- WLUG - wlug.mailman3.com

ssh2 -> openssh
by Bill Mills-Curran 05 Jun '01

05 Jun '01

Tonight I tried (briefly) to convert to openssh from ssh2, and I ran into trouble. Maybe someone has an idea. The two machines in question are at RedHat 6.1 and RedHat 7.0. I built ssh2 (version 2.4.0) on each machine, and the install went smoothly on both sides. I have been happy with it. Then a friend suggested openssh. So I thought I'd try to convert. Since I could not find a ready-build openssl and openssh rpm for 6.1, I build openssh 2.9p1 and openssl 0l.6.6a. On my 7.0 box, I used the rpm's from the distro. I deinstalled the ssh2 code using "make install". I did not try to remove any other files, but I did stop all ssh2 processes. The install of the openssh code went just fine. I could log into my 7.0 box from my 6.1 box (I can't go the other way due to a company firewall), but the port mapping did not work. (I used the "-R 19999:box1:23" to give me access back through the company firewall.) I'm wondering if I'm running into basic code problems, or is it likely that the ssh2 installation needs some careful manual cleanup prior to decommission it. I'm back running ssh2, but I'd like to stick with open source, if possible. Suggestions? Thanks, Bill

3 2

DVD RAM
by Andy Stewart 04 Jun '01

04 Jun '01

HI gang, I saw a note on SuSE's website advertising their upcoming release of version 7.2 In that press release, they boasted about supporting the new Panasonic DVD RAM drive (LF-D291), which supports writing 9.6 GB on a two sided medium. I know that reading a DVD is supported on recent (2.4.x) kernels, and also on some later 2.2.x kernels, and that patches exist for earlier 2.2.x kernels. (Data mode, like a giant CD...not DVD video). What I would like to know is: what is required of Linux to support writing a DVD RAM device. Do I need a program analogous to xcdroast? I have searched quite a bit and cannot find this tidbit of information. I am considering this for a backup solution first, a data DVD reader second (SuSE distributes their stuff on DVD), and DVD video lastly (www.linuxvideo.org) Later, Andy -- Andy Stewart Founder Worcester Linux Users' Group Worcester, MA, USA http://www.wlug.org

2 1

RE: [Wlug] dual PII/PIII motherboard of questionable origin up fo r grabs
by Keller, Tim 04 Jun '01

04 Jun '01

That sounds like a raffle item to me! Tim. -----Original Message----- From: Brian J. Conway [mailto:dogbert@clue4all.net] Sent: Monday, June 04, 2001 3:29 PM To: wlug(a)wlug.org Subject: [Wlug] dual PII/PIII motherboard of questionable origin up for grabs The WPI Linux Association received a donation of a SuperMicro SUPER P6DBE dual PII/PIII 440BX motherboard (http://www.supermicro.com/PRODUCT/MotherBoards/440BX/p6dbe.htm) The original owner upgraded because it was flaky and thought the parallel port was bad, but upon buying a new motherboard found that it was his fubared sound card causing flakiness, so I'm under the assumption that this motherboard should be good or at least workable, but of course there are NO GUARANTEES. As we currently have no use for it and I'd hate to see it go to waste, get back to me if you'd like it, but please only do so if you'll put it to good use, I'd hate to see something like this go to waste. I'll bring it to the next WLUG meeting to hand off. Brian J. Conway dogbert(a)clue4all.net Geek for hire: http://clue4all.net/resume Power Mac G4 Cube. Some of us are getting laid tonight. (http://www.pvponline.com/archive.php3?archive=20010509) P.S. I'm also told the screen at POST looks a little garbled, but that's due to the latest BIOS update and performance should be unaffected. _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

Fwd: WLUG - Borland Kylix
by Andy Stewart 03 Jun '01

03 Jun '01

---------- Forwarded Message ---------- Subject: WLUG - Borland Kylix Date: Fri, 1 Jun 2001 14:53:15 -0400 From: "Al Reinhart" <reinhart(a)discom.com> To: <astewart(a)world.std.com> Andy, Thought some of the members in the user group might be interested in the following: Borland announces a 90-day limited time offer to purchase the Desktop edition of Borland® Kylix(TM), its award-winning Linux® application development and deployment product for $199. Timed with the launch of "Kylix-Compatible" Borland® Delphi(TM) 6, the promotion is designed to address the demand for Windows/Linux cross-platform application development and deployment... (http://www.borland.com/about/press/2001/kylix_promo.html) Al ------------------------------------------ Al Reinhart Phone: (508) 869-6417 DisCom Systems Fax: (508) 869-3420 www.DisCom.com ------------------------------------------------------- -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

4 3

Linux on a Dell laptop dual-boot W2K
by Simoncini, Matthew 01 Jun '01

01 Jun '01

Hey all, I was wondering if anyone has had any "good" experiences installing Linux and W2K on the same machine? I currently have the following hardware setup: Dell Inspiron 8000 Laptop Pentium III 700mhz w/256MB RAM Toshiba DVD-ROM Integrated Actiontec 10/100MB NIC \ 56K Modem Intel® 815e AGPSet Chipset with 4X AGP 10GB HD - currently 1 partition NTFS file system My thoughts were to install Caldera e-Desktop 2.4 which I have had some success with. What I'm not sure about is re-partitioning the HD to accommodate 2 Operating Systems. Caldera comes with a slim version of Partition Magic, but I haven't had the opportunity to use it on NTFS, so that is where any suggestions would help. Thanks for the time. Matthew

3 2

Re: [Wlug] Linux on a Dell laptop dual-boot W2K
by Wesley Allen 01 Jun '01

01 Jun '01

---------- Original Message ---------------------------------- From: "Simoncini, Matthew" <simoncim(a)bsci.com> Reply-To: wlug(a)mail.wlug.org Date: Thu, 31 May 2001 15:23:29 -0400 >Hey all, > >I was wondering if anyone has had any "good" experiences installing Linux >and W2K on the same machine? I currently have the following hardware setup: > >Dell Inspiron 8000 Laptop >Pentium III 700mhz w/256MB RAM >Toshiba DVD-ROM >Integrated Actiontec 10/100MB NIC \ 56K Modem >Intel® 815e AGPSet Chipset with 4X AGP >10GB HD - currently 1 partition NTFS file system > >My thoughts were to install Caldera e-Desktop 2.4 which I have had some >success with. What I'm not sure about is re-partitioning the HD to >accommodate 2 Operating Systems. Caldera comes with a slim version of >Partition Magic, but I haven't had the opportunity to use it on NTFS, so >that is where any suggestions would help. > I've got a Dell Inspiron 3800 that I dual boot between windows ME (don't laugh, I've kept it for DVD playback) and Mandrake. It works fine, though the modem doesn't work... Another response sugguested reformatting the disk, if you haven't customized it much, follow this advice, it saves a lot of grief later. I also believe that NTFS support is still labeled "experimental" and "read only" in the kernel setup, so you may want to use FAT32 anyway (too bad win2k doesn't run off of ResierFS, huh?). For partitioning, I use Mandrake, so I've got diskdrake; but since you've got Caldera you may want to download something called GNUPartD, it's another graphical partitioning tool, under GPL, that is a replacement of disk druid. I've not used it, but Suse uses it as it's partitioning tool and I've not read one complaint about it. Hope this helps. Wes >Thanks for the time. > >Matthew > > > >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug >

1 0

Double Dial Out
by Bob Brown 01 Jun '01

01 Jun '01

I was wondering if anyone knows the fix to the double dial problem? Whenever I dial out from my RH 6.1 Linux box (using Linuxconf) the system dials, connects, hangs-up and display "The Command /sbin/ifup ppp0 is taking longer than expected to complete. Please take action" Then it automatically re-dials and successfully connects. I found this reported in several Usenet groups and archives since 1999 but I have not seen a resolution. Thanks, Bob Brown

1 0

MegaMeeting
by Andy Stewart 01 Jun '01

01 Jun '01

HI gang, USDataCenters is holding a meeting in Marlboro, MA on Wednesday, June 6, 2001 for a number of Boston area computer user groups. Most of these groups are Windows related, but not all. I have signed up to represent WLUG. GNHLUG, BLU, and (I think) MWBLUG will also be in attendance. If you want more information, or perhaps you'd like to attend as well, check out this website: http://www.BostonUserGroups.com/MegaMeeting/Default.htm Preregistration is required so please sign up if you plan to attend. I tried to get a table just for WLUG, but they have run out of tables. The Boston Linux and Unix User Group was kind enough to allow us to share some space with them (many thanks to Jerry Feldman). I'll be seeking out the local Kinkos for printing up some flyers this weekend. If anybody does plan to go, please drop me an e-mail just to let me know. Later, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

1 0

SCSI Tape Drive Question
by Marc Hughes 31 May '01

31 May '01

We have a kicking VA Linux 4450 server with a VXA-V17 tape drive in it. Unfortunatly the tape drive isn't seen by linux. It shows up in the scsi bios utilities. There is no mention of a tape drive in dmesg or /var/log/messages after bootup, and it doesn't work when you try something like "mt -f /dev/st0 status". The drive is on scsi channel B, does that make a difference? Is there some way to scan the scsi bus manually? I checked /proc/config.gz and tape drive support is built in. Any ideas, suggestions? -Marc

3 2

Samba question
by Thomas Carey 30 May '01

30 May '01

1 0