- WLUG - wlug.mailman3.com

RE: [Wlug] Recommended virtual private server (UML) hosting?
by Martin, Eric Sept. 17, 2004

Sept. 17, 2004

Vps? -----Original Message----- From: Mike Frysinger [mailto:vapier@gentoo.org] Sent: Friday, September 17, 2004 11:16 AM To: wlug(a)mail.wlug.org Subject: Re: [Wlug] Recommended virtual private server (UML) hosting? On Friday 17 September 2004 10:12 am, Bob George wrote: > I'm looking for an inexpensive vps hosting option (UML-based or > similar) that will allow me full control over server configuration. Are there any > that are recommended? i use bytemark (www.bytemark.co.uk) and they're pretty good ... had them for almost a year now ... -mike _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

2 1

RE: [Wlug] For discussion: A Worthy LUG project? (was gmail invit es)
by Keller, Tim Sept. 17, 2004

Sept. 17, 2004

There weren't any notes since I did a live demo... Tim. -----Original Message----- From: Michelle Vadeboncoeur [mailto:mrv@kluge.net] Sent: Friday, September 17, 2004 1:23 PM To: Worcester Linux Users Group Subject: RE: [Wlug] For discussion: A Worthy LUG project? (was gmail invites) On Fri, 17 Sep 2004, JONATHAN BEALL wrote: JB>Sorry, i missed the last meeting (High Holydays). i was really interested JB>in the Gentoo meeting, and had wanted to ask if anyone in the group is JB>currently running MythTV... JB> JB>I have an older sony viao, that has some mildly difficult hardware to JB>detect, and wanted to buy a videocard and make it a PVR. JB> JB>anyone have any thoughts? and a summary of the gentoo install? i JB>considered it once, but was scared away... =) taken from: http://www.wlug.org/slides.html <quote> Live Demo: A Linux Digital Video Recorder (April 16, 2003) Presented by Tim Keller WLUG member Tim Keller spoke about his experience building a digital video recorder using a video capture card and the Myth TV software. Tim mentioned that any video capture card which is supported by Video4Linux should work with Myth TV. (Other video capture cards may also work). As a video source, Tim used his Nintendo. </quote> very little more info is in this thread from the same time: http://paramount.ind.wpi.edu/pipermail/wlug/2003-April/002747.html Sorry, I wasn't at the last meeting, and notes from it doesn't seem to have made it to the wlug website yet... -- --==*==-- --==*==-- Michelle R. Vadeboncoeur --==*==-- --==*==-- mrv(a)kluge.net: http://www.kluge.net/~mrv/ _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

RE: [Wlug] Local service/repair recommendations
by Martin, Eric Sept. 17, 2004

Sept. 17, 2004

Had the same problem. I needed a 450W power supply. The video card is wicked intensive. I built a machine with similar specs...Try a PCI video card and it should work fine -----Original Message----- From: track(a)trackspace.com [mailto:track@trackspace.com] Sent: Thursday, September 16, 2004 5:30 PM To: wlug(a)mail.wlug.org Subject: Re: [Wlug] Local service/repair recommendations Thank you for all that responded. I'll try to summarize the answers to all the follow-up questions in one reply. When I turn the power on, nothing happens except a red LED on the motherboard lights up. The CPU fan doesn't spin, the computer doesn't beep - nothing (so no beeps or POST codes). The weird thing is that when I turn the power switch off, the LED stays lit for another 5-6 seconds. I'm not sure if that means anything though... In case it matters, the mobo is an Abit NF7 with a single DIMM of 512MB RAM (Crucial), an AMD Athlon 2400+ processor, an ATI Radeon 9600XT video card and it's powered by a 400W power supply. I bought all the parts from New Egg about 7 months ago, put it together and haven't had a single problem save for this. I've tried running it bare bones and moving the DIMM into a different slot. I have a spare computer, but the connector from the power supply doesn't seem to have the same plug as the one on my board. I don't have any extra RAM or a processor to try swapping things out with unfortunately. I've tried Googling the symptoms and the red LED on the mobo to no avail. It seems the only mention of the red LED problem was answered with the typical "check your connections, the mobo's fried, etc..." - no real diagnostics. I stopped in at a computer shop on 122A in Holden this afternoon and was quoted a $35 "bench fee" for taking a look at it and $75/hr to do any work. Like I said before, all the parts are still under warranty through New Egg and I'd happily send them back but I need to figure out what's not working. And I realize this is a Linux list and this is kind of off-topic. That being said, you folks are pretty bright and knowledgable so I figured I'd throw this out there. I do appreciate all the suggestions/comments so far. Thanks, Track _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

2 1

Re: Re: [Wlug] Local service/repair recommendations
by Clint Moyer Sept. 16, 2004

Sept. 16, 2004

The LED is +5V indicator. It's not likely a power supply problem. There are probably fans on the northbridge chip and CPU. Do they spin up? Bad memory can cause all kinds of flaky problems. Do you have a different stick you can try? At the very least, try booting with the DIMM slots empty and see if it behaves differently. If you'd like, contact me off list and I may be able to give it a try. I work for beer. ;) Clint > > From: track(a)trackspace.com > Date: 2004/09/16 Thu PM 05:30:21 EDT > To: wlug(a)mail.wlug.org > Subject: Re: [Wlug] Local service/repair recommendations > > Thank you for all that responded. I'll try to summarize the answers to > all the follow-up questions in one reply. > > When I turn the power on, nothing happens except a red LED on the > motherboard lights up. The CPU fan doesn't spin, the computer doesn't > beep - nothing (so no beeps or POST codes). The weird thing is that when > I turn the power switch off, the LED stays lit for another 5-6 seconds. > I'm not sure if that means anything though... > > In case it matters, the mobo is an Abit NF7 with a single DIMM of 512MB > RAM (Crucial), an AMD Athlon 2400+ processor, an ATI Radeon 9600XT video > card and it's powered by a 400W power supply. I bought all the parts from > New Egg about 7 months ago, put it together and haven't had a single > problem save for this. > > I've tried running it bare bones and moving the DIMM into a different > slot. I have a spare computer, but the connector from the power supply > doesn't seem to have the same plug as the one on my board. I don't have > any extra RAM or a processor to try swapping things out with > unfortunately. > > I've tried Googling the symptoms and the red LED on the mobo to no avail. > It seems the only mention of the red LED problem was answered with the > typical "check your connections, the mobo's fried, etc..." - no real > diagnostics. > > I stopped in at a computer shop on 122A in Holden this afternoon and was > quoted a $35 "bench fee" for taking a look at it and $75/hr to do any > work. Like I said before, all the parts are still under warranty through > New Egg and I'd happily send them back but I need to figure out what's not > working. > > And I realize this is a Linux list and this is kind of off-topic. That > being said, you folks are pretty bright and knowledgable so I figured I'd > throw this out there. I do appreciate all the suggestions/comments so > far. > > Thanks, > Track > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

1 0

gmail invites
by Brett Russ Sept. 16, 2004

Sept. 16, 2004

I have some to distribute. FCFS, serious inquiries only :-) BR

6 6

Re: [Wlug] Local service/repair recommendations
by Clint Moyer Sept. 16, 2004

Sept. 16, 2004

Start by trying to boot with the bare minimum components. Plug in only the CPU, one stick of RAM, video card, and keyboard. If you get absolutely nothing on the screen, try replacing memory first. > > From: track(a)trackspace.com > Date: 2004/09/15 Wed PM 07:21:44 EDT > To: wlug(a)mail.wlug.org > Subject: [Wlug] Local service/repair recommendations > > After unpacking my computer during a recent move, I have been having > serious hardware issues. Basically, the computer won't boot up and the > only output I get is a burning red LED on the motherboard when I turn it > on. I've checked all the connections, Googled my symptoms and even > reinstalled all hardware, piece by piece. Luckily, everything but the > processor is under warranty and I don't have a problems RMA'ing something > back to NewEgg. I just need to narrow the problem equipment down and I'm > the first to admit my lack of hardware knowledge. > > Can someone recommend a local shop that can at least diagnose the issue > and maybe run some hardware tests? Hell, I'd even be glad to pay someone > local on this mailing list to diagnose my problem. > > Anyways, I'm all ears... Thanks! > > --Track > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

1 0

Local service/repair recommendations
by track＠trackspace.com Sept. 16, 2004

Sept. 16, 2004

After unpacking my computer during a recent move, I have been having serious hardware issues. Basically, the computer won't boot up and the only output I get is a burning red LED on the motherboard when I turn it on. I've checked all the connections, Googled my symptoms and even reinstalled all hardware, piece by piece. Luckily, everything but the processor is under warranty and I don't have a problems RMA'ing something back to NewEgg. I just need to narrow the problem equipment down and I'm the first to admit my lack of hardware knowledge. Can someone recommend a local shop that can at least diagnose the issue and maybe run some hardware tests? Hell, I'd even be glad to pay someone local on this mailing list to diagnose my problem. Anyways, I'm all ears... Thanks! --Track

3 2

RE: [Wlug] Upcoming meeting
by Martin, Eric Sept. 15, 2004

Sept. 15, 2004

I'll give a go if its gonna be round table as well -----Original Message----- From: Ryan Caron [mailto:rcaron@WPI.EDU] Sent: Monday, September 13, 2004 11:46 AM To: wlug(a)mail.wlug.org Subject: Re: [Wlug] Upcoming meeting I too will talk about Gentoo in this round table format. Some lessons learned from my experience with Gentoo over the past year could prevent people from making the same mistakes that I did. Ryan Caron > Message: 3 > Date: Sun, 12 Sep 2004 20:58:28 -0400 > From: Andy Stewart <andystewart(a)comcast.net> > Subject: [Wlug] Upcoming meeting > To: "Worcester Linux Users' Group" <wlug(a)mail.wlug.org> > Message-ID: <200409122058.37105.andystewart(a)comcast.net> > Content-Type: Text/Plain; charset="us-ascii" > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > HI Everybody, > > Our next WLUG meeting will be held on Wednesday, Sept. 15th at 7:00 PM > in the > Access Grid room at WPI. Directions can be found on the WLUG website. > > This meeting's topic will be "Gentoo". You can find more info here: > http://www.gentoo.org/ > > We have a couple of people who have volunteered to bring in their > Gentoo > machines. I would encourage anybody who has used Gentoo to come and teach > those of us who are less familiar. > > Since nobody has (yet) volunteered to give a talk, I hope that enough > people > with Gentoo experience will be at the meeting, and we can have sort of a > "round table" (as it were) discussion. > > See ya there! > > Andy > - -- > Andy Stewart, Founder > Worcester Linux Users' Group > Worcester, MA USA > http://www.wlug.org > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.2.4 (GNU/Linux) > > iD8DBQFBRPC7Hl0iXDssISsRApOWAJ9wCT4gnoBL7ILSCba6DvjGf102ogCfbdKi > p3V/9ZylvDoWJTrSCRa9DPg= > =SI01 > -----END PGP SIGNATURE----- _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

2 1

linux vpn client?
by Keller, Tim Sept. 14, 2004

Sept. 14, 2004

I've done the obligatory googling and so far I've come up with snake eyes. I'm looking for a VPN client for linux that'll work with a SecurID. Thanks, Tim.

5 7

Upcoming meeting
by Andy Stewart Sept. 13, 2004

Sept. 13, 2004

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 HI Everybody, Our next WLUG meeting will be held on Wednesday, Sept. 15th at 7:00 PM in the Access Grid room at WPI. Directions can be found on the WLUG website. This meeting's topic will be "Gentoo". You can find more info here: http://www.gentoo.org/ We have a couple of people who have volunteered to bring in their Gentoo machines. I would encourage anybody who has used Gentoo to come and teach those of us who are less familiar. Since nobody has (yet) volunteered to give a talk, I hope that enough people with Gentoo experience will be at the meeting, and we can have sort of a "round table" (as it were) discussion. See ya there! Andy - -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFBRPC7Hl0iXDssISsRApOWAJ9wCT4gnoBL7ILSCba6DvjGf102ogCfbdKi p3V/9ZylvDoWJTrSCRa9DPg= =SI01 -----END PGP SIGNATURE-----

2 2