- WLUG - wlug.mailman3.com

Re: [Wlug] video from Identity Management, FreeIPA, and Kerberos talk
by Tim Keller April 5, 2017

April 5, 2017

Nice!!! On Wed, Apr 5, 2017 at 4:07 PM, Chuck Anderson <cra(a)wpi.edu> wrote: > It only took me a year and a half, but I finally was able to get the > 27gig AVCHD files from the video camera converted to a usable video > file format. Please find the video (and slides) here: > > http://www.wlug.org/ > > December 10, 2015 - Dmitri Pal, Red Hat, Inc. - Identity Management, > FreeIPA, and Kerberos (slides) (video) > > Direct links: > > http://www.wlug.org/files/Identity%20Management%20for% > 20Modern%20Infrastructure%20(WPI)%20low.mp4 > > http://www.wlug.org/files/Identity%20Management%20for% > 20Modern%20Infrastructure%20(WPI).pdf > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

1 0

video from Identity Management, FreeIPA, and Kerberos talk
by Chuck Anderson April 5, 2017

April 5, 2017

It only took me a year and a half, but I finally was able to get the 27gig AVCHD files from the video camera converted to a usable video file format. Please find the video (and slides) here: http://www.wlug.org/ December 10, 2015 - Dmitri Pal, Red Hat, Inc. - Identity Management, FreeIPA, and Kerberos (slides) (video) Direct links: http://www.wlug.org/files/Identity%20Management%20for%20Modern%20Infrastruc… http://www.wlug.org/files/Identity%20Management%20for%20Modern%20Infrastruc…

1 0

Ideas for next meeting (April 13th)
by Tim Keller April 4, 2017

April 4, 2017

Hey Gang, A couple of ideas have been bandied about for the next meeting. 1. A round table discussion regarding internet security. 2. glusterfs. This is a distributed clustering filesystem that lets you tie a bunch of systems into a single cohesive filesystem. 3. ? If people have ideas, I'd love to hear them. I made a list at the last meeting but I don't have it on me... Thanks, Tim. -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

1 0

Re: [Wlug] (no subject)
by Tim Keller March 29, 2017

March 29, 2017

Lustre solves the problem by getting out of the way. The metadata server simply tells the client on which of the nodes the pieces of the file resides. Reading the documentation, when it comes to Lustre, split brain can't happen because the moment any of the meta controllers go offline, the whole thing stops. Definitely with ZFS if you don't start with a plan you're going to have a bad day. The current design for a node is a 1U HP DL360G7 server with ~144 or 288GB of ram. Internal storage is handled by the smart array controller. The next one I build I think I'm going to buy a 9200-8i and route the cables so that all the internal and external storage is JBOD. My current HBA card dejour for external storage is the LSI 9200-8e. As for external JBOD enclosures, there are LOTS of choices. Generally I've stuck with the promise J610s. It's essentially the "expansion" cabinet for a "smart" promise array. It's beauty is in it's abject stupidity. As for drives, currently all my stuff is running 4TB Seagate SAS drives. For "mainline" nodes, I configure them as raid10 pools. This gets me ~29TB of storage per pool For "backup" nodes, I configure them as raidz2 pools. All my backup nodes are 32 disk boxes so the pools are 116TB. Obviously this design is a balance between cost and performance. If I need more slots I'll use a 380 instead of 360 and I'll stick in an Intel X540-T2 10GigE card. It's fun to imagine if you scaled up the disks and the interconnects what a filesystem would look like. Tim. On Tue, Mar 28, 2017 at 8:45 PM, John Stoffel <john(a)stoffel.org> wrote: > > Tim> My first experiment was simply setting up a distributed volume > Tim> that needs to have each of the "bricks" as they refer to them as > Tim> being reliable members. > > Nice. > > Tim> However you can configure it to mirror and strip across the > Tim> "bricks" so they don't have to be. In fact you can setup > Tim> stripped mirrors, etc. > > That would be safer for sure. I can just see a network problem taking > down a bunch of bricks and leading to a split-brain situation if > you're not careful. > > Tim> I've now got a number of these storage nodes as I call them. It > Tim> generally consists of a 1U box, stuffed full of ram, connected to > Tim> a JBOD chassis full of disks. I then use ZFS to create storage > Tim> pools. > > So I used to like ZFS and think it was "da bomb" but after using it > for several years, and esp after using the ZFS appliances from > Sun/Oracle, I'm not really enamored of the entire design any more. > > I think they have some great ideas in terms of checksumming all the > files and metadata. But the layering (or lack of) disks/devices > inside zpools just drives me nuts. It's just really inflexible and > can get you in trouble if you're not careful. > > Tim> The problem with this is that your scale is limited to the size > Tim> of a single "node" and while you can play games with autofs it's > Tim> not a cohesive filesystem. > > Can you give some more details of your setup? > > Tim> This solves that problem. My only complaint is that it's fuse based. > > Yeah, not really high performance at the end of the day. > > Tim> Lustre is a kernel loaded filesystem that'll do the same thing as > Tim> gluster. However, it doesn't have any of the redunancy stuff, > Tim> it simply assumes your underlying storage is reliable. > > This is the key/kicker for all these systems. > > I'm waiting for someone to come up with an opensource sharding system > where you use erasure codes for low-level block storage so that you > have alot of the RAID6 advantages, but even more reliability AND > speed. But it's also a hard hard problem space to get right. > > Thanks for sharing! > John > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

1 0

Re: [Wlug] (no subject)
by John Stoffel March 29, 2017

March 29, 2017

Tim> My first experiment was simply setting up a distributed volume Tim> that needs to have each of the "bricks" as they refer to them as Tim> being reliable members. Nice. Tim> However you can configure it to mirror and strip across the Tim> "bricks" so they don't have to be. In fact you can setup Tim> stripped mirrors, etc. That would be safer for sure. I can just see a network problem taking down a bunch of bricks and leading to a split-brain situation if you're not careful. Tim> I've now got a number of these storage nodes as I call them. It Tim> generally consists of a 1U box, stuffed full of ram, connected to Tim> a JBOD chassis full of disks. I then use ZFS to create storage Tim> pools. So I used to like ZFS and think it was "da bomb" but after using it for several years, and esp after using the ZFS appliances from Sun/Oracle, I'm not really enamored of the entire design any more. I think they have some great ideas in terms of checksumming all the files and metadata. But the layering (or lack of) disks/devices inside zpools just drives me nuts. It's just really inflexible and can get you in trouble if you're not careful. Tim> The problem with this is that your scale is limited to the size Tim> of a single "node" and while you can play games with autofs it's Tim> not a cohesive filesystem. Can you give some more details of your setup? Tim> This solves that problem. My only complaint is that it's fuse based. Yeah, not really high performance at the end of the day. Tim> Lustre is a kernel loaded filesystem that'll do the same thing as Tim> gluster. However, it doesn't have any of the redunancy stuff, Tim> it simply assumes your underlying storage is reliable. This is the key/kicker for all these systems. I'm waiting for someone to come up with an opensource sharding system where you use erasure codes for low-level block storage so that you have alot of the RAID6 advantages, but even more reliability AND speed. But it's also a hard hard problem space to get right. Thanks for sharing! John

1 0

Re: [Wlug] (no subject)
by Tim Keller March 28, 2017

March 28, 2017

My first experiment was simply setting up a distributed volume that needs to have each of the "bricks" as they refer to them as being reliable members. However you can configure it to mirror and strip across the "bricks" so they don't have to be. In fact you can setup stripped mirrors, etc. I've now got a number of these storage nodes as I call them. It generally consists of a 1U box, stuffed full of ram, connected to a JBOD chassis full of disks. I then use ZFS to create storage pools. The problem with this is that your scale is limited to the size of a single "node" and while you can play games with autofs it's not a cohesive filesystem. This solves that problem. My only complaint is that it's fuse based. Lustre is a kernel loaded filesystem that'll do the same thing as gluster. However, it doesn't have any of the redunancy stuff, it simply assumes your underlying storage is reliable. Tim. On Tue, Mar 28, 2017 at 11:08 AM, John Stoffel <john(a)stoffel.org> wrote: > > Tim> The subject for that was supposed to be "Fun with glusterfs" > Tim> On Tue, Mar 28, 2017 at 10:51 AM, Tim Keller <turbofx(a)gmail.com> > wrote: > > Tim> I've been messing around with "glusterfs" and it's pretty cool. > > Tim> I build 3 machine running RHEL7.2 each with an extra 250GB disk. > > Tim> I then setup a filesystem that stripes across all three machines. > > Tim> So it looks like a single 750GB filesystem. Over gigE I'm seeing > okay > Tim> performance ~50MB/s. > > Tim> Cool stuff. Next on my list of filesystems to play with it > Lustre. > > Sounds neat. Does glusterfs support RAID5/6 or does it depend on the > underlying nodes to be reliable? > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

1 0

Re: [Wlug] (no subject)
by John Stoffel March 28, 2017

March 28, 2017

Tim> The subject for that was supposed to be "Fun with glusterfs" Tim> On Tue, Mar 28, 2017 at 10:51 AM, Tim Keller <turbofx(a)gmail.com> wrote: Tim> I've been messing around with "glusterfs" and it's pretty cool. Tim> I build 3 machine running RHEL7.2 each with an extra 250GB disk. Tim> I then setup a filesystem that stripes across all three machines. Tim> So it looks like a single 750GB filesystem. Over gigE I'm seeing okay Tim> performance ~50MB/s. Tim> Cool stuff. Next on my list of filesystems to play with it Lustre. Sounds neat. Does glusterfs support RAID5/6 or does it depend on the underlying nodes to be reliable?

1 0

(no subject)
by Tim Keller March 28, 2017

March 28, 2017

I've been messing around with "glusterfs" and it's pretty cool. I build 3 machine running RHEL7.2 each with an extra 250GB disk. I then setup a filesystem that stripes across all three machines. So it looks like a single 750GB filesystem. Over gigE I'm seeing okay performance ~50MB/s. Cool stuff. Next on my list of filesystems to play with it Lustre. Tim. -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

1 1

Re: [Wlug] awk help
by Mike Peckar March 15, 2017

March 15, 2017

Nathan’s solution worked, thanks to all for the replies. I do feel better this was not a solution that could fit into a tweet. Theo’s is elegant, but there are spaces in the data, and John’s would have work, but I can’t use perl in the environment I’m working in. Mike awk -F, '{linecount[$3]++;tmp=dup[$3];if(length(tmp)==0){dup[$3]=$0}else{dup[$3]=dup[$3]"\n"$0}} END {for (count in linecount){if(linecount[count]>1){print dup[count]}}}' Hopefully this is not a homework problem. On Mon, Mar 13, 2017 at 7:20 PM, Mike Peckar <fog(a)fognet.com> wrote: Hey now, folks, This seemed like it should be simple, but I’m at wits end. I simply want to find duplicates in the third column of a csv file, and output the duplicate line _and_ the original line that matched it. There’s a million examples out there that will output just the duplicate but not both. In the data below, I’m looking for lines that match in the 3rd column… Normal,Server,xldspntc02,,10.33.52.185, Normal,Server,xldspntc02,,10.33.52.186, Normal,Server,xldspntc04,,10.33.52.187, Normal,Server,xldspntcs01,10.33.16.198, Normal,Server,xldspntcs01,,10.33.16.199, Normal,Server,xldsps01,10.33.16.162, Normal,Server,xldsps02,10.33.16.163, My desired output would be: Normal,Server,xldspntc02,,10.33.52.185, Normal,Server,xldspntc02,,10.33.52.186, Normal,Server,xldspntcs01,10.33.16.198, Normal,Server,xldspntcs01,,10.33.16.199, $ awk -F, 'dup[$3]++' file.csv I played around with the prev variable, but could not pumb it out fully, e.g { print prev } Mike _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug -- Nathan Panike

1 0

Re: [Wlug] awk help
by John Stoffel March 15, 2017

March 15, 2017

>>>>> "Theo" == Theo Van Dinter <felicity(a)kluge.net> writes: Theo> Assuming there's no spaces in the csv, you could do: Theo> awk -F, '{print $0,$3}' | sort -k2 | uniq -D -f 1 | awk '{print $1}' Nice use of 'uniq -f 1' to re-read the file and do the de-duping. Theo> $ cat 1 Theo> Normal,Server,xldspntcs01,10.33.16.198, Theo> Normal,Server,xldspntc02,,10.33.52.185, Theo> Normal,Server,xldsps01,10.33.16.162, Theo> Normal,Server,xldspntc04,,10.33.52.187, Theo> Normal,Server,xldspntcs01,,10.33.16.199, Theo> Normal,Server,xldsps02,10.33.16.163, Theo> Normal,Server,xldspntc02,,10.33.52.186, Theo> $ cat 1 | awk -F, '{print $0,$3}' | sort -k2 | uniq -D -f 1 | awk '{print $1}' Theo> Normal,Server,xldspntc02,,10.33.52.185, Theo> Normal,Server,xldspntc02,,10.33.52.186, Theo> Normal,Server,xldspntcs01,,10.33.16.199, Theo> Normal,Server,xldspntcs01,10.33.16.198, Theo> On Mon, Mar 13, 2017 at 7:20 PM, Mike Peckar <fog(a)fognet.com> wrote: Theo> Hey now, folks, Theo> Theo> This seemed like it should be simple, but I’m at wits end. I simply Theo> want to find duplicates in the third column of a csv file, and output Theo> the duplicate line _and_ the original line that matched it. There’s a Theo> million examples out there that will output just the duplicate but not Theo> both. Theo> Theo> In the data below, I’m looking for lines that match in the 3^rd column… Theo> Theo> Normal,Server,xldspntc02,,10.33.52.185, Theo> Normal,Server,xldspntc02,,10.33.52.186, Theo> Normal,Server,xldspntc04,,10.33.52.187, Theo> Normal,Server,xldspntcs01,10.33.16.198, Theo> Normal,Server,xldspntcs01,,10.33.16.199, Theo> Normal,Server,xldsps01,10.33.16.162, Theo> Normal,Server,xldsps02,10.33.16.163, Theo> Theo> My desired output would be: Theo> Theo> Normal,Server,xldspntc02,,10.33.52.185, Theo> Normal,Server,xldspntc02,,10.33.52.186, Theo> Normal,Server,xldspntcs01,10.33.16.198, Theo> Normal,Server,xldspntcs01,,10.33.16.199, Theo> Theo> $ awk -F, 'dup[$3]++' file.csv Theo> Theo> I played around with the prev variable, but could not pumb it out Theo> fully, e.g { print prev } Theo> Theo> Mike Theo> _______________________________________________ Theo> Wlug mailing list Theo> Wlug(a)mail.wlug.org Theo> http://mail.wlug.org/mailman/listinfo/wlug Theo> _______________________________________________ Theo> Wlug mailing list Theo> Wlug(a)mail.wlug.org Theo> http://mail.wlug.org/mailman/listinfo/wlug

1 0