- WLUG - wlug.mailman3.com

Re: [Wlug] Linker error: DSO missing from command line
by John Stoffel July 16, 2016

July 16, 2016

Andy, So what if you just putt the following into the src/Makefile.am file: AM_LDFLAGS = \ -lm I put it after the AM_CPPFLAGS definition up top. Seemed to do what I needed, but I haven't setup an Ubuntu 16.04 test VM yet to confirm. John

1 0

Re: [Wlug] Linker error: DSO missing from command line
by John Stoffel July 16, 2016

July 16, 2016

>>>>> "Andy" == Andy Stewart <kb1oiq(a)mval.net> writes: Andy> On 07/15/2016 10:44 AM, John Stoffel wrote: >> >> Do you have git repository with this available so I can try playing >> with it at as well? I spent some time on getting autoconf working >> with duc (http://github.com/zevv/duc) so I might be able to help. >> >> John Andy> I don't have a git repository, but one can download the source Andy> tarball: Andy> http://download.savannah.gnu.org/releases/xlog/xlog-2.0.14beta.tar.gz Ok, I've pulled it down and started to play with it. We'll see how far I get. :-) Busy with a bunch of stuff today and tomorrow, so it might be a few days...

1 0

Re: [Wlug] Linker error: DSO missing from command line
by Andy Stewart July 15, 2016

July 15, 2016

On 07/15/2016 10:44 AM, John Stoffel wrote: > > Do you have git repository with this available so I can try playing > with it at as well? I spent some time on getting autoconf working > with duc (http://github.com/zevv/duc) so I might be able to help. > > John Hi John, I don't have a git repository, but one can download the source tarball: http://download.savannah.gnu.org/releases/xlog/xlog-2.0.14beta.tar.gz Thanks, Andy -- Andy Stewart (KB1OIQ) Founder: Worcester Linux Users' Group Founder: Chelmsford Linux Meetup Group President: PART of Westford, MA (WB1GOF)

1 0

Re: [Wlug] Linker error: DSO missing from command line
by John Stoffel July 15, 2016

July 15, 2016

>>>>> "Andy" == Andy Stewart <kb1oiq(a)mval.net> writes: Andy> I have received a few reports indicating that xlog will not Andy> compile without error from the source tarball. Since I'm the Andy> xlog maintainer, I get to fix it, but so far, I've been Andy> unsuccessful. Andy> The error looks like this, and I've easily reproduced it on Ubuntu 16.04 Andy> LTS: Andy> /usr/bin/ld: gui_gtkprintdialog.o: undefined reference to symbol Andy> 'trunc@@GLIBC_2.2.5' Andy> //lib/x86_64-linux-gnu/libm.so.6: error adding symbols: DSO missing from Andy> command line Andy> I've traced this to recently modified behavior of gcc, where all Andy> libraries needed to properly link the executable must be Andy> included on the command line. In this case, "-lm" is not Andy> explicitly on the command line, and thus the error. Interesting. Have you been running 'autoreconf -force' after each time you make a change, esp in the .ac and .am files? I've found that sometimes it doesn't quite do what I expect. Andy> I have succeeded in making it work in this way, but it is just a workaround: Andy> ./configure LIBS="-lm" Andy> make Andy> make install Andy> It seems that automake 1.15 is needed to help get around this issue, and Andy> that version is part of Ubuntu 16.04. Andy> However, I'm stuck, trying to figure out the "right way" to fix this. Andy> I've googled for a couple of hours, trying to figure out what needs to Andy> go into configure.ac and/or Makefile.am, to no avail. Andy> I tried this in configure.ac: LT_LIB_M Andy> (nope) Andy> I tried this in Makefile.am: LIBS=-lm Andy> (nope) Andy> I also tried this in Makefile.am: LDFLAGS = -lm Andy> (nope) Andy> In each case, I reran autoconf, automake, and then ./configure, but the Andy> linker error persists. Andy> I must be missing something easy. Any helpful hints would surely be Andy> appreciated. Do you have git repository with this available so I can try playing with it at as well? I spent some time on getting autoconf working with duc (http://github.com/zevv/duc) so I might be able to help. John

1 0

HT Receiver
by Gary Hanley July 15, 2016

July 15, 2016

Hello folks, I hope I'm not breaking protocol for posting this but I'm replacing my home theater receiver and looking to sell my current unit so I thought I would offer it here. I think it's a good deal for anyone who doesn't need the very latest HT specs. I bought it new for $1100 when it was first made available about three years plus ago and it works as good as the day it was purchased. It's a Yamaha RX-A1020 and the product page can be found here: http://usa.yamaha.com/products/audio-visual/aventage/rx-a1020_black_u/ As I type this there are new models on eBay for $699 and a used model for $550. I'm asking $500. The unit is still attached to my HT system so I can demo it for anyone who might be interested. Thanks everyone.

1 0

Linker error: DSO missing from command line
by Andy Stewart July 15, 2016

July 15, 2016

Hi Everybody, I have received a few reports indicating that xlog will not compile without error from the source tarball. Since I'm the xlog maintainer, I get to fix it, but so far, I've been unsuccessful. The error looks like this, and I've easily reproduced it on Ubuntu 16.04 LTS: /usr/bin/ld: gui_gtkprintdialog.o: undefined reference to symbol 'trunc@@GLIBC_2.2.5' //lib/x86_64-linux-gnu/libm.so.6: error adding symbols: DSO missing from command line I've traced this to recently modified behavior of gcc, where all libraries needed to properly link the executable must be included on the command line. In this case, "-lm" is not explicitly on the command line, and thus the error. I have succeeded in making it work in this way, but it is just a workaround: ./configure LIBS="-lm" make make install It seems that automake 1.15 is needed to help get around this issue, and that version is part of Ubuntu 16.04. However, I'm stuck, trying to figure out the "right way" to fix this. I've googled for a couple of hours, trying to figure out what needs to go into configure.ac and/or Makefile.am, to no avail. I tried this in configure.ac: LT_LIB_M (nope) I tried this in Makefile.am: LIBS=-lm (nope) I also tried this in Makefile.am: LDFLAGS = -lm (nope) In each case, I reran autoconf, automake, and then ./configure, but the linker error persists. I must be missing something easy. Any helpful hints would surely be appreciated. Thanks, and 73, Andy -- Andy Stewart (KB1OIQ) Founder: Worcester Linux Users' Group Founder: Chelmsford Linux Meetup Group President: PART of Westford, MA (WB1GOF)

1 0

Re: [Wlug] Reminder: Meeting July 14th, 2016. Topic: SCM with Git and Gitlab!
by Tim Keller July 14, 2016

July 14, 2016

Yup! Back in the round room of slider rule doom! On Thu, Jul 14, 2016 at 2:03 PM, Keith Wright <kwright(a)keithdiane.us> wrote: > Tim Keller <turbofx(a)gmail.com> writes: > > > Hey Everybody! > > > > This is a reminder we've got a WLUG meeting on July 14th! > > And this is another, I'll be leaving here soon. > > > > When: July 14th, 2016 @ 7pm > > Where: WPI Mid Century room rm 331 > > I'm assuming this is back in the second floor > of the Student Center, I forget the official > name. > > -- Keith > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

1 0

Re: [Wlug] Reminder: Meeting July 14th, 2016. Topic: SCM with Git and Gitlab!
by Keith Wright July 14, 2016

July 14, 2016

Tim Keller <turbofx(a)gmail.com> writes: > Hey Everybody! > > This is a reminder we've got a WLUG meeting on July 14th! And this is another, I'll be leaving here soon. > > When: July 14th, 2016 @ 7pm > Where: WPI Mid Century room rm 331 I'm assuming this is back in the second floor of the Student Center, I forget the official name. -- Keith

1 0

Reminder: Meeting July 14th, 2016. Topic: SCM with Git and Gitlab!
by Tim Keller July 10, 2016

July 10, 2016

Hey Everybody! This is a reminder we've got a WLUG meeting on July 14th! I'm going to be doing a presentation and demo detailing Source Control Management (SCM) using git and the git collaboration software "gitlab". Topic: SCM with git and gitlab When: July 14th, 2016 @ 7pm Where: WPI Mid Century room rm 331 Who: Tim Keller Here's a funny XKCD regarding git... https://xkcd.com/1597/ Snacks and refreshments will be provided and afterwards we'll head off to Tech Pizza to continue the conversation. Thanks, Tim. -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

1 0

Re: [Wlug] Topic ideas for next meeting...
by Eric Martin June 21, 2016

June 21, 2016

I'm game On Sunday, June 19, 2016, Tim Keller <turbofx(a)gmail.com> wrote: > Hey Gang, > > Would people be interested in my talking about GitLab? It's basically > your own personal Github. > > I could also dove tail this into a general talk about Git / Source > Control, etc. > > Thanks, > Tim. > > -- > I am leery of the allegiances of any politician who refers to their > constituents as "consumers". > -- Sent from Gmail Mobile

1 0