- WLUG - wlug.mailman3.com

Re: [Wlug] 3d printing question.
by Tim Keller Oct. 9, 2017

Oct. 9, 2017

The "Authorization" is actually from my wife. This is going to be a personal printer to go in my workshop. I'm not afraid of cryptic instructions (I work with Red Hat software!). However, I have a number of expensive hobbies... so I am a bit cost sensitive. Thanks, Tim. On Mon, Oct 9, 2017 at 12:27 PM, Gelman, Ian S <isgelman(a)wpi.edu> wrote: > Hi Tim, > > The Anet A8 and TEVO tarantula are i3 derivatives, what with the hardware > being open source. Each of these can be found on Amazon. The assembly > guides are pretty cryptic though, with lots of skipped steps and a lack of > images. > > However, If Ab Initio can afford the $600, I would seriously recommend > getting Josef Prusa's original version, which he sells on his website. > > https://shop.prusa3d.com/en/3d-printers/59-original-prusa- > i3-mk2-kit.html?gclid=EAIaIQobChMI4q3brfnj1gIVAQlpCh > 0hhgs4EAQYASABEgI18fD_BwE > > The manuals are amazing, with an active community of people making > revisions on Github. > > Monoprice also has a fork of the i3 which they sell as well. > > https://www.monoprice.com/product?p_id=13860&gclid= > EAIaIQobChMI4q3brfnj1gIVAQlpCh0hhgs4EAQYAiABEgJKQPD_BwE > > In terms of assembly time: the A8, the Tarantula, and the original i3 will > all take a couple days of (hopefully some poor intern's) time to assemble > and test. The Monoprice i3 ships semi-assembled, and you can get printing > within a couple hours. > > Hope that helped, > > Ian > > On Oct 9, 2017, at 11:54 AM, Tim Keller <turbofx(a)gmail.com> wrote: > > Hey Gang, > > I've been given clearance to buy a 3d printer, with the caveat of > controlling the cost. > > There are an infinite number of choices out there. > > A co-worker bought this one and had good luck with it: > https://www.walmart.com/ip/2017-Upgraded-Quality-High- > Precision-Reprap-Prusa-i3-DIY-3d-Printer-Kit-Anet-A8-3d- > Printer-3d-Drucker/919868952 > > I've also found this one which seems to be pretty good quality as well: > > https://www.3dprintersonlinestore.com/product/reprap/tarantula-3d- > printer-kit > > I'd honestly like to NOT give walmart money if at all possible. > > Any recommendations? > > Thanks, > Tim. > > > > -- > I am leery of the allegiances of any politician who refers to their > constituents as "consumers". > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > > -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

1 0

Re: [Wlug] 3d printing question.
by Gelman, Ian S Oct. 9, 2017

Oct. 9, 2017

Hi Tim, The Anet A8 and TEVO tarantula are i3 derivatives, what with the hardware being open source. Each of these can be found on Amazon. The assembly guides are pretty cryptic though, with lots of skipped steps and a lack of images. However, If Ab Initio can afford the $600, I would seriously recommend getting Josef Prusa's original version, which he sells on his website. https://shop.prusa3d.com/en/3d-printers/59-original-prusa-i3-mk2-kit.html?g… The manuals are amazing, with an active community of people making revisions on Github. Monoprice also has a fork of the i3 which they sell as well. https://www.monoprice.com/product?p_id=13860&gclid=EAIaIQobChMI4q3brfnj1gIV… In terms of assembly time: the A8, the Tarantula, and the original i3 will all take a couple days of (hopefully some poor intern's) time to assemble and test. The Monoprice i3 ships semi-assembled, and you can get printing within a couple hours. Hope that helped, Ian On Oct 9, 2017, at 11:54 AM, Tim Keller <turbofx(a)gmail.com<mailto:turbofx@gmail.com>> wrote: Hey Gang, I've been given clearance to buy a 3d printer, with the caveat of controlling the cost. There are an infinite number of choices out there. A co-worker bought this one and had good luck with it: https://www.walmart.com/ip/2017-Upgraded-Quality-High-Precision-Reprap-Prus… I've also found this one which seems to be pretty good quality as well: https://www.3dprintersonlinestore.com/product/reprap/tarantula-3d-printer-k… I'd honestly like to NOT give walmart money if at all possible. Any recommendations? Thanks, Tim. -- I am leery of the allegiances of any politician who refers to their constituents as "consumers". _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org<mailto:Wlug@mail.wlug.org> http://mail.wlug.org/mailman/listinfo/wlug

1 0

3d printing question.
by Tim Keller Oct. 9, 2017

Oct. 9, 2017

Hey Gang, I've been given clearance to buy a 3d printer, with the caveat of controlling the cost. There are an infinite number of choices out there. A co-worker bought this one and had good luck with it: https://www.walmart.com/ip/2017-Upgraded-Quality-High-Precision-Reprap-Prus… I've also found this one which seems to be pretty good quality as well: https://www.3dprintersonlinestore.com/product/reprap/tarantula-3d-printer-k… I'd honestly like to NOT give walmart money if at all possible. Any recommendations? Thanks, Tim. -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

1 0

Re: [Wlug] Lenovo Black Screen Issue
by Tim Keller Oct. 5, 2017

Oct. 5, 2017

Also with the Lenovo's you can control the video output with the "FN" keys. Usually it's the F7 key. At least on my 430 it looks like a little projector. Tim. On Thu, Oct 5, 2017 at 9:26 AM, THE HAMMER <hammerron(a)hotmail.com> wrote: > Thank you to the people who replied with questions or suggestions. > > Here is some additional info: > > > The keyboard backlighting is what flashes briefly at start up attempt. > The screen shows no light what so ever. > > > Tried launching systems off of live usbs...no luck > Tried the Lenovo reset button.....no luck > > Tried running a different screen with an hdmi cable....it said no input > > > > > > ------------------------------ > *From:* wlug-bounces(a)mail.wlug.org <wlug-bounces(a)mail.wlug.org> on behalf > of John Stoffel <john(a)stoffel.org> > *Sent:* Wednesday, October 4, 2017 2:10 PM > *To:* Worcester Linux Users Group > *Subject:* Re: [Wlug] Lenovo Black Screen Issue > > > THE> ..hope this is not too off topic.. Have a friend with a Lenovo > THE> ideapad. The screen stays black and does not light up > THE> whatsoever. Would anyone have suggestions for best way to go > THE> with it? > > Try plugging the thing into a monitor while it's powered off, then > power it on and see if you get anything that way. It could be that > the display is fried. > > Does the disk spin up? Does it have windows on it? Can you put a USB > thumb drive on the system and try to boot from that (knoppix is really > good for this, or one of the system rescue linux images). > > THE> The sticker on it gives further info: Windows 8, intel core i5, > THE> and Ultrabook. > > Would need more, like the model number. > > THE> The power button lights up and stays on when you try to turn the > THE> unit on, as long as you keep the power cord plugged in. > THE> Apparently the battery holds no charge. The keyboard keys > THE> quickly flash once also when the start button is hit. > > which keys flash? > > THE> The case does show some dents, and they say it was dropped a few > times. > > LOL! > > THE> They've tried disconnecting the battery thing with no luck. > > External display is my first bet. Remove the hardware as well if > possible. > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > > -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

1 0

Re: [Wlug] Lenovo Black Screen Issue
by John Stoffel Oct. 5, 2017

Oct. 5, 2017

>>>>> "THE" == THE HAMMER <hammerron(a)hotmail.com> writes: THE> Thank you to the people who replied with questions or suggestions. THE> Here is some additional info: THE> The keyboard backlighting is what flashes briefly at start up attempt. The THE> screen shows no light what so ever. THE> Tried launching systems off of live usbs...no luck THE> Tried the Lenovo reset button.....no luck THE> Tried running a different screen with an hdmi cable....it said no input I suspect the unit is dead and might need to be opened up to look for problems like broken connections, burnt spots on the motherboard, etc. Maybe try taking it apart and then putting it back together. The drop(s) could have knocked something loose. Pull out the disk in the system might also help. Otherwise... send it to Lenovo for repair, or buy a new/used one to replace.

1 0

Re: [Wlug] Lenovo Black Screen Issue
by THE HAMMER Oct. 5, 2017

Oct. 5, 2017

Thank you to the people who replied with questions or suggestions. Here is some additional info: The keyboard backlighting is what flashes briefly at start up attempt. The screen shows no light what so ever. Tried launching systems off of live usbs...no luck Tried the Lenovo reset button.....no luck Tried running a different screen with an hdmi cable....it said no input ________________________________ From: wlug-bounces(a)mail.wlug.org <wlug-bounces(a)mail.wlug.org> on behalf of John Stoffel <john(a)stoffel.org> Sent: Wednesday, October 4, 2017 2:10 PM To: Worcester Linux Users Group Subject: Re: [Wlug] Lenovo Black Screen Issue THE> ..hope this is not too off topic.. Have a friend with a Lenovo THE> ideapad. The screen stays black and does not light up THE> whatsoever. Would anyone have suggestions for best way to go THE> with it? Try plugging the thing into a monitor while it's powered off, then power it on and see if you get anything that way. It could be that the display is fried. Does the disk spin up? Does it have windows on it? Can you put a USB thumb drive on the system and try to boot from that (knoppix is really good for this, or one of the system rescue linux images). THE> The sticker on it gives further info: Windows 8, intel core i5, THE> and Ultrabook. Would need more, like the model number. THE> The power button lights up and stays on when you try to turn the THE> unit on, as long as you keep the power cord plugged in. THE> Apparently the battery holds no charge. The keyboard keys THE> quickly flash once also when the start button is hit. which keys flash? THE> The case does show some dents, and they say it was dropped a few times. LOL! THE> They've tried disconnecting the battery thing with no luck. External display is my first bet. Remove the hardware as well if possible. _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

Re: [Wlug] Lenovo Black Screen Issue
by jebaill52 Oct. 4, 2017

Oct. 4, 2017

Power it down. Press the Novo button with a paper clip or something small. This will bring you to the Novo menu which has bios,boot,and recovery entries. Sent from my Verizon, Samsung Galaxy smartphone -------- Original message --------From: John Stoffel <john(a)stoffel.org> Date: 10/4/17 2:10 PM (GMT-05:00) To: Worcester Linux Users Group <wlug(a)mail.wlug.org> Subject: Re: [Wlug] Lenovo Black Screen Issue THE> ..hope this is not too off topic.. Have a friend with a Lenovo THE> ideapad. The screen stays black and does not light up THE> whatsoever. Would anyone have suggestions for best way to go THE> with it? Try plugging the thing into a monitor while it's powered off, then power it on and see if you get anything that way. It could be that the display is fried. Does the disk spin up? Does it have windows on it? Can you put a USB thumb drive on the system and try to boot from that (knoppix is really good for this, or one of the system rescue linux images). THE> The sticker on it gives further info: Windows 8, intel core i5, THE> and Ultrabook. Would need more, like the model number. THE> The power button lights up and stays on when you try to turn the THE> unit on, as long as you keep the power cord plugged in. THE> Apparently the battery holds no charge. The keyboard keys THE> quickly flash once also when the start button is hit. which keys flash? THE> The case does show some dents, and they say it was dropped a few times. LOL! THE> They've tried disconnecting the battery thing with no luck. External display is my first bet. Remove the hardware as well if possible. _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

Re: [Wlug] Lenovo Black Screen Issue
by Michael C Voorhis Oct. 4, 2017

Oct. 4, 2017

John Stoffel writes: > THE> The keyboard keys quickly flash once also when the start button > THE> is hit. > which keys flash? When a lenovo portable with a backlit keyboard is powered up, the keyboard backlight will light up once and fade out--a part of the POST I presume. Maybe this is what they're talking about. --MCV.

1 0

Re: [Wlug] Lenovo Black Screen Issue
by John Stoffel Oct. 4, 2017

Oct. 4, 2017

THE> ..hope this is not too off topic.. Have a friend with a Lenovo THE> ideapad. The screen stays black and does not light up THE> whatsoever. Would anyone have suggestions for best way to go THE> with it? Try plugging the thing into a monitor while it's powered off, then power it on and see if you get anything that way. It could be that the display is fried. Does the disk spin up? Does it have windows on it? Can you put a USB thumb drive on the system and try to boot from that (knoppix is really good for this, or one of the system rescue linux images). THE> The sticker on it gives further info: Windows 8, intel core i5, THE> and Ultrabook. Would need more, like the model number. THE> The power button lights up and stays on when you try to turn the THE> unit on, as long as you keep the power cord plugged in. THE> Apparently the battery holds no charge. The keyboard keys THE> quickly flash once also when the start button is hit. which keys flash? THE> The case does show some dents, and they say it was dropped a few times. LOL! THE> They've tried disconnecting the battery thing with no luck. External display is my first bet. Remove the hardware as well if possible.

1 0

Lenovo Black Screen Issue
by THE HAMMER Oct. 4, 2017

Oct. 4, 2017

..hope this is not too off topic.. Have a friend with a Lenovo ideapad. The screen stays black and does not light up whatsoever. Would anyone have suggestions for best way to go with it? More details: The sticker on it gives further info: Windows 8, intel core i5, and Ultrabook. The power button lights up and stays on when you try to turn the unit on, as long as you keep the power cord plugged in. Apparently the battery holds no charge. The keyboard keys quickly flash once also when the start button is hit. The case does show some dents, and they say it was dropped a few times. They've tried disconnecting the battery thing with no luck. Any suggestions?

1 0