- WLUG - wlug.mailman3.com

writer problem
by Stéphane Purnelle May 24, 2003

May 24, 2003

I forgot the attached file. And the writer model is 48125S not 18125S. Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev=0,0,0 gracetime=2 fs=2048k driveropts=burnfree,noforcespeed -v -useinfo speed=12 -dao -dummy -eject -pad -data "/rsrv/var/images/download1-01.img" ... scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.24 pregap1: -1 Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.7' Driveropts: 'burnfree,noforcespeed' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'LITE-ON ' Identifikation : 'LTR-48125S ' Revision : '1S05' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1422080 = 1388 KB FIFO size : 2097152 = 2048 KB Track 01: data 648 MB padsize: 30 KB Total size: 745 MB (73:49.85) = 332239 sectors Lout start: 745 MB (73:51/64) = 332239 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type B, low Beta category (B-) (4) ATIP start of lead in: -11933 (97:22/67) ATIP start of lead out: 359849 (79:59/74) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 43 Manufacturer: Acer Media Technology, Inc. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 27610 Forcespeed is OFF. Starting to write CD/DVD at speed 12 in dummy SAO mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Sending CUE sheet... Writing pregap for track 1 at -150 Starting new track at sector: 0 cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 05 16 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 08 03 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0x08 Qual 0x03 (logical unit communication crc error (ultra-dma/32)) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.033s timeout 200s Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 write track data: error after 2666496 bytes Writing time: 23.177s Average write speed 191.3x. Min drive buffer fill was 99% Fixating... WARNING: Some drives don't like fixation in dummy mode. Fixating time: 0.703s BURN-Free was never needed. cdrecord: fifo had 74 puts and 43 gets. cdrecord: fifo was 0 times empty and 33 times full, min fill was 75%.

2 2

cd-writer problem
by Stéphane Purnelle May 24, 2003

May 24, 2003

Hi I have a problem with my cd-writer. On windows, I have no problem (dommage). But with my redhat 8.0 kernel 2.4.18-24.8.0. I cannot burn a CD. maybe it's a bad version of kernel ? writer : liteon 18125s 48x12x48 with burn proof (http://www.liteonit.com) You can read the output of x-cd-roast in the attached file. than you for your futur anwser

2 3

Interesting reading
by Andy Stewart May 20, 2003

May 20, 2003

http://www.opensource.org/sco-vs-ibm.html -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

1 0

http load generators
by twg3＠attbi.com May 20, 2003

May 20, 2003

Does anyone have any recommendations of open source tools for generating very high volume http traffic simulating large numbers of clients form multiple IP addresses? I did a search on sourceforge and most of the projects have not released any new code in 18 months or more - so not sure of status on most of them. I need to test an application that uses HTTP as its transport layer (but not HTML) so open source tools would allow the customizations I need, with out haveing to write everything from scratch.

4 3

scanner help
by Bill Mills-Curran May 20, 2003

May 20, 2003

I have a new Epson 1660 scanner, and I'm having difficulty getting it working with the sane drivers. Here's what I have thus far... 1. lsusb worked immediately. Here's some of the output: Bus 001 Device 001: ID 0000:0000 Virtual Hub Device Descriptor: <snip> Bus 001 Device 002: ID 04b8:011e Seiko Epson Corp. Device Descriptor: <snip> Bus 001 Device 003: ID 03f0:0317 Hewlett-Packard Device Descriptor: <snip> (I recently unloaded & loaded the USB & printer modules, and the device numbers for the printer (HP) and scanner (Epson) changed.) 2. sane-find-scanner: found USB scanner (vendor = 0x04b8, product = 0x011e) at device /dev/usb/scanner0 This did not work until I added this to the /etc/modules.conf file and modprobe'd "scanner": options scanner vendor=0x04b8 product=0x011e 3. My /etc/sane.d/epson.conf file has: usb /dev/usb/scanner0 (Is that right? I did try some other devices) I also tried usb 0x04b8 0x011e No luck 4. I chmod'd (666) /dev/usb/scanner*. 5. xsane always fails. Here are some of the messages. > xsane no devices available > xsane epson:/dev/usb/scanner0 Failed to open device 'epson:/dev/usb/scanner0': Operation not supported. Any suggestions? TIA, Bill P.S. I'm running stock Red Hat 8.0. (I have installed the ALSA sound modules.)

2 4

Xfer mail from Outlook to...
by Stephen C. Daukas May 19, 2003

May 19, 2003

Anyone out there know how to get email out of Outlook/Exchange and into something else? I use outlook at work, and also at home when doing stuff for work, but want to get all that stuff into a flat file similar to what UNIX uses (used?), which is also similar to what Eudora uses. In other words, I want to get away from Outlook/exchange all together and get into a format that is easily manipulated by scripts or easily imported into other email applications. Any help would be greatly appreciated! Regards, Steve

4 4

Testing WLUG e-mail list
by Andy Stewart May 18, 2003

May 18, 2003

...I'm trying to figure out why I got 14 copies (literally!) of Steve Daukas' posting, as well as a couple of others. Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

4 4

Clarification: location of next meeting
by Andy Stewart May 14, 2003

May 14, 2003

HI Everybody, There was a minor error on the WLUG home page that might have caused some confusion. The next WLUG meeting is in a new location, that being Olin Hall room 107. FYI: I'm told that the lobby area of Salisbury Labs is/will be undergoing renovation, hence we cannot use that room for the entire summer, so we'll be in Olin Hall 107 for the next few meetings. My apologies if there was any confusion. Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

1 0

Computer 4 sale
by Marc Hughes May 12, 2003

May 12, 2003

Dual PIII 1ghz Case + power 512mb ram 2 Hard Drives - 16gig + 8gig (or about that size) Sony IDE CDRW (fast, I think 48x,24x,16x) Ensoniq 5880 AudioPCI Ethernet card $400 There will be 2 big gaping holes in the front if I can't find the 5 1/4 drive bay covers. No video card. Also, nVidia geForce 3 and above cards don't work with this motherboard. nVidia blames it on Tyan, and Tyan blames it on nVidia. My Radeon 7550 works just fine (but you don't get that). If you want, I have an old voodoo3 card which was in this at one point, it worked then, you can have it for free with the computer. Under Windows, I was never able to get USB working well (keyboard was fine, camera + mouse weren't). Under linux, usb worked 100%, so I'm assuming it's just my luck with windows and not the hardware. I will be wiping the drives clean before selling it, so you're on your own for an OS. I think one of the drives may be mounted "creatively" so be forewarned. If anyone wants it, hopefully we can arrange a drop-off & pickup, perhaps at a wlug meeting to avoid any shipping. Please send replies to me, and not the list. -Marc

1 0

REMINDER: WLUG Meeting Thurs. May 15th 7:00 PM
by Andy Stewart May 11, 2003

May 11, 2003

HI Everybody, This is a reminder about the upcoming WLUG meeting, to be held on Thursday, May 15th, 2003 at 7:00 PM in Olin Hall 107 (note new location!) on the WPI campus in Worcester, MA. At this meeting, our guest speaker will be Vince McHugh. Vince will talk to WLUG about the Common Unix Printing System (CUPS). The second part of Vince's talk will be about imaging and scanning. In this context, Vince will talk about how his company, NECS, is making Canon scanning products work in the Linux environment. Vince is a member of GNHLUG and is also a Systems Support Manager for NECS/Canon (the largest independent Canon dealer in New England). Vince has been involved with Linux for the last 4-5 years, and also possesses a Novell CNE and a Windows MCP. Light refreshments will be served at the meeting. Afterwards, we'll go to the Boynton Restaurant for pizza and beer. All are welcome! -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

1 0

Re: [Wlug] Redhat GUI performance
by twg3＠attbi.com May 9, 2003

May 9, 2003

Some of this may also be related to the OS scheduler and VM configuration of the kernel - both of which have been improved in the new 2.5/2.6 kernel. The new shceduler is preemptive and does a better job of giving interactive processes a higher priority which makes the box "feel" faster. It is because of this feel, that I actually run a 2.2 kernel on my desktop/workstation since it feels faster than a 2.4 kernel (but does not support as much hardware which I can run 2.5 for if I need to). > > I've notice that when going from redhat 7.x to 8 or 9 you need a > minimum of 256M RAM. with 128M and running gnome there is way too > much swap space in use. > > Gnome and KDE are very bulky GUI's.. twm or blackbox are the slimest > and fastest. A friend of mine runs gentoo linux and it seems very > fast compared to redhat on the same box. > > type the "free" command at the prompt and see your memory usage also > "ps aumx" to see process memory usage. > > I would reccomend spending the roughly $40 to get a 256M upgrade for > your box. More RAM almost always helps. The os can keep more things > in memory and give you a faster response. I use 512M myself. > > hope this helps > > On Fri, 9 May 2003, Hemstreet, Jeffrey L (Jeffrey) wrote: > > > I have a general question about Linux performance... > > > > I am running Redhat 8.0 on a Dell 400MHz, 128MB system (OptiPlex) with an > > 8MB ATI Rage Pro Video card. I have a fairly basic workstation installation, > with > > SSHd, ftpd, telnetd, apached, and a couple other services running. Gnome > seems > > to take forever to open windows/applications. It can be on the order of 10 > seconds > > to a minute for some applications to come up. (Mozilla is one of the worst, > even > > to just bring up a local file as the home page for the browser) > > > > Is Gnome just a very slow GUI, or is there something that I can do to speed up > my > > system?? > > > > I know of several (5-6) people who have installed RedHat 7.2...8.0 on Dell and > Sony > > systems (all CPU are 866MHz+) with Gnome or KDE and the performance has been > > very slow in the GUI. Even with a higher end 1.5GHz CPU/512MB RAM system. > > > > Is there a Linux distribution that has a standard GUI that is very responsive? > Is Redhat > > just too bulky to run quickly, or do I need to download a better GUI for > Redhat? > > > > With Windows2000, this system was very responsive, and the other people I know > > about are running XP, which is so much faster that they run XP most of the > time now. > > > > Thanks, > > jeff > > > > > > > > -- > > €º°`°º€ø,žž,ø€º°`°º€ø,žž,ø€º°`°º€ø,žž,ø€º°`°º€ø,žž,ø€º°`°º€ø > Karl Hiramoto <karl(a)hiramoto.org> > Work: 978-425-2090 ext 25 > Cell: 508-517-4819 > Personal web page: http://karl.hiramoto.org/ > Freedom: http://www.technojihad.com/ > Zoop Productions: http://www.zoop.org/ > KTEQ Rapid City: http://www.kteq.org/ > AOL IM ID = KarlH420 Yahoo_IM = karl_hiramoto > €º°`°º€ø,žž,ø€º°`°º€ø,žž,ø€º°`°º€ø,žž,ø€º°`°º€ø,žž,ø€º°`°º€ø > > The hardest thing is to disguise your feelings when you put a lot of > relatives on the train for home. > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

3 2

Redhat GUI performance
by Hemstreet, Jeffrey L (Jeffrey) May 9, 2003

May 9, 2003

I have a general question about Linux performance... I am running Redhat 8.0 on a Dell 400MHz, 128MB system (OptiPlex) with an 8MB ATI Rage Pro Video card. I have a fairly basic workstation installation, with SSHd, ftpd, telnetd, apached, and a couple other services running. Gnome seems to take forever to open windows/applications. It can be on the order of 10 seconds to a minute for some applications to come up. (Mozilla is one of the worst, even to just bring up a local file as the home page for the browser) Is Gnome just a very slow GUI, or is there something that I can do to speed up my system?? I know of several (5-6) people who have installed RedHat 7.2...8.0 on Dell and Sony systems (all CPU are 866MHz+) with Gnome or KDE and the performance has been very slow in the GUI. Even with a higher end 1.5GHz CPU/512MB RAM system. Is there a Linux distribution that has a standard GUI that is very responsive? Is Redhat just too bulky to run quickly, or do I need to download a better GUI for Redhat? With Windows2000, this system was very responsive, and the other people I know about are running XP, which is so much faster that they run XP most of the time now. Thanks, jeff

2 1

RE: [Wlug] /tmp
by twg3＠attbi.com May 9, 2003

May 9, 2003

Good advice. The X window system amd font server create its unix domain sockets as files under /tmp along with other programs, which will not show up doing "fuser -u /tmp/*". Also do a "netstat -pA" to get a list of all the unix domain sockets and look for files in /tmp. The -p will let you know which program you will break if you delete the socket, but just leave those files alone as they are not taking up any space on the file system, just an inode. > Gregory, > > You'll want to do a "fuser -u /tmp/*" and see what files are currently in > use. If it's currently not in use, it's probably safe to delete. > > Tim. > > -----Original Message----- > From: Gregory Avedissian [mailto:avedis@rcn.com] > Sent: Thursday, May 08, 2003 12:14 PM > To: wlug(a)mail.wlug.org > Subject: [Wlug] /tmp > > > Is it safe to delete the contents of the /tmp directory to make some > space on the drive? > > Thanks. > > Greg > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

1 0

RE: [Wlug] /tmp
by Keller, Tim May 8, 2003

May 8, 2003

Gregory, You'll want to do a "fuser -u /tmp/*" and see what files are currently in use. If it's currently not in use, it's probably safe to delete. Tim. -----Original Message----- From: Gregory Avedissian [mailto:avedis@rcn.com] Sent: Thursday, May 08, 2003 12:14 PM To: wlug(a)mail.wlug.org Subject: [Wlug] /tmp Is it safe to delete the contents of the /tmp directory to make some space on the drive? Thanks. Greg _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

/tmp
by Gregory Avedissian May 8, 2003

May 8, 2003

Is it safe to delete the contents of the /tmp directory to make some space on the drive? Thanks. Greg

1 0

SuSE 8.2
by Michael Long May 5, 2003

May 5, 2003

Howdy, I am looking for the zope rpm's, including the source rpm, from the SuSE 8.2 cd's. Would anyone have them? Thanks, Mike

1 0

A bit off topic - phpnuke et al.
by Stephen C. Daukas May 1, 2003

May 1, 2003

I'm posing this question becuase I'm betting some on this list have ventured down the path before me... I'm looking to avoid having to keep up on the latest and greatest web development stuff just to have a useful an interesting site. So, I'm looking for something like phpnuke to convert over to. I am aware of phpnuke, and other similar packages out there. I'm planning on downloading nuke to see what it can and can't do... I wouldn't mind having control over things providing I have the time, but am to the point where I do not want ot have to write code every time I get an idea. I already have a job... So, anyone have a favorite tool, collection of tools, etc., that they would recommend for a person site that supports logins, discussion threads, etc.? Steve

4 11

CD burning question...
by Bill Mills-Curran May 1, 2003

May 1, 2003

If I burn a CD from an ISO, should I be able to duplicate the MD5SUM: md5sum file.iso md5sum /dev/scd0 Right? (I think I'm getting some errors while burning.) Thanks, Bill

2 1

Re: Wlug digest, Vol 1 #576 - 4 msgs
by Arturo April 30, 2003

April 30, 2003

Cool little set of scripts. They even come with that funky Desktop icon. What a luxury! Working through the scripts though it seems that the USB system does not see the USB device properly. Looking through some posts it looks like there is light at the end of the tunnel. Kernel 2.4.21 will have the updated usbnet patch that will allow communication with the 5600. I expect I'll be able to make some minor mods to the zaurus_check script and it should work like a charm. Thanks! Arturo > --__--__-- > > Message: 2 > From: John Murphy <jfmurphy(a)charter.net> > To: wlug(a)mail.wlug.org > Subject: Re: [Wlug] Does anyone have experience with the Zaurus 5600 and linux? > Date: Mon, 28 Apr 2003 12:27:30 -0400 > charset="iso-8859-1" > Reply-To: wlug(a)mail.wlug.org > > On Sunday 27 April 2003 18:00, Arturo wrote: > > From the looks of it, 5600 connectivity through usbnet is still pretty > > bleeding edge. Has anyone out there gotten the Zaurus SL-5600 connected > > with a linux desktop? > > > > Sharp was not kind in getting compatibility with linux. Anyhow, if > > anyone has any pointers let me know. > > > > Thanks > > Arturo > > I have 5500 with Suse 8.2, sync with Qtopia running the Sharp package. Have > been using right along in Suse 8.1, just installed it the other day with Suse > 8.2. If you have trouble with Linux look at the file zaurus_check-1.0. > > http://www.killefiz.de/zaurus/showdetail.php?app=853 > > I would assume it could be helpful in automating the sync with the desktop for > the 5600. Obviously I don't have a 5600 but this is what worked for me with a > 5500. > > > John > > -- > Arturo <wlug(a)sedo.net>

1 0

scanners
by Bill Mills-Curran April 30, 2003

April 30, 2003

I'm shopping for a linux-compatible scanner, preferrably with USB connectivity. Any suggestions about models and sources? TIA, Bill

3 4

Does anyone have experience with the Zaurus 5600 and linux?
by Arturo April 28, 2003

April 28, 2003

>From the looks of it, 5600 connectivity through usbnet is still pretty bleeding edge. Has anyone out there gotten the Zaurus SL-5600 connected with a linux desktop? Sharp was not kind in getting compatibility with linux. Anyhow, if anyone has any pointers let me know. Thanks Arturo -- Arturo <postgres(a)sedo.net>

2 1

FW: [Wlug] A bit off topic - phpnuke et al.
by Brett Russ April 28, 2003

April 28, 2003

OOPS, hit ctrl-enter by mistake. Continued below... > I'm anxious to hear anyone's feedback on this issue because I > would like to > break out of the nuke mold because every nuke site pretty much looks and > feels the same. I'm going to look into migrating to Zope. This site lists a bunch of CMS's, see the listings under Open Source: http://www.cmswatch.com/ContentManagement/Products/ I like what I saw so far on Zope, and there have been recent articles about it in Linux Journal (or Magazine...). Example sites here: http://www.zope.org/Resources/ZopePowered BR

3 3

Toshiba e330 + Linux
by Chuck Haines April 28, 2003

April 28, 2003

I've had a Toshiba e330 for about 3 months now, however it runs windows and I can't interface it with my linux machine. I was curious if anyone had any information regarding putting linux on one of these babies. I plan to get a wireless card and GPS adaptor for it soon, so how would that affect it. Any help would be much appreciated. Thanks, Chuck -- ==================================== Chuck Haines chaines(a)wpi.edu http://www.linux-xtreme.net ==================================== WPI ECE Systems Administrator WPI Game Development Club Developer WPI Linux Association Lab Manager Tau Kappa Epsilon Fraternity TKE-IT Systems Administrator ==================================== AIM: CyberGrex YIM: CyberGrex_27 ICQ: 3707881 ====================================

3 4

Anyone know anything about midgard?
by Stephen C. Daukas April 28, 2003

April 28, 2003

This is a Zope or phpnuke type set-up. it is LAMP-based (Linux, Apache, mySQL, perl/php)... Steve

1 0

RH9 and MySQL
by Bill Smith April 24, 2003

April 24, 2003

Anyone know off-hand what version(s) of MySQL is available with the RH9 installation? I checked out the RH website, but i didn't get any useful information. I'm looking to see if the latest MySQL release (4.x) is included... Thanks for any information... -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- William Smith wsmith-at-chezsmith-dot-com Fall River, MA http://www.chezsmith.com We're all vertebrates here... Show some BACKBONE! * TAG! v3.1 *

2 2