- WLUG - wlug.mailman3.com

Any complaints about Charter cable modems?
by Kingsbury, Michael July 15, 2001

July 15, 2001

Just wondering if anybody here has had any problems/complaints about the Charter cable modem services? -mike

5 6

Problem with network card
by Simoncini, Matthew July 11, 2001

July 11, 2001

Hi guys, This message is not actually a Linux based question, but is still "nix". I have recently installed Solaris 8 (for Intel) on a PC at work and am having problems connecting to the network. I think that the problem is related to the speed that the NIC is trying to use when connected to the LAN. I suspect this because the little green speed indicator for 100mb is illuminated (on the NIC) when the workstation is connected to the network jack. Here are some supporting details that I hope someone might find useful: Hardware: HP Vectra Vli8DT (733mhz) Solaris 8 for Intel 3com Etherlink XL PCI NIC ifconfig -a elxl0 flags=100843<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 inet 172.17.24.76 netmask ffffff00 broadcast 172.17.24.255 ether 0:1:3:68:1b:f3 netstat -rn Routing Table: Destination Gateway Flags Ref Use Interface -------------------- -------------------- ----- ----- ------ --------- 172.17.24.0 172.17.24.76 U 1 2 elxl0 224.0.0.0 172.17.24.76 U 1 0 elxl0 default 172.17.24.3 UG 1 0 127.0.0.1 127.0.0.1 UH 29 1897 lo0 If anyone can help or has similar experience, please give me a shout. I think I remember reading somewhere about a device driver file that can be changed to force the speed of the NIC. Anyone else ?? Thanks. Matthew

3 2

Determining speed of device...
by Keller, Tim July 11, 2001

July 11, 2001

Got a quick question... Other than looking in dmesg for what the driver reported the speed of the cable of the network device, does anybody know what utility or place in /proc that'll tell you what the speed of the cable connected to your machine is. Thanks, Tim.

2 1

Re: [Wlug] Any complaints about Charter cable modems?
by Rob July 9, 2001

July 9, 2001

Hi, I've had Charter for almost a year and have had no problems. Except my modem going last month.. that was the first real big problem. Like any ISP.. they have had a few outages here in Auburn, but they didn't last more than 2 hours. I had no problems getting my Linux (Mandrake)system working with it. Rob Mahlert --- "Kingsbury, Michael" <mkingsbury(a)avayactc.com> > wrote: >Just wondering if anybody here has had any problems/complaints about the >Charter cable modem services? > >-mike >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug _____________________________________________________________ Are You in the Atari-Users.Net's Links Engine? ---> http://www.atari-users.net

1 0

Re: [Wlug] linux on PDA
by Jeffry Smith July 3, 2001

July 3, 2001

Also try www.handhelds.org. Compaq sponsors the site, and they do a lot of ipaq work. jeff ----------------------------------------------------------------------- Jeffry Smith Technical Sales Consultant Mission Critical Linux smith(a)missioncriticallinux.com phone:603.930.9739 fax:978.446.9470 ----------------------------------------------------------------------- Thought for today: Old Testament n. [C programmers] The first edition of K&R, the sacred text describing Classic C. skip gaede said: >Hi Wes, > >Have you tried the net? I have a friend how has one and has managed to >do it. >Going to altavista and searching on {+ipaq +linux} returned 21,897 hits... > >--Skip > >Wesley Allen wrote: > >> Anyone out there able to give me a hand installing linux on an iPaq? >> _______________________________________________ >> Wlug mailing list >> Wlug(a)mail.wlug.org >> http://mail.wlug.org/mailman/listinfo/wlug >> >> > >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug >

1 0

linux on PDA
by Wesley Allen July 3, 2001

July 3, 2001

Anyone out there able to give me a hand installing linux on an iPaq?

2 1

Setting up cable modem (Charter)
by Thomas Carey July 2, 2001

July 2, 2001

4 3

Re: Re: [Wlug] Setting up cable modem (Charter)
by falken July 1, 2001

July 1, 2001

I am new to the Mass. area, but I use to be a Sr. Network Admin with Charter Communications. The question that I have is are you using Charter@home or Charter Pipeline? If it is Charter@home then you have to make some different changes in your setup. You have to add some domain information. It took a while to finally Linux DHCP to with with Charter@home but we were able to figure it out. If it is Charter Pipeline I will be willing to find you some contact information with one othe the Sr. Network Admins that I know. Tom > rpm -q pump > > pump is Red Hat's DHCP client. If the above command shows > output, then it > is installed. > > Could you post the output of "/sbin/ifconfig -a"? > > On Sat, 30 Jun 2001, Thomas Carey wrote: > > tcarey> I apologize if I confused anyone. One nic is a > Intel Pro > tcarey> 100+. the other nic is a 3COM 3C905C. I alternated > nics to > tcarey> see if maybe one was not loading. Dumb question. > How do I > tcarey> know if pump is installed? Please be patient, I'm > fairly > tcarey> new to Linux (but have used it in the past as a > web and > tcarey> FTP server). > > Charles R. Anderson <cra(a)wpi.edu> / > http://angus.ind.wpi.edu/~cra/ > PGP Key ID: 49BB5886 > Fingerprint: EBA3 A106 7C93 FA07 8E15 3AC2 C367 A0F9 49BB > 5886 > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug

1 0

Re: [Wlug] Setting up cable modem (Charter)
by Thomas Carey June 30, 2001

June 30, 2001

2 1

Re: [Wlug] Setting up cable modem (Charter)
by Peter Gutowski June 30, 2001

June 30, 2001

On 6/30/01 3:34 PM, Thomas Carey <tcarey70(a)hotmail.com> wrote: > >I know I have seen several posts in the past, but I need a little >information on setting up my cable modem through Charter. > >A little background information; > >Red Hat 7.1 installed. > >I have two nics installed, one static (192.168.1.1 internal scheme), >one DHCP (connected to the cable modem, the cable modem when installed >by Charter was assigned 192.168.100.1). > >On boot up eth1 fails (eth1 is fine on boot up). I know I am probably >missing some configuration somewhere. I know both nic's are working >fine. After the first failed boot up (on eth1) I switched the cards, >and the static nic was fine. I'm assuming you've made a minor typing mistake in the first sentence of the previous paragraph (otherwise very confusing) I'm assuming also that you're saying that the internal card boots OK and the card hooked to the cable modem is failing: - be sure the driver module for the cable modem eth card is loaded (e.g 'insmod 3c90x' or whatever for your card ) - be sure the 'pump' package in installed > >Any ideas? If any of the above doesn't help, please give more info re: type of cards, excerpts of log files showing error messages, etc. config files, (e.g./etc/sysconfig/network-scripts/ifcfg-eth1) > >TIA > >Tom Carey >Get your FREE download of MSN Explorer at http://explorer.msn.com ><http://explorer.msn.com> >_______________________________________________ Wlug mailing list >Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0