- WLUG - wlug.mailman3.com

Re: [Wlug] Setting up cable modem (Charter)
by Peter Gutowski June 30, 2001

June 30, 2001

On 6/30/01 3:34 PM, Thomas Carey <tcarey70(a)hotmail.com> wrote: > >I know I have seen several posts in the past, but I need a little >information on setting up my cable modem through Charter. > >A little background information; > >Red Hat 7.1 installed. > >I have two nics installed, one static (192.168.1.1 internal scheme), >one DHCP (connected to the cable modem, the cable modem when installed >by Charter was assigned 192.168.100.1). > >On boot up eth1 fails (eth1 is fine on boot up). I know I am probably >missing some configuration somewhere. I know both nic's are working >fine. After the first failed boot up (on eth1) I switched the cards, >and the static nic was fine. I'm assuming you've made a minor typing mistake in the first sentence of the previous paragraph (otherwise very confusing) I'm assuming also that you're saying that the internal card boots OK and the card hooked to the cable modem is failing: - be sure the driver module for the cable modem eth card is loaded (e.g 'insmod 3c90x' or whatever for your card ) - be sure the 'pump' package in installed > >Any ideas? If any of the above doesn't help, please give more info re: type of cards, excerpts of log files showing error messages, etc. config files, (e.g./etc/sysconfig/network-scripts/ifcfg-eth1) > >TIA > >Tom Carey >Get your FREE download of MSN Explorer at http://explorer.msn.com ><http://explorer.msn.com> >_______________________________________________ Wlug mailing list >Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

rpm problem
by Marc Hughes June 30, 2001

June 30, 2001

Having a problem with RPM... # rpm -qa |grep mozilla mozilla-0.9.1-ximian.4 nautilus-mozilla-1.0.3-ximian.3 mozilla-0.9.1-ximian.4 # rpm -e mozilla-0.9.1 error: "mozilla-0.9.1" specifies multiple packages # rpm -e mozilla-0.9.1-ximian.4 error: "mozilla-0.9.1-ximian.4" specifies multiple packages Any ideas on how I can actually remove those two identical packages that somehow got installed? (mozilla does not in fact work correctly) Thanks, -Marc

3 2

Familiar Linux help...
by Wesley Allen June 29, 2001

June 29, 2001

Hello all. I am FINALLY getting an iPaq and want to flash the ROM to install familar linux (or QT embedded). I've been looking over the howtos but I think I would feel better to have someone who's done this sitting over my shoulder so I don't make a $600 paperweight. Also, can someone tell me what apps are in ipkg format for familiar, I've been having trouble finding them? What about the possibility of switching between QT embedded and X for other useful apps (like, game boy emulators, for instance, or even the Atari Lynx...). Can anyone help me with this? Wes

1 0

RE: [Wlug] HP LH Pro...
by Keller, Tim June 29, 2001

June 29, 2001

Figured it out... Turned out that I could change the boot order on the machine, its working fine now. Tim. -----Original Message----- From: Keller, Tim [mailto:Tim.Keller@stratus.com] Sent: Friday, June 29, 2001 8:19 AM To: 'wlug(a)wlug.org' Subject: [Wlug] HP LH Pro... Probably a quick one, but neither google or I have sorted it out yet... I have a HP LH PRO with a AMI Megaraid controller in it. Connected to the controller are 2 4gig disks I've got configured to be mirrored using the hardware raid. (when doing the install you only see 1 4 gig disk) Now Mandrake 7.2 installs fine, and when using a boot floppy can see the controller etc... however when booting off of the controller, lilo comes up, it finds the kernel image and then stops at "unpacking the kernel..." I don't get any errors, it just hangs. I hooked up a regular scsi disk to one of the other Adaptec controllers but by the nature of the way the machine is layered out sda is the raid controller so the boot sector ends up on it anyway. My kernel works properly because it can access all the filesystems that reside on those disks, I just can't boot off of them. It feels like an issue with lilo... If anybody has experience with this I'd like to know what the solution would be. Thanks, Tim _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

HP LH Pro...
by Keller, Tim June 29, 2001

June 29, 2001

Probably a quick one, but neither google or I have sorted it out yet... I have a HP LH PRO with a AMI Megaraid controller in it. Connected to the controller are 2 4gig disks I've got configured to be mirrored using the hardware raid. (when doing the install you only see 1 4 gig disk) Now Mandrake 7.2 installs fine, and when using a boot floppy can see the controller etc... however when booting off of the controller, lilo comes up, it finds the kernel image and then stops at "unpacking the kernel..." I don't get any errors, it just hangs. I hooked up a regular scsi disk to one of the other Adaptec controllers but by the nature of the way the machine is layered out sda is the raid controller so the boot sector ends up on it anyway. My kernel works properly because it can access all the filesystems that reside on those disks, I just can't boot off of them. It feels like an issue with lilo... If anybody has experience with this I'd like to know what the solution would be. Thanks, Tim

1 0

Multiple IPs on one NIC
by Bill Mills-Curran June 27, 2001

June 27, 2001

I know it's possible to assign multiple IPs (at least for listening) to a single ethernet device. I _know_ I should read first and ask questions second, but I'm just _so_ lazy, and there hasn't been much traffic anyway. TIA, Bill

2 2

RE: Battlebots
by Benjamin Zack June 26, 2001

June 26, 2001

You can count me in. -Ben

1 0

Connecting USB device
by Michael Long June 26, 2001

June 26, 2001

I am running SuSE 7.0 and would like to use the USB version of SanDisk ImageMate for transfering pictures from my digital camera. When I try to mount the device I get the following: mount usbdevfs mount: usbdevfs already mounted or /proc/bus/usb busy mount: according to mtab, usbdevfs is already mounted on /proc/bus/usb I have tried to RTFM and found quite a bit of info but do not know how to pull it all together in such a way to mount my drive and get the pictures off of the CompactCard. Any hints on how to get this thing working would be a great help. Thanks, Mike

2 3

Re: [Wlug] Battlebots / Mind Rover...
by Wesley Allen June 25, 2001

June 25, 2001

Hmmm... Virtual mayhem. No blood. Manical machines? Sparks a-flying? Metal crunching? Death Match???? Count Me IN!!!!!!!!!!!!! Can I name mine HAL? BTW: I'm (finally) moving out to Westborough area. The Cape Ann LUG is pretty in active and I can't wait to get more involved in the Discussions at WLUG, you guys seem to have a good time! Wes ---------- Original Message ---------------------------------- From: "Keller, Tim" <Tim.Keller(a)stratus.com> Reply-To: wlug(a)mail.wlug.org Date: Thu, 21 Jun 2001 15:31:22 -0400 >This is very off topic, but knowing that were all nerdy types I figure I'd >get some interesting feed back. > >Loki Games just released a Linux port of a game called "Mind Rover" Marc >Hughes and myself have been having a lot of fun recently having our robots >beat the crap out of each other. > >[quick mind rover synopsis] >you pick a chassis (hovercraft, wheeled, treaded), you put your weapons and >sensors all over the chassis, you then design the logic that drives the >whole contraption. Along with the robots there are different scenarios, >such as capture the flag and maze levels. > >I was wondering how many people would be interested in starting a "Mind >Rover" competition inside wlug. If it were more than 10 people, we could >get a bulk rate on Mind Rover. > >As for the actual mechanics of running the competitions, I'd like some >input. > >Thanks for having an open ear!!! > >Tim. >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug >

1 0

new machine questions
by mike June 25, 2001

June 25, 2001

Howdy all - I'd like to replace my computer (P100) with something newer and significantly faster (but nothing bleeding edge; I'm looking for good-value speed). I'm thinking up to 1GHz (P3?). I want 16/24b color and since I've been out of it awhile I don't know anything about card makers anymore (like what's good, compatible, etc.) or if the std these days is on-board video. I've used Linux for years and want something that will allow me to get/use a scanner (first time; SCSI or USB? recommendations?) and CD-RW (recommendations). I have magazines and documents I want to scan and store on tape or CD. But what's most important is that I be able to generate some sort of index so that I can search the scanned documents (like keywords or text). What do I need for that? Can someone recommend hardware/software for this purpose? I haven't been a 'PC expert' for many years (and don't want to become one again :->) and am therefore no longer up on the latest PC technologies by way of mb, bus speeds, what's a value and what's a waste of money. Can anyone recommend hardware and someone local that sells build to order machines (no brand-names or CompUSA types)? Anything from Worcester to Shrewsbury to Marlboro to Acton to Natick, etc. Does anyone buy machines by mail and have anyone they'd recommend (or who to definitely avoid)? Thanks... Mike mhardy_mail(a)yahoo.com __________________________________________________ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/

2 1