- WLUG - wlug.mailman3.com

another acronym
by doug waud Feb. 19, 2004

Feb. 19, 2004

Hi all A friend sent me the following. Thought you guys might enjoy it. I was having trouble with my computer. So I called the computer guy, to come over. He clicked a couple of buttons and solved the problem and gave me a bill for a minimum service call. As he was walking away, I called after him, "So, what was wrong?" He replied, "It was an `ID ten T' error." I didn't want to appear stupid, but nonetheless inquired: "An, ID ten T error? What's that .... In case I need to fix it again?" "Write it down," he said, "and I think you'll figure it out." So I wrote out ...... I D 1 0 T

2 1

Something very cool...
by Keller, Tim Feb. 17, 2004

Feb. 17, 2004

I just saw this on one of the other lists I'm on and I'm testing it out and it seems to work. http://shfs.sourceforge.net/ It lets you mount a remote filesystem over an SSH link. ala mount -t shfs root@someserver /mnt/localmntpnt Very cool. Tim.

4 3

by Clint Moyer Feb. 11, 2004

Feb. 11, 2004

Hi. I bought a Ximeta Netdisk (http://ximeta.com/products/netdisk.html) which is an external HDD with both USB and network connectivity. The company explicitly states that the device works with Red Hat 8 and 9, but I've had no luck with it. The drivers are available only as RPMs, no source provided. It's network attached, but it doesn't use a standard protocol. The RPM is supposed to install two modules, nd.o and lpx.o, but they don't show up with lsmod. When I try to load them with insmod or modprobe, I get a bunch of error messages about "unresolved symbols". I though it may have been a dependency problem, so I recompiled to load network block device (nbd.o), but that had no effect. I've tried both RH 8 and 9 fresh stock installs with the same results. Ximeta has stated that they will provide me a new driver, but I'm not holding my breath. Any suggestions? Thanks.

3 3

RE: [Wlug]
by Martin, Eric Feb. 11, 2004

Feb. 11, 2004

1) do you have usb support in your kernel? 2) do a dmesg | tail and see if the kernel is catching the device being plugged in. -----Original Message----- From: Clint Moyer [mailto:cdmoyer@charter.net] Sent: Wednesday, February 11, 2004 10:48 AM To: wlug(a)mail.wlug.org Subject: [Wlug] Hi. I bought a Ximeta Netdisk (http://ximeta.com/products/netdisk.html) which is an external HDD with both USB and network connectivity. The company explicitly states that the device works with Red Hat 8 and 9, but I've had no luck with it. The drivers are available only as RPMs, no source provided. It's network attached, but it doesn't use a standard protocol. The RPM is supposed to install two modules, nd.o and lpx.o, but they don't show up with lsmod. When I try to load them with insmod or modprobe, I get a bunch of error messages about "unresolved symbols". I though it may have been a dependency problem, so I recompiled to load network block device (nbd.o), but that had no effect. I've tried both RH 8 and 9 fresh stock installs with the same results. Ximeta has stated that they will provide me a new driver, but I'm not holding my breath. Any suggestions? Thanks. _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

RE: [Wlug] Re: Wlug Digest, Vol 4, Issue 5
by Martin, Eric Feb. 11, 2004

Feb. 11, 2004

Setiathome is a good distributed program http://www.setiathome.com as well as gimps (can't remember the url). Seti is the Search for ExtraTerrestrial Life(be verry verry quiet, I'm hunting for aliens, huhuhuh). And GIMPs is the Great Internet Marsene Prime search (so we can keep having better encryption and such). Eric Martin -----Original Message----- From: sageman(a)WPI.EDU [mailto:sageman@WPI.EDU] Sent: Monday, February 09, 2004 10:17 AM To: wlug(a)mail.wlug.org Subject: [Wlug] Re: Wlug Digest, Vol 4, Issue 5 Hello, all. My name's Carlton and I figured this is probally the best place to post this note. My friends and I have recently got distcc working (a distributed compiler using gcc-3.3.2). We've currently got 7 (maybe 8?) computers running the distcc daemon right now. Basically, when any one of us compiles something the processess are distributed amongst the computers on the network running distcc. So, my question is, is anyone interested in joining our little group? I figure the more linboxes the merrier. We are also in the process of setting up a couple of G5's with cross compiling on distcc so any Mac guys out there are welcome to (but Linux/BSD guys are most welcome ^_^). Feel free to reply, sageman(a)wpi.edu, if you are interested. We are also looking at getting some other stuff distributed if at all possible but really haven't started looking anywhere yet. If anyone else some ideas of possible distributed software we can run, that information would also be greatly appreciated. Thank you in advance. Oh, and yes, the distcc webpage is here: http://distcc.samba.org/. - Carlton C. Stedman II _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

Re: Wlug Digest, Vol 4, Issue 6
by Ryan Caron Feb. 9, 2004

Feb. 9, 2004

I have two machines using Gentoo that also have distcc servers running on them. I also have a couple other friends that also use gentoo and would like to use a larger distcc network. Let's talk off the mailing list; I'm not particularly fond of posting my IP addresses on a public mailing list :-) Ryan Caron rcaron(a)wpi.edu On Mon, 9 Feb 2004 wlug-request(a)mail.wlug.org wrote: > Send Wlug mailing list submissions to > wlug(a)mail.wlug.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://mail.wlug.org/mailman/listinfo/wlug > or, via email, send a message with subject or body 'help' to > wlug-request(a)mail.wlug.org > > You can reach the person managing the list at > wlug-owner(a)mail.wlug.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Wlug digest..." > > > Today's Topics: > > 1. Re: Wlug Digest, Vol 4, Issue 5 (sageman(a)WPI.EDU) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 9 Feb 2004 10:16:51 -0500 (EST) > From: sageman(a)WPI.EDU > Subject: [Wlug] Re: Wlug Digest, Vol 4, Issue 5 > To: wlug(a)mail.wlug.org > Message-ID: > <33919.130.215.226.137.1076339811.squirrel(a)webmail.WPI.EDU> > Content-Type: text/plain;charset=iso-8859-1 > > Hello, all. My name's Carlton and I figured this is probally the best > place to post this note. My friends and I have recently got distcc working > (a distributed compiler using gcc-3.3.2). We've currently got 7 (maybe 8?) > computers running the distcc daemon right now. Basically, when any one of > us compiles something the processess are distributed amongst the computers > on the network running distcc. So, my question is, is anyone interested in > joining our little group? I figure the more linboxes the merrier. We are > also in the process of setting up a couple of G5's with cross compiling on > distcc so any Mac guys out there are welcome to (but Linux/BSD guys are > most welcome ^_^). Feel free to reply, sageman(a)wpi.edu, if you are > interested. We are also looking at getting some other stuff distributed if > at all possible but really haven't started looking anywhere yet. If anyone > else some ideas of possible distributed software we can run, that > information would also be greatly appreciated. Thank you in advance. > > Oh, and yes, the distcc webpage is here: http://distcc.samba.org/. > > - Carlton C. Stedman II > > > ------------------------------ > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > > > End of Wlug Digest, Vol 4, Issue 6 > ********************************** > > > --

2 1

Re: Wlug Digest, Vol 4, Issue 5
by sageman＠WPI.EDU Feb. 9, 2004

Feb. 9, 2004

Hello, all. My name's Carlton and I figured this is probally the best place to post this note. My friends and I have recently got distcc working (a distributed compiler using gcc-3.3.2). We've currently got 7 (maybe 8?) computers running the distcc daemon right now. Basically, when any one of us compiles something the processess are distributed amongst the computers on the network running distcc. So, my question is, is anyone interested in joining our little group? I figure the more linboxes the merrier. We are also in the process of setting up a couple of G5's with cross compiling on distcc so any Mac guys out there are welcome to (but Linux/BSD guys are most welcome ^_^). Feel free to reply, sageman(a)wpi.edu, if you are interested. We are also looking at getting some other stuff distributed if at all possible but really haven't started looking anywhere yet. If anyone else some ideas of possible distributed software we can run, that information would also be greatly appreciated. Thank you in advance. Oh, and yes, the distcc webpage is here: http://distcc.samba.org/. - Carlton C. Stedman II

1 0

Suspicious header?
by Bill Mills-Curran Feb. 9, 2004

Feb. 9, 2004

Wow. I just had a WLUG reply put on hold status due to a suspicious header. This is the first time this has happened to me. What's up? Thanks, Bill

3 2

how to setup wireless network for WPI campus
by Zhiwei Ren Feb. 8, 2004

Feb. 8, 2004

hi, everyone. I am trying to config my linux laptop so I can use wireless connection on campus. However, it is not easy. I modified some script file and added the SSID and WEP info into it. However, it still didn't work. Anyone have some idea or experience about this? thanks

4 6

What happened to the Boynton?
by Adam Keck Feb. 8, 2004

Feb. 8, 2004

Hello All, Not quite Linux, but... As I drove by the our post meeting watering hole I notice the front is all boarded up?! Are they remodeling or did someone crash into it? -Adam

3 2