- WLUG - wlug.mailman3.com

Screen goes blank with ubuntu and geforce 8800 GTS.
by Kieran O'Callaghan June 16, 2007

June 16, 2007

I have system I just put together with a PCI-Express Geforce 8800 GTS running ubuntu 7.04. During installation of Ubuntu everything showed up fine on screen. After installation, I ran into the problem that right after grub starts loading linux, the screen goes blank (monitor light turns from green to amber) and stays that way right up until X loads, at which point I get video. This hasn't been a problem so far, but I just installed some updates and it seems like now X isn't loading or I'm getting some sort of message before X loads, because it turns on and just stays blank the whole time. It seems like it would be easy if I just put a different video card into the system, but I don't even have another PCI express video card. I also don't have any PCI video cards anymore. All I have are AGP cards and the system doesn't have an AGP slot. So, it looks like taking the hard drive out and moving it to another system is the only option. Any thoughts on why the screen is doing that would be appreciated. The monitor doesn't seem to be getting no signal, because normally it brings up a message saying no signal rather than just blanking. It seems more like it's gone into a power saving mode. I've tried it with other monitors and had the same results. -- Kieran O'Callaghan

5 4

Re: [Wlug] Reminder: Meeting this evening 7:00 PM
by freak4uxxx＠gmail.com June 14, 2007

June 14, 2007

i've palyed with it once or twice. Two heads are better than one, right? -Eric -----Original Message----- From: "Klein, Richard" <Richard.Klein(a)cytyc.com> Subj: Re: [Wlug] Reminder: Meeting this evening 7:00 PM Date: Thu Jun 14, 2007 12:58 pm Size: 887 bytes To: "Worcester Linux Users Group" <wlug(a)mail.wlug.org> > -----Original Message----- > From: Andy Stewart > > HI gang, > > I completely forgot that we have a WLUG meeting this evening > (Thursday, June 14th) at 7:00 PM. My apologies for not > updating the website or sending the normal reminder email. > > Let's get together and chat about our favorite subject - > Linux! We always find some way to entertain ourselves for an > hour or so before heading off to the pizza restaurant. > > I'll see you tonight. > > Andy I'm not sure if I'll make it tonight, but if I do, is anyone familiar with RoadNav (http://roadnav.sourceforge.net/)? I have it installed on my laptop, but I don't really know my way around the program yet, and I'd love to have someone show me what I can do with it. -- Rich Klein _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

Reminder: Meeting this evening 7:00 PM
by Andy Stewart June 14, 2007

June 14, 2007

HI gang, I completely forgot that we have a WLUG meeting this evening (Thursday, June 14th) at 7:00 PM. My apologies for not updating the website or sending the normal reminder email. Let's get together and chat about our favorite subject - Linux! We always find some way to entertain ourselves for an hour or so before heading off to the pizza restaurant. I'll see you tonight. Andy -- Andy Stewart Advanced Micro Devices Boston Design Center 90 Central St. MS 83-29 Boxborough, MA 01719 (978) 795-2669

3 2

Re: [Wlug] Reminder: Meeting this evening 7:00 PM
by freak4uxxx＠gmail.com June 14, 2007

June 14, 2007

I was gonna ask.... -Eric -----Original Message----- From: "Andy Stewart" <andy.stewart(a)amd.com> Subj: [Wlug] Reminder: Meeting this evening 7:00 PM Date: Thu Jun 14, 2007 11:58 am Size: 646 bytes To: wlug(a)mail.wlug.org HI gang, I completely forgot that we have a WLUG meeting this evening (Thursday, June 14th) at 7:00 PM. My apologies for not updating the website or sending the normal reminder email. Let's get together and chat about our favorite subject - Linux! We always find some way to entertain ourselves for an hour or so before heading off to the pizza restaurant. I'll see you tonight. Andy -- Andy Stewart Advanced Micro Devices Boston Design Center 90 Central St. MS 83-29 Boxborough, MA 01719 (978) 795-2669 _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

JOBS - Linux drivers consulting roles
by John Spencer June 11, 2007

June 11, 2007

We have a couple of clients here in MA looking for Linux consulting help. Details are as follows: Mid to Sr level Linux drivers Engineer Linux driver development contract for 9+ months in embedded development team. Job responsibilities include learning hardware from hardware design specs, developing a design and documenting it, developing the design, and debugging the driver in an embedded environment. Preferred candidate would have 3-6 years of Linux driver development. DUTIES AND RESPONSIBILITIES include the following: Focus will be on design and development of 2.6 Linux kernel drivers for proprietary FPGAs and some 3rd party parts like Ethernet switches. Experience developing Linux drivers in an embedded environment. Experience developing Linux drivers in Linux 2.6.current kernel is preferred but 2.4 is acceptable. Experience with PowerPC or processors Experience debugging Linux drivers. Able to work with current team members including kernel, driver, and application disciplines. Good oral and written communication skills. ************************************************************************ ************* Sr to Prin Level consultant (6 mths) Our Client is looking for a Linux Engineer to port their existing systems software platform (drivers, BSP's, kernel, applications) from 2.4 to 2.6 Linux. This effort has just started and and THEY have the kernel up and running (bash shell). Will upgrade the existing build infrastructure for loadable kernel modules to comply with Linux kbuild. Port existing loadable kernel modules, applications, and libraries written for version 2.4.20 to 2.6.17. Apply third-party and proprietary patches to the kernel source. Assist with hardware and user mode Linux-based simulator startup and initialization. Ideally, we need someone who has worked on this exact type of porting effort and has dealt with many of the issues/challenges in this type of port. Experience with UML is required since they use User ModeLinux as their Emulation/Development tool. Regards, John John Spencer (978) 256-1113 ext 7608 jspencer(a)optimaleng.com OPTIMAL ENGINEERING PARTNERS "Your Optimal partner for full-lifecycle engineering services in embedded and real-time, systems and application development" www.optimalengineering.com <http://www.optimalengineering.com/>

1 0

JOB - Unix File Systems - off-site work is fine
by John Spencer June 11, 2007

June 11, 2007

We have a client looking for Unix File Systems long-term consulting help. This work can be done remotely with occasional visits to client site out of state. Details are as follows: Project Description: This is a need for a Sr. File Systems Engineer to work remotely via a virtual office, There is potential for a client visit every 6-8 weeks. This is a very strategic and high visibility project with a large end-client. Optical based storage, OSD project. This resource will be part of the core program that is in charge of fully designing a file system for work in conjunction with an OSD driver. There are around 5 people on the project - 2 SCSI engineers/1 file systems engineer/1 embedded engineer. They are in the architecture phase right now. Even with the consultant working from a virtual office, they will be held accountable to a regular schedule, (meaning you must work core business hours) Required Skills: - Unix file systems (Constructs such as VFS, vnodes, inodes, caching, B+trees, disk layouts, index and hashing mechanisms) - File System Internals experience is key (Understand of, and ability to comfortably converse about, inodes, allocations groups, how to manipulate internals of a file system) - SW development - Strong C - Strong Unix - Unix development tools - Embedded systems development is a big plus - NetBSD is a big plus **** A junior file systems engineer would still be considered as long as they have a reasonable amount of understanding of File systems internals. **** Regards, John John Spencer (978) 256-1113 ext 7608 jspencer(a)optimaleng.com OPTIMAL ENGINEERING PARTNERS "Your Optimal partner for full-lifecycle engineering services in embedded and real-time, systems and application development" www.optimalengineering.com <http://www.optimalengineering.com/>

1 0

Re: [Wlug] Hardware Vendor Search (a bit off list)
by Mike Leo June 8, 2007

June 8, 2007

Expert Server Group in Bedford NH. http://www.expertserver.com/ Worked with them for years and they are awesome. Jenn Heiberg is our current rep, but Amy Fournier is cool, too. They are a var, too. VMWare experts and such. ----- Original Message ---- From: Tal Cohen <wlug(a)cohen123.com> To: wlug(a)mail.wlug.org Sent: Friday, June 8, 2007 3:20:36 PM Subject: [Wlug] Hardware Vendor Search (a bit off list)  Does anyone know a good, reliable, hardware vendor that they can recommend? I need to purchase 4-7 2U servers and our existing vendor is dragging his feet. Thanks, Tal _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

Re: [Wlug] Hardware Vendor Search (a bit off list)
by Jamie Guinan June 8, 2007

June 8, 2007

I had a really bad experience trying to buy a 1U server from a vendor I saw in Linux Journal, thinking I'd support a "linux-friendly" company. Well, after they charged my CC, it took them 3 *weeks* to start the system burn-in, the system *failed* burn-in, they said it would take at least another week... so I finally told them to screw off and got my money back. I ended up buying a dirt-cheap 1U Celeron (Cybertron) from TigerDirect, which I colo'd with a Level3 reseller in Cambridge. Its been humming along for 2 years so far. So if you're willing forego the "value add" (pronounced with dripping sarcasm and doing the "quotes" motion with my fingers) that some vendors might provide, and you can install and configure your own Linux distro, you might try TigerDirect or another generic online vendor. -Jamie On Fri, 8 Jun 2007, Tal Cohen wrote: > Does anyone know a good, reliable, hardware vendor that they can recommend? > I need to purchase 4-7 2U servers and our existing vendor is dragging his > feet. > > > > Thanks, > Tal

1 0

Hardware Vendor Search (a bit off list)
by Tal Cohen June 8, 2007

June 8, 2007

Does anyone know a good, reliable, hardware vendor that they can recommend? I need to purchase 4-7 2U servers and our existing vendor is dragging his feet. Thanks, Tal

1 0

Seeking Linux help for area non-profit - compensation potential
by Mike Peckar June 5, 2007

June 5, 2007

Please do not reply to the list or to me. Boylston's public cable access channel (WBAC) is seeking to expand its services and offer Video on Demand and video file upload and download services for its staff and eventually the community. They currently have their web site and email hosted with an ISP and they are happy with that, but the ISP cannot provide them with these new services. They are looking for help in installing and configuring a linux box off their private LAN for this purpose. They also need other general help with their setup including configuring and troubleshooting VPN connections via their netgear VPN/firewall, etc. These folks are sort of windows literate, and they recognize that Linux will provide them with the most secure and cost-effective solution to meet their growing needs at this time. Ideally, they are seeking Boylston residents, but they are willing to bring in help from outside their community. They are also able to reasonably compensate for the above mentioned services and/or barter for access to their fine production equipment. If you are intersted in learning more about video and television production, this may be well worth your effort. To express your interest, please provide a brief summary of your skills, your level of interest in supporting WBAC, and any compensation requirements to: Tom Martiska Staff(a)wbactv.org

1 0