- WLUG - wlug.mailman3.com

Reminder: Next Meeting is THURSDAY March 14th, 2019 @7PM
by Tim Keller March 13, 2019

March 13, 2019

Hey Gang, We've got a meeting on Thursday!!! I don't know how I managed to screw up the date on the subject line and then send a follow up email thinking it was already Wednesday.. Sorry about that! I blame a lack of sleep... Time/Date: March 14th, 2019 @ 7PM. Location: WPI Student Center Mid Century Room (Rm 331) Topic: Containerized applications Appimage, snaps, flatpacks... I plan to talk about what they are and what they do and compare/contrast the different technologies used to make applications distribution agnostic. Snacks and Refreshments will be provided and afterwards well head off for dinner to continue the conversation. Thanks, Tim. -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

1 0

Reminder: Meeting TOMORROW March 14th 2019 Location:
by Tim Keller March 13, 2019

March 13, 2019

Hey Gang, We've got a meeting tomorrow! I don't know how I managed to screw up the date on the subject line.. Sorry about that! Time/Date: March 14th, 2019 @ 7PM. Location: WPI Student Center Mid Century Room (Rm 331) Topic: Containerized applications Appimage, snaps, flatpacks... I plan to talk about what they are and what they do and compare/contrast the different technologies used to make applications distribution agnostic. Snacks and Refreshments will be provided and afterwards well head off for dinner to continue the conversation. Thanks, Tim. -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

3 4

Sorry...
by Tim Keller March 13, 2019

March 13, 2019

My daughter got her tonsils out and it's been a long week.. already... I seriously thought it was Wednesday... The meeting isn't tomorrow, it's Thursday... Thanks, Tim. -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

1 0

Next WLUG Meeting March 21st 2019, Topic: TBD
by Tim Keller March 12, 2019

March 12, 2019

Hey Gang, We've got a WLUG meeting on the 14th of March Location: WPI Student Center Mid Century Room (rm 331) Time: 7pm I've got a couple ideas for topics. 1. Snaps / flatpacks / appimage. These are entirely encapsulated applications that'll run on a variety of linux distributions. My new laptop runs snaps using snapd. This is just one of a bunch of new technologies for distributing software without having it tied to the machines glibc and underlying libraries. 2. Microsoft and its complicated relationship with the OSS community. Are we moving towards a dystopian future of locked and signed bootloaders? Where your only option is to run Windows 10 with the linux subsystem. Has google essentially done the same thing with Chromebook's and ChromeOS and Android? If someone has a topic that they're dying to do, let me know. As usual refreshments and snacks will be provided and afterwards we'll head off for dinner to continue the conversation. Thanks, Tim. -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

3 2

(text-based mp3 player) Anyone use mpg321/mpg123 ?
by Doug Mildram Feb. 28, 2019

Feb. 28, 2019

Not trying to prove I'm the biggest dinosaur in the zoo, but I do like TEXT windows ("Terminal",etc) and to play my saved/local mp3 files, mpg123 floats my boat ....especially to random-play-everything-from-a-file-list", or just " cd ArtistDeJour ; mpg123 * */* " or such. mpg321 is not in base Mint (nor other release's base generally) pkg list, but Mint base+3rdparty DID grab everything else it / mpg321 needed. ( pardon confusion, 321 vs 123 = all the same, if you apt-get or otherwise get "mpg321" you get the "mpg123" command.) I had it working on CentOS, with full features usable mid-stream, ( "h" would display a menu of commands like " 1,2,3,4,5,6,7,8,9,0" would jump to 10,20,.....90% portions of the track) and so on. but I dumped CentOS on my fileserver-with-sound, replaced with Mint 19.1 (which BTW solved a firefox-hangs-my-box issue) and I lost the interactive features. e.g. "h" does nothing at the moment, and when I run mpg123 I don't see the "type h for help" output I used to get. So it's just not enabled! Anyone else use this? -doug p.s. whatever Remote Control option is, that's not what the trick needed, though I don't understand it. (I stared at the args/Options below until believing I didnt need any of these flags to use the cmds listed ) But what i CAN'T show at the moment is what the interactive cmds (which "h" will list, normally) are (were until I upgraded). But I think i will reboot on the centOS partition and try. -doug =============non-human "manpage"-like help below. $ mpg321 --help High Performance MPEG 1.0/2.0/2.5 Audio Player for Layer 1, 2, and 3. Version 0.3.2-1 (2012/03/25). Written and copyrights by Joe Drew, now maintained by Nanakos Chrysostomos and others. Uses code from various people. See 'README' for more! THIS SOFTWARE COMES WITH ABSOLUTELY NO WARRANTY! USE AT YOUR OWN RISK! Usage: mpg321 [options] file(s) | URL(s) | - Options supported: --verbose or -v Increase verbosity --quiet or -q Quiet mode (no title or boilerplate) --gain N or -g N Set gain (audio volume) to N (0-100) --skip N or -k N Skip N frames into the file --frames N or -n N Play only the first N frames -o dt Set output devicetype to dt [esd,alsa(09),arts,sun,oss] --audiodevice N or -a N Use N for audio-out --stdout or -s Use stdout for audio-out --au N Use au file N for output --cdr N Use cdr file N for output --wav N or -w N Use wave file N for output --test or -t Test only; do no audio output --list N or -@ N Use playlist N as list of MP3 files --random or -Z Play files randomly until interrupted --shuffle or -z Shuffle list of files before playing --loop N or -l N Play files N times. 0 means until interrupted -R Use remote control interface -3 Restart "remote shell". Used only when in "Remote control" mode. -F Turn on FFT analysis on PCM data. Remote mode only -B Read recursively the given directories -S Report mp3 file to AudioScrobbler -K Enable Basic Keys -x Set xterm title setting -b Number of decoded frames for the output buffer -p hostname:port Use proxy server -u username:password Use proxy server basic authentication -U username:password Use proxy server basic authentication by using environment variables --aggressive Try to get higher priority --help or --longhelp Print this help screen --version or -V Print version information Basic keys: * or / Increase or decrease volume. m Mute/unmute n Skip song. This version of mpg321 has been configured with the libao default as its default libao output device.

1 0

Re: DVI Initial Resolution
by Dennis Payne Feb. 26, 2019

Feb. 26, 2019

Yes but I refuse to go backward unless I have to. xrandr is read only under Wayland. I found a simpler solution to my problem. The TV has an audio input next to the VGA input that I didn't notice. Of course I'll have to buy a VGA cable since I don't think my son will appreciate losing his monitor cable for the project. Still need to get a software interface running which doesn't need a mouse and keyboard hooked up. EmulationStation has been suggested. I plan on using open source games not emulators but it has "ports" which allows running native applications. Just have to build it under Fedora to test. On Mon, 2019-02-25 at 02:41 +0000, Krichevsky, Nicholas Jacob via WLUG wrote: > It includes both. Gnome just ships with Wayland enabled by default, > but you can change that. Not sure how xrandr works under Wayland. > > > > > From: Dennis Payne via WLUG <wlug(a)lists.wlug.org> > > Sent: Sunday, February 24, 2019 9:41 PM > > To: wlug(a)lists.wlug.org > > Cc: Dennis Payne > > Subject: [WLUG] Re: DVI Initial Resolution > > > > >  > > > Fedora uses Wayland now. I assume xrandr would no longer apply. > > > > On Mon, 2019-02-25 at 01:25 +0000, Krichevsky, Nicholas Jacob via > WLUG wrote: > > Could you set the resolution with xrandr using a systemd service? > > Using something like > > > > this seems promising. > > > > > > From: Dennis Payne via WLUG <wlug(a)lists.wlug.org> > > > > Sent: Sunday, February 24, 2019 8:23 PM > > > > To: wlug(a)lists.wlug.org > > > > Cc: Dennis Payne > > > > Subject: [WLUG] DVI Initial Resolution > > > > > > > > I've had the cub scouts build an arcade machine. The TV being used > > for > > > > display is connected by DVI. Fedora defaults to a resolution the TV > > > > does not support. If I hookup a monitor on the VGA port I can set > > the > > > > resolution of the second monitor but it switches back to an > > unsupported > > > > resolution when the second monitor is disconnected. Anyone know how > > to > > > > force a specific resolution on boot? > > > > > > > > _______________________________________________ > > WLUG mailing list -- > > > > wlug(a)lists.wlug.org > > > > > > > > To unsubscribe send an email to > > > > wlug-leave(a)lists.wlug.org > > > > > > > > > > > > > > > _______________________________________________WLUG mailing list -- > wlug(a)lists.wlug.org > To unsubscribe send an email to wlug-leave(a)lists.wlug.org

1 0

Re: DVI Initial Resolution
by Dennis Payne Feb. 25, 2019

Feb. 25, 2019

Fedora uses Wayland now. I assume xrandr would no longer apply. On Mon, 2019-02-25 at 01:25 +0000, Krichevsky, Nicholas Jacob via WLUG wrote: > Could you set the resolution with xrandr using a systemd service? > Using something like > > this seems promising. > > > > > From: Dennis Payne via WLUG <wlug(a)lists.wlug.org> > > Sent: Sunday, February 24, 2019 8:23 PM > > To: wlug(a)lists.wlug.org > > Cc: Dennis Payne > > Subject: [WLUG] DVI Initial Resolution > > > > > I've had the cub scouts build an arcade machine. The TV being used > for > > display is connected by DVI. Fedora defaults to a resolution the TV > > does not support. If I hookup a monitor on the VGA port I can set the > > resolution of the second monitor but it switches back to an > unsupported > > resolution when the second monitor is disconnected. Anyone know how > to > > force a specific resolution on boot? > > > > _______________________________________________WLUG mailing list -- > wlug(a)lists.wlug.org > To unsubscribe send an email to wlug-leave(a)lists.wlug.org

2 1

DVI Initial Resolution
by Dennis Payne Feb. 25, 2019

Feb. 25, 2019

I've had the cub scouts build an arcade machine. The TV being used for display is connected by DVI. Fedora defaults to a resolution the TV does not support. If I hookup a monitor on the VGA port I can set the resolution of the second monitor but it switches back to an unsupported resolution when the second monitor is disconnected. Anyone know how to force a specific resolution on boot? -- Dennis Payne <dulsi(a)identicalsoftware.com>

2 1

Reminder: Meeting Tomorrow (Feb. 21st) Topic: AWX Please note location!!!
by Tim Keller Feb. 20, 2019

Feb. 20, 2019

Hey Gang, This is a reminder that we've got a meeting tomorrow! Time: 7pm Date: Feb. 21st 2019 Location: Fuller Labs, Beckett Conference Room (Room 246) https://maps.wpi.edu/?id=609#!m/105273 Topic: AWX AWX is a platform for managing the automation of running ansible playbooks. My talk will include an overview of ansible / git / gitlab and AWX as they fit together as a system to manage configurations and software. For those who use puppet/chef/salt, I'm sure there will be lively comparisons. Refreshments and snacks will be provided and afterwards we'll head off (likely to the Boynton) to continue the conversation. Thanks, Tim. -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

1 0

Meeting is on Thursday!!!
by Tim Keller Feb. 20, 2019

Feb. 20, 2019

Apparently my proofreading skills were a bit off... The meeting is on THURSDAY, Feb. 21st! Thanks, Tim. -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

1 0