- WLUG - wlug.mailman3.com

NEW Pioneer DVD-RW A05 for sale
by Skip Gaede 01 Jun '03

01 Jun '03

Folks, Ever made a mistake? I did. I purchased a new DVD-RW drive to replace the unit I thought was defective. After the unit arrived (Thursday) I subsequently trace the problem to an intermittent IDE cable. I'd like to sell the new one if anyone's in the market. The A05 is a 4X drive, and I paid $225.00. for it. I'd be happy to sell it for a reduced price of $200.00 if anyone's interested. Thanks, Skip

1 0

Last modified time
by Michael Long 24 May '03

24 May '03

How reliable is the ls -l listing. In other words is it possible to modify a file and leave false timestamp on it. Thanks, -- Michael Long <mlong(a)datalong.com>

2 2

writer problem
by Stéphane Purnelle 24 May '03

24 May '03

I forgot the attached file. And the writer model is 48125S not 18125S. Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev=0,0,0 gracetime=2 fs=2048k driveropts=burnfree,noforcespeed -v -useinfo speed=12 -dao -dummy -eject -pad -data "/rsrv/var/images/download1-01.img" ... scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.24 pregap1: -1 Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.7' Driveropts: 'burnfree,noforcespeed' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'LITE-ON ' Identifikation : 'LTR-48125S ' Revision : '1S05' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1422080 = 1388 KB FIFO size : 2097152 = 2048 KB Track 01: data 648 MB padsize: 30 KB Total size: 745 MB (73:49.85) = 332239 sectors Lout start: 745 MB (73:51/64) = 332239 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type B, low Beta category (B-) (4) ATIP start of lead in: -11933 (97:22/67) ATIP start of lead out: 359849 (79:59/74) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 43 Manufacturer: Acer Media Technology, Inc. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 27610 Forcespeed is OFF. Starting to write CD/DVD at speed 12 in dummy SAO mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Sending CUE sheet... Writing pregap for track 1 at -150 Starting new track at sector: 0 cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 05 16 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 08 03 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0x08 Qual 0x03 (logical unit communication crc error (ultra-dma/32)) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.033s timeout 200s Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 write track data: error after 2666496 bytes Writing time: 23.177s Average write speed 191.3x. Min drive buffer fill was 99% Fixating... WARNING: Some drives don't like fixation in dummy mode. Fixating time: 0.703s BURN-Free was never needed. cdrecord: fifo had 74 puts and 43 gets. cdrecord: fifo was 0 times empty and 33 times full, min fill was 75%.

2 2

cd-writer problem
by Stéphane Purnelle 24 May '03

24 May '03

Hi I have a problem with my cd-writer. On windows, I have no problem (dommage). But with my redhat 8.0 kernel 2.4.18-24.8.0. I cannot burn a CD. maybe it's a bad version of kernel ? writer : liteon 18125s 48x12x48 with burn proof (http://www.liteonit.com) You can read the output of x-cd-roast in the attached file. than you for your futur anwser

2 3

Interesting reading
by Andy Stewart 20 May '03

20 May '03

http://www.opensource.org/sco-vs-ibm.html -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

1 0

http load generators
by twg3＠attbi.com 20 May '03

20 May '03

Does anyone have any recommendations of open source tools for generating very high volume http traffic simulating large numbers of clients form multiple IP addresses? I did a search on sourceforge and most of the projects have not released any new code in 18 months or more - so not sure of status on most of them. I need to test an application that uses HTTP as its transport layer (but not HTML) so open source tools would allow the customizations I need, with out haveing to write everything from scratch.

4 3

scanner help
by Bill Mills-Curran 20 May '03

20 May '03

I have a new Epson 1660 scanner, and I'm having difficulty getting it working with the sane drivers. Here's what I have thus far... 1. lsusb worked immediately. Here's some of the output: Bus 001 Device 001: ID 0000:0000 Virtual Hub Device Descriptor: <snip> Bus 001 Device 002: ID 04b8:011e Seiko Epson Corp. Device Descriptor: <snip> Bus 001 Device 003: ID 03f0:0317 Hewlett-Packard Device Descriptor: <snip> (I recently unloaded & loaded the USB & printer modules, and the device numbers for the printer (HP) and scanner (Epson) changed.) 2. sane-find-scanner: found USB scanner (vendor = 0x04b8, product = 0x011e) at device /dev/usb/scanner0 This did not work until I added this to the /etc/modules.conf file and modprobe'd "scanner": options scanner vendor=0x04b8 product=0x011e 3. My /etc/sane.d/epson.conf file has: usb /dev/usb/scanner0 (Is that right? I did try some other devices) I also tried usb 0x04b8 0x011e No luck 4. I chmod'd (666) /dev/usb/scanner*. 5. xsane always fails. Here are some of the messages. > xsane no devices available > xsane epson:/dev/usb/scanner0 Failed to open device 'epson:/dev/usb/scanner0': Operation not supported. Any suggestions? TIA, Bill P.S. I'm running stock Red Hat 8.0. (I have installed the ALSA sound modules.)

2 4

Xfer mail from Outlook to...
by Stephen C. Daukas 19 May '03

19 May '03

Anyone out there know how to get email out of Outlook/Exchange and into something else? I use outlook at work, and also at home when doing stuff for work, but want to get all that stuff into a flat file similar to what UNIX uses (used?), which is also similar to what Eudora uses. In other words, I want to get away from Outlook/exchange all together and get into a format that is easily manipulated by scripts or easily imported into other email applications. Any help would be greatly appreciated! Regards, Steve

4 4

Testing WLUG e-mail list
by Andy Stewart 18 May '03

18 May '03

...I'm trying to figure out why I got 14 copies (literally!) of Steve Daukas' posting, as well as a couple of others. Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

4 4

Clarification: location of next meeting
by Andy Stewart 14 May '03

14 May '03

HI Everybody, There was a minor error on the WLUG home page that might have caused some confusion. The next WLUG meeting is in a new location, that being Olin Hall room 107. FYI: I'm told that the lobby area of Salisbury Labs is/will be undergoing renovation, hence we cannot use that room for the entire summer, so we'll be in Olin Hall 107 for the next few meetings. My apologies if there was any confusion. Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

1 0