- WLUG - wlug.mailman3.com

compaq deskpro
by Jim Stith May 18, 2001

May 18, 2001

well here goes... i got an old compaq deskpro (yes, a stupid mistake... but it was cheap) and wanted to load red hat 7.0 on it and possibly use the deskpro as a intranet server so that i could learn how to set a server up. everything loads fine but when the system tries to go into x and give me a login screen, the monitor makes a poping sound and the screen goes blank. same thing with mandrake and caldera. the screen stays blank. i have gone into the bios and disabled pnp and energy saver but that does not help. i have been going through the faq's and the only thing i have found out is that compaq did some strange things around the mbr. i have no other options open to me and would appreciate any help anyone can give concerning this. thanks jim s.

5 4

newbie seeks help with kernel upgrade
by Dan Crooks May 17, 2001

May 17, 2001

Hi, and thank you in advance for your patience. This deals with upgrading kernel In attempting to install vmware 2.0 in Red Hat 6.2, I was notified that I needed an upgrade to RH6.2 kernel. While trying to install the kernel upgrade with rpm I received error messages: 1) failed dependencies: rpmlib(PayloadFilesHavePrefix) <= 4.0.1 is needed by kernel-2.2.19-6.2.1 2) mount < 2.10r conflicts with kernel-2.2... 3) nfs-utils < 0.3.1 conflicts with kernel-2.2... I understand that I can ignore the conflicts (2,3) by specifying --replacefiles in the rpm command. I decided to upgrade rpm assuming that rpmlib would be included. Using gnorpm I downloaded rpm 4.0-4 and received another error: only packages with major numbers <=3 are supported by this release of rpm. Presumably this message is issued by the currently version of rpm 3.0.4-0.48. This may be a red herring and not important as I continued. I used ncftp to download by specifying "mget rpm-*.rpm" and received four files rpm-4.0.2-6x.i386.rpm, also -build-, -devel-, -python- from RH site. When I tried to install rpm-4.0.2-6x I received an error: failed dependency libdb-3.1.so. Where can I find libdb? How could I determine that for myself if I run into another dependency? Do you have any suggestions/recommendations regarding updating kernel? I am using instructions retrieved from RH titled "Upgrading the Linus Kernel on Red Hat Linux systems" by Red Hat Support last updated 2000 May 17 -- Thank you, Dan Crooks

3 2

sorry about that
by Dan Crooks May 17, 2001

May 17, 2001

I put it on the WLUG WWWBoard, where it obviously belongs. Sorry for the inconvenience. -- Thank you, Dan Crooks

1 0

REMINDER: Meeting Wednesday, May 16th, 7:00 PM
by Andy Stewart May 14, 2001

May 14, 2001

Hi everybody, This is a reminder about the upcoming WLUG meeting, to be held in Kinnicutt Hall (a.k.a the usual place) at WPI at 7:00 PM on Wednesday, May 16h. The topic for discussion will be the practical use of IPCHAINS. What does that mean? This meeting, Doug Waud and I will present to you ways to use IPCHAINS to implement a firewall. This is not theory, this is practice...what to type, what it does, and why. This talk will build on the more detailed information presented by Bob Ziegler at our last meeting. Doug will start with a presentation of the simpler case of getting a firewall up which supports masquerading (that is, getting multiple machines on your home network to share one IP address, as you would for cable modem, for example), e-mail, and browsing. I will follow up with more detailed examples of IPCHAINS code from my own firewall script for allowing certain services through the firewall to the home network. Although firewalling is a complex topic, we're hoping to distill out of that complexity enough information so that a person can get started toward implementing a secure firewall. I'm looking forward to a good turnout at this meeting. Come on down! Later, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

1 0

RE: [Wlug] charter.net & ssh
by Keller, Tim May 10, 2001

May 10, 2001

Bill, Try doing a traceroute on port 22 to your machine and see where along the line it get stopped. It's probably a default security thing they have setup, you could probably call up tech support and have them remove the blocks for specific ports... Tim. -----Original Message----- From: Bill Mills-Curran [mailto:bcurran@clariion.com] Sent: Thursday, May 10, 2001 11:30 AM To: Worcester Linux Users Group Subject: [Wlug] charter.net & ssh I got my new Charter cable modem and Linksys router set up recently, but I find that Charter seems to be blocking inbound access. I've the the sshd running, and I set the router to pass port 22 to my linux box. I can even connect if I ssh outbound to the router DHCP address, so it looks like my end of the configuration is correct. Anybody experience anything like this? Do you think that Charter will allow incoming requests to my system? TIA, Bill _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

3 3

RE: [Wlug] charter.net & ssh
by Keller, Tim May 10, 2001

May 10, 2001

Bill, I make it to the same point. Looks like the 10.254.1.2 is the gateway onto that segment of Ethernet, this would indicate that they do blocking at the router (at least to me and i'm not a network expert...) Tim. -----Original Message----- From: Bill Mills-Curran [mailto:bcurran@clariion.com] Sent: Thursday, May 10, 2001 2:09 PM To: 'wlug(a)mail.wlug.org' Subject: RE: [Wlug] charter.net & ssh Tim, It never makes it. BTW, if you're looking to try this yourself, I've turned off the forwarding on my router. I probably should have left it on so that I could work with the Charter people. Bill traceroute to 24.240.184.215 (24.240.184.215), 30 hops max, 40 byte packets 1 clar45sec (128.221.45.11) 0.870 ms 0.892 ms 0.829 ms 2 sobo-clariion-gw.us.dg.com (128.221.35.65) 1.238 ms 0.740 ms 0.829 ms 3 webo-atm-oc3.us.dg.com (128.221.35.61) 1.851 ms 1.232 ms 1.286 ms 4 128.221.22.60 (128.221.22.60) 1.408 ms 1.063 ms 1.791 ms 5 128.221.4.66 (128.221.4.66) 1.141 ms 1.629 ms 1.113 ms 6 128.221.23.23 (128.221.23.23) 1.917 ms 1.076 ms 1.113 ms 7 us-customs2.us.dg.com (128.221.131.14) 1.580 ms 1.613 ms 2.193 ms 8 uunet-gw.us.dg.com (128.221.122.1) 3.197 ms 2.035 ms 1.939 ms 9 500.Serial4-1-0.GW3.BOS1.ALTER.NET (157.130.222.33) 3.365 ms 3.313 ms 3.132 ms 10 196.ATM2-0.XR1.BOS1.ALTER.NET (152.63.25.122) 3.839 ms 3.410 ms 3.814 ms 11 191.ATM7-0.GW3.BOS1.ALTER.NET (146.188.177.209) 3.342 ms 3.221 ms 3.449 ms 12 hsa-noxford-t3.customer.alter.net (157.130.220.226) 5.158 ms 5.753 ms 5.425 ms 13 24-216-218-3.hsacorp.net (24.216.218.3) 5.489 ms 5.842 ms 6.198 ms 14 10.254.1.2 (10.254.1.2) 6.192 ms 9.664 ms 6.756 ms 15 * * * 16 * * * 17 * * * 18 * * * 19 * * * 20 * * * 21 * * * 22 * * * 23 * * * 24 * * * 25 * * * 26 * * * 27 * * * 28 * * * 29 * * * 30 * * * On Thu, 10 May 2001, Keller, Tim wrote: > Date: Thu, 10 May 2001 11:30:26 -0400 > From: "Keller, Tim" <Tim.Keller(a)stratus.com> > Reply-To: wlug(a)mail.wlug.org > To: "'wlug(a)mail.wlug.org'" <wlug(a)mail.wlug.org> > Subject: RE: [Wlug] charter.net & ssh > > Bill, > > Try doing a traceroute on port 22 to your machine and see where along the > line it get stopped. > > It's probably a default security thing they have setup, you could probably > call up tech support and have them remove the blocks for specific ports... > > Tim. > > -----Original Message----- > From: Bill Mills-Curran [mailto:bcurran@clariion.com] > Sent: Thursday, May 10, 2001 11:30 AM > To: Worcester Linux Users Group > Subject: [Wlug] charter.net & ssh > > > I got my new Charter cable modem and Linksys router set up recently, > but I find that Charter seems to be blocking inbound access. I've the > the sshd running, and I set the router to pass port 22 to my linux > box. I can even connect if I ssh outbound to the router DHCP address, > so it looks like my end of the configuration is correct. > > Anybody experience anything like this? Do you think that Charter will > allow incoming requests to my system? > > TIA, > Bill > > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

charter.net & ssh
by Bill Mills-Curran May 10, 2001

May 10, 2001

I got my new Charter cable modem and Linksys router set up recently, but I find that Charter seems to be blocking inbound access. I've the the sshd running, and I set the router to pass port 22 to my linux box. I can even connect if I ssh outbound to the router DHCP address, so it looks like my end of the configuration is correct. Anybody experience anything like this? Do you think that Charter will allow incoming requests to my system? TIA, Bill

1 0

remote backup...
by Marc Hughes May 10, 2001

May 10, 2001

Hey Guys, I have a dedicated web server that I need to backup (entirely). Unfortunately there's not enough room for me to make a tar archive on the machine, and there's no tape drive either in the machine or at that facility that we can efficiently use. We get charged for bandwidth usage, so I would like to compress the backup before it comes over the wire. Also, this is a one time deal, so I can't go spending massive amounts of cash on some commercial backup software. Any Suggestions? -Marc

2 1

CDMA compatible phone and Linux...
by Keller, Tim May 10, 2001

May 10, 2001

Hey Everybody, Has anybody ever had any luck getting a CDMA phone (Motorola StarTAC) to work with Linux? I went looking and found software that would let you alter the phone-book on the phone, but didn't do anything about dialing. I'm figuring its either a) shows up like a Hayes device (which would be wonderful) or b) it uses some totally undocumented proprietary protocol I'll be forced to reverse engineer... Tim.

1 0

Hope this is the right list...
by rlapp＠WPI.EDU May 7, 2001

May 7, 2001

Hey guys, I know there are two lists, one for questions and one for announcements, hope this is the right one. Here is the question, hopefully someone knows or can point me to a good resource. I have the following system: Athlon TB 750, 256meg, ABIT KT7 RAID 2x20gig Hard Drives on RAID 0 Striping - Win2k Server Installed. (hde&hdf) 1x13 gig HD With Linux Mandrake 8.0 Installed. (hda) 1x60 gig HD for data. (hdb) I would like to have LILO come up first and then give me the option of booting to the Windows RAID Drives. However, if I boot to my 13 gig drive from the BIOS, and have LILO come up I can not get it to boot to the windows partitition. I have put in the entries to lilo.conf to boot to (hde) But that didnt work, /sbin/lilo gives errors (dont have them in front of me now:( ) I also tried to point it towards hdf, but that gave errors saying no valid boot sector etc. Sooo now in order to boot both OSs I need to have the BIOS load the RAID array as the default, and use a floppy to boot to linux. I can only think that lilo is having a problem knowing what drive to point to to load up windows since it is a raid array... This make sense? Thanks! Bill Bill

1 0