- WLUG - wlug.mailman3.com

freeswan
by Wes Allen April 24, 2003

April 24, 2003

Is anyone out there using freeswan? I'm thinking of repeating my wireless network over to my office after my move and I'm thinking of setting up freeswan to encrypt the traffic more tightly on the network when I do. The howto's I've found have been on setting up a vpn between networks, is it possible to set up freeswan to encrypt traffic on a single lan (until sdmca laws make it technically illegal to do so.....). Wes -- ------ This message may be signed using GPG, for my public key please send me a message with "Key Request" in the subject line.

2 2

REMINDER: WLUG Meeting Wed. April 16, 7:00 PM
by Andy Stewart April 21, 2003

April 21, 2003

HI Everybody, This is a reminder about the upcoming WLUG meeting, which will be held on Wednesday, April 16, 2003 at 7:00 PM in Kinnicutt Hall on the WPI campus. At this meeting, WLUG member Tim Keller will discuss how he used open source software to build a Digital Video Recorder (similar in function to the commercially available TiVO device). After the meeting, there will be a free (as in beer) raffle, and a trip to the Boynton Restaurant for pizza and beer. I look forward to seeing you there! Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

4 4

wireless repeating...
by Wesley Allen April 18, 2003

April 18, 2003

Hi all, We're MOVING! And now I have an opportunity to learn something new... Where we're going, our house is right next to the Church, and the Church offices are 25 yards from the Church and across the street. The Church is made of stone, the office-building is made of brick. Do you think it's possible to somehow put a repeater in the Church that will extend my wireless network the "last mile" so I can have internet access in my study? If so, what would you recommend? I know I'll have to set up a VPN for all my clients so traffic is in the clear on the network, but what hardware would allow me to do this? Wes -- Wesley Allen <wallen(a)charter.net>

1 0

ati mobility m6
by Baris Hasdemir April 16, 2003

April 16, 2003

hi Wlug, I have a laptop gateway 450sx4 with a video card, "ATI Technologies Inc. Mobility M6", as windows displays it. I could not figure which kernel video module I should load. another question is that what will go to the Driver section of XF86Config in xfree4.3.0? slackware uses vesa as default which does not use any hardware acceleration. thanks for any help, baris

2 1

Re:[Wlug] gentoo
by vapier＠netzero.com April 16, 2003

April 16, 2003

> What's people's experience with gentoo? it's a beautiful distro :) > I'm thinking of upgrading one of my boxes to it in the near future. This is a box I really mess around with, so how bleeding edge can I get? well ... lets just say we have had ebuilds for kde, gnome, openoffice, and xfree sometimes weeks before it was officially released ... we also have ebuilds that'll pull packages from cvs ... how much more bleeding edge can you want ? :) > Is it easy to keep some packages at stable releases, and some at unstable, or is it more of an all or nothing thing? at the moment you can run a stable profile which should be pretty stable or you can run unstable (and get all the benefits mentioned above) ... it isnt that easy to maintain a cross of the two at the moment, but portage-2.1.x should take care of that ... > I guess what I want is, a way of trying the newest stuff, but an easy way of going back to stable when I'm horrified with how buggy the newest stuff is. its easy to do that, but after the new emerge you may have to do some trickery to keep portage from re-emerging the stable version ... > Also... for the stable releases... how secure has the distro been as a whole? we have a list of all the GLSA's we've ever released ... we release a GLSA as soon as a bug has been identified and fixed ... we then bump anything security related out of the tree and mark the latest security enhanced version as stable ... for the people who want a system that *only* upgrades security related packages, then we're currently developing a system for that ... again wait till portage-2.1.x to see that ;) -mike ________________________________________________________________ The best thing to hit the internet in years - NetZero HiSpeed! Surf the web up to FIVE TIMES FASTER! Only $14.95/ month -visit www.netzero.com to sign up today!

1 0

gentoo
by Marc Hughes April 16, 2003

April 16, 2003

What's people's experience with gentoo? I'm thinking of upgrading one of my boxes to it in the near future. This is a box I really mess around with, so how bleeding edge can I get? Is it easy to keep some packages at stable releases, and some at unstable, or is it more of an all or nothing thing? I guess what I want is, a way of trying the newest stuff, but an easy way of going back to stable when I'm horrified with how buggy the newest stuff is. Also... for the stable releases... how secure has the distro been as a whole? Comments, horror stories, massive praise? -Marc

2 1

printing problem
by Bill Mills-Curran April 15, 2003

April 15, 2003

I'm trying to configure my LPRng print queue to add a banner page to my print job. OS: Red Hat 8.0 Printer/driver: The printer is a Postscript network printer, using the Lexmark 4039 10 plus driver. I'm able to print just fine. I followed the instructions in /usr/share/doc/redhat-config-printer-0.4.24/README for hijacking a printconf spool. Then I added this to the printcap.local: :bp=/usr/libexec/filters/psbanner:\ However, I can't get the a banner page. What am I doing wrong? TIA, Bill

1 0

computer fair
by Baris Hasdemir April 14, 2003

April 14, 2003

hi, I heard of two computer fairs? or something similar... will take place in malborough this weekend and another one in worcester, again, will take place this weekend. does anybody know anything about them? do such fairs worth seeing? where are they held? a web page if possible? thanks, baris

7 6

WLUG MEETING: April 16th, 2003
by Andy Stewart April 8, 2003

April 8, 2003

Hi everybody, I'd like to tantalize you with an announcement about the next meeting. :-) It will be held on Wednesday, April 16th at 7:00 PM in "the usual place". WLUG member Tim Keller will be discussing how he took Linux and other Open Source software to create his own Digital Video Recorder (DVR) similar to a TiVO. Tim will describe just what a DVR is and how it works. Tim will also discuss software issues, and finally will perform a live demo. I've just updated the website. I'll send out a reminder this weekend. I hope to see many of you in attendance! Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

1 0

Job for Summer
by bryon3245＠netzero.com April 8, 2003

April 8, 2003

This is a open letter to all employers. I am currently a sophomore at Westfield State College. I am majoring in Business with a minor in Computer Information Science. I am looking for a fun and challenging job for the summer that has to do with computers because I enjoy working with them, and I am also quite knowledgeable about the physical hardwarenecessary for them to work and also the software that the parts interact with. I have also been using Linux for over a year now. currently I am running Gentoo on my Laptop. If you have any positions available in the Worcester area or would like any additional information about me, I can be contacted at bryon3245(a)netzero.com -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ .

1 0

Intern Job
by Karl Hiramoto April 7, 2003

April 7, 2003

Any students looking for a summer programming job? http://jobs.accusense.com/programmer-analyist-intern.html Only bad part is you have to work for me ;-) -- ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø Karl Hiramoto <karl(a)hiramoto.org> Work: 978-425-2090 ext 25 Cell: 508-517-4819 Personal web page: http://karl.hiramoto.org/ Freedom: http://www.technojihad.com/ Zoop Productions: http://www.zoop.org/ KTEQ Rapid City: http://www.kteq.org/ AOL IM ID = KarlH420 Yahoo_IM = karl_hiramoto ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø The attacker must vanquish; the defender need only survive.

1 0

Red Hat Linux 9 now officially available
by Charles R. Anderson April 7, 2003

April 7, 2003

Everyone can get it here: ftp://angus.ind.wpi.edu/pub/mirrors/redhat/linux/9 ISO's, FTP installations, individual packages, and docs. Release Notes: Red Hat Linux 9 Release Notes Copyright (c) 2003 Red Hat, Inc. ---------------------------------------------------------------------- Hardware Requirements The following information represents the minimum hardware requirements necessary to successfully install Red Hat Linux 9: CPU: - Minimum: Pentium-class - Recommended for text-mode: 200 MHz Pentium-class or better - Recommended for graphical: 400 MHz Pentium II or better Hard Disk Space (NOTE: Additional space will be required for user data): - Custom Installation (minimum): 475MB - Server (minimum): 850MB - Personal Desktop: 1.7GB - Workstation: 2.1GB - Custom Installation (everything): 5.0GB Memory: - Minimum for text-mode: 64MB - Minimum for graphical: 128MB - Recommended for graphical: 192MB Note that the compatibility/availability of other hardware components (such as video and network cards) may be required for specific installation modes and/or post-installation usage. For more information about hardware compatibility, see the Red Hat Linux Hardware Compatibility List at http://hardware.redhat.com/hcl/ Installation-Related Notes This section outlines those issues that are related to Anaconda (the Red Hat Linux installation program) and installing Red Hat Linux 9 in general. o The Red Hat Linux installation program has the ability to test the integrity of the installation media. It works with the CD, DVD, hard drive ISO, and NFS ISO installation methods. Red Hat recommends that you test all installation media before starting the installation process, and before reporting any installation-related bugs (many of the bugs reported are actually due to improperly-burned CDs). To use this test, type linux mediacheck at the boot: prompt. o While most present-day computers are able to start the installation process by booting directly from the first Red Hat Linux distribution CD, some hardware configurations require the use of a boot diskette. If your hardware requires a boot diskette, you should be aware of the following change. Red Hat Linux 9 uses a different boot diskette layout than previous releases of Red Hat Linux. There is now a single boot diskette image file (bootdisk.img) that is used to boot all systems requiring a boot diskette. If you are performing anything other than an installation from an IDE or USB device, you will be asked to insert a driver diskette created from one of the following image files: - drvnet.img - For network installations - drvblock.img - For SCSI installations - pcmciadd.img - For PCMCIA installations As with previous releases of Red Hat Linux, these image files can be found in the images/ directory on the first installation CD. o Also in the images/ directory is the boot.iso file. This file is an ISO image that can be used to boot the Red Hat Linux installation program. It is a handy way to start network-based installations without having to use multiple diskettes. To use boot.iso, your computer must be able to boot from its CD-ROM drive, and its BIOS settings must be configured to do so. You must then burn boot.iso onto a recordable/rewriteable CD-ROM. o The rescue mode environment (accessed by booting with the "linux rescue" boot-time command) has been enhanced. Numerous requested utilities have been added, and there is now support for activating network interfaces. Commands needed for SCSI tape support are also available. Please test this environment and send us your feedback. If you chose to mount an existing installation in rescue mode and you have man pages installed on that existing installation, the man command will work while in rescue mode. o The Red Hat Linux installation program now detects existing Red Hat products on your system, and will prompt you to select the product you would like to upgrade. You will also have the option of performing a complete re-installation of the system instead of upgrading. Please report any problems you may experience with this new feature. If the contents of your /etc/redhat-release file has been changed from the default, your Red Hat Linux installation may not be found when attempting an upgrade to Red Hat Linux 9. You can relax some of the checks against this file by entering the following at the boot: prompt: linux upgradeany Use the upgradeany option only if your existing Red Hat Linux installation was not detected. o isolinux is now used for booting the Red Hat Linux installation CD. If you have problems booting from the CD, you can write the images/bootdisk.img image to a diskette according to the directions in the Red Hat Linux Installation Guide. o During a graphical installation, you can now press SHIFT-Print Screen and a screenshot of the current installation screen will be taken. These are stored in the following directory: /root/anaconda-screenshots/ The screenshots can be accessed once the newly-installed system is rebooted. o The parted disk partition manipulation program has been upgraded to version 1.6. o Users of Red Hat Linux 6.2 that want to upgrade their system to Red Hat Linux 9 must first have all errata updates applied before starting the upgrade process. The most straightforward way to accomplish this is to use Red Hat Network. A Red Hat Linux 6.2 system that is not completely up-to-date will not upgrade successfully to Red Hat Linux 9. o Text mode installations using a serial terminal work best when the terminal supports UTF-8. Under UNIX and Linux, Kermit supports UTF-8. For Windows, Kermit '95 works well. Non-UTF-8 capable terminals will work as long as only English is used during installation. An enhanced serial display can be used by passing "utf8" as a boot-time option to the installation program. For example: linux console=ttyS0 utf8 General Notes This section describes post-installation issues. o There have been issues observed when upgrading Red Hat Linux 6.<x>, 7.<x>, 8.0, and 9 systems running Ximian GNOME. The issue is caused by version overlap between the official Red Hat Linux RPMs and the Ximian RPMs. This configuration is not supported by Red Hat. You have several choices in resolving this issue: 1) You may remove Ximian GNOME from your Red Hat Linux system prior to upgrading Red Hat Linux. 2) You may upgrade Red Hat Linux, and then immediately reinstall Ximian GNOME. 3) You may upgrade Red Hat Linux, and then immediately remove all remaining Ximian RPMs, and replace them with the corresponding Red Hat Linux RPMs. You must resolve the version overlap using one of the above choices. Failure to do so will result in an unstable GNOME configuration. o There has been some confusion regarding font-related issues under the X Window System in recent versions of Red Hat Linux. At the present time, there are two font subsystems, each with different characteristics: - The original (15+ year old) subsystem is referred to as the "core X font subsystem". Fonts rendered by this subsystem are not anti-aliased, are handled by the X server, and have names like: -misc-fixed-medium-r-normal--10-100-75-75-c-60-iso8859-1 The newer font subsystem is known as "fontconfig", and allows applications direct access to the font files. Fontconfig is often used along with the "Xft" library, which allows applications to render fontconfig fonts to the screen with antialiasing. Fontconfig uses more human-friendly names like: Luxi Sans-10 Over time, fontconfig/Xft will replace the core X font subsystem. At the present time, applications using the Qt 3 or GTK 2 toolkits (which would include KDE and GNOME applications) use the fontconfig and Xft font subsystem; most everything else uses the core X fonts. In the future, Red Hat may support only fontconfig/Xft in place of the XFS font server as the default local font access method. NOTE: Two exceptions to the font subsystem usage outlined above are OpenOffice.org (which uses its own font rendering technology), and Mozilla (which uses fontconfig, but not GTK 2). If you wish to add new fonts to your Red Hat Linux 9 system, you must be aware that the steps necessary depend on which font subsystem is to use the new fonts. For the core X font subsystem, you must: 1. Create the /usr/share/fonts/local/ directory (if it doesn't already exist): mkdir /usr/share/fonts/local/ If you had to create /usr/share/fonts/local/, you must then add it to the X font server (xfs) path: chkfontpath --add /usr/share/fonts/local/ 2. Copy the new font file into /usr/share/fonts/local/ 3. Update the font information by issuing the following command: ttmkfdir -d /usr/share/fonts/local/ -o /usr/share/fonts/local/fonts.scale 4. Reload the xfs font server using the following command: service xfs reload Adding new fonts to the fontconfig font subsystem is more straightforward; the new font file only needs to be copied into the /usr/share/fonts/ directory (individual users can modify their personal font configuration by copying the font file into the ~/.fonts/ directory). After the new font has been copied, use fc-cache to update the font information cache: fc-cache <directory> (Where <directory> would be either the /usr/share/fonts/ or ~/.fonts/ directories.) Individual users may also install fonts graphically, by browsing fonts:/// in Nautilus, and dragging the new font files there. NOTE: If the font filename ends with ".gz", it has been compressed with gzip, and must be decompressed (with the gunzip command) before the fontconfig font subsystem can use the font. o Due to the transition to the new font system based on fontconfig/Xft, GTK+ 1.2 applications are not affected by any changes made via the Font Preferences dialog. For these applications, a font can be configured by adding the following lines to the file ~/.gtkrc.mine: style "user-font" { fontset = "<font-specification>" } widget_class "*" style "user-font" (Where <font-specification> represents a font specification in the style used by traditional X applications, such as "-adobe-helvetica-medium-r-normal--*-120-*-*-*-*-*-*".) o New features in XFree86 include: - Xcursor - New mouse cursor code, allowing color, antialiased, alpha blended (translucency), animated, themeable, multi-size mouse pointers to be used. - ATI Radeon 9000, 9100, FireGL 8700, 8800 3D/2D/Xv support is now available. ATI Radeon 9500 Pro and 9700 Pro, as well as ATI FireGL X1 and Z1 are now supported 2D-only. Support for over 30 additional ATI Rage 128 chipsets have been added to this release, which should cover all existing Rage 128 chipsets now. - Intel i845, i852, i855, and i865 integrated video support (2D/3D/Xvideo), and improved Intel i830 video support. The Intel video driver has been completely restructured and largely rewritten to be much more robust, and support more hardware. Many bugs have been fixed, as well as many workarounds for broken laptop and motherboard BIOSs that limit memory to 1Mb. - New support for NVIDIA GeForce 4, nForce, GeForce 2 Go, and various other NVIDIA hardware. Also, the nv driver has been enhanced to attempt to autodetect unknown NVIDIA chips that aren't officially supported, but can probably be coaxed to work anyway (albeit not officially supported) by treating them similarly to one of the other supported chips in the same family. The nv driver, as in previous releases, remains 2D only. - At the time these release notes were finalized, NVIDIA's binary-only accelerated 3D drivers are not currently compatible with Red Hat Linux 9. NVIDIA is aware of the problem; watch the NVIDIA website for updates regarding this situation. - Updated Savage driver which supports the newest Savage video chipsets, and fixes various bugs. - A brand new driver for the National Semiconductor Geode chipset, nsc, is provided. - Many other video driver updates and improvements have been made. - Many new input drivers including fpit, palmax, ur98 and others have been added. o By default, the Sendmail mail transport agent (MTA) does not accept network connections from any host other than the local computer. If you want to configure Sendmail as a server for other clients, you must edit /etc/mail/sendmail.mc and change the DAEMON_OPTIONS line to also listen on network devices (or comment out this option entirely using the dnl comment delimiter). You must then regenerate /etc/mail/sendmail.cf by running the following command (as root): make -C /etc/mail Note that you must have the sendmail-cf package installed for this to work. o CUPS is now the default print spooler, and redhat-config-printer is the recommended tool for configuring it. It may be launched from the System Settings menu, using the Printing menu entry. LPRng is still provided, and upgrades from previous installations using LPRng will continue to use it. o GNOME Print Manager, a simple graphical print queue management tool, is now included. It may be launched from the System Tools menu, using the Print Manager menu entry. In addition, when a print job is in the queue, an icon will appear in the panel's system notification area. o Red Hat Linux 9 includes the Native POSIX Thread Library (NPTL), a new implementation of POSIX threads for Linux. This library provides performance improvements and increased scalability for i686 or better processors. This thread library is designed to be binary compatible with the old LinuxThreads implementation; however, applications that rely on the places where the LinuxThreads implementation deviates from the POSIX standard will need to be fixed. Notable differences include: - Signal handling has changed from per-thread signal handling to POSIX process signal handling. - getpid() returns the same value in all threads. - Thread handlers registered with pthread_atfork are not run if vfork() is used - no manager thread Applications that are known to have problems using NPTL include: - Sun JRE prior to version 1.4.1 - IBM JRE If an application does not work properly with NPTL, it can be run using the old LinuxThreads implementation by setting the following environment variable: LD_ASSUME_KERNEL=<kernel-version> The following versions are available: - 2.4.1 - Linuxthreads with floating stacks - 2.2.5 - Linuxthreads without floating stacks NPTL support for all dynamically-linked applications can be disabled by using the following boot-time option: nosysinfo o A new system message has been added to Red Hat Linux 9: application bug: <app-name>(<app-pid>) has SIGCHLD set to SIG_IGN but calls wait(). (see the NOTES section of 'man 2 wait'). Workaround activated. This message (which is displayed on the system console and/or in the system log files) indicates that the application is not completely standards compliant with respect to its handling of child processes. If you see this message, you should alert the application's developers. o Python has been compiled with UCS4 support (Unicode characters represented on 4 bytes) as opposed to UCS2. UCS4 allows one to represent characters outside of the Basic Multilingual Plane. Certain third-party libraries may stop working because of this change; recompiling these libraries should be sufficient to resolve the problem. Please note that "pure" python modules (whose code is written in python) or compiled modules that do not directly use Unicode are not affected by this change. o The fileutils, textutils, sh-utils, and stat packages have been replaced by the newer coreutils package. o The RPMs containing the Network Administration Tool have changed names and functions. The RPM redhat-config-network contains the tool's graphical user interface, while redhat-config-network-tui contains the tool itself (along with its text-based user interface). o Support for XHTML1 - the reformulation of HTML in XML - has been improved. This has been done by adding the xhtml1-dtd package, installing the DTDs in the system catalog, and adding native support in the libxml2 and xsltproc tools. o The redhat-switchmail command and package have been renamed redhat-switch-mail. The redhat-switchmail-gnome package has been renamed redhat-switch-mail-gnome. o The Oprofile system-wide profiler has been added to Red Hat Linux 9. OProfile is a programmer's tool for analyzing system performance, using special hardware built into many modern computers. Documentation for OProfile exists in the oprofile package; after installing Red Hat Linux 9, issue the command rpm -qd oprofile to obtain a listing of the available documentation. See the OProfile website at http://oprofile.sourceforge.net for more details. o GDB has been enhanced to allow debugging information for applications to be read from separate files. This makes it possible to extract debugging information from binaries and place them in a supplemental package. During the development of Red Hat Linux 9, "debuginfo" packages were generated for nearly every package by implementing special RPM macros. By default, the RPM macro configuration in Red Hat Linux 9 generates "debuginfo" packages. If you are building packages and do not want to generate "debuginfo" packages, add the following to your ~/.rpmmacros file: %define debug_package %{nil} Package Changes The following packages have been added to Red Hat Linux 9: - bluez-libs - Libraries for Bluetooth(TM) utility programs - bluez-utils - Bluetooth utility programs - bogl - Graphics library for framebuffers; used by the Red Hat Linux installation program - ckermit - Replaces gkermit - coreutils - Replaces fileutils, textutils, sh-utils and stat - desktop-printing - Drag-and-drop printing and print job icon - devlabel - Support for persistent storage device access - elfutils - Replaces libelf - fontilus - Font viewer for Nautilus - fonts-hebrew - Hebrew fonts - gnome-icon-theme - Icons for base GNOME environment - gnome-themes - Collection of themes for GNOME environment - gstreamer - Multimedia framework library - gstreamer-plugins - Input and output plugins for gstreamer - gthumb - Graphics viewer - hpoj - HP OfficeJet support - jwhois - Replaces whois - libgnomeprint22 - Updated libraries - libgnomeprintui22 - Updated libraries - libgsf - Library for reading/writing structured files - nautilus-cd-burner - CD burning support for Nautilus - nautilus-media - Audio playing support for Nautilus - openssl096b - Compatibility maintenance package - postgresql-odbc - ODBC support for PostgreSQL - postgresql72-libs - PostgreSQL 7.2 compatibility libraries - printman - Print queue management - pyorbit - Replaces orbit-python - redhat-config-samba - Samba configuration tool - redhat-switch-mail - Renamed from redhat-switchmail - soup - SOAP implementation library - startup-notification - Support for busy cursor - subversion - Version control system - tsclient - GUI client for VNS and Windows Terminal Server - ttmkfdir - Separated from XFree86 - vconfig - VLAN (802.1q) configuration program - xhtml1-dtds - XHTML1 support The following packages have been removed from Red Hat Linux 9: - WindowMaker - Developer resource constraints - Xft - Integrated into XFree86 - Xtest - No longer required by Anaconda - anonftp - functionality pulled into vsftpd package - bdflush - No longer required (needed by 2.2 kernels only) - fileutils - Replaced by coreutils - fortune-mod - Unclear copyright status - gkermit - Replaced by ckermit - ipvsadm - No longer part of Red Hat Linux product profile - kbdconfig - Replaced by redhat-config-keyboard - kernel-uml - Experimental package, removed - ksymoops - No longer required by kernel - libelf - Replaced by elfutils - librpm404 - No longer required compatibility library - libxml10 - No longer required compatibility library - mouseconfig - Replaced by redhat-config-mouse - openldap12 - No longer required compatibility library - openssl095a - No longer required compatibility library - orbit-python - Replaced by pyorbit - php-dbg-base - Not used within distribution - php-dbg-client - Not used within distribution - php-dbg-server - Not used within distribution - redhat-switchmail - Renamed to redhat-switch-mail - rhmask - Red Hat no longer distributes rhmask files - rpm2html - Deprecated by author - sh-utils - Replaced by coreutils - stat - Replaced by coreutils - textutils - Replaced by coreutils - timeconfig - Replaced by redhat-config-date - whois - Replaced by jwhois - wine - Developer resource constraints - wmapm - Part of Windowmaker removal - wmclock - Part of Windowmaker removal - wmix - Part of Windowmaker removal - wu-ftpd - vsftpd is the recommended FTP daemon - xtoolwait - Not used within distribution The following packages have been deprecated, and may be removed from a future release of Red Hat Linux: - pine - License-related issues - LPRng - CUPS is the recommended printing solution - Glide3 - Multi-platform issues - lilo - GRUB is the recommended bootloader - sndconfig - No longer required by mainstream hardware - ncpfs - No longer part of Red Hat Linux product profile - mars-nwe - No longer part of Red Hat Linux product profile Kernel Notes This section covers issues that are related to the Red Hat Linux 9 kernel. o Special Note: The ACL support added to the kernel in the first two public beta releases proved to be unstable and caused the kernel to regress. Red Hat has therefore removed that ACL support from the kernel for Red Hat Linux 9. Kernel engineers will continue work on improving the ACL support, which will be available in a future release. The attr and acl packages needed to support ACLs are still included to make it easier for users and developers who wish to test ACLs. Red Hat may, at our discretion, provide ACL support for this release of Red Hat Linux by means of an upgrade, if future testing demonstrates that the ACL support has sufficiently improved in quality. o The apic boot-time option allowing installation on systems with the Intel 440GX chipset has been removed because it caused a conflict with many newer systems: it caused SMM (System Management Mode) not to function, or to function incorrectly, causing installation on those systems to fail. Removing the apic boot-time option enables these newer systems to install successfully. A different workaround has been provided that allows at least some systems with the Intel 440GX chipset to boot; this workaround is automatically enabled, and requires no action on your part. If you have an Intel 440GX-based system and are unable to install Red Hat Linux 9 but a previous release of Red Hat Linux installs correctly, please file a bug report, and include the output (running on the previous release, of course) of the dmidecode program, run as root, with your bug report. Note however, that it will not be possible to install Red Hat Linux 9 at all. Systems with the 440GX chipset are supported only on a best-effort basis. Therefore, we welcome bug reports regarding systems with the 440GX chipset, but may or may not be able to resolve them. o The kernel support for the new NPTL feature changes several internal kernel programming interfaces significantly. As a result, several external kernel modules may not compile without modifications to match the new interfaces. Examples currently include the NVIDIA and ATI 3D modules, as well as any other modules that use kernel threads and/or signals. -- Charles R. Anderson <cra(a)wpi.edu> / http://angus.ind.wpi.edu/~cra/ PGP Key ID: 49BB5886 Fingerprint: EBA3 A106 7C93 FA07 8E15 3AC2 C367 A0F9 49BB 5886

1 0

Redhat 9.0 ISO
by Chuck Haines April 2, 2003

April 2, 2003

If anyone is lucky enough to be on the WPI network, redhat 9.0 ISO's are ready for download from the WPILA ftp server. Just ftp to wpila.wpi.edu from on campus and log in anonymously. Enjoy, Chuck Haines ==================================== Chuck Haines chaines(a)wpi.edu http://www.linux-xtreme.net ==================================== WPI ECE Systems Administrator WPI Game Development Club Developer WPI Linux Association Lab Manager Tau Kappa Epsilon Fraternity TKE-IT Systems Administrator ==================================== AIM: CyberGrex YIM: CyberGrex_27 ICQ: 3707881 ====================================

11 12

Looking for some help with Embedded Linux
by Michael Mathur April 1, 2003

April 1, 2003

We are a small company in Fraklin, Massachusetts, We are looking for some help with embedded linux project. The project involves networking, routing, streaming video/graphics/display management& routing, Web Browser and Server. Please contact me if you are interested. Michael BL Software Systems, Inc. (508) 520 3850 (508) 520 6970 (fax) MichaelMathur(a)attbi.com

1 0

book recommendations (LAMP)...
by Stephen C. Daukas April 1, 2003

April 1, 2003

Anyone hear anything about the book Open Source Web Development with LAMP: Using Linux, Apache, MySQL, Perl, and PHP by James B. Lee, Brent Ware ? I'm thinking about going over this type of content with my students... STeve

1 0

acpi
by Wesley Allen March 31, 2003

March 31, 2003

Hi gang, ACPI is FINALLY compiled into Mandrake's kernel; but I'm having a hitch. While the kernel will boot with acpi enabled every now and again, most times it gets to a point where keventd is called for and the kernel message is that it hasn't started yet. Any ideas what on earth might be happening? I'm going to the acpi list as well, but I'd see if any of you linux laptop users have had this problem (there are google hits for this problem, but I'm hitting a dead end there). Wes

1 0

RAS server
by Stéphane Purnelle March 30, 2003

March 30, 2003

Hi I would like make a RAS (Remote acces support) server on my linux. How make it ?

2 2

stupid question
by Wesley Allen March 29, 2003

March 29, 2003

Hi gang, I've hit a snag with mdk 9.1, the driver for my web cam no longer supports the default palette for gnomemeeting. So it tells me to check my driver docs to see what palettes are supported.... where is a good place to find kernel-driver docs? The module is pwc in case you were wondering..... Wes -- Wesley Allen <wallen(a)charter.net>

2 1

WLUG website idea
by Andy Stewart March 29, 2003

March 29, 2003

HI everybody, I had an idea...let me know what you think of it. I was thinking about creating a part of the WLUG website that would be a set of links to open source projects in which WLUG members are actively involved. For example, I wrote the users' guide for the GimpPrint software, so there would be a link to the GimpPrint website. If you think this is a good idea, please send me e-mail with your name, project name, and your involvement (doc writer, coder, tester, etc). Thanks, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

2 1

Tonight...
by Keller, Tim March 27, 2003

March 27, 2003

I'm not sure what Maddog's rules are on this, but would anybody (specifically, those at WPI, who might have access to the equipment) be interested in taping the lecture tonight? I've got access to a NLE machine and a DVD-R burner, so I could make DVD's out of the lecture if people would be interested. Thanks, Tim.

5 4

RE: [Wlug] Weird garbage characters in info/man
by Keller, Tim March 27, 2003

March 27, 2003

Eureka! I can't take credit for finding the fix, my co-worker found it on Usenet via google groups... The temporary solution was to export LANG=en_US the permanent solution is to edit /etc/sysconfig/i18n to make it permanent. I hope this helps others... Tim. -----Original Message----- From: Keller, Tim [mailto:Tim.Keller@stratus.com] Sent: Thursday, March 27, 2003 9:06 AM To: 'wlug(a)mail.wlug.org' Subject: [Wlug] Weird garbage characters in info/man I just created a RH 8.0 box for testing and when I go into info, there's garbage characters all over the place. Here's an example from the "info rpm" page... rpm {âEURâEURq|âEURâEURâEURâEURquery} [selectâEURâEURoptions] [queryâEURâEURoptions] I'm connected to the box vis SSH using teh "F-Secure SSH" client for windows. I've never had an issue with any other box. It's almost like some library or character set didn't get installed... Thanks, Tim. _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

Weird garbage characters in info/man
by Keller, Tim March 27, 2003

March 27, 2003

I just created a RH 8.0 box for testing and when I go into info, there's garbage characters all over the place. Here's an example from the "info rpm" page... rpm {âEURâEURq|âEURâEURâEURâEURquery} [selectâEURâEURoptions] [queryâEURâEURoptions] I'm connected to the box vis SSH using teh "F-Secure SSH" client for windows. I've never had an issue with any other box. It's almost like some library or character set didn't get installed... Thanks, Tim.

2 1

add memory, loose sound?
by Bill Mills-Curran March 27, 2003

March 27, 2003

I just added 128 MB of memory to my Dell Optiplex GX1, and now my sound card (on motherboard CS 4236) is no longer recognized. It's possible that I did something bad to the motherboard when inserting the memory cards. Or, is there any way that adding memory (now 128 + 128 + 64) could disable the sound? TIA, Bill

5 6

Reminder: Upcoming meeting Wed. March 26th 7 PM
by Andy Stewart March 26, 2003

March 26, 2003

Hi Everybody, I'm sending out this reminder early in the hope that we'll have alot of people coming to this WLUG meeting. At this meeting, our guest speaker will be Jon 'maddog' Hall. maddog is the executive director of Linux International and a great speaker. He has spoken at two (or three?) previous WLUG meeting and we're happy to have him back again. The meeting will be held in Kinnicutt Hall on the WPI campus in Worcester, MA (the usual place). If you need directions, they can be found on the WLUG website. Light refreshments will be served, and I'll bring a couple of items for the free (as in beer) raffle. After the meeting, we'll go out for pizza and beer at the Boynton Restaurant. Please pass the word around to all of your Linux friends! Later, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

2 1

Cheap Laptops...
by Keller, Tim March 21, 2003

March 21, 2003

While doing some research, I came across this site... http://www.pcsevolve.com/products/hotdeals.asp Under their "hot deals" they've got some great prices on laptops... Tim.

1 0