- WLUG - wlug.mailman3.com

Re: [Wlug] Considering Linux for Recording Studio
by luke macneil May 23, 2002

May 23, 2002

2 1

RE: [Wlug] Considering Linux for Recording Studio
by Keller, Tim May 23, 2002

May 23, 2002

definity check out "ultramaster"! Tim. -----Original Message----- From: Sands Fish [mailto:fishsands@yahoo.com] Sent: Thursday, May 23, 2002 10:06 AM To: wlug(a)mail.wlug.org Subject: [Wlug] Considering Linux for Recording Studio Hey guys, I'm about to acquire an Intel 1U PIII-650 256MB 10gig server, used (racked & left) for $250, (*cheer*), and I had intended to use it for my audio recording purposes. My first idea was ProTools and Win2K on it, but as I'd always love a reason to go full Linux, I wondered if there was a quality, (hopefully free), recording/audio editing software option out there. Suggestions would be appreciated! :) -Sands _______________________________________________ "daddy, what does 'formatting hard disk' mean?" __________________________________________________ Do You Yahoo!? LAUNCH - Your Yahoo! Music Experience http://launch.yahoo.com _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

2 1

Streaming audio from sound card...
by RB May 18, 2002

May 18, 2002

Any recommendations on what to use as a server app to stream audio from a sound card input? I'm looking to send an MP3-encoded stream from a police scanner radio over an internal network. I need to be able to use WinAmp and XMMS as clients. Been searching around and see lots of choices but looking for recommendations on a simple and stable solution. Would prefer a non-GUI server app so I can use a low-end machine but that's not absolutely necessary. Thanks! -- Rob -= rb(a)millbury.net =-

3 2

REMINDER: Meeting Wed, May 15th
by Andy Stewart May 16, 2002

May 16, 2002

HI everybody, This is a reminder about the upcoming WLUG meeting to be held this Wednesday evening, May 15th, at 7:00 PM in Kinnicutt Hall on the WPI campus. At this meeting, Andy Stewart will give a short presentation about his recent experiences with PLIP (Parallel Line Internet Protocol). The Linux PLIP software allows the user to connect two computers together via their printer ports. A network is run between the parallel interfaces. If you ever wanted to build a cheap, quick (as in rapid setup), and dirty point-to-point network that actually functions, this is it. If two people would like to bring their laptops, I'll bring the cable and we can try a live demo. Be sure you have parport, parport_pc, and plip compiled as modules. My cable has male DB25 connectors. As I don't expect the PLIP presentation to be lengthy, if there are others who would like to do a quick presentation, please let me know. Afterwards, we'll visit the Boynton Restaurant for pizza and beer. All are invited to attend. See ya later! Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

3 2

driftnet
by Bill Mills-Curran May 16, 2002

May 16, 2002

I just installed driftnet (http://www.ex-parrot.com/~chris/driftnet/) on a whim, but I can't seem to get it to show me any graphics, and I'm fairly sure there is some going by. I'm running RedHat 7.1. Here's the command I'm running as root: ./driftnet -v -i eth0 I get a blank pop-up, and the command window shows that it's seeing traffic. TIA, Bill

1 1

RE: [Wlug] Locked up
by dibb_jim＠emc.com May 15, 2002

May 15, 2002

Regarding the IDE hard drive going bad... can you elaborate more on the symptoms? I've been trying to track down system instability on one of my systems which is running *cough* XP pro. I think I've traced it down to a bad hard drive, but I'm curious what symptoms you were seeing. Thanks. -----Original Message----- From: Andy Stewart [mailto:andystewart@attbi.com] Sent: Tuesday, May 14, 2002 8:14 AM To: wlug(a)mail.wlug.org; Gregory Avedissian Subject: Re: [Wlug] Locked up On Tuesday 14 May 2002 01:05, Gregory Avedissian wrote: > Still? I don't know, as I've never logged in remotely. Can I do this > from a friend's house next time it locks up? I'm not set up as a server, > and I don't really know what I'd need to change to do that. > > Could I do it with the parallel port connection that Andy is going to > talk about on Wednesday? > > Greg HI Greg, If you setup the parallel port connection between two computers (A and B) and insure that its working, when computer A locks up, you could try logging in over the parallel port connection from computer B to see if it really locked up or simply not responding to keyboard/mouse input. Lockups really stink. It took me several weeks to finally figure out my problem (an IDE hard drive slowly going bad). Memtest is great - definitely try it out. I would also recommend the Cerberus Test Control System program (ctcs). It is the program used by VA Linux to burn in their hardware. It does some *really* stressful things to the hardware and will find anything that is flaky (supposedly). Later, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

3 2

Re: [Wlug] REMINDER: Meeting Wed, May 15th
by Andy Stewart May 15, 2002

May 15, 2002

HI gang, I have one person who has confirmed that he will bring his laptop to the meeting for a PLIP demonstration. Is there one other person who will do the same? Now, keep in mind that although one group member who shall remain nameless is notorious for yanking on power cords (most especially while they are still in use), it should be safe to be tethered to his laptop with my LapLink cable for the demo at the meeting. You have been warned! :-) Later, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

1 0

Locked up
by Gregory Avedissian May 14, 2002

May 14, 2002

Sometimes my computer locks up completely, so that neither the mouse nor the keyboard will work. I'm running SuSE 7.2 on an Athlon 1.2GHz/Shuttle Spacewalker AK12A, 256M memory. It seems to happen when I'm in a chat room. Running Mozilla 0.9.9 with recent Java plugin, also running Yahoo Instant Messenger, and it seems like things were loading very slowly in the chatroom all the times this had happened. I'm on a dialup line, so when I say slow, I mean like go-and-make-tea slow. Otherwise, the connection is ok (46.6K) when loading other pages. ctrl-alt-backspace does nothing, alt-F2,3 etc. does nothing, same for ctrl-D, ctrl-C, ctrl-Z, ctrl-alt-Fx. I had to hit the kill switch. This last time, it wasn't too bad, but the time before this, rebooting to linux was pretty scary. This only happens once every couple of weeks. I'm suspicious of the keyboard, because it persisted once when I rebooted to win98, then it cleared when I rebooted once more, first wiggling the wire where it goes into the keyboard. Does it sound at all like a software problem, or should I just ignore it and replace the keyboard? And is there some other way to bail out that I haven't tried? Thanks, Greg

6 7

Compaq auction
by Michelle Vadeboncoeur May 11, 2002

May 11, 2002

http://www.dovebid.com/Auctions/AuctionDetail.asp?AuctionID=1260 Compaq out of Houston, TX is having a webcast auction on 5/14 of a bunch of their stuff (check the equipment catalog), ranging from the office TVs and video projectors, to monitors, servers, storage arrays, desktops, individual cards, etc. Looks like some nice stuff. 8) I thought that you guys might be interested in perhaps picking up something, hopefully on the inexpensive side. Sorry for the late notice, though. -- --==*==-- --==*==-- Michelle R. Vadeboncoeur --==*==-- --==*==-- mrv(a)kluge.net: http://www.kluge.net/~mrv/

1 0

2 month + Linux Kernel consulting job
by Greg Donovan May 9, 2002

May 9, 2002

Dear WLUG, Thank you for allowing me to send this communication to your members. Optimal Engineering Partners provides embedded software and hardware development expertise within the communications, wireless, storage, and medical industries. Cumulatively the founding employees of Optimal Engineering possess many years of knowledge and contacts within these sectors, and the extent of our expertise within this space will be evident in the quality and responsiveness of the services we provide. We are seeking a consultant to perform some work for a customer of ours leveraging Linux kernel and SCSI skills. It is a two month+ assignment with a customer here in the Boston area. The work would be performed full time on our customer's site. Here is a brief description of the work: Our client is completing a port of Linux 2.42 to their fault tolerant platform and need assistance in finishing the effort. Must have strong debugging skills, storage SCSI or Fiber Channel and Linux kernel experience. Linux SCSI is a major plus. Please feel free to contact me if you or someone you know might be a match for this role. We pay a generous referral fee. Thank you. -Greg Greg Donovan OPTIMAL ENGINEERING PARTNERS "Resources and Expertise for Embedded Systems Development" (978) 256-1113 ext 103 gdonovan(a)optimaleng.com

5 9