- WLUG - wlug.mailman3.com

x86 Android VM
by dulsi＠identicalsoftware.com July 20, 2012

July 20, 2012

Has anyone played with the x86 android images? I've tried running it under kvm but can't seem to get networking to work. I tried 4.0 rc1 a while ago. Looks like I may have found my answers on the release notes. It says ethernet doesn't work. Looks like 2.2 is the last version with working ethernet. That's disappointing. Dennis Payne dulsi(a)identicalsoftware.com

1 0

WLUG july/aug
by Doug Mildram July 12, 2012

July 12, 2012

doug> Chuck is on vacation...hope the website didn't mislead; it said "TBD" for upcoming meetings. ** So I think we're "on break" for July, and still hoping for a new August BBQ volunteer host. Or, I might. From: John Platt <jplatt39(a)gmail.com> Subject: [Wlug] July meeting? Hi! I was on campus this evening but didn't see Chuck or any signs. Did I miss something?

1 0

July meeting?
by John Platt July 12, 2012

July 12, 2012

Hi! I was on campus this evening but didn't see Chuck or any signs. Did I miss something?

1 0

Need keysym code of the FN key -- how?
by E Johnson July 4, 2012

July 4, 2012

Hi guys, I finally got a new keyboard after muddling along with my supernice one that was rapidly dying. Many errors, repeating keys, skips; cable had to be exactly the right angle; lights went out, etc. It needs rewiring. A soldering iron is on its way, whenever the lender can drop it off here, which clearly will not be today. Meanwhile the new one is almost okay, even if it is plastic. This is a Perixx PERIBOARD-502 PLUS, Wired USB Keyboard with Touchpad. BUT -- it has one serious fault. On this keyboard, the outboard key on the lower left side is FN but it needs to be CTRL. The CTRL key is in the wrong place. I use this key hundreds of times/day. So I need to remap this key to be the CTRL key. I can run xev to get the keymap codes, for all keys but this FN key. Apparently the FN key won't give any output by itself, at least not using this method. Without the code, I can't xmodmap this key. I need output like this: KeyRelease event, serial 34, synthetic NO, window 0x4600001, root 0x111, subw 0x0, time 1003909681, (508,-351), root:(512,327), state 0x4, keycode 37 (keysym 0xffe3, Control_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False -- where the part in parentheses after keysym contains the code I need. The manufacturer said they would check with their R&D, but it might take several days. Some solutions to issues like these say this can be done in the BIOS, but there's no guarantee, and I don't want to mess with the BIOS anyway. Is there another way I can find the keymap code for this key? Some keep-it-simple method that won't fry my overheated brain? Thanks very much, Liz J

3 6

RFC: WLUG BBQ July/August timeframe
by Chuck Anderson June 23, 2012

June 23, 2012

We usually have a WLUG summer BBQ around July or August, so I'd like to get the planning discussion going now. Are people interested in having a BBQ this year, and if so, would someone be willing to host it? WLUG should enough in the bank to fund the food, so all we need is a place with a BBQ grill and a time. Comments? Ideas? Chuck

2 1

Re: [Wlug] OPENING - Mid to Sr level SW Engineer - Linux, C++
by John Spencer June 18, 2012

June 18, 2012

I hope I did not insult anyone by asking for a Word resume for a "Linux" position, certainly not my intention. I get a lot of PDF's and my DB does not accept PDFs. At least I know you were reading my posting :) As I stated in my email, I will never send your resume anywhere without talking to you first. Please feel free to pass this opening along to your network Regards, John Spencer Connected Systems Partners Connecting Top Talent with Top Companies 978-455-5550 x208 978-621-9743 cell jspencer(a)connectedsp.com www.connectedsp.com<www.connectedsp.com%20> GET CONNECTED! Unless otherwise explicitly instructed by sender, all information in this email is considered confidential and intended for the view and use of the recipient(s) only.

1 0

OPENING - Mid to Sr level SW Engineer - Linux, C++
by John Spencer June 18, 2012

June 18, 2012

We are seeking a Mid to Sr level Software Engineer to be responsible for software design and development solutions. This is a perm position north of Boston. Responsible for Software Development Life Cycle including design, development, integration and test " Demonstrable ability to communicate complex concepts verbally and in writing " Responsible for major portions of software projects. " Write system design and specifications " Development in accordance with design requirements " Perform software verification procedures and document results " Generate software release Skills & Experience " BSCS or related technical degree " 4+ years of strong C++ and Linux " Strong Object Oriented Design experience " Background with multi-threading and Boost libraries " Experience with software design patterns " Ability to work with vendors, customers and other engineering groups " Experience with medical devices or experience in a regulated industry " Strong written and verbal communication skills Please send a Word version of your resume with any questions. Please Note, your resume will not be sent anywhere without your prior approval. Regards, John Spencer Connected Systems Partners Connecting Top Talent with Top Companies 978-455-5550 x208 978-621-9743 cell jspencer(a)connectedsp.com www.connectedsp.com<www.connectedsp.com%20> GET CONNECTED! Unless otherwise explicitly instructed by sender, all information in this email is considered confidential and intended for the view and use of the recipient(s) only.

4 3

looking to join the local linux community
by Wolf Bronski June 18, 2012

June 18, 2012

Hello, My name is Rich. I've been using Ubuntu and CentOS for a while now. I'm into servers and I'm interested in documentation. I'd very much like to come to the next meeting as I live very close to WPI. I've written a guide about running a Redmine server on CentOS 6.2. It's not complete because i want to add other repositories like Git and SVN besides Mercurial (hg). You can download it at http://107.22.171.253/hg/test/file/fb531026ab76 I've written it in DocBook but there is also a PDF in the repo. Please email me if you wish. Have a great day.

1 0

Announce: WLUG Meeting Wed 6/13 7PM: Secure Virtual Containers/Multi-Tenancy
by Chuck Anderson June 13, 2012

June 13, 2012

Hi folks, The next Worcester Linux Users' Group (WLUG) monthly meeting will be held next Wednesday, June 13, at 7PM. The location will be the WPI Campus Center, Chairman's Room (room 129). Wednesday, June 13, 7:00 - 9:00 PM WPI Campus Center, Chairman's Room (room 129) Dan Walsh of Red Hat will be giving a presentation on Secure Virtual Containers/Multi-Tenancy: "During the Last few years as computers have become more powerful, there has been a move towards server computing. Most people call this "Cloud" computing. One key feature of this is moving servers out of the data center and onto virtual machines. My presentation will describe this as Multitenancy.. This talk will cover technologies from RHEL5, RHEL6 and RHEL7. SELinux, Virtualization, Sandbox and Secure Container Applications." Afterwards, we will go out for pizza and continue our discussions. See you there, Chuck President, Worcester Linux Users' Group

1 1

USB disconnect; problem with keyboard being disconnected
by E Johnson May 27, 2012

May 27, 2012

We have a problem here with keyboard being disconnected many times/day. If I unplug the USB connector, then plug it in again, this works some of the time, but not always. If re-plugging it in does not work, then if I plug in the keyboard at a different port, it sometimes starts working again, but not always. The front USB ports seem a little stretched out; sometimes wiggling the connector temporarily fixes the problem, but not always. The back USB connectors seem nice & snug, but the problem does also happen when plugged in back there. This is output of lsusb: Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 007: ID 046d:c062 Logitech, Inc. Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 047f:c002 Plantronics, Inc. Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 085: ID 0566:3013 Monterey International Corp. Bus 006 Device 084: ID 0566:3020 Monterey International Corp. Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub The keyboard is the Monterey thing, why it's in there two times I have no clue. Sometimes the keyboard works normally for many days, then this disconnecting problem crops again, seemingly random. I can't identify a specific reason why this starts happening, or stops happening. But it's becoming more frequent now. I am not finding a solution in the forums (or maybe I am not searching with the right terms). I am getting zillions of repetitive error messages, a small sample of which is pasted here below. I had these same kind of messages since several years ago, on a different computer (different processor, mobo, case, mouse, keyboard & all) running an earlier version of my OS (Debian). I get similar messages here in a different computer, different keyboard & mouse, running Debian Squeeze. This computer is running Debian Lenny. It is soon to be retired since I just built a brand-new one, but can't retire it until I migrate a whole lot of files to the new one & do some tweaking & installing various apps. Hope someone here has run across this issue & has found a way to solve it. I can't crawl under the table umpteen times/day to plug in a USB cable. Very frustratiing problem. Sample of error messages is below here. Ideas, suggestions would be greatly appreciated. Thanks very much, Liz J May 26 09:18:42 leonardo kernel: [3110102.417306] usb 6-2: USB disconnect, address 27 May 26 09:18:42 leonardo kernel: [3110102.417306] usb 6-2.3: USB disconnect, address 28 May 26 09:18:42 leonardo kernel: [3110102.749302] usb 6-2: new high speed USB device using ehci_hcd and address 29 May 26 09:18:42 leonardo kernel: [3110102.901315] usb 6-2: configuration #1 chosen from 1 choice May 26 09:18:42 leonardo kernel: [3110102.901315] hub 6-2:1.0: USB hub found May 26 09:18:42 leonardo kernel: [3110102.901315] hub 6-2:1.0: 3 ports detected May 26 09:18:42 leonardo kernel: [3110103.009359] usb 6-2: New USB device found, idVendor=0566, idProduct=3020 May 26 09:18:42 leonardo kernel: [3110103.009359] usb 6-2: New USB device strings: Mfr=10, Product=11, SerialNumber=0 May 26 09:18:42 leonardo kernel: [3110103.009359] usb 6-2: Product: USB 2.0 HUB May 26 09:18:42 leonardo kernel: [3110103.009359] usb 6-2: Manufacturer: GENESYS May 26 09:18:43 leonardo kernel: [3110103.225358] usb 6-2.3: new low speed USB device using ehci_hcd and address 30 May 26 09:18:43 leonardo kernel: [3110103.337358] usb 6-2.3: configuration #1 chosen from 1 choice May 26 09:18:43 leonardo kernel: [3110103.345360] input: HID 0566:3013 as /class/input/input2619 May 26 09:18:43 leonardo kernel: [3110103.385357] input,hidraw2: USB HID v1.10 Keyboard [HID 0566:3013] on usb-0000:00:13.2-2.3 May 26 09:18:43 leonardo kernel: [3110103.393363] input: HID 0566:3013 as /class/input/input2620 May 26 09:18:43 leonardo kernel: [3110103.437358] input,hiddev97,hidraw3: USB HID v1.10 Device [HID 0566:3013] on usb-0000:00:13.2-2.3 May 26 09:18:43 leonardo kernel: [3110103.437358] usb 6-2.3: New USB device found, idVendor=0566, idProduct=3013 May 26 09:18:43 leonardo kernel: [3110103.437358] usb 6-2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 May 26 09:18:47 leonardo kernel: [3110107.977546] usb 6-2: USB disconnect, address 29 May 26 09:18:47 leonardo kernel: [3110107.977546] usb 6-2.3: USB disconnect, address 30 May 26 09:18:48 leonardo kernel: [3110108.269231] usb 6-2: new high speed USB device using ehci_hcd and address 31 May 26 09:18:48 leonardo kernel: [3110108.417539] usb 6-2: configuration #1 chosen from 1 choice May 26 09:18:48 leonardo kernel: [3110108.421222] hub 6-2:1.0: USB hub found May 26 09:18:48 leonardo kernel: [3110108.421222] hub 6-2:1.0: 3 ports detected May 26 09:18:48 leonardo kernel: [3110108.529223] usb 6-2: New USB device found, idVendor=0566, idProduct=3020 May 26 09:18:48 leonardo kernel: [3110108.529223] usb 6-2: New USB device strings: Mfr=10, Product=11, SerialNumber=0 May 26 09:18:48 leonardo kernel: [3110108.529223] usb 6-2: Product: USB 2.0 HUB May 26 09:18:48 leonardo kernel: [3110108.529223] usb 6-2: Manufacturer: GENESYS May 26 09:18:48 leonardo kernel: [3110108.749082] usb 6-2.3: new low speed USB device using ehci_hcd and address 32 May 26 09:18:48 leonardo kernel: [3110108.845832] usb 6-2.3: configuration #1 chosen from 1 choice May 26 09:18:48 leonardo kernel: [3110108.852599] input: HID 0566:3013 as /class/input/input2621 May 26 09:18:48 leonardo kernel: [3110108.904715] input,hidraw2: USB HID v1.10 Keyboard [HID 0566:3013] on usb-0000:00:13.2-2.3 May 26 09:18:48 leonardo kernel: [3110108.913547] input: HID 0566:3013 as /class/input/input2622 May 26 09:18:48 leonardo kernel: [3110108.929554] input,hiddev97,hidraw3: USB HID v1.10 Device [HID 0566:3013] on usb-0000:00:13.2-2.3 May 26 09:18:48 leonardo kernel: [3110108.929554] usb 6-2.3: New USB device found, idVendor=0566, idProduct=3013 May 26 09:18:48 leonardo kernel: [3110108.929554] usb 6-2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0

2 4