- WLUG - wlug.mailman3.com

Re: [Wlug] Next meeting?
by James Gray Jan. 15, 2008

Jan. 15, 2008

All of the meetings for 2008 have been scheduled and are on wlug.org (via the WLUG Meetings link at the top of the page). No topic has been announced yet for this meeting. January 17, 2008 – Thursday Access Grid Room Lower Wedge Morgan Hall 7:00 PM Topic: TBD Finally a question on this list I can answer. :-) -James > > Hey... Any idea when the next meeting is going to be and what it's going to be about? >

4 4

Re: [Wlug] Reminder: Next Meeting: Thursday, Jan 17, 7:00 PM
by howard＠howardwhite.net Jan. 15, 2008

Jan. 15, 2008

I have an XO laptop and might even go to my very first WLUG meeting (after having been on the mailing list for a couple of years.) I would also like to see how the mesh networking looks in action. Howard White Hudson

1 0

Reminder: Next Meeting: Thursday, Jan 17, 7:00 PM
by Andy Stewart Jan. 15, 2008

Jan. 15, 2008

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 HI Everybody, The topic of this upcoming meeting will be the XO laptop from the One Laptop per Child project. I'll lead the discussion with a demonstration of the hardware and software features of the laptop. If you have an XO laptop, please bring it, as I haven't yet had a chance to try out the mesh networking, and it would be fun to try in a live demo. Remember: Thursday, Jan 17th, 2008, 7:00 PM on the WPI campus in Worcester, MA USA, in the Access Grid room on the ground floor of Morgan Hall (ok, its the wedge between Morgan and Daniels). Afterwards, we'll head out of pizza at a restaurant chosen by the group. See ya there, Andy - -- Andy Stewart, Founder Worcester Linux Users' Group (http://www.wlug.org) Chelmsford Linux Meetup Group (http://linux.meetup.com/393) Amateur Radio: KB1OIQ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFHjBIZHl0iXDssISsRAowwAKCEDxPHflpHMXd55n4d+VxB7Y1cAgCdEUAy jOf536AyHVG5IRnJzqfqH0E= =r+i2 -----END PGP SIGNATURE-----

1 0

CRT's
by Mike Leo Jan. 15, 2008

Jan. 15, 2008

I have a young friend who is looking for a second/third monitor. Any one have any unused old crt's they are willing to part with? Thanks Mike

7 6

Fedora Disapointment
by dulsi＠identicalsoftware.com Jan. 12, 2008

Jan. 12, 2008

I understand that my laptop is old. Every time I've upgraded Red Hat/Fedora, I've liked the new system until Fedora 8. I didn't always upgrade. I skipped Fedora 7 since the live CD didn't boot on my laptop but Fedora 6 ran great. Fedora 8 is a dog with my small amount of memory (256M). I'm thinking I'll buy more memory but it disappoints me that Fedora runs poorly with 256M. (I would buy a new laptop but I'm just not impressed with the current offerings.) Dennis Payne dulsi(a)identicalsoftware.com

3 3

Re: [Wlug] Next meeting?
by Jamie Guinan Jan. 12, 2008

Jan. 12, 2008

On Fri, 11 Jan 2008, Andy Stewart wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > James Gray wrote: > > All of the meetings for 2008 have been scheduled and are on wlug.org > > (via the WLUG Meetings link at the top of the page). No topic has > > been announced yet for this meeting. > > > > January 17, 2008 � Thursday > > Access Grid Room > > Lower Wedge > > Morgan Hall > > 7:00 PM > > Topic: TBD > > > > Finally a question on this list I can answer. :-) > > -James > > Hi Gang, > > Yes indeed, that's the date for the next meeting, and there is no > speaker scheduled (yet) for this meeting. Any volunteers? > > Failing that, I doubt folks would be interested in seeing a real XO > laptop. ;-) I could bring one if people are interested. That would > give me incentive to learn how to use most of the programs. However, > there isn't any VGA output, so I don't know how to get the image on the > screen where an audience could see it. VNC perhaps? I'm not sure. I'll > play with it over the weekend. For external connections, the machine has > USB ports, wireless (WEP only), microphone and speaker jacks. I hope you're bringing enough for everybody. :) For VNC, if you can get it (I hope you'll spend a minute or two on the packaging system) or build it, "x11vnc" requires virtually no setup and lets you export your current X session to a VNC client, http://www.karlrunge.com/x11vnc/ -Jamie > Later, > > Andy > > - -- > Andy Stewart, Founder > Worcester Linux Users' Group (http://www.wlug.org) > Chelmsford Linux Meetup Group (http://linux.meetup.com/393) > Amateur Radio: KB1OIQ > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.2 (GNU/Linux) > Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org > > iD8DBQFHh/pKHl0iXDssISsRApbdAJwN+jNtjRnq+fbTUYo0v8G8k0jHTACfS1JC > mvveJr9PcqQtIn8TKrK7vfI= > =qGnh > -----END PGP SIGNATURE----- > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

1 0

Next meeting?
by Tim Keller Jan. 11, 2008

Jan. 11, 2008

Hey... Any idea when the next meeting is going to be and what it's going to be about? Thanks, Tim. -- I am leary of the allegiances of any politician who refers to their constituents as "consumers".

1 0

CRT
by Mike Leo Jan. 7, 2008

Jan. 7, 2008

thanks to all who responded to my request for a CRT. I have one now that will most likely work. If not, i'll ping those who responded and make arrangements. Happy New Year!

1 0

Re: [Wlug] CRT's
by Mike Leo Jan. 5, 2008

Jan. 5, 2008

Stephen, where are you located? ----- Original Message ---- From: Stephen Daukas <scd(a)daukas.com> To: Worcester Linux Users Group <wlug(a)mail.wlug.org> Sent: Friday, January 4, 2008 8:38:42 PM Subject: Re: [Wlug] CRT's I two 17" Trinitons and one 17" ViewSonic... On Jan 4, 2008 7:11 PM, Mike Frysinger <vapier(a)gentoo.org> wrote: On Friday 04 January 2008, Mike Leo wrote: > I have a young friend who is looking for a second/third monitor. > > Any one have any unused old crt's they are willing to part with? i have at least one ive tried to get rid off ... pretty sure it's 17" dell trinitron crt and still works. -mike _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug -- Stephen C. Daukas Engineer, Geoscientist, Environmental Analyst ________________________________________________ - Please, before printing, think about the environment -

2 1

Getting the Edimax ew-7108pcg working on Xubuntu 6.06 LTS
by Adam Keck Jan. 4, 2008

Jan. 4, 2008

Hello All, I found this card on newegg.com for cheap money and the company claimed Linux support, so I got it. So far, I have it working on a WEP test network, but the driver package does come with WPA-supplicant bits. I assume that works as well. Folks online claim it works out of the box on Ubuntu 7.10, but my laptop didn't do well with the newer Xubuntus, so I had to make do. Note, out-of-the-box, the rt61 driver provided by Xubuntu 6.06 LTS throws a stack trace and can wedge your system. I found that you need to build the company's rt61 driver. Here was my procedure for 6.06 LTS: 1) Install gcc and friends,if you haven't already. 2) Update to the latest kernel packages. 3) Install the linux-header packages for your platform (I used the 386 packages). 4) Download the driver zip for the ew-7108pcg from the Edimax website's support area, unpack it, and the unpack the tar ball inside. 5) cd into the IS_Linux_STA_6x_D_1.1.1.0 directory 6) run make 7) Ignore all the compiler warnings ;) 9) run sudo make install 10) Add "alias ra0 rt61" to /etc/modules.conf or into your preferred location in /etc/modules.d if it wasn't automatically added. 11) Add correct bits to /etc/network/interfaces So, that being said (I am typing this email via the card now): 1) On boot, the card comes up, but does not go online. Ifconfig has configured the interface, but iwconfig shows no essid or key configured. 2) I opened the Applications->System->Networking tool. The tool shows the interface as active. I can "activate/deactivate", but likewise iwconfig shows no configuration. I can only bring the interface up via running "sudo ifup ra0". My wife's probably not going to go for that ;). Does anyone have any ideas about what plumbing I am missing to get automatic configuration? Thanks! -Adam

3 4