- WLUG - wlug.mailman3.com

Wanted: Used monitor
by Andy Stewart Aug. 9, 2003

Aug. 9, 2003

Hi everybody, I'm looking for a used monitor as a spare for my basement lab bench: 14" or 15" Multi sync Capable of at least 1024x768 at 72 Hz (or better) Relatively good cosmetic condition Excellent working condition Cheap(!) If you have something which might interest me, contact me directly and we can negotiate. Thanks, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

1 0

Hard drive crashed!
by Andy Stewart Aug. 9, 2003

Aug. 9, 2003

HI everybody, I've been out of touch all week due to a catastrophic hard drive failure. My hard drive is only 1.5 years old and its an IBM Ultrastar 18 GB SCSI drive with a 5 year warranty. IBM/Hitachi will be getting it back assuming it fails their diags, which I have to run as a prerequisite to getting an RMA. Naturally, they are DOS based diags. They have incredibly fussy rules about packing the drive for shipment, lest one voids one's warranty (say that three times fast). Believe it or not, it died while I was doing the tape backup!! I lost about 1 weeks worth of Quicken transactions and the photos from my sister's wedding (which I can recover from CDs previously burned for other family members). I got lucky. The moral of the story is: Make sure you do your backups! This is the 2nd hard drive that I've lost in the last 12 months (the first one was over 5 years old). Or, just run most of your machines as LTSP clients and don't worry about disks..... :-) Later, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

1 0

Re: [Wlug] libcrypto.so.4
by Michael Long Aug. 7, 2003

Aug. 7, 2003

I found what looks like the source files from a tar package in /usr/src/packages/BUILD/Python-2.2.3. It appears that I could build it by running the usual ./configure make ... process. There are no rpms in /usr/src/packages/RPMS/. Do I need to build the rpm from this? As a reminder I am using the SuSE 8.2 distro so the directory structure is slightly different. --Mike > > Did you install the resulting i386.rpm files from the rebuild step? > They should have ended up in /usr/src/redhat/RPMS/i386 > > -- > Charles R. Anderson <cra(a)wpi.edu> / http://angus.ind.wpi.edu/~cra/ > PGP Key ID: 49BB5886 > Fingerprint: EBA3 A106 7C93 FA07 8E15 3AC2 C367 A0F9 49BB 5886 > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > > >

1 0

Re: [Wlug] libcrypto.so.4
by Michael Long Aug. 7, 2003

Aug. 7, 2003

I have discovered that the files in the expat-devel package are already installed on the system so I ran rpmbuild --rebuild --nodeps .... It appeared to compile with a lot of warnings about anti-aliasing. Unfortunately the warnings scrolled out of the term buffer so I don't have the exact warning. This process is very verbose and I don't know if it completed successfully or not. When I query the rpm database it still shows the old version of python. Did I miss a step? > > I should mention, that if you find one that has the expat include > files, but isn't named expat-devel, you can force the build with: > > rpmbuild --rebuild --nodeps .... > > Actually, it might be easier to grab the SuSE python2 src.rpm, and > modify that one to use the new python2-2.2.3 tar source. That way, > your src.rpm will be based on the SuSE one, with all the correct > dependencies for expat, etc: > > rpm -i the-suse-python2-2.2.2.src.rpm > > cd /usr/src/redhat/SPECS > > edit python2.spec to change the version to 2.2.3 and release to > 1custom or similar. > > copy the new python2-2.2.3.tar.gz into /usr/src/redhat/SOURCES > > rpmbuild -ba /usr/src/redhat/SPECS/python2.spec > > -- > Charles R. Anderson <cra(a)wpi.edu> / http://angus.ind.wpi.edu/~cra/ > PGP Key ID: 49BB5886 > Fingerprint: EBA3 A106 7C93 FA07 8E15 3AC2 C367 A0F9 49BB 5886 > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > > >

2 1

Re: [Wlug] libcrypto.so.4
by Michael Long Aug. 7, 2003

Aug. 7, 2003

What has me concerned is that there is an expat package and it is installed on the system, but I am still getting the missing expat-devel error. The following are the results of the rpm queries: rpm -ql expat | grep include /usr/include/expat.h rpm -qa | grep expat expat-1.95.6-11 --Mike > Do you have an expat package? Most likely then the expat-devel stuff > is in the expat package. List it to see if there are any include > files: > > rpm -ql expat | grep include > > Or see if any other package mentions "expat": > > rpm -qa | grep expat > > If SuSE doesn't have any expat packages available at all, then > rebuilding one probably won't hurt. > > > -- > Charles R. Anderson <cra(a)wpi.edu> / http://angus.ind.wpi.edu/~cra/ > PGP Key ID: 49BB5886 > Fingerprint: EBA3 A106 7C93 FA07 8E15 3AC2 C367 A0F9 49BB 5886 > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > > >

1 0

Re: [Wlug] libcrypto.so.4
by Michael Long Aug. 7, 2003

Aug. 7, 2003

I have yet another question...when rebuilding the source rpm I get an error saying that I need the expat-devel libraries. My distribution either doesn't come with them or they are part of another package and I am not seeing it. If I download and rebuild the source rpm package for expat-devel from rpmfind.net what is the risk that it will break something on my system. Thanks, Mike > I am using SuSE 8.2 and I found the rpm's on rpmfind.net. The > distribution came with python 2.2.2 but I need python 2.2.3. I looked > for new SuSE packages but did not find them. I will follow your > suggestion and download the src rpm and rebuild it. > > Mike >

2 2

Re: [Wlug] libcrypto.so.4
by Michael Long Aug. 6, 2003

Aug. 6, 2003

I am using SuSE 8.2 and I found the rpm's on rpmfind.net. The distribution came with python 2.2.2 but I need python 2.2.3. I looked for new SuSE packages but did not find them. I will follow your suggestion and download the src rpm and rebuild it. Mike > > What Linux distribution and release are you using? Where did you get > those RPM packages from? You really should only use RPM packages for > your specific distribution and release. Ideally, you should use the > ones that came as a part of your distribution, if available. > > For example, Red Hat Linux 7.3 has python2 RPMs that come with it, and > newer bug-fixed ones available as errata updates > (ftp://updates.redhat.com/) > > python2-2.2.2-3.7.3.i386.rpm > python2-devel-2.2.2-3.7.3.i386.rpm > python2-docs-2.2.2-3.7.3.i386.rpm > > and Red Hat Linux 9 already has python 2 as the default: > > python-2.2.2-26.i386.rpm > python-optik-1.4-2.noarch.rpm > python-docs-2.2.2-26.i386.rpm > python-devel-2.2.2-26.i386.rpm > python-tools-2.2.2-26.i386.rpm > > If you just grabbed whatever RPM packages you could find, they are > probably not built against the proper versions of your system > libraries, which in your case are openssl and rpm. You cannot just > upgrade system libraries without breaking much of the rest of your > system. > > If you must have that particular version of python2, consider > recompiling the src.rpm so that it will be built against your exact > system library versions: > > rpmbuild --rebuild python2-2.2.3-1.src.rpm > > Then install the resulting binary rpms that are built: > > rpm -Uvh /usr/src/redhat/RPMS/i386/python2-2.2.3-1.i386.rpm > > -- > Charles R. Anderson <cra(a)wpi.edu> / http://angus.ind.wpi.edu/~cra/ > PGP Key ID: 49BB5886 > Fingerprint: EBA3 A106 7C93 FA07 8E15 3AC2 C367 A0F9 49BB 5886 > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > > >

1 0

libcrypto.so.4
by Michael Long Aug. 6, 2003

Aug. 6, 2003

Hi, I am attempting to install the rpm python2-2.2.3-1 and get the following error: edev:/home/mlong # rpm -Uvh python2-2.2.3-1.i386.rpm error: failed dependencies: libcrypto.so.4 is needed by python2-2.2.3-1 libssl.so.4 is needed by python2-2.2.3-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 is needed by python2-2.2.3-1 I then tried updating openssl-0.9.6i-12 with openssl-0.9.7a-16 and got a large list of failed dependencies. The two files I need are a part of the latest openssl package. How should I go about resolving the python dependencies? Thanks, Mike

2 1

SCO wants $699 for linux systems
by Karl Hiramoto Aug. 5, 2003

Aug. 5, 2003

http://biz.yahoo.com/prnews/030805/latu094_1.html Its on slashdot. -- ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø Karl Hiramoto <karl(a)hiramoto.org> Work: 978-425-2090 ext 25 Cell: 508-517-4819 http://karl.hiramoto.org/ AOL IM ID = KarlH420 Yahoo_IM = karl_hiramoto ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø Whether you can hear it or not, The Universe is laughing behind your back. -- National Lampoon, "Deteriorata"

1 0

Re: [Wlug] SLIPS MA Open Source Bill
by rb＠millbury.net Aug. 4, 2003

Aug. 4, 2003

At 08:26 AM 8/2/2003 -0400, you wrote: >SNIP< Further more I think It would be interesting to get involved with public schools in Worcester to promote the use of Linux. I put up a small page on my web site to address this topic, which I have called SLIPS (Supporting Linux In Public Schools). (btw.. I think the next LUG topic should include LTSP! I have this working in a vmware window using just one comp) Also an admirable goal. However, this one presents an even larger challenge. Looking at it realistically, school system educators (teachers as well as administrators) are the most stubborn, least innovative group I have ever encountered. There are exceptions in each school but to achieve adoption of anything which is not brain-dead simple to use is an impossibility. Linux is far from brain-dead simple to use. Better to concentrate on promoting business usage and then let the school systems lag behind as they always have - unless you are a glutton for punishment. Sounds like you've had some experience with the education system! <grin> As the technology administrator for the Millbury Public School District, I can concur in part. Something new is counter to the culture of many schools. We at Millbury have been using Linux on the server side for many, many years. And, thanks to Skip Gaede on this list, we also ran Mac LTSP clients in one of our libraries. Since schools are not the place for innovation <smirk>, it is difficult to get Linux on the desktop. In many instances, it isn't possible due to the lack of Linux support from most educational software manufacturer. Yes, we could run Win4Lin and all that but that defeats one of the big arguments of client software cost. It also limits and confuses most school staff members who want to evaluate software. If I say, "Can't do it, we run Linux", guess what the next comment will be. In small or specialized environments, I can see great success with infiltrating Linux. In my district, we strive to make all clients identical so that it maximizes our investment. Students can go anywhere in the school and see the same functionality. For me at the moment, putting Linux in one of the labs would limit this flexibility. Linux desktop is not out of the question for schools, just not the best choice *AT THIS TIME* for all instances. If the school is not already heavily invested in Windows curriculum software then some of the many Linux choices would be a good offering. We, for instance, use a $800/PC Windows math program to help boost our students' MCAS scores. We also require all our Sophomores to have a full year of MS Office which they also get a certificate of completion. Like everywhere else, there are politics that go along with technology decisions. Cost, along with "what are the other districts our size doing" are the two big questions you will be confronted with. I have the fortunate situation where I am allowed the freedom to make the best choice for our district. Right now, its a combination of Linux and Windows. If the situation arose that a Linux desktop would be the best choice for the user, then Linux it will be. In fact, that may not be too far off judging from the number of students I've heard of running Linux at home. If anyone else is interested in discussing this subject further, don't hesitate to contact me. I'm glad to see any enthusiasm in bringing OpenSource to schools. - Rob

1 0

SLIPS MA Open Source Bill
by Matt Higgins Aug. 4, 2003

Aug. 4, 2003

New to the list, and wanted to know what you all thought. I'm looking to put together a bill that will require state gov to consider OSS when sending out RFP's. The bill would mirror those being proposed/stalled in other states such as Washington and Texas. I have been in contact with state Rep Robert Spellane who is positive about the subject. I believe he would be more responsive if the WLUG were also supporting this. Further more I think It would be interesting to get involved with public schools in Worcester to promote the use of Linux. I put up a small page on my web site to address this topic, which I have called SLIPS (Supporting Linux In Public Schools). (btw.. I think the next LUG topic should include LTSP! I have this working in a vmware window using just one comp) Tell me your thoughts ! Matt

5 9

WLUG Meeting - Thurs. August 14th - 7PM
by Andy Stewart Aug. 3, 2003

Aug. 3, 2003

HI Everybody, I'm going to announce this meeting "early" (at least relative to most of our meeting announcements) in the hope that it will whet your Linux appetite and entice you to attend this meeting. The meeting topic will be the Linux Terminal Server Project (http://www.ltsp.org) The speaker will be your fearless leader, Andy Stewart. With the use of this software, a person can create a network of computers which uses one powerful server and any number of less powerful diskless client computers. A user would log into the client computer, and would be doing all of their work on the more powerful server transparently. Some advantages to this technique are: - maintenance is largely localized to the server - reuse of old, otherwise obsolete, equipment - security concerns are localized to the server - control over what users can access One disadvantage: - if the sever dies, everybody is dead No doubt you're asking: - how can I boot Linux on a diskless computer? - how is it that I do my work on the server? - why is system management easier with this configuration? - in what practical situation is this configuration advantageous? The answers to those questions, and many more, will be forthcoming at the meeting. I will prepare slides for the meeting which I'll put on the WLUG website afterwards. I will also walk through the many files required to setup this configuration. A live demo will be part of the meeting. To make this a bit more interesting, I'd like to ask a few people to bring in some equipment to help me (please RSVP to me to insure that we have enough of the right things): - a multisync monitor with 1024x768@72Hz capability (my spare died) - a 10/100 network hub or switch - some Ethernet cables - one or two other client machines: - could be laptops with network capability and bootable floppy - at least a P90 with 32 MB of memory, bootable floppy, video, network, etc. My hope is that we could demo 2-3 working clients off of my laptop server. I'll bring one known working client plus the server. See ya later, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

1 0

Re: [Wlug] Linksys Router
by Michael Long Aug. 2, 2003

Aug. 2, 2003

Thanks for all the feedback. I used YaST (SuSE's configuration tool) to configured the interface with a static IP and entered in the ip addresses of the dns servers that the router is using. Hopefully the dns servers have static ip's. Cheers, Mike

1 0

Linksys Router
by Michael Long Aug. 2, 2003

Aug. 2, 2003

Hi All, I have a linksys router that is acting as a dhcp server. The last firmware upgrade has change the lease time options to allow a lease to expire between 1-99999 minutes. Occasionally one of my boxes gets assigned a different IP address which invalidates the port forwarding rules. I would prefer to use static IP's but I am depending on my isp (verizon dsl) provider for their dns servers and they serve me with a dynamic address which changes reqularly. My initial thought is to write a script that checks the IP of my box and if it has changed, use links to update the port forwarding rules on the router by sending the appropriate URL to the router. Any other solutions, workarounds, hints or feedback are welcome. thanks, Mike

4 3

Next meeting - topics?
by Andy Stewart Aug. 1, 2003

Aug. 1, 2003

HI everybody, I am wondering what we should discuss at our next meeting - any ideas? I have been playing with diskless clients lately. There are a couple of ways to do this: a) load and run a Knoppix CD with no hard drive b) LTSP - Linux Terminal Server Project If people are interested, I could give a talk / demo of some basic LTSP stuff. I've got it working between a lame P90 and my laptop server. Let me know if you have other ideas, or if this idea sounds like something interesting to you. Later, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

3 3

audio application...
by Keller, Tim July 30, 2003

July 30, 2003

Hey, At the BBQ, one of our members mentioned an application that he uses for voice chat that has a linux server component. Could someone (even possibly the person who mentioned it) remind me what the name of that application is? Thanks, Tim.

2 1

RE: [Wlug] X is freezing
by Keller, Tim July 29, 2003

July 29, 2003

Baris, Are you using the nvidia driver (nv) supplied with Xfree86 or the nvidia supplied driver? Thanks, Tim. -----Original Message----- From: Baris Hasdemir [mailto:penguen@hasdemir.com] Sent: Sunday, July 27, 2003 7:58 PM To: wlug(a)mail.wlug.org Subject: Re: [Wlug] X is freezing Gregory Avedissian wrote: > I get X lockups, too. But when it happens, nothing works. No mouse, no > keys, and I don't think I get increased cpu load. Only pressing the > reset button works. I'm pretty sure it's due to a flaky power supply > that puts out low voltages sometimes, and has on occasion rebooted > itself for no apparent reason. I'll know for sure in about a week, when > the new one arrives. > let me tell some more about the frozen state. when this strange thing happens I absolutely can move the mouse pointer. but nothing reacts when moved over, or clicked on. more, when connected from another machine thorugh ssh, even if I kill the application shown on the screen, although the application is killed. (even not in Z state) it is still shown on screen as if nothing has happened. it is more like a screenshot taken before the freeze. it seems like driver problem? would you think so? thanks, baris _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

2 1

kernel choices in Debian
by Gregory Avedissian July 29, 2003

July 29, 2003

I'm planning on wiping out my SuSE 7.2 installation and trying Debian 3.0r0. The install manual says that kernel 2.2 is the default, and kernel 2.4 is an option. I can't find anywhere that says why I should choose one over the other. My SuSE is already using 2.4. Seems like it would be a step backward to install the default 2.2. Any ideas or suggestions? Thanks. Greg

3 3

X is freezing
by Baris Hasdemir July 28, 2003

July 28, 2003

Hi, When uptime reaches around three days, somehow a weird situation is happening. X usage suddenly jumps around 99% freezing the X environment. X seems to have frozen, but I can move the mouse pointer. Nothing else can be done. I log on to this machine from another one on the local area network using ssh, and reboot it for a temporary solution. If I restart only the X server, I believe it doesn't take that long to have the problem again. a total reboot gives me another 2-3 days. as soon as it freezes, connecting to this machine from the other one, I tried looking at the log files under /var/log several times. no entry has been added to xfree log in the last 10-15 minutes. and the files which have been modified in 15 minutes does not have any entries relating to the situaion, at least to my knowledge. suspecting the ram of this partially new system, I checked my rams with memtest-86-3.0. no problems are reported. suspecting the gdm, I tried without it as well. problem regenerates as usual. I don't know whether it is related but, another strange issue I am having is that: with or without gdm, sometime(not soon) after X login "alt" key starts not functioning. for example, alt+shift cannot change the keyboard layout or ctrl+alt+f{1-6} cannot take me to the consol and of course I cannot kill the X server using ctrl+alt+backspace. motherboard: Asus A7N8X cpu: AMD Athlon 2500+ video card: creative tnt2ultra 2X video driver: nvidia distro: slackware 9.0 ram: 512MB swap: 256MB Do you have any ideas? where would you think I should start from? thank you, baris

6 8

SCO is getting greedy...
by Bill Smith July 22, 2003

July 22, 2003

I got this as part of a mailing list for Information Week. I thought you would find it interesting. It's worth noting that SCO is working on THEIR SAY-SO. It is my personal opinion that any company that cowers and pays SCO just because they are using Linux is foolish. IANAL. It would be very much like some company deciding they wanted to bill you for services they didn't render. Would YOU pay that bill? If you haven't been following this story, SCO is the current owner of the Unix source code. They CLAIM that some of the System V source code made it into the Linux kernel, a claim that has not yet been substantiated. SCO has not (yet) publicly shown their "evidence". To date, the only way to see the source of their claims (no pun intended) is to sign a Non-Disclosure Agreement (NDA). Many of the people that have agreed to SCO's requirements aren't technically savvy. Most of the people that WOULD know what they were looking at are either not interested in signing anything (like an NDA), or they just don't think that SCO has a leg to stand on. SCO themselves think that most of the Linux community will laugh in their (SCO's) face. I am proud to say that I am one of the people laughing. ;) ANYWAY, here's the teaser and the link to the article: SCO Group Wants Its Money With Unix System V copyrights in hand, the vendor introduced a plan to charge those who've used Linux as an alternative to Unix for UnixWare licenses. http://update.informationweek.com/cgi-bin4/DM/y/eMu10FEZ5Z0V20B4bt0AU -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- William Smith wsmith-at-chezsmith-dot-com Fall River, MA http://www.chezsmith.com "And 1.1.81 is officially BugFree(tm), so if you receive any bug-reports on it, you know they are just evil lies." -- Linux Torvalds * TAG! v3.1 *

2 2

Re: [Wlug] Linux Redhat 7.3 Remote Boot Installation.
by Karl Hiramoto July 22, 2003

July 22, 2003

from the mirrors: http://www.redhat.com/download/mirror.html read the docs: ftp://ftp.webtrek.com/pub/mirrors/redhat/linux/9/en/doc the root of the install treee: ftp://ftp.webtrek.com/pub/mirrors/redhat/linux/9/en/os/i386 The images directory ftp://ftp.webtrek.com/pub/mirrors/redhat/linux/9/en/os/i386/images On Tue, 22 Jul 2003, Aramico wrote: > Thanks Karl, > > > But, I did not see any images directory here... > Hmm, what a day..!! > > Do you have any other detail information to release it ? > > Thanks. > > > ----- Original Message ----- > From: "Karl Hiramoto" <karl(a)zoop.org> > To: <wlug(a)mail.wlug.org> > Sent: Tuesday, July 22, 2003 5:17 PM > Subject: Re: [Wlug] Linux Redhat 7.3 Remote Boot Installation. > > > > > > under the redhat linux distro images/ directory write the bootdisk.img > > and drvnet.img to a disk. > > > > dd if=bootdisk.img of=/dev/fd0 > > dd if=drvnet.img of=/dev/fd0 > > > > boot the computer with the bootdisk, and insert the network driver > > disk when prompted. > > > > I would suggest installing redhat 9.0 versus 7.3 > > > > > > On Tue, 22 Jul 2003, Aramico wrote: > > > > > Friends, > > > > > > Can you help me that where or how can I create a bootable disk for Linux > Remote Installation ? > > > So, I can do Linux Installation using ftp, nis, or http under tcp/ip. > > > > > > > > > Thanks. > > > > > > > > > Aramico > > > > -- > > > > ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø > > Karl Hiramoto <karl(a)hiramoto.org> > > Work: 978-425-2090 ext 25 > > Cell: 508-517-4819 > > http://karl.hiramoto.org/ > > AOL IM ID = KarlH420 Yahoo_IM = karl_hiramoto > > ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø > > > > For those who like this sort of thing, this is the sort of thing they > like. > > -- Abraham Lincoln > > > > > > _______________________________________________ > > Wlug mailing list > > Wlug(a)mail.wlug.org > > http://mail.wlug.org/mailman/listinfo/wlug > > > -- ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø Karl Hiramoto <karl(a)hiramoto.org> Work: 978-425-2090 ext 25 Cell: 508-517-4819 http://karl.hiramoto.org/ AOL IM ID = KarlH420 Yahoo_IM = karl_hiramoto ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø Klingon phaser attack from front!!!!! 100% Damage to life support!!!!

1 0

Possible Linux Sysadmin Job!
by Keller, Tim July 22, 2003

July 22, 2003

Hey, A buddy of mine just dropped me a mail asking me if he knew of anybody looking for linux sysadmin job... Drop me a line and I'll send you in the right direction. Tim.

3 2

Postal Experiements
by Charles R. Anderson July 18, 2003

July 18, 2003

I mentioned this at the BBQ...you might find this funny. http://www.improb.com/airchives/paperair/volume6/v6i4/postal-6-4.html -- Charles R. Anderson <cra(a)wpi.edu> / http://angus.ind.wpi.edu/~cra/ PGP Key ID: 49BB5886 Fingerprint: EBA3 A106 7C93 FA07 8E15 3AC2 C367 A0F9 49BB 5886

3 3

RSVP for Party...
by Keller, Tim July 16, 2003

July 16, 2003

Andy, I will be attending the BBQ. Thanks, Tim.

1 0

mozilla can't find my mail
by Gregory Avedissian July 16, 2003

July 16, 2003

My filesystem got crunched, and mozilla stopped seeing all my mail messages and accounts. I tried re-installing (1.3) and it still doesn't see anything. I got this error message - error occurred reading the startup config file line 258 SyntaxError: unterminated long string literal. user_pref("mail.newsrc_root"), "home/avedis/.mozi# HTTP Cookie File I'm not clear on what or where the startup config file is. Is there an easy way to save this? I'm probably going to upgrade from SuSE 7.2 to Debian 3 in about a week, so maybe it doesn't matter. I have backup copies of all my mail files on another drive, and I hope to resurrect those after I re-install everything. Instructions for doing that might be more useful. Thanks. Greg

2 2