- WLUG - wlug.mailman3.com

xcdroast
by Bill Mills-Curran May 28, 2004

May 28, 2004

I'm not much of a CD burner. I've used xcdroast to copy CD's, but I'm having problems getting it to use files from my hard drive. In fact, I can't even get it to look at my hard drive. What's the trick? Thanks, Bill

5 7

Web Contractor needed
by Evans, Robert May 28, 2004

May 28, 2004

FYI: Temporary Job opportunity. If interested, please contact the person listed below directly. - Bob Evans > Subject: job desc > > The Town of Stow, MA is looking for a contractor to work on the town's web > site (www.stow-ma.gov) Required skills include PHP and mySQL, CSS and HTML. > Build web-based forms with proper security for entering data, fix bugs, add > small amount of functionality, document architecture. Begin work immediately, > up to 40 hours/week through June. > > Send resume and qualifications to Anne VanTine, 978-562-4733, stowtv(a)stow-ma.gov.

1 0

*&(^$%^# Adaptec controller...
by Andy Stewart May 27, 2004

May 27, 2004

HI all, I have an Adaptec 29160N which for reasons unknown refused to boot my hard drive directly. I put in the DVD and that booted, which then booted the hard drive, and Linux came up. Today, I decided to fix this problem. I updated the BIOS on the 29160N, thinking that was the problem. On the computer in the cellar, it successfully booted a 4.7GB SCSI drive. Success(!), or so I thought. When I put the 29160N back into the "good" computer, it wouldn't boot from any hard drive. I suspected that the 18GB and 36 GB drives might be too new for the 29160N. To make a longer story short, if "enable booting from CD" *and* "enable booting from disk" are both simultaneously enabled, no disk booting occurs. By turning off "enable booting from CD", one can succeed in booting from a hard disk. Stupid, idiotic firmware programmer from Adaptec ought to be shot... Remember this so you don't waste 2 hrs on a rainy afternoon figuring this out. :-) Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

2 1

GNHLUG quarterly meeting to be held at USENIX Technical Conference
by Jon maddog Hall May 24, 2004

May 24, 2004

Hi, I have been thinking about having the quarterly meeting of GNHLUG down in Boston at the USENIX Technical conference. This meeting would not only be open to all members of GNHLUG, but also members of BLU (the Boston Linux User's group, www.blu.org) and the Worcester Linux User's Group (www.wlug.org) I have contacted USENIX and they have a room for us on Thursday, July 1st from 7-9 P.M. EDT. Later that evening Ted Ts'o and I will be leading a more formal Linux BoF from 9-11. Both meetings will be at the Boston Marriott Copley Place. I am arranging a speaker now, but I did want you to at least hold that evening open for what should be an interesting quarterly meeting. md -- Jon "maddog" Hall Executive Director Linux(R) International email: maddog(a)li.org 80 Amherst St. Voice: +1.603.672.4557 Amherst, N.H. 03031-3032 U.S.A. WWW: http://www.li.org Board Member: Uniforum Association, USENIX Association (R)Linux is a registered trademark of Linus Torvalds in several countries. UNIX is a registered trademark of The Open Group in the US and other countries.

1 0

LTSP as a means of recycling old PCs...
by Bill Smith May 23, 2004

May 23, 2004

There's a post on Slashdot talking about LTSP... (Yeah, I posted it... <g>) The link is http://slashdot.org/article.pl?sid=04/05/22/223425&&mode=thread&tid=126&tid… There's one comment that really drives the point home: #9227112 ... Anyway, I know that there was a recent WLUG meeting about LTSP, so I thought this might be of interest. -- William Smith wsmith(a)chezsmith.com Fall River, MA

2 1

Creating web content with Linux
by Andy Stewart May 22, 2004

May 22, 2004

HI everybody, I gave my "Introduction to Linux" presentation to a group of Internet professionals in Hopkinton last night (http://www.ip495.org) I was asked a question which I could not definitively answer since I am not a creator of web pages. The questions are: What tools are available on Linux for creating web content? Is there something akin to FrontPage for Linux? Sure, for simple HTML, any text editor will do. I've even used OpenOffice, but it feels crude to me (maybe I just don't know how to use it properly). GIMP could be used to create still images. Beyond that, I'm lost. Do I smell a topic for an upcoming meeting ? Thanks, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

7 6

mouse scroll wheel
by Gregory Avedissian May 22, 2004

May 22, 2004

I did a new install of SuSE 8.2, and my mouse scroll wheel no longer works. Previous install was on top of 7.2. Current XF86Config mouse section is identical to the one that worked. It also works when I boot into debian. I've tried adding the imwheel command to .xinitrc, but that didn't help. Maybe I don't understand the -W option. What's a GPM fifo? Is that the script file that starts gpm? If it is, I tried that, and it didn't work, either. Also tried adding and removing gpm from run-level services. Any ideas? Thanks, Greg

1 0

RE: [Wlug] Comcast dolts (mail server problem?)
by Keller, Tim May 21, 2004

May 21, 2004

Your theory is absolutely correct. We implement our SMTP systems in the same way. We've got 3 boxes behind a DNS round robin. Tim. -----Original Message----- From: Andy Stewart [mailto:andystewart@comcast.net] Sent: Friday, May 21, 2004 8:53 AM To: Worcester Linux Users Group Subject: [Wlug] Comcast dolts (mail server problem?) HI all, In Kmail, when I configure the email sending parameters, I fill in "smtp.comcast.net" as instructed. In the security section, there's a selection for "check what the server supports". I do this and it returns "encryption TLS, authentication method CRAM-MD5". Well, it does this *most* of the time. Once in a while, it returns "encryption SSL". Keeping the above in mind, I periodically get errors when sending email. The error is "authentication failure". However, if I immediately resend, it goes through just fine (sometimes after repeated resends). Note also that smtp.comcast.net maps to 4 different IP addresses. My theory is that the Comcast servers are not all using the same authentication method, and when I catch one that's not setup the same as my email program, I don't authenticate and thus cannot send email. Does this theory seem reasonable? I tried to explain my theory to Comcast tech support who asked me to reboot Windows, and then complained about my unsupported email client. When I asked to speak to the system administrator for the email server, they refused. Comcast can't get into their heads that there might be an intelligent user or two using their service, and that all problems aren't the fault of the user. Sigh...any thoughts ? Thanks, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

3 2

Comcast dolts (mail server problem?)
by Andy Stewart May 21, 2004

May 21, 2004

HI all, In Kmail, when I configure the email sending parameters, I fill in "smtp.comcast.net" as instructed. In the security section, there's a selection for "check what the server supports". I do this and it returns "encryption TLS, authentication method CRAM-MD5". Well, it does this *most* of the time. Once in a while, it returns "encryption SSL". Keeping the above in mind, I periodically get errors when sending email. The error is "authentication failure". However, if I immediately resend, it goes through just fine (sometimes after repeated resends). Note also that smtp.comcast.net maps to 4 different IP addresses. My theory is that the Comcast servers are not all using the same authentication method, and when I catch one that's not setup the same as my email program, I don't authenticate and thus cannot send email. Does this theory seem reasonable? I tried to explain my theory to Comcast tech support who asked me to reboot Windows, and then complained about my unsupported email client. When I asked to speak to the system administrator for the email server, they refused. Comcast can't get into their heads that there might be an intelligent user or two using their service, and that all problems aren't the fault of the user. Sigh...any thoughts ? Thanks, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

3 3

GPG - web of trust
by Andy Stewart May 21, 2004

May 21, 2004

HI all, I recently received an email from Jeff Moyer on the WLUG list. Kmail noted that the digital signature was valid but untrusted (I thought that feature was broken - why is it suddenly working??). I had downloaded Jeff's key from the key server. What establishes this key as trusted? Certainly, if I had signed Jeff's key myself, I would trust it, but in this case, I did not. I also don't know anybody who has signed Jeff's key. Do I need to place a personal value on keys which I've downloaded? Hypothetically, what if I downloaded it from some rogue server masquerading as the real thing? What I suspect is that if I signed Joe Blow's key, and Joe had signed Jeff Moyer's key, and I had placed a value on Joe's ability to properly verify keys, that there would be some implication about the goodness of Jeff's key. Correct? In my situation, I suspect that there are too many degrees of separation between keys which I trust and Jeff's key and its signers. How does this gap get closed? Thanks, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

3 3