- WLUG - wlug.mailman3.com

Thank you for your help and.....
by Ken Jones Jan. 15, 2009

Jan. 15, 2009

Last week I was stuck. I had a broken SUN sparc64 ULTRA ONE. I asked WLUG for help. John Stoffel rose to the bait. My SUN now works better than ever. (We installed four fast ethernet ports thereby replacing a broken old fashioned eth0.) Thank you (publicly) John. I have another question. I am a retired computer programmer. I ended my professional days as a Senior Software Engineer for CISCO Systems in 2004. I am getting bored. (and my 401k is getting hit). I am curious as to whether I can contribute to an Open Source project. How do I join an open source community? Are they all parts of large corporations or schools? I just read that CISCO is embracing the open source idea. Oh course, I shall get hold of them. Do any of you have some knowledge on this subject? Ken Jones

4 3

Hyper Terminal into SUN SPARC ULTRA??
by Ken Jones Jan. 2, 2009

Jan. 2, 2009

I still have not solved how to get my AURORA LINUX package to see the added SBUS quad ethernet card in my SUN SPARC ULTRA --so---> I am after some of the files that I have stored on this SAMBA server. I figured I could use Hyper Terminal. I have an appropriate cross over cable with a 24 pin connector to plug into the SPARC's Terminal A or Terminal B. I can configure Hyper Terminal on my PC running WINDOWS XP. I am stuck figuring out how to get the SUN to activate this asynchronous interface. Any suggestions? Ken Jones (suddenly feeling very elderly)

3 2

ACM Swapmeet
by Bob Breznak Jan. 1, 2009

Jan. 1, 2009

Hey, I just wanted to remind you about the ACM Swapmeet. Its a chance to swap, buy and sell computer and other equipment and stuff. We had a great turn out last year and are expecting a similar turn out for this year. For more info go to the swapmeet site: http://acm.wpi.edu/swapmeet - Bob ------------------ Bob Breznak 908 672 2841 robert.breznak(a)gmail.com Senior Assistant for Computer Science ACM President UPE President IEEE Webmaster

1 0

Problem Sparc ULTRA 1 not seeing SBus Fast Ethernet
by Ken Jones Dec. 29, 2008

Dec. 29, 2008

I have a Sparc Ultra 1 which has been running flawlessly since 2003 running Ansel 2.4.20-2.3sparc. Last week after a nine day power outage the system no longer activates eth0, the TPE ethernet interface. I installed a --> Sun 501-5443 x1049A quad 4-port SBus Fast Ethernet card The operating system does not recognize this new hardware. This system has been running so flawlessly for at least four years that I have forgotten much of what I had learned about Aurora.(I am an elderly man by high tech standards). The little green input light corresponding to the port to which I have attached the fast ethernet cable does illuminate. Where do I start? Ken Jones

3 2

A second Aurora - SPARC question....
by Ken Jones Dec. 23, 2008

Dec. 23, 2008

Oops! I just looked inside my ULTRA SPARC ONE. The ethernet I/O appears to be embedded in the big mother board. That is not good if I am correct. Any suggestions?? Ken Jones ----- Original Message ----- From: Ken Jones To: wlug(a)mail.wlug.org Sent: Sunday, December 21, 2008 6:31 PM Subject: Aurora - SPARC question.... Folks, I've not been WLUG active for a year or more. Back then the half of my 111 gig PC disc which was dual booted with FEDORA developed a permanent error. The other half's XP installation has been OKAY. I have learned to us WINDOWS. Meanwhile my SUN ULTRA running as an Aurora SPARC SAMBA file server since 1993 has been chugging along just fine. I live in Fitchburg. We have been without power for nine days. 110 volts came up yesterday evening. Much to my chegrin my SUN was unhappy. I used a rescueCD to boot. All came back except my ethernet card. It would not start. The little light at the far end on the IP cord does not glow... --------- /etc/rc.d/init.d/network restart says, "Bringing up interface eth0: Determining IP information for eth0 ... failed. [FAILED]" The card is claimed to be a 'sunlance' card. Any ideas? Is the card fried do you think? I have a second SPARC machine. It's ethernet was working last time it was powered. Must I swap? Ken Jones

8 8

Driver for SUN SBUS ethernet card.
by Ken Jones Dec. 23, 2008

Dec. 23, 2008

My SUN ULTRA 1 has lost its eth0 card circuit. I have purchased a Sun 501-5443 X1049A Quad 4-Port SBus Fast Ethernet Card for my SUN ULTRA 1 running Aurora. The original fast ethernet circuitry is part of the SystemCard. I do not wish to replace the system card. Will I have a problem finding a driver? Ken Jones

2 1

Aurora - SPARC question....
by Ken Jones Dec. 22, 2008

Dec. 22, 2008

Folks, I've not been WLUG active for a year or more. Back then the half of my 111 gig PC disc which was dual booted with FEDORA developed a permanent error. The other half's XP installation has been OKAY. I have learned to us WINDOWS. Meanwhile my SUN ULTRA running as an Aurora SPARC SAMBA file server since 1993 has been chugging along just fine. I live in Fitchburg. We have been without power for nine days. 110 volts came up yesterday evening. Much to my chegrin my SUN was unhappy. I used a rescueCD to boot. All came back except my ethernet card. It would not start. The little light at the far end on the IP cord does not glow... --------- /etc/rc.d/init.d/network restart says, "Bringing up interface eth0: Determining IP information for eth0 ... failed. [FAILED]" The card is claimed to be a 'sunlance' card. Any ideas? Is the card fried do you think? I have a second SPARC machine. It's ethernet was working last time it was powered. Must I swap? Ken Jones

3 2

This week's meeting
by Clint Moyer Dec. 16, 2008

Dec. 16, 2008

Any topic yet?

7 8

Re: [Wlug] Wlug Digest, Vol 62, Issue 5
by Simon Kigo Dec. 14, 2008

Dec. 14, 2008

Hi I haven't used GnuCash but I hear its a great program. Has anyone used Openbravo. I just installed it on a local Ubuntu server. I would like to move the instance to an EC2 machine. Does anyone have experience with Amazon EC2 installations? I have an Ubuntu EC2 machine running but need further assistance. I Would love to hear about your experiences. --- On Sat, 12/13/08, wlug-request(a)mail.wlug.org <wlug-request(a)mail.wlug.org> wrote: From: wlug-request(a)mail.wlug.org <wlug-request(a)mail.wlug.org> Subject: Wlug Digest, Vol 62, Issue 5 To: wlug(a)mail.wlug.org Date: Saturday, December 13, 2008, 12:00 PM Send Wlug mailing list submissions to wlug(a)mail.wlug.org To subscribe or unsubscribe via the World Wide Web, visit http://mail.wlug.org/mailman/listinfo/wlug or, via email, send a message with subject or body 'help' to wlug-request(a)mail.wlug.org You can reach the person managing the list at wlug-owner(a)mail.wlug.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Wlug digest..." Today's Topics: 1. Re: Convert Quickbooks to GnuCash (Eric Martin) 2. Re: Convert Quickbooks to GnuCash (Eric Martin) ---------------------------------------------------------------------- Message: 1 Date: Sat, 13 Dec 2008 08:22:16 -0500 From: Eric Martin <freak4uxxx(a)gmail.com> Subject: Re: [Wlug] Convert Quickbooks to GnuCash To: Worcester Linux Users Group <wlug(a)mail.wlug.org> Message-ID: <4943B708.20606(a)gmail.com> Content-Type: text/plain; charset="iso-8859-1" John Stoffel wrote: > Has anyone had success in having Gnucash talk directly to the Bank > and/or Credit Card company to pull down information, and (ideally) > push transactions to the bank? > > I'm getting sick in tired of my banks web interface, mostly because > it's such a damn manual process to actually pull down the transactions > in QIF format. > > I'm thinking of moving from BoA to DCU completely, if I can make it > work. Or to another bank (within reason) to make my life simpler. > Another goal is to be able to download my Credit Card statements > automatically each time I fire up GnuCash so I can track those > > I have successfully configured GNUCash to pull down my data from discover card. Additionally, I download my data from my bank in M$ format (OFX) and it imports perfectly. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 260 bytes Desc: OpenPGP digital signature Url : http://mail.wlug.org/pipermail/wlug/attachments/20081213/ea564f38/attachmen… ------------------------------ Message: 2 Date: Sat, 13 Dec 2008 08:23:09 -0500 From: Eric Martin <freak4uxxx(a)gmail.com> Subject: Re: [Wlug] Convert Quickbooks to GnuCash To: Worcester Linux Users Group <wlug(a)mail.wlug.org> Message-ID: <4943B73D.5010407(a)gmail.com> Content-Type: text/plain; charset="us-ascii" An HTML attachment was scrubbed... URL: http://mail.wlug.org/pipermail/wlug/attachments/20081213/4631d173/attachmen… -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 260 bytes Desc: OpenPGP digital signature Url : http://mail.wlug.org/pipermail/wlug/attachments/20081213/4631d173/attachmen… ------------------------------ _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug End of Wlug Digest, Vol 62, Issue 5 ***********************************

1 0

Convert Quickbooks to GnuCash
by Michael Long Dec. 14, 2008

Dec. 14, 2008

Hi, Has anyone had a experience migrating from quickbooks to gnucash? I have been google'ing for the past couple of hours looking for solutions but have not really found one that works for me. The only one I have found requires Excel (xl2qif Excel Macro). -mike

3 8