- WLUG - wlug.mailman3.com

Re: Re: [Wlug] Setting up cable modem (Charter)
by falken July 1, 2001

July 1, 2001

I am new to the Mass. area, but I use to be a Sr. Network Admin with Charter Communications. The question that I have is are you using Charter@home or Charter Pipeline? If it is Charter@home then you have to make some different changes in your setup. You have to add some domain information. It took a while to finally Linux DHCP to with with Charter@home but we were able to figure it out. If it is Charter Pipeline I will be willing to find you some contact information with one othe the Sr. Network Admins that I know. Tom > rpm -q pump > > pump is Red Hat's DHCP client. If the above command shows > output, then it > is installed. > > Could you post the output of "/sbin/ifconfig -a"? > > On Sat, 30 Jun 2001, Thomas Carey wrote: > > tcarey> I apologize if I confused anyone. One nic is a > Intel Pro > tcarey> 100+. the other nic is a 3COM 3C905C. I alternated > nics to > tcarey> see if maybe one was not loading. Dumb question. > How do I > tcarey> know if pump is installed? Please be patient, I'm > fairly > tcarey> new to Linux (but have used it in the past as a > web and > tcarey> FTP server). > > Charles R. Anderson <cra(a)wpi.edu> / > http://angus.ind.wpi.edu/~cra/ > PGP Key ID: 49BB5886 > Fingerprint: EBA3 A106 7C93 FA07 8E15 3AC2 C367 A0F9 49BB > 5886 > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug

1 0

Re: [Wlug] Setting up cable modem (Charter)
by Thomas Carey June 30, 2001

June 30, 2001

2 1

Re: [Wlug] Setting up cable modem (Charter)
by Peter Gutowski June 30, 2001

June 30, 2001

On 6/30/01 3:34 PM, Thomas Carey <tcarey70(a)hotmail.com> wrote: > >I know I have seen several posts in the past, but I need a little >information on setting up my cable modem through Charter. > >A little background information; > >Red Hat 7.1 installed. > >I have two nics installed, one static (192.168.1.1 internal scheme), >one DHCP (connected to the cable modem, the cable modem when installed >by Charter was assigned 192.168.100.1). > >On boot up eth1 fails (eth1 is fine on boot up). I know I am probably >missing some configuration somewhere. I know both nic's are working >fine. After the first failed boot up (on eth1) I switched the cards, >and the static nic was fine. I'm assuming you've made a minor typing mistake in the first sentence of the previous paragraph (otherwise very confusing) I'm assuming also that you're saying that the internal card boots OK and the card hooked to the cable modem is failing: - be sure the driver module for the cable modem eth card is loaded (e.g 'insmod 3c90x' or whatever for your card ) - be sure the 'pump' package in installed > >Any ideas? If any of the above doesn't help, please give more info re: type of cards, excerpts of log files showing error messages, etc. config files, (e.g./etc/sysconfig/network-scripts/ifcfg-eth1) > >TIA > >Tom Carey >Get your FREE download of MSN Explorer at http://explorer.msn.com ><http://explorer.msn.com> >_______________________________________________ Wlug mailing list >Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

rpm problem
by Marc Hughes June 30, 2001

June 30, 2001

Having a problem with RPM... # rpm -qa |grep mozilla mozilla-0.9.1-ximian.4 nautilus-mozilla-1.0.3-ximian.3 mozilla-0.9.1-ximian.4 # rpm -e mozilla-0.9.1 error: "mozilla-0.9.1" specifies multiple packages # rpm -e mozilla-0.9.1-ximian.4 error: "mozilla-0.9.1-ximian.4" specifies multiple packages Any ideas on how I can actually remove those two identical packages that somehow got installed? (mozilla does not in fact work correctly) Thanks, -Marc

3 2

Familiar Linux help...
by Wesley Allen June 29, 2001

June 29, 2001

Hello all. I am FINALLY getting an iPaq and want to flash the ROM to install familar linux (or QT embedded). I've been looking over the howtos but I think I would feel better to have someone who's done this sitting over my shoulder so I don't make a $600 paperweight. Also, can someone tell me what apps are in ipkg format for familiar, I've been having trouble finding them? What about the possibility of switching between QT embedded and X for other useful apps (like, game boy emulators, for instance, or even the Atari Lynx...). Can anyone help me with this? Wes

1 0

RE: [Wlug] HP LH Pro...
by Keller, Tim June 29, 2001

June 29, 2001

Figured it out... Turned out that I could change the boot order on the machine, its working fine now. Tim. -----Original Message----- From: Keller, Tim [mailto:Tim.Keller@stratus.com] Sent: Friday, June 29, 2001 8:19 AM To: 'wlug(a)wlug.org' Subject: [Wlug] HP LH Pro... Probably a quick one, but neither google or I have sorted it out yet... I have a HP LH PRO with a AMI Megaraid controller in it. Connected to the controller are 2 4gig disks I've got configured to be mirrored using the hardware raid. (when doing the install you only see 1 4 gig disk) Now Mandrake 7.2 installs fine, and when using a boot floppy can see the controller etc... however when booting off of the controller, lilo comes up, it finds the kernel image and then stops at "unpacking the kernel..." I don't get any errors, it just hangs. I hooked up a regular scsi disk to one of the other Adaptec controllers but by the nature of the way the machine is layered out sda is the raid controller so the boot sector ends up on it anyway. My kernel works properly because it can access all the filesystems that reside on those disks, I just can't boot off of them. It feels like an issue with lilo... If anybody has experience with this I'd like to know what the solution would be. Thanks, Tim _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

HP LH Pro...
by Keller, Tim June 29, 2001

June 29, 2001

Probably a quick one, but neither google or I have sorted it out yet... I have a HP LH PRO with a AMI Megaraid controller in it. Connected to the controller are 2 4gig disks I've got configured to be mirrored using the hardware raid. (when doing the install you only see 1 4 gig disk) Now Mandrake 7.2 installs fine, and when using a boot floppy can see the controller etc... however when booting off of the controller, lilo comes up, it finds the kernel image and then stops at "unpacking the kernel..." I don't get any errors, it just hangs. I hooked up a regular scsi disk to one of the other Adaptec controllers but by the nature of the way the machine is layered out sda is the raid controller so the boot sector ends up on it anyway. My kernel works properly because it can access all the filesystems that reside on those disks, I just can't boot off of them. It feels like an issue with lilo... If anybody has experience with this I'd like to know what the solution would be. Thanks, Tim

1 0

Multiple IPs on one NIC
by Bill Mills-Curran June 28, 2001

June 28, 2001

I know it's possible to assign multiple IPs (at least for listening) to a single ethernet device. I _know_ I should read first and ask questions second, but I'm just _so_ lazy, and there hasn't been much traffic anyway. TIA, Bill

2 2

RE: Battlebots
by Benjamin Zack June 26, 2001

June 26, 2001

You can count me in. -Ben

1 0

Connecting USB device
by Michael Long June 26, 2001

June 26, 2001

I am running SuSE 7.0 and would like to use the USB version of SanDisk ImageMate for transfering pictures from my digital camera. When I try to mount the device I get the following: mount usbdevfs mount: usbdevfs already mounted or /proc/bus/usb busy mount: according to mtab, usbdevfs is already mounted on /proc/bus/usb I have tried to RTFM and found quite a bit of info but do not know how to pull it all together in such a way to mount my drive and get the pictures off of the CompactCard. Any hints on how to get this thing working would be a great help. Thanks, Mike

2 3