I forgot the attached file. And the writer model is 48125S not 18125S. Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev=0,0,0 gracetime=2 fs=2048k driveropts=burnfree,noforcespeed -v -useinfo speed=12 -dao -dummy -eject -pad -data "/rsrv/var/images/download1-01.img" ... scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.24 pregap1: -1 Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.7' Driveropts: 'burnfree,noforcespeed' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'LITE-ON ' Identifikation : 'LTR-48125S ' Revision : '1S05' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1422080 = 1388 KB FIFO size : 2097152 = 2048 KB Track 01: data 648 MB padsize: 30 KB Total size: 745 MB (73:49.85) = 332239 sectors Lout start: 745 MB (73:51/64) = 332239 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type B, low Beta category (B-) (4) ATIP start of lead in: -11933 (97:22/67) ATIP start of lead out: 359849 (79:59/74) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 43 Manufacturer: Acer Media Technology, Inc. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 27610 Forcespeed is OFF. Starting to write CD/DVD at speed 12 in dummy SAO mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Sending CUE sheet... Writing pregap for track 1 at -150 Starting new track at sector: 0 cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 05 16 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 08 03 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0x08 Qual 0x03 (logical unit communication crc error (ultra-dma/32)) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.033s timeout 200s Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 write track data: error after 2666496 bytes Writing time: 23.177s Average write speed 191.3x. Min drive buffer fill was 99% Fixating... WARNING: Some drives don't like fixation in dummy mode. Fixating time: 0.703s BURN-Free was never needed. cdrecord: fifo had 74 puts and 43 gets. cdrecord: fifo was 0 times empty and 33 times full, min fill was 75%.
Woops. Sorry, I didn't see this message before. First, let me admit that I don't understand most of what is here, but I'll try. It says that some drives don't like fixation in dummy mode, so have you tried burning for real without dummy mode? And why does it list the average write speed as 191.3x? Greg Stéphane Purnelle wrote:
I forgot the attached file. And the writer model is 48125S not 18125S.
------------------------------------------------------------------------
Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev=0,0,0 gracetime=2 fs=2048k driveropts=burnfree,noforcespeed -v -useinfo speed=12 -dao -dummy -eject -pad -data "/rsrv/var/images/download1-01.img" ...
scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.24 pregap1: -1 Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.7' Driveropts: 'burnfree,noforcespeed' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'LITE-ON ' Identifikation : 'LTR-48125S ' Revision : '1S05' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1422080 = 1388 KB FIFO size : 2097152 = 2048 KB Track 01: data 648 MB padsize: 30 KB Total size: 745 MB (73:49.85) = 332239 sectors Lout start: 745 MB (73:51/64) = 332239 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type B, low Beta category (B-) (4) ATIP start of lead in: -11933 (97:22/67) ATIP start of lead out: 359849 (79:59/74) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 43 Manufacturer: Acer Media Technology, Inc. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 27610 Forcespeed is OFF. Starting to write CD/DVD at speed 12 in dummy SAO mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Sending CUE sheet... Writing pregap for track 1 at -150 Starting new track at sector: 0 cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 05 16 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 08 03 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0x08 Qual 0x03 (logical unit communication crc error (ultra-dma/32)) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.033s timeout 200s
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 write track data: error after 2666496 bytes Writing time: 23.177s Average write speed 191.3x. Min drive buffer fill was 99% Fixating... WARNING: Some drives don't like fixation in dummy mode. Fixating time: 0.703s BURN-Free was never needed. cdrecord: fifo had 74 puts and 43 gets. cdrecord: fifo was 0 times empty and 33 times full, min fill was 75%.
Le sam 24/05/2003 à 15:14, Gregory Avedissian a écrit :
Woops. Sorry, I didn't see this message before.
First, let me admit that I don't understand most of what is here, but I'll try.
It says that some drives don't like fixation in dummy mode, so have you tried burning for real without dummy mode? And why does it list the average write speed as 191.3x?
I don't know why the speed is 191.3x, but I use the dummy mode because, I don't would like to burn CD will become BAD. The problem is the scsi message : cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 05 16 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 08 03 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0x08 Qual 0x03 (logical unit communication crc error (ultra-dma/32)) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.033s timeout 200s Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 write track data: error after 2666496 bytes Writing time: 23.177s Ps : Excuse for my bad english
Greg
Stéphane Purnelle wrote:
I forgot the attached file. And the writer model is 48125S not 18125S.
------------------------------------------------------------------------
Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev=0,0,0 gracetime=2 fs=2048k driveropts=burnfree,noforcespeed -v -useinfo speed=12 -dao -dummy -eject -pad -data "/rsrv/var/images/download1-01.img" ...
scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.24 pregap1: -1 Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.7' Driveropts: 'burnfree,noforcespeed' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'LITE-ON ' Identifikation : 'LTR-48125S ' Revision : '1S05' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1422080 = 1388 KB FIFO size : 2097152 = 2048 KB Track 01: data 648 MB padsize: 30 KB Total size: 745 MB (73:49.85) = 332239 sectors Lout start: 745 MB (73:51/64) = 332239 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type B, low Beta category (B-) (4) ATIP start of lead in: -11933 (97:22/67) ATIP start of lead out: 359849 (79:59/74) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 43 Manufacturer: Acer Media Technology, Inc. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 27610 Forcespeed is OFF. Starting to write CD/DVD at speed 12 in dummy SAO mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Sending CUE sheet...
Writing pregap for track 1 at -150 Starting new track at sector: 0 cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 05 16 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 08 03 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0x08 Qual 0x03 (logical unit communication crc error (ultra-dma/32)) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.033s timeout 200s
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 write track data: error after 2666496 bytes Writing time: 23.177s Average write speed 191.3x. Min drive buffer fill was 99% Fixating... WARNING: Some drives don't like fixation in dummy mode. Fixating time: 0.703s BURN-Free was never needed. cdrecord: fifo had 74 puts and 43 gets. cdrecord: fifo was 0 times empty and 33 times full, min fill was 75%.
_______________________________________________ Wlug mailing list Wlug@mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug
participants (2)
-
Gregory Avedissian -
Stéphane Purnelle