- WLUG - wlug.mailman3.com

Re: [Wlug] PXE 101 (summer school)
by Adam Keck May 22, 2007

May 22, 2007

<oops... replied off list, reposting> http://www.kernel.org/pub/linux/utils/boot/syslinux/ has the PXE server source that most distros use and http://syslinux.zytor.com/pxe.php talks about how to setup PXE, tftpd, and dhcpd (ISC). -Adam On 5/22/07, Doug Mildram <doug.mildram(a)mindspeed.com> wrote: > > doug> I too use PXE at work, with some success. > I could stand to learn more, and I sure as hell am still > looking for the "pxe daemon source code"...buried by intel?who? > while still running a redhat binary pxe daemon here. > > If every box had a bootable CD, it'd be easier to > just do that ...whether the CD is the stock CD, or one that > you customize a bit, which I've done; which is separate from > customizing the kickstart config file... > but realize as an opening comment, I may recommend that you > ignore PXE until you need it; ignore the boot-from-NIC potential. > > You're VERY welcome to torture me with questions, or visit Westboro > (work/days..it's quiet enough here) for some hands on confusion. > > It may be easier to LEARN PXE after learning "kickstart" without PXE. > e.g. booting from CD with > "linux ks=nfs:nfsserverip:/path/to/yourconfigfile.cfg" > and the .cfg file has MORE info like > ....some intro omitted..... > network ... (static,dhcp...it can install static > while USING a temp-dhcp installaddr) > part .... (disk layout) > authconfig ... ( --enablenis is my option) > nfs --server servername-or-ip --dir /path/releasedir > skipx (no X, dumb terminal consoles best for servers, right?) > %packages... > ...... > % post > exec > /KICKSTART.log 2>&1 > echo "hello..." > mkdir /customdir > mount nfsserver:/exporteddir /customdir > ( grab things, even edit files in / ....) > chkconfig --level 345 ntpd on > chkconfig --level 345 nfs on > ..............and so on. Tends to be a few hundred lines long. > > PXE does all this, but without the CD...and with more flaky results > depending on NIC cards, mostly, i think...I find it > just complicated enough to confuse me, > and just odd enough to NOT work in some cases. > > Challenges: 1) can't find the source to the pxe daemon, > which seems to have fallen OFF of the distros. > I feel "stuck" running a redhat9 binary (which works usually-for-me > on a redhat3-or-4 based system, just copying /usr/sbin/pxe > and firing it up manually (it often crashes after getting its job done) > > 2) complex dependencies. It needs > 2a) DHCP server, can be your existing one > 2b) TFTP server (this part is NOT complex, after you > learn some of the bootfile/dir layout) > as well as the (nfs,ftp,youdecide) server to grab packages from. > > What's confusing is how the PXE daemon and DHCP daemon play together. > When my boot fails, the error whines about DHCP even when PXE is the > problem. > >

1 0

Re: [Wlug] It boots. Now what?
by sageman＠WPI.EDU May 22, 2007

May 22, 2007

> Message: 1 > Date: Tue, 22 May 2007 09:16:18 -0400 > From: ken jones <kjones(a)ziplink.net> > Subject: [Wlug] It boots. Now what? > To: WLUG <wlug(a)mail.wlug.org> > Message-ID: <4652ED22.5090802(a)ziplink.net> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > I would like to get X11 services. I did an "emerge xterm". Here's what > happened. > ------------start snip------------- > (chroot) livecd proc # emerge xterm > Calculating dependencies | > !!! All ebuilds that could satisfy ">=x11-proto/xproto-7.0.6" have been > masked. > !!! One of the following masked packages is required to complete your > request: > - x11-proto/xproto-7.0.7 (masked by: ~sparc keyword) > - x11-proto/xproto-7.0.10 (masked by: ~sparc keyword) > - x11-proto/xproto-7.0.9 (masked by: ~sparc keyword) > > For more information, see MASKED PACKAGES section in the emerge man page > or > refer to the Gentoo Handbook. > (dependency required by "x11-libs/libX11-1.1.1-r1" [ebuild]) > --------------end snip---------- > > What do I make of this? > > Another problem. My livecd prompt and my chroot prompt both see my > ethernet card, eth0. However my new boot does not see the card. Ideas? > > Ken Jones Ken, Pulling in xterm, it needs libX11, which, in turn, is pulling in xproto. For the sparc, a masked version of xproto seems to be required. This masking with the "~" is just saying it's in the "testing" set of packages, but it's not hardmasked (it would mention it if it was), meaning it *should* be stable. Regardless, you need the "unstable" version in order to get xterm. There's a number of ways to deal with this, but the suggested way is to add the necessary files, one by one, to /etc/portage/package.unmask. You can do this by adding a line with "x11-proto/xproto ~sparc", or, even better, using the flagedit utility (which you must first "emerge flagedit" to get), and just do: "flagedit x11-proto/xproto +~sparc". [http://damz.net/flagedit/] More info on masking: http://gentoo-wiki.com/Masked

1 0

Re: [Wlug] [Fwd: Re: Multiple RS232 Com Ports...]
by Stephen Daukas May 22, 2007

May 22, 2007

Hi all! Lots of good info... I hadn't stopped to think about a terminal server! OK, lets see about answering some of the questions... - - - - - - Yes, cabling will be fun. The sondes are used for sampling water... The sondes we use are cylinders approximately 2.5 feet in length and about 3 inches in diameter (one, called "big Bertha", is about six inches in diameter) . One end has a data connection that uses a round, screw-on, water tight serial connector, and the business end has several sensors sticking out (optical, chemical, conductivity, a little propeller for mixing water to be sampled, etc., etc.), all within a screw-on cage that protects the sensors from stuff like rocks passing by in the current (fast currents equate to rather large rocks). The idea is to have a tank of water (fish tank, cooler, whatever) fitted with Plexiglas that has multiple holes through which the several sondes are positioned upright, data end pointing up, with a bunch of cables hanging in-place above each sonde - think of the device that sets the bowling pins in place at the end of the alley... Anyway, you place a bunch of sondes into the tank (that has circulating water being maintained at a precise temp, % dissolved Oxygen, and so on), plug each sonde into the cable available directly above it, and then go to the *insert Linux solution here* and initiate communication, data upload, and calibration routines. (By the way, the tank is just about done - its is being debugged as we speak.) After upload and calibration (using the water in the tank), configure each sonde for the next deployment (how often to sample, etc.), turn them off, unscrew the cables and screw on a waterproof cover, remove them from the tank, and place the entire sonde into another protective chamber (6" PVC pipe with holes drilled in a specific pattern and capped on both ends) for another few weeks in some river/lake/coastal location. - - - - - - Yes, I may be confusing myself regarding "I/O device driver" versus "driver" for the sonde... However, I'm pretty sure that all I need is a vanilla "RS232 device driver" that will "just work" for any number of "com" ports by allowing some vanilla terminal emulation package (preferably one that has scripting capabilities) to talk to multiple RS232 ports. I could be wrong about this, in which case I may need to write some code, or perhaps the manufacturer might be thinking of supporting Linux. I don't do the day-to-day instrumentation work, but I am supposed to worry about it none the less. In terms of the "sondes going to sleep", this is based on concerns expressed by the lab along the lines of "if you hook-up the sonde and let it sit too long, you have to start over because it will turn itself off." Also, I use the term "vanilla" a lot because the staff aren't computer types - this has to "just work" like any other tool in the lab. Dear lord - we are talking about biology types after all! ;-) (Unlike engineering/geoscience types!!) - - - - - - So, the other question was about the necessity of having certain signals present. Again, I'm told that the sonde needs all the signals present in a DB-9. I'm guessing this may have more to do with not really knowing for sure and erring on the side of caution, but since there is hardware available that will do this and I can't spend all of my time chasing this down, I'll assume the information I'm getting on this topic is correct. (Biologists not withstanding.) I think this is where the multiport boards or a terminal server would come in... One of the replies mentioned writing a script, and that is what I was thinking about... Specifically, I was wondering if it could be as simple as a script sending the proper bit patterns to get the sonde to do the right things, pipe the serial data through the script and append the data to a file, and s on... (Was that you, John?) - - - - - - - Anyway, I'll have to take a look at the product references mentioned and contemplate what I might need to do in the world of scripting... I haven't heard back from the manufacturer yet, but I'm hoping this will turn out to be a simple project when all is said and done!! Also, I haven't used a terminal server before, so that should be interesting as well. Thanks! If you have any more thoughts, please let me know!! Steve On 5/21/07, Stephen C. Daukas <scd(a)daukas.com> wrote: > > > > -------- Original Message -------- Subject: Re: [Wlug] Multiple RS232 > Com Ports... Date: Mon, 21 May 2007 15:44:09 -0400 From: John Stoffel > <john(a)stoffel.org> <john(a)stoffel.org> Reply-To: Worcester Linux Users > Group <wlug(a)mail.wlug.org> <wlug(a)mail.wlug.org> To: Worcester Linux Users > Group <wlug(a)mail.wlug.org> <wlug(a)mail.wlug.org> References: > <4650752A.1020203(a)daukas.com> <4650752A.1020203(a)daukas.com> > <18001.54171.525952.976484(a)stoffel.org><18001.54171.525952.976484(a)stoffel.org> > <20070521181244.GH4900(a)angus.ind.WPI.EDU><20070521181244.GH4900(a)angus.ind.WPI.EDU> > > Chuck> On Mon, May 21, 2007 at 01:15:07PM -0400, John Stoffel wrote: > >> darn good things about the Cyclades stuff as well. Stay away from the > >> Legacy Avocent (who bought Cyclades...) serial port stuff, it's crap. > > Chuck> Hmm I have to disagree here. We have the Avocent/Cyclades ACS line > Chuck> and are very happy with them. They run Linux inside and support many > Chuck> connection protocols, like Telnet, SSH, Reverse Telnet, Bidirectional, > Chuck> etc. Full RTS/CTS control lines including DTR are available. They > Chuck> support console logging to RAM, PCMCIA flash card, or remote syslog. > > Chuck> Perhaps you are referring to their older Cyclades TS line. > > I'm talking about the old Avocent designed CPS line of crap. You're > talking about the Cyclades designed stuff, including the TS and the > ACS. > > I've got an ancient Cyclom-Y ISA 8-port serial card in my main home > computer and it's been working great for for years. Wish I could > afford the newer stuff. > > John > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > >

2 1

Re: [Wlug] Setting up PXE/TFTBoot
by Mike Leo May 22, 2007

May 22, 2007

no, but i bet these guys have some doc's for you http://www.ltsp.org/ ----- Original Message ---- From: Tal Cohen <wlug(a)cohen123.com> To: wlug(a)mail.wlug.org Sent: Tuesday, May 22, 2007 9:34:32 AM Subject: [Wlug] Setting up PXE/TFTBoot  I know that this is not new technology….but I am having quite a time figuring this out. I was hoping that you guys could give me a hand. In my office, I want to setup a system that will provide a boot image over the network so that I can remotely setup and configure new servers. I am running Crux2.3. Does anyone have experience setting up remote booting systems? Thanks, Tal _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

Setting up PXE/TFTBoot
by Tal Cohen May 22, 2007

May 22, 2007

I know that this is not new technology..but I am having quite a time figuring this out. I was hoping that you guys could give me a hand. In my office, I want to setup a system that will provide a boot image over the network so that I can remotely setup and configure new servers. I am running Crux2.3. Does anyone have experience setting up remote booting systems? Thanks, Tal

2 1

Multiple RS232 Com Ports...
by Stephen C. Daukas May 21, 2007

May 21, 2007

Hi all! I'm wondering if anyone knows how many RS232 devices a "vanilla" Linux kernel can manage simultaneously. I'd like to be able to have up to 32 going at once, with data taken from each device written to its own file via the standard I/O subsystem. As far as I know, wouldn't Linux simply fork the appropriate number of driver threads to read as many RS232 ports as are attached with each device's stream written to a "/dev" file? Why do I want to do this? Glad you asked... I'm investigating an issue at work that involves our instrumentation lab having to upload/download/calibrate multiple sondes and have them ready for field deployment the next day. Currently, we can do three at a time and this takes about 8-9 hours providing everything goes well. The manufacturer's software application claims to supports the simultaneous upload/config of up to 32 sondes. The application will scan "installed" COM ports looking for recognizable sondes, and present those found to the user. Yes - this is a windows solution, so I first began looking for products that would play with Windows... I began looking for hardware solutions (PCI boards, break-out boxes, etc.) on the net and I found a few that will provide 16 DB-9 RS232 ports with full pin-out support as well as so-called "true" interrupt and FIFO support on the host (via their own custom Windows driver, no doubt). And then I started wondering about how to get all of this to work in a Windows environment where "IT" is the only group allowed to install software and otherwise configure a PC for most users whose biggest concern is email... All this got me thinking about avoiding the whole Windows issue and instead thinking about using Linux to take care of the RS232 part, with the newly created files moved to a Windows box (sneakernet to start with), with the normal post-processing of the data taking place as usual in the Windows environment the staff is used to... I'm hoping an "out of the box" distro will be able to handle say 16 RS232 ports and that Linux-based terminal emulation software is available to simultaneously handle those ports as well so I can capture the data using the appropriate protocols... Anyone know of a similar application using RS232 and Linux, or have some thoughts on this? Thanks! Steve

6 8

My Ultra sparc64 booted!!
by ken jones May 21, 2007

May 21, 2007

Thank you everybody for your help. My sparc64 finally booted. I used genkernel with the livecd cdrom's kernel 2617 /proc/config.gz. The last piece of the puzzle was getting fstab correct. Here is proof. -----------snip of uname -a ----------------------- kjones-sun2 / # uname -a Linux kjones-sun2 2.6.20-gentoo-r5 #3 SMP Thu May 17 13:58:22 Local time zone must be set--see zic sparc64 sun4u GNU/Linux kjones-sun2 / # -------------end snip-------------- I am not sure whether I learned anything specific to gentoo or to sparc64. I did learn that creating good open source documentation is difficult and that finding one's way through unfamiliar documentation is daunting. Thanks, again. Ken Jones

1 0

Fwd: Urgent Need for Software QA Instructor in Boston, MA
by albutler33＠netscape.net May 20, 2007

May 20, 2007

Hello all, Here's an opportunity I thought I'd pass along. Al Butler member of WLUG (haven't attended for quite a while) -----Original Message----- From: april01(a)o-s-tech.com To: albutler33(a)netscape.net Sent: Thu, 17 May 2007 8:59 PM Subject: Urgent Need for Software QA Instructor in Boston, MA Dear Aljerin, Open Systems Technology Services has an urgent need for an experienced Software Quality Assurance Instructor. Topics Software development life cycle-the product view Software configuration management (SCM) Software quality assurance Testing, validating and evaluating Special topics Planning, organizing, implementing and managing for SQA ------------------- Location: Boston, MA Date: June 11-13 Rate: $300 day/ 1099 Please let me know ASAP if you are available or know of someone who have experience teaching Linux. Classes will begin at 8am each day. Introduction to Linux, 3 days March 19th - 21st Linux Admin I, 5 days March 26th - 30th Linux Admin II, 5 days April 9th - 13t Rate: $500.00/day Job Description: . If you are available, email your resume (in word format) and availability with a contact number by 5:00pm, Monday, May 21, 2007. Thank you, April Washington Open Systems Technology Services, Inc. Email: April01(a)o-s-tech.com ________________________________________________________________________ Check Out the new free AIM(R) Mail -- 2 GB of storage and industry-leading spam and email virus protection.

1 0

ALSA hanging (Gentoo AMD64)
by Eric Stein May 18, 2007

May 18, 2007

Hi all, I have a very strange problem. Last night I updated all my packages and rebooted. On boot, alsasound started (boot runlevel), but while trying to restore mixer levels, it hung. I had to boot to a livecd and remove alsasound from boot to even start my system. I tried removing the old state file (in case the format changed and it was breaking because of that), but it wouldn't start without it. glamdring ~ # /etc/init.d/alsasound start * One of the files in /etc/{conf.d,init.d} or /etc/rc.conf * has a modification time in the future! * Loading ALSA modules ... [ ok ] * Restoring Mixer Levels ... * No mixer config in /var/lib/alsa/asound.state, you have to unmute your card! [ ok ] glamdring ~ # cd /var/lib/alsa/ glamdring alsa # l total 9 drwxr-xr-x 3 root root 152 May 17 16:26 ./ drwxr-xr-x 23 root root 568 May 17 03:17 ../ -rw-r--r-- 1 root root 0 May 17 16:26 .keep_media-sound_alsa-utils-0.9 -rw-r--r-- 1 root root 8073 May 17 12:50 asound.state.old drwxr-xr-x 2 root root 144 May 17 12:50 oss/ glamdring alsa # mv asound.state.old asound.state glamdring alsa # cd glamdring ~ # /etc/init.d/alsasound zap * Manually resetting alsasound to stopped state. glamdring ~ # /etc/init.d/alsasound start * Loading ALSA modules ... [ ok ] * Restoring Mixer Levels ... Which is where it hangs. Other alsa programs like alsaconf and alsamixer hang on startup, along with programs that attempt to use ALSA to output sound. I've tried reinstalling ALSA, I've tried revdep-rebuild, I've done modules-rebuild, and I'm at my wit's end. None of it seems to make sense, and Gnome isn't very happy about not having a sound output, so half of my GUI is missing. If anyone has some idea why this could be happening to me, please let me know. Eric

1 0

OT: HP9k E-class
by Desdinova May 17, 2007

May 17, 2007

A bit OT, if you can reply off-list, that's fine. I just figure there's probably guys who know about crappy old minis here. I've got an E25 and I'm planning to replace the internal scsi drive, it shouldn't be any big deal, but this *is* HP. Are there any gotchas on drive geometry or size that I should watch for? Take care, des

1 0