've been out of it awhile I don't know anything about card makers anymore (like what's good, compatible, etc.) or if the std these days is on-board video. I've used Linux for years and want something that will allow me to get/use a scanner (first time; SCSI or USB? recommendations?) and CD-RW (recommendations). I have magazines and documents I want to scan and store on tape or CD. But what's most important is that I be able to generate some sort of index so that I can search the scanned documents (like keywords or text). What do I need for that? Can someone recommend hardware/software for this purpose? I haven't been a 'PC expert' for many years (and don't want to become one again :->) and am therefore no longer up on the latest PC technologies by way of mb, bus speeds, what's a value and what's a waste of money. Can anyone recommend hardware and someone local that sells build to order machines (no brand-names or CompUSA types)? Anything from Worcester to Shrewsbury to Marlboro to Acton to Natick, etc. Does anyone buy machines by mail and have anyone they'd recommend (or who to definitely avoid)? Thanks... Mike mhardy_mail(a)yahoo.com __________________________________________________ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/

2 1

Help
by Breaux_Steve＠emc.com 22 Jun '01

22 Jun '01

I work at EMC and I installed REDHAT7.0 on a Dell GX150 and I can't get Applix office to install on it? what am I to do?

2 1

Someone's hammering....
by Peter Gutowski 22 Jun '01

22 Jun '01

I recently installed logcheck on my RH 7.0 systems and have been comforted and possibly entertained by how well it works. However this morning I started getting lengthy messages indicating what appears to be somebody trying to break in via a buffer overrun. I get this... Security Violations =-=-=-=-=-=-=-=-=-= Jun 22 05:17:53 host SERVER[18075]: Dispatch_input: bad request line '..... followed by a lot of binary bytes ending in "/bin/sh" I've ad a couple "spurts" of this already today on two different systems; lasting about 2 minutes and then dissappearing. I'm guessing that whoever is trying this is [so far] being kept out, but I guess I'd like to know what is being hammered on as "SERVER" doesn't provide much help. Any ideas? -- Peter Gutowski <peter(a)linuxchamps.com> // tel.: (413) 587-3957 "When in company, put not your hands to any part of the body not usually discovered." --George Washington, _Rules for Civility and Decent Behavior_

2 1

Battlebots / Mind Rover...
by Keller, Tim 21 Jun '01

21 Jun '01

This is very off topic, but knowing that were all nerdy types I figure I'd get some interesting feed back. Loki Games just released a Linux port of a game called "Mind Rover" Marc Hughes and myself have been having a lot of fun recently having our robots beat the crap out of each other. [quick mind rover synopsis] you pick a chassis (hovercraft, wheeled, treaded), you put your weapons and sensors all over the chassis, you then design the logic that drives the whole contraption. Along with the robots there are different scenarios, such as capture the flag and maze levels. I was wondering how many people would be interested in starting a "Mind Rover" competition inside wlug. If it were more than 10 people, we could get a bulk rate on Mind Rover. As for the actual mechanics of running the competitions, I'd like some input. Thanks for having an open ear!!! Tim.

2 1

backup programs
by Brad Noyes 21 Jun '01

21 Jun '01

Hi all, I have noticed the lack of sufficient backup programs for linux. A friend an i have decided to write our own. We have come up with a good list of goals we want to hit. Before we started seriously working on the design, i wanted to ask the group of features they would like to see in a backup systems. Thanks, --Brad

5 6

Loki games for $9.99 or less
by Brian J. Conway 17 Jun '01

17 Jun '01

I came across this in a MandrakeForum.com article today. I figured that if anyone was interested in Quake III, Soldier of Fortune, or most of the other Loki games for $9.99 (or $4.99), then it's for you: http://www.ebgames.com/ebx/categories/products/deptpage.asp?web_dept=PC+Gam… -b

1 0

GNU utils on Solaris 8
by Brian J. Conway 15 Jun '01

15 Jun '01

Greetings. I'm once again picking up a project that I left off on now that Sun's site has updated the downloadble ISOs for Solaris 8 Intel to the 04/01 version. In the past I've gotten a decently customized install and had GCC and some other essentials loaded, but I can never seem to hunt down all the GNU utilities that I need. The one that comes to mind off the top of my head is 'ar', which is part of binutils, and I can't compile binutils as it needs 'ar'. I've scoured www.sunfreeware.com to no avail (though there is some great stuff on there that I always snag), nor is there a version on my system already. Any ideas? Brian J. Conway dogbert(a)clue4all.net Geek for hire: http://clue4all.net/resume Power Mac G4 Cube. Some of us are getting laid tonight. (http://www.pvponline.com/archive.php3?archive=20010509)

2 2

vim errors
by Brad Noyes 14 Jun '01

14 Jun '01

Hi all, I'm having troubles with using vim over a telnet session. When i telnet into my machine and start up vim it sits there for while, until i hit ctl-c, then i get this error Error detected while processing /usr/local/share/vim/vimrc Interrupted Error detected while processing /net/fire/home/bnoyes/.vimrc: regular VI works fine. vim works if i ssh into the host. vim also works fine if i telnet into the machine from windows (using putty). but no luck if i telnet from a linux machines. (btw. The host is unixware, that's a problem in itself). Any ideas? Thanks, --Brad

2 3

Fwd: FREE Open Source Database Seminar in Bostson, MA
by Andy Stewart 13 Jun '01

13 Jun '01

---------- Forwarded Message ---------- Subject: FREE Open Source Database Seminar in Bostson, MA Date: Tue, 12 Jun 2001 15:00:21 -0400 From: "Eric Hause" <info(a)greatbridge.com> To: <andystewart(a)mediaone.net> Dear Andy Stewart: Great Bridge invites you and the members of Worcester Linux Users Group to attend our FREE open source database seminar in Boston, MA: +++++++++++++++++++++++++++++ "It's About Time...And Money: Introduction to Open Source Database Technologies for the Enterprise" Wednesday, June 27, 2001 The Four Seasons Boston Boston, MA +++++++++++++++++++++++++++++ Register online at http://www.greatbridge.com/gb?bos In today's economy, successful e-business requires high-performance database solutions that fit tightening IT budgets. Great Bridge delivers PostgreSQL for Linux and Solaris, an open source object-relational database that won the 2000 Linux Journal Editors' Choice award for best relational database system. By attending our free introductory seminar, you will learn: * How open source technologies can be deployed to create a cost-effective, high-performance platform for e-business. * How PostgreSQL can dramatically improve project ROI by lowering your database software investment. * How PostgreSQL's enterprise-class features compare to other leading databases, such as Oracle, IBM DB2, Microsoft SQL Server, Informix and more. * How Great Bridge services and solutions can help you quickly become productive with PostgreSQL and shorten development cycles. Please plan to join us for this free half-day seminar appropriate for IT managers, programmers, developers, and database professionals. To learn more or register, visit us online at http://www.greatbridge.com/gb?bos Regards, Eric Hause Great Bridge LLC PS: Please feel free to circulate this invitation to the members of Worcester Linux Users Group and visit us online at http://www.greatbridge.com/gb?bos to register today. __________________________________________________________________ This is a one-time notice only and will not be repeated. If you would like to be removed from our mailing list, please send an email with to remove(a)greatbridge.com. ------------------------------------------------------- -- Andy Stewart Founder Worcester Linux Users' Group Worcester, MA, USA http://www.wlug.org

1 0

Reminder: WLUG Meeting 14-june-2001
by Andy Stewart 11 Jun '01

11 Jun '01

Hi everybody, This is just a reminder of the upcoming WLUG meeting, to be held on Thursday, June 14th at 7:00 PM in Kinnicutt Hall at WPI (aka the usual place). At this meeting, WLUG member Tim Keller will be giving a talk on Logical Volume Management (LVM). More details about this talk can be found on the WLUG website. Here are some websites which I've found that are related to Linux and/or LVM: http://www.sistina.com/lvm http://www.sistina.com/lvm/doc/LVM-HOWTO http://ibgwww.Colorado.EDU/~lessem/psyc5112/usail/peripherals/disks/logical/ After the meeting, we'll adjourn to the Boynton Restaurant and all are welcome to join us. See ya later, Andy -- Andy Stewart Founder Worcester Linux Users' Group Worcester, MA, USA http://www.wlug.org

1 0

For sale: 19" sun monitor, 175 USD
by Keller, Tim 07 Jun '01

07 Jun '01

Hey Guys, Here's the skinny on it... Manufacturer: Sun Model: 365-1324 Max Resolution: 1280x1024 Sync Type: Composite H Freq/ V Freq: 88.1khz / 76hz Tube Manufacturer: Sony (Trinitron tube) Tube Size: 20" (19" viewable) Connector: 13W3 (however, they do make a 13W3 to 15pin vga adapter that works great) This is one of those sun monitors that has the little credit card remote in the front (which is still in there). The monitor is in mint condition and works fine. I'm asking 175 for it. Let me know if you want it. Thanks, Tim.

1 0

ipaq
by Brad Noyes 07 Jun '01

07 Jun '01

Hi all, I recently bought an ipaq. I know there are are a few members of the wlug that have and ipaq with linux running. I have done some looking about on the net and i have found a hand full of options or a linux distro to put on the ipaq. I am curious to hear what the group's experience are with linux and the ipaq, and if you have any suggestions/warnings. Thanks --Brad

3 2

dual PII/PIII motherboard of questionable origin up for grabs
by Brian J. Conway 06 Jun '01

06 Jun '01

The WPI Linux Association received a donation of a SuperMicro SUPER P6DBE dual PII/PIII 440BX motherboard (http://www.supermicro.com/PRODUCT/MotherBoards/440BX/p6dbe.htm) The original owner upgraded because it was flaky and thought the parallel port was bad, but upon buying a new motherboard found that it was his fubared sound card causing flakiness, so I'm under the assumption that this motherboard should be good or at least workable, but of course there are NO GUARANTEES. As we currently have no use for it and I'd hate to see it go to waste, get back to me if you'd like it, but please only do so if you'll put it to good use, I'd hate to see something like this go to waste. I'll bring it to the next WLUG meeting to hand off. Brian J. Conway dogbert(a)clue4all.net Geek for hire: http://clue4all.net/resume Power Mac G4 Cube. Some of us are getting laid tonight. (http://www.pvponline.com/archive.php3?archive=20010509) P.S. I'm also told the screen at POST looks a little garbled, but that's due to the latest BIOS update and performance should be unaffected.

3 3

routing table question
by Bill Mills-Curran 06 Jun '01

06 Jun '01

My routing table definitely looks wrong to me: > route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 millie.mills.cu 255.255.255.0 UG 0 0 0 eth0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 127.0.0.0 * 255.0.0.0 U 0 0 0 lo default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 And, "route" hangs for a while before printing the last line. My network response is fine. Comments? TIA, Bill

3 4

Handspring & Linux
by William Smith 05 Jun '01

05 Jun '01

All, I recently "upgraded" from a Palm IIIx to a Handspring Visor Deluxe (screen on the IIIx went South. 8( ). As you might be aware, the Handspring Visor comes with a USB cradle. Has anyone had any success in getting a Linux box to sync-up with a Visor through the USB port? Any ideas are welcome. Best regards, Bill Smith Fall River, MA

3 3