- WLUG - wlug.mailman3.com

Further info on my Core 6 problems
by ken jones Dec. 6, 2006

Dec. 6, 2006

When I first installed CORE 6 it booted just fine. Now it hangs and gives the message snipped below. If I do [CNTRL C] it finishes. It says that it can not find Linux/version.h where it thinks it should be. I have erased the kernel-devel package. Why is it trying to compile? It is referring to a SMP version. I do not see the string SMP anywhere in the REDHAT download page <http://download.fedora.redhat.com/pub/fedora/linux/core/updates/6/i386/>. What do you think is going on? Ken Jones ---------------start snip---------- No prebuilt modules for: Fedora - 6 linux-2.6.18-1.2849.fc6.i686-SMP. Trying to automatically build the driver modules. (This requires a C compiler and proper kernel sources to be installed) WARNING - Missing file /usr/src/linux/include/linux/version.h. The cause of this is usually a missing or unconfigured kernel source tree (and sometimes an incorrect directory or symbolic link.) However, proper /boot/config-2.6.18-1.2849.fc6 was found. ---------------end snip----------- As I said. At this point the little spinning icon is busy. The progression bar is not progressing. CNTRL-C initiales a successful finish of the boot. Ken Jones

2 1

Re: [Wlug] Fedora Core 6 kernel source???
by ken jones Dec. 5, 2006

Dec. 5, 2006

Here are the important results of lsmod and lspci. [root@kjones-fedora alsa-driver-1.0.9rc4a]# /sbin/lsmod | grep snd [root@kjones-fedora alsa-driver-1.0.9rc4a]# /sbin/lspci -vvv 02:09.0 Multimedia audio controller: Creative Labs [SB Live! Value] EMU10k1X Subsystem: Creative Labs Unknown device 1003 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min, 5000ns max) Interrupt: pin A routed to IRQ 3 Region 0: I/O ports at dc40 [size=32] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:09.1 Input device controller: Creative Labs [SB Live! Value] Input device controller Subsystem: Creative Labs Unknown device 1003 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Region 0: I/O ports at dc70 [size=8] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- --------------------------------------------------------------------------------- Back around Core3 and Core4 I used "soundon" and "soundoff" from <http://www.4front-tech.com/>. That is where this all started. Open Sound System does not work either. Here is what happens when I type 'soundon'. -------------start Open Sound System snip------------- [root@kjones-fedora alsa-driver-1.0.9rc4a]# soundon Relinking OSS kernel modules for "2.6.18-1.2849.fc6 SMP mod_unload 586 REGPARM 4KSTACKS gcc-4.1" This may take few moments - please stand by... OSS build environment set up for REGPARM kernels Warning: Cannot locate the Linux kernel development package for Linux kernel version 2.6.18-1.2849.fc6 Please install the kernel development package if linking the OSS modules fails. The kernel development package may be called kernel-devel, kernel-smp-devel, kernel-sources, kernel-headers or something like that. Please refer to the documentation of your Linux distribution if there are any difficulties in installing the kernel/driver development environment. Assuming that you are using Fedora Core 5 or later the right kernel source package (RPM) is probably called kernel-smp-devel. Building module osscore Failed to compile OSS make -C /lib/modules/2.6.18-1.2849.fc6/build M=/usr/lib/oss/build modules make[1]: Entering directory `/usr/src/kernels/2.6.18-1.2798.fc6-i686' make[1]: *** No rule to make target `modules'. Stop. make[1]: Leaving directory `/usr/src/kernels/2.6.18-1.2798.fc6-i686' make: *** [default] Error 2 Relinking the OSS kernel modules failed [root@kjones-fedora alsa-driver-1.0.9rc4a]# -----------------end OSS snip----------- (Why do my messages to WLUG have grey fonts instead of black?) Ken Jones

2 1

Re: [Wlug] Mythtv Packages
by Clint Moyer Dec. 5, 2006

Dec. 5, 2006

Hmmm, I'm running it on an Athlon 64 and a Sempron. Got a link? ---- Chuck Noyes <vze284qe(a)verizon.net> wrote: > > Oh.... > > I can't upgrade to 'edgy' because the kernel that is distributed on the > edgy CD causes my system to kernel-panic. According to the ubuntu > website, it appears to be a known problem that the edgy kernel has with > AMD Athlon systems.

2 1

Mythtv Packages
by Chuck Noyes Dec. 5, 2006

Dec. 5, 2006

Hi All, I'm trying to build a Mythtv box, and I'd like to know where I can find either the 0.19 or 0.20 Mythtv packages for Ubuntu "Dapper". I've looked around and all I can find are the 0.18 packages. The 0.19 version has been out for a while and I guess the 0.20 version is still sort of 'bleeding' edge. So there probably isn't a "Dapper" package for that yet. Thanks, -- -Chuck

4 5

Re: [Wlug] Fedora Core 6 kernel source???
by ken jones Dec. 5, 2006

Dec. 5, 2006

My problem is that I understand the details of neither the kernel nor the sound card. I think everyone's advice is to: [rpm -e kernel-devel] and [rpm -ihv kernel-2.6.18-1.2849.fc6.src.rpm]. The try again according to the alsa WEB page. Sound right? Ken

3 2

Please ignore "first snip"
by ken jones Dec. 5, 2006

Dec. 5, 2006

First snip was clearly my mistake. Please ignore. Ken

1 0

Specific alsa errors....Core 6
by ken jones Dec. 5, 2006

Dec. 5, 2006

Prior to this point I had had some problems An error message kept saying that it could not find my Linux/version.h file. I did a 'locate' command and got three locations. I do not know what to make of all this. Ken Jones Here's what happened. ----------start first snip--------- [root@kjones-fedora alsa-driver-1.0.9rc4a]# locate include/linux/version.h /usr/include/linux/version.h /usr/src/kernels/2.6.18-1.2849.fc6-i686/include/linux/version.h /usr/src/redhat/BUILD/kernel-2.6.18/linux-2.6.18.i686/include/linux/version.h -------so did a [configure --with-kernel=] to one of the above--------- [root@kjones-fedora alsa-driver-1.0.9rc4a]# ./configure --with-kernel=/usr/src/redhat/BUILD/kernel-2.6.18/linux-2.6.18.i686/include/linux checking for gcc... gcc checking for C compiler default output... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking for ranlib... ranlib checking for a BSD-compatible install... /usr/bin/install -c checking how to run the C preprocessor... gcc -E checking for egrep... grep -E checking for ANSI C header files... yes checking for an ANSI C-conforming const... yes checking for inline... inline checking whether time.h and sys/time.h may both be included... yes checking whether gcc needs -traditional... no checking for current directory... /usr/src/alsa-driver-1.0.9rc4a checking cross compile... checking for directory with kernel source... /usr/src/redhat/BUILD/kernel-2.6.18/linux-2.6.18.i686/include/linux checking for directory with kernel build... checking for kernel version... The file /usr/src/redhat/BUILD/kernel-2.6.18/linux-2.6.18.i686/include/linux/include/linux/version.h does not exist. Please, install the package with full kernel sources for your distribution or use --with-kernel=dir option to specify another directory with kernel sources (default is /lib/modules/2.6.18-1.2849.fc6/source). /usr/src/redhat/BUILD/kernel-2.6.18/linux-2.6.18.i686/include/linux/version.h [root@kjones-fedora alsa-driver-1.0.9rc4a]# ./configure --with-kernel=/usr/src/redhat/BUILD/kernel-2.6.18/linux-2.6.18.i686/include/linux checking for gcc... gcc checking for C compiler default output... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking for ranlib... ranlib checking for a BSD-compatible install... /usr/bin/install -c checking how to run the C preprocessor... gcc -E checking for egrep... grep -E checking for ANSI C header files... yes checking for an ANSI C-conforming const... yes checking for inline... inline checking whether time.h and sys/time.h may both be included... yes checking whether gcc needs -traditional... no checking for current directory... /usr/src/alsa-driver-1.0.9rc4a checking cross compile... checking for directory with kernel source... /usr/src/redhat/BUILD/kernel-2.6.18/linux-2.6.18.i686/include/linux checking for directory with kernel build... checking for kernel version... The file /usr/src/redhat/BUILD/kernel-2.6.18/linux-2.6.18.i686/include/linux/include/linux/version.h does not exist. Please, install the package with full kernel sources for your distribution or use --with-kernel=dir option to specify another directory with kernel sources (default is /lib/modules/2.6.18-1.2849.fc6/source). ----------end first snip------- ---------start second snip-------- [root@kjones-fedora alsa-driver-1.0.9rc4a]# ./configure --with-kernel=/usr/src/redhat/BUILD/kernel-2.6.18/linux-2.6.18.i686 checking for gcc... gcc checking for C compiler default output... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking for ranlib... ranlib checking for a BSD-compatible install... /usr/bin/install -c checking how to run the C preprocessor... gcc -E checking for egrep... grep -E checking for ANSI C header files... yes checking for an ANSI C-conforming const... yes checking for inline... inline checking whether time.h and sys/time.h may both be included... yes checking whether gcc needs -traditional... no checking for current directory... /usr/src/alsa-driver-1.0.9rc4a checking cross compile... checking for directory with kernel source... /usr/src/redhat/BUILD/kernel-2.6.18/linux-2.6.18.i686 checking for directory with kernel build... checking for kernel version... 0.0.0 checking for GCC version... Kernel compiler: Used compiler: gcc (GCC) 4.1.1 20061011 (Red Hat 4.1.1-30) *** NO PREDEFINED KERNEL COMPILER IS DETECTED *** Assuming the same compiler is used with the current system compiler. *** Please make sure that the same compiler version was used for building kernel. checking for built-in ALSA... "no" checking for existing ALSA module... "yes" checking for Red Hat kernel... "auto" checking for Red Hat kernel... "no" checking for SUSE kernel... "auto" checking for SUSE kernel... "no" checking to modify of kernel linux/kmod.h... "no" checking for kernel linux/compiler.h... "yes" checking for kernel linux/pm.h... "yes" checking for kernel linux/spinlock.h... "yes" checking for kernel linux/irq.h... "yes" checking for kernel linux/threads.h... "yes" checking for kernel linux/rwsem.h... "yes" checking for kernel linux/gameport.h... "yes" checking for kernel linux/devfs_fs_kernel.h... "no" Creating a dummy <linux/devfs_fs_kernel.h>... checking for kernel linux/highmem.h... "yes" checking for kernel linux/workqueue.h... "yes" Removing a dummy linux/workqueue.h. checking for kernel linux/dma-mapping.h... "yes" Removing a dummy linux/dma-mapping.h. checking for kernel asm/hw_irq.h... "yes" checking for kernel linux/device.h... "yes" Removing a dummy linux/device.h. checking for kernel linux/jiffies.h... "yes" Removing a dummy linux/jiffies.h. checking for kernel linux/compat.h... "yes" Removing a dummy linux/compat.h. checking for kernel linux/adb.h... "yes" checking for kernel linux/cuda.h... "yes" checking for kernel linux/pmu.h... "yes" checking for kernel linux/moduleparam.h... "yes" Removing a dummy linux/moduleparam.h. checking for kernel linux/syscalls.h... "yes" Removing a dummy linux/syscalls.h. checking for kernel linux/firmware.h... "yes" checking for exported symbol dump_stack... grep: /usr/src/redhat/BUILD/kernel-2.6.18/linux-2.6.18.i686/kernel/ksyms.c: No such file or directory "no" checking for kernel module symbol versions... "yes" checking for PCI support in kernel... "yes" checking for I2C driver in kernel... module checking for firmware loader... yes checking for directory to store kernel modules... /lib/modules/0.0.0/misc checking for verbose printk... on checking for debug level... none checking for processor type... i686 checking for i386 machine type... default checking for SMP... "yes" checking for ISA PnP driver in kernel... yes checking for PnP driver in kernel... yes checking for Kernel ISA-PnP support... "yes" checking for strlcpy... "no" checking for snprintf... "no" checking for vsnprintf... "no" checking for scnprintf... "no" checking for sscanf... "no" checking for vmalloc_to_page... "no" checking for old kmod... "yes" checking for PDE... "no" checking for pci_set_consistent_dma_mask... "no" checking for pci_dev_present... "no" checking for msleep... "no" checking for tty->count is the atomic type... "no" checking for io_remap_pfn_range... "no" checking for new io_remap_page_range... "no" checking for kcalloc... "no" checking for saved_config_space in pci_dev... "no" checking for old kill_fasync... "no" checking for dma_addr_t... "no" checking for MUTEX macros... "no" Removing local linux/pnp.h. checking for driver version... 1.0.9rc4a checking for sequencer support... yes checking for OSS/Free emulation... yes checking for RTC callback support in kernel... "no" checking for HPET support... "yes" checking for Procfs support... "yes" checking for USB support... "yes" checking for PC-Speaker hook... "no" checking for kernel PCMCIA checking for PCMCIA support... "yes" checking for PC9800 support in kernel... "no" checking for parallel port support... "yes" checking for which soundcards to compile driver for... all configure: creating ./config.status config.status: creating version config.status: creating Makefile.conf config.status: creating snddevices config.status: creating utils/alsa-driver.spec config.status: creating utils/buildrpm config.status: creating toplevel.config config.status: creating utils/alsasound config.status: creating utils/alsasound.posix config.status: creating include/config.h config.status: creating include/config1.h config.status: creating include/version.h config.status: include/version.h is unchanged config.status: creating include/autoconf-extra.h Hacking autoconf.h... -----------end second snip------- ---------start third snip-------- [root@kjones-fedora alsa-driver-1.0.9rc4a]# make install rm -f /lib/modules/0.0.0/misc/snd*.*o /lib/modules/0.0.0/misc/persist.o /lib/modules/0.0.0/misc/isapnp.o make[1]: Entering directory `/usr/src/alsa-driver-1.0.9rc4a/acore' mkdir -p /lib/modules/0.0.0/misc cp snd-hpet.o snd-hwdep.o snd-page-alloc.o snd-pcm.o snd-rawmidi.o snd-timer.o snd.o /lib/modules/0.0.0/misc cp: cannot stat `snd-hpet.o': No such file or directory cp: cannot stat `snd-hwdep.o': No such file or directory cp: cannot stat `snd-page-alloc.o': No such file or directory cp: cannot stat `snd-pcm.o': No such file or directory cp: cannot stat `snd-rawmidi.o': No such file or directory cp: cannot stat `snd-timer.o': No such file or directory cp: cannot stat `snd.o': No such file or directory make[1]: *** [_modinst__] Error 1 make[1]: Leaving directory `/usr/src/alsa-driver-1.0.9rc4a/acore' make: *** [install-modules] Error 1 ------end third snip------- ----I continued to struggle, but to no avail-----------

1 0

Fedora Core 6 kernel source???
by ken jones Dec. 4, 2006

Dec. 4, 2006

I have a SoundBlaster Live sound card. The driver is emu10k1. ALSA provides some modules that need to be built into the kernel. No matter what I do the builds can not find the appropriate version.h file. I am trying to build the kernel from kernel-devel-2.6.18-1.2849.fc6. Previous Core versions provided a kernel-source rpm. Core 6 does not. This time it is called kernel-devel. Something is very different. Can any of you point me to a cook book level WEB page that will point my way... -----------------snip example of trouble------------ checking for directory with kernel source... /lib/modules/2.6.18-1.2849.fc6/source checking for directory with kernel build... /lib/modules/2.6.18-1.2849.fc6/build checking for kernel version... The file /lib/modules/2.6.18-1.2849.fc6/source/include/linux/version.h does not exist. Please, install the package with full kernel sources for your distribution or use --with-kernel=dir option to specify another directory with kernel sources (default is /lib/modules/2.6.18-1.2849.fc6/source). ------------end snip------------------ I tried the --with-kernel=dir option. I would like sound again. Help! Ken Jones

4 4

Hardware for Sale
by Chuck Noyes Dec. 4, 2006

Dec. 4, 2006

Hi All, The company where I used to work...is looking to sell off some h/w. Below, is a list of what they're selling. Please note, I'm not selling the h/w. If you're interested in any of this, please let me know and I'll put you in touch with the appropriate person. Currently, just about all of this h/w is mounted in the 24U rack mentioned below. 3 Dell PowerEdge 1750 servers - 533 MHz FSB - 512 KB L2 Cache - 2 CPU sockets but only 1 populated. Each Server Has: 1 Intel Xeon 2.8 GHz CPU 1 GB RAM 1 74 GB SCSI 10K RPM Hard Drive 1 On-board ATI Rage SVGA adapter 1 Teac CD-ROM * 1 Floppy Drive 1 On-board 2 port gigabit ethernet NIC ** 1 On-board SCSI Ultra 320 Card 1 Qlogic QLA2340 PCI Fibre-Channel Card 1 USB 2.0 port All servers have Windows 2003 Server installed (but that can be fixed easily...) * = Server #2 has an NEC DVD/RW drive ** = Server #1 has a Realtek 8139 fast ethernet NIC in addition to the 2-port gig-e NIC Other Hardware: 1 24U 19 inch rack 1 Rack mounted Brocade Silkworm 8-port 3200 FC switch 1 Dell PowerVault 136T Tape Library Unit (really an ADIC Scalar 100) 2 SDLT320 tape drives internal to the TLU 1 Dell PowerConnect unmanaged 16-port ethernet switch 1 Belkin 4-machine KVM switch 2 SMC TigerStack III (SMC Model #6824M) 24-port managed ethernet switches 4 APC 750VA Battery Backup Units 1 Rack mounted APC Smart-UPS 2200VA Battery Backup Unit -- -Chuck

1 0

reiserfs corruption....
by Eric Stein Dec. 1, 2006

Dec. 1, 2006

Hi all, After a nasty power problem, I have corruption on a reiserfs volume. What I did: http://toba.ath.cx:724/~eastein/reiserfsck.txt I think I may have a damaged drive. The scariest prospect: Bad root block 0. (--rebuild-tree did not complete) Any ideas? Eric

2 3