- WLUG - wlug.mailman3.com

Getting the Edimax ew-7108pcg working on Xubuntu 6.06 LTS
by Adam Keck Jan. 4, 2008

Jan. 4, 2008

Hello All, I found this card on newegg.com for cheap money and the company claimed Linux support, so I got it. So far, I have it working on a WEP test network, but the driver package does come with WPA-supplicant bits. I assume that works as well. Folks online claim it works out of the box on Ubuntu 7.10, but my laptop didn't do well with the newer Xubuntus, so I had to make do. Note, out-of-the-box, the rt61 driver provided by Xubuntu 6.06 LTS throws a stack trace and can wedge your system. I found that you need to build the company's rt61 driver. Here was my procedure for 6.06 LTS: 1) Install gcc and friends,if you haven't already. 2) Update to the latest kernel packages. 3) Install the linux-header packages for your platform (I used the 386 packages). 4) Download the driver zip for the ew-7108pcg from the Edimax website's support area, unpack it, and the unpack the tar ball inside. 5) cd into the IS_Linux_STA_6x_D_1.1.1.0 directory 6) run make 7) Ignore all the compiler warnings ;) 9) run sudo make install 10) Add "alias ra0 rt61" to /etc/modules.conf or into your preferred location in /etc/modules.d if it wasn't automatically added. 11) Add correct bits to /etc/network/interfaces So, that being said (I am typing this email via the card now): 1) On boot, the card comes up, but does not go online. Ifconfig has configured the interface, but iwconfig shows no essid or key configured. 2) I opened the Applications->System->Networking tool. The tool shows the interface as active. I can "activate/deactivate", but likewise iwconfig shows no configuration. I can only bring the interface up via running "sudo ifup ra0". My wife's probably not going to go for that ;). Does anyone have any ideas about what plumbing I am missing to get automatic configuration? Thanks! -Adam

3 4

Information for Linux newbies?
by Kevin Harrington Dec. 29, 2007

Dec. 29, 2007

As i mentioned at the meeting this past week I am going to be giving a seminar for linux newbies and would like to pull from people that know better then i do on what i should teach people. What i would like to know is: What are some things that you wish you had known as a newbie? Think back to your very first linux install and any short-cuts, tips, tricks, and gatcha's that would make peoples first experience easier. There is a lot of windows resentment after the slow trainwreck that is vista, so lets see if we can get a few new converts! P.S. one of the big concerns for a few people that i have talked to has been games, if anyone has a list of new-ish games that work or any tips specific to making the most recent generation work under linux, that would make things much easier ;)

6 5

reboot problem
by Gregory Avedissian Dec. 18, 2007

Dec. 18, 2007

At the meeting before last, I asked about a problem I'm having with the computer occasionally going to a black screen with no disk activity on reboot, right after the grub menu goes away. Overnight memtest showed no errors, I put a different vid card in, and still had the black screen problem. One of the things someone mentioned was to test the power supply. Recently, I had a few hard lockups and a couple of spontaneous reboots. So, how do I test my power supply, other than replacing it and seeing if the problem goes away? Or is that evidence enough to change it ASAP? According to lm-sensors, voltages are fine, and I've even sat and watched gkrellm for long periods of time - they look stable. Any suggestions would be appreciated. Greg

3 4

REMINDER: Upcoming WLUG Meeting
by Andy Stewart Dec. 11, 2007

Dec. 11, 2007

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 HI Everybody, Our next WLUG meeting will be on Wednesday, 12-dec-2007, at 7:00 PM in the Access Grid Room on the WPI campus in Worcester, MA USA. At this meeting, we'll have Dan Walsh from RedHat as our guest speaker. Dan will talk about SELinux. First, Dan will give a quick overview of SELinux, followed by a discussion of what's new with SELinux in Fedora 8. Dan will then hand out SELinux live CDs of Fedora 8, from which he will present how to write SELinux policy. This promises to be a great meeting that you won't want to miss. After the meeting, we'll head out for dinner at a local pizza restaurant. See ya then! Andy - -- Andy Stewart, Founder Worcester Linux Users' Group (http://www.wlug.org) Chelmsford Linux Meetup Group (http://linux.meetup.com/393) Amateur Radio: KB1OIQ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFHXeT5Hl0iXDssISsRAggmAJ0RwVvLuUuHMMZSElq5lt8hCh4lOACfQraL teVSJANE/lCW5eAlSSCXnSs= =ROZn -----END PGP SIGNATURE-----

1 0

Any XMl-types out there?
by Stephen Daukas Dec. 4, 2007

Dec. 4, 2007

Hello Everyone! So, I have to teach myself myself XML, XSL, et al., for work... (The VB stuff is in the background for now!) I started playing with XML yesterday, and have gotten pretty far along. But... I have to deal with M$-generated XML files that looks like the following (I added the first two lines for display in a browser): <?xml version="1.0"?> <?xml-stylesheet type="text/xsl" href="SOURCES.xsl"?> <xml xmlns:s='uuid:BDC6E3F0-6DA3-11d1-A2A3-00AA00C14882' xmlns:dt='uuid:C2F41010-65B3-11d1-A29F-00AA00C14882' xmlns:rs='urn:schemas-microsoft-com:rowset' xmlns:z='#RowsetSchema'> <s:Schema id='RowsetSchema'> <s:ElementType name='row' content='eltOnly'> <s:AttributeType name='ID305B' rs:number='1' rs:nullable='true' rs:maydefer='true' rs:writeunknown='true'> <s:datatype dt:type='string' dt:maxLength='50'/> </s:AttributeType> [snip] <s:extends type='rs:rowbase'/> </s:ElementType> </s:Schema> <rs:data> <z:row ID305B='MA11002' CYCLE='2002' USE_ID='537' CAUSE_ID='226' SOURCE_ID='180' CONFIRMED='N'/> [~11,000 lines snipped] So, I wrote the following SOURCES.xsl file to display this beast in a browser (it uses recursion): <?xml version='1.0'?> <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:rs='urn:schemas-microsoft-com:rowset' xmlns:z='#RowsetSchema' version="1.0"> <xsl:template match="/"> <HTML> <BODY topmargin="0" leftmargin="0"> <xsl:apply-templates select="/xml/rs:data"/> </BODY> </HTML> </xsl:template> <xsl:key name="rows-by-AU" match="z:row" use="@ID305B" /> <xsl:template match="z:row"> <xsl:apply-templates select="key('rows-by-AU', ID305B)" /> <div AU_ID="{ID305B}"> <xsl:apply-templates select="key('rows-by-AU', ID305B)" /> <div USE_ID="{CYCLE}"> <div USE_ID="{USE_ID}"> <xsl:value-of select="@ID305B"/> (<xsl:value-of select="@CYCLE"/>): <xsl:apply-templates select="key('rows-by-AU', USE_ID)"/> <xsl:value-of select="@USE_ID"/> - <xsl:value-of select="@CAUSE_ID"/> - <xsl:value-of select="@SOURCE_ID"/> </div> </div> </div> </xsl:template> </xsl:stylesheet> And it works (surprised the hell out of me)! But now I'm having the hardest time figuring out how to format this the way I'd like. This is how it currently looks in the browser: MA11002 (2002): 537 - 226 - 180 MA11002 (2002): 537 - 448 - 140 MA11002 (2002): 538 - 226 - 180 MA11002 (2002): 538 - 413 - 140 MA11002 (2002): 538 - 413 - 177 MA11002 (2002): 539 - 226 - 180 MA11002 (2002): 539 - 413 - 140 MA11002 (2002): 541 - 226 - 180 MA11002 (2002): 541 - 478 - 140 MA11002 (2002): 541 - 413 - 140 MA11018 (2002): 538 - 413 - 140 MA11018 (2002): 539 - 413 - 140 MA11018 (2002): 541 - 413 - 140 MA11019 (2002): 537 - 312 - 140 MA11019 (2002): 538 - 312 - 140 MA11019 (2002): 539 - 312 - 140 MA11019 (2002): 541 - 312 - 140 [... other IDs in between 2002 and 2008 ...] MA11002 (2008): 537 - 226 - 180 MA11002 (2008): 537 - 478 - 92 MA11002 (2008): 537 - 312 - 156 [... thousands of additional IDs ...] And I'd like the output to look something like: MA11002 (2002): 537 - 226 - 180 - 448 - 140 538 - 226 - 180 - 413 - 140 - 177 539 - 226 - 180 - 413 - 140 MA11002 (2008): 537 - 226 - 180 - 478 - 92 - 312 - 156 [...] So, things would need to be grouped by ID305B and CYCLE, then by USE_ID, then by CAUSE_ID, then by SOURCE_ID. But, I'd even settle for output that looks like: MA11002 (2002): 537 - 226 - 180 MA11002 (2002): 537 - 448 - 140 MA11002 (2002): 538 - 226 - 180 MA11002 (2002): 538 - 413 - 140 MA11002 (2002): 538 - 413 - 177 MA11002 (2002): 539 - 226 - 180 MA11002 (2002): 539 - 413 - 140 MA11002 (2002): 541 - 226 - 180 MA11002 (2002): 541 - 478 - 140 MA11002 (2002): 541 - 413 - 140 MA11002 (2008): 537 - 226 - 180 MA11002 (2008): 537 - 478 - 92 MA11002 (2008): 537 - 312 - 156 [... thousands of additional IDs ...] where the IDs from the two different years are adjacent to one another... I believe this will involve much pain and suffering while I try to figure out such things as XML nodes, grouping, sorting, and the like... But, I'm hoping someone will look at this and say "boy Daukas, that's easy... just do this, and then that, and voila - your done!". Anyone? Anyone? ;-) Thanks in advance for any help! Steve

6 8

Solaris automounter
by vze284qe＠verizon.net Nov. 29, 2007

Nov. 29, 2007

Hi All, At work I have a SunFire v245 (Sparc) running SunOs 5.10, which I guess is Solaris 10. When I put a CD in the drive, it doesn't get mounted. I checked to see if 'vold' was running and it was. What else should I check for? I'm not too familiar with Solaris, so any help is appreciated. TIA, -Chuck

1 0

Xinerama issues with Fedora Core 8...
by Tim Keller Nov. 21, 2007

Nov. 21, 2007

Hey Gang, I had a perfectly working Fedora Core 6 system and I had to go mess things up... I backed up my whole system and did a clean install of Fedora Core 8, only to find that my >old< xorg.conf config doesn't work anymore... I was able to get a config finally working, but only on a single monitor. Here's my setup: Screen 1: DELL LCD panel connected to an onboard AGP intel video card Screen 2: DELL LCD panel connected to a PCI ATI Radeon video card Now, I have config files that'll drive one or the other, but not both. The moment I enable Xinerama, the X server crashes with a signal 11. As far as I can tell... Xinerama support is totally borked in Fedora Core 8. Has anybody come across any solutions? Thanks, Tim. -- I am leary of the allegiances of any politician who refers to their constituents as "consumers".

2 6

initrd.img file
by vze284qe＠verizon.net Nov. 20, 2007

Nov. 20, 2007

Hello, I built a custom "gutsy gibbon" kernel, but I can't find the corresponding initrd.img file. There's a link in / that looks like this: initrd.img-> boot/initrd.img-2.6.22-generic. Shouldn't there be a new initrd.img file that was created when I built the new kernel or am I missing something? TIA, -- -Chuck

4 3

Linux Choix?
by Greater Worcester Land Trust Nov. 20, 2007

Nov. 20, 2007

It has been a while. I tried getting our nonprofit (Worcester land conservation) to adopt Linux some years back. Problem I had back then was weak graphic options, publisher options, Quicken options, and a lack of a good answer to running ArcGIS. I was beaten back into M$. I want another crack at this. I am looking to take a spare laptop and install a Linux OS and OS apps. Previously, some years back, I used to use what are now Mandriva Linux installs. Coming back to this I see that there are dozens and dozens of options these days. What, if any, of the options do the WLUG folk prefer/recommend. Thanks so much, Colin

5 4

Re: [Wlug] Xinerama issues with Fedora Core 8...
by Jamie Guinan Nov. 19, 2007

Nov. 19, 2007

Can you downgrade the individual driver(s)? See this thread from this morning, http://lists.freedesktop.org/archives/xorg/2007-November/030311.html -Jamie On Mon, 19 Nov 2007, Tim Keller wrote: > So... if I'm reading this right... I'm stuck then... since I have monitors > on separate video cards. > > I know it's cool that xrandr can do all this funky stuff, but I'd just be > happy to keep existing functionality. > > What are my options now... downgrade my X server? > > On Nov 19, 2007 1:34 PM, Chuck Anderson <cra(a)wpi.edu> wrote: > > > On Mon, Nov 19, 2007 at 01:07:54PM -0500, Tim Keller wrote: > > > As far as I can tell... Xinerama support is totally borked in Fedora > > Core > > > 8. Has anybody come across any solutions? > > > > Xinerama is no longer supported in Xorg. But not to fear! It has > > been replaced by a new, dynamic method of doing dual-head with the > > XRandR extension. Unfortunately, neither the Release Notes nor the > > system-config-display tool have taken these changes into account. > > Also, this won't work with multiple separate video cards, only single > > video cards with multiple output on them. The fact that the X server > > segfaults when configured with Xinerama is a bug. > > > > You can turn on/off and configure multiple displays all dynamically > > using the xrandr command. Try this to display the available outputs > > while the X server is running: > > > > xrandr > > > > To configure a specific output, try these commands: > > > > xrandr --output DVI-1 --auto > > > > Or: > > > > xrandr --output DVI-1 --mode 1024x768 > > > > To configure dual-head (NOTE: You have to pre-configure the maximum > > combined virtual resolution you want to use in xorg.conf first, as > > specified below): > > > > xrandr --output DVI-1 --right-of DVI-0 > > > > This is nice because it means you can dynamically set up dual-head for > > an external VGA port on a laptop going to an LCD projector, for > > example. The internal LCD and external VGA could run at different > > resolutions too. > > > > For more fun, you can play with rotating screen images. > > > > You can also configure this in xorg.conf. The key differences from > > traditional multi-head and Xinerama are that you only use a single > > Screen in your ServerLayout section: > > > > Section "ServerLayout" > > Identifier "new dual-head configuration" > > Screen 0 "Screen0" 0 0 > > InputDevice "Keyboard0" "CoreKeyboard" > > EndSection > > > > Then refer to multiple monitors in the Device section. Here the > > format is Option "Monitor-<actual-monitor-id-from-xrandr>" > > "<monitor-identifier>" > > > > Section "Device" > > Identifier "Videocard0" > > Driver "radeon" > > Option "Monitor-DVI-0" "first" > > Option "Monitor-DVI-1" "second" > > EndSection > > > > Then specify the multiple Monitor sections themselves, using the > > monitor-identifiers specified above, with the placement options > > RightOf or LeftOf: > > > > Section "Monitor" > > Identifier "first" > > EndSection > > > > Section "Monitor" > > Identifier "second" > > Option "RightOf" "first" > > EndSection > > > > And then of course the single screen section. Note that you MUST > > specify the Virtual resolution as the sum of the resolutions of the > > multiple monitors you want to use (either horizontally or vertically, > > depending on your preferred monitor orientation). So below I have > > specified Virtual 3200 1200 so that I can place two 1600x1200 monitors > > side-by-side. The Monitor "first" is there just to satisfy the > > requirement for a Monitor to be specified--you don't put both monitors > > here. > > > > Section "Screen" > > Identifier "Screen0" > > Device "Videocard0" > > Monitor "first" > > DefaultDepth 24 > > SubSection "Display" > > Viewport 0 0 > > Virtual 3200 1200 > > Depth 24 > > Modes "1600x1200" "1600x1024" "1440x900" "1400x1050" > > "1360x768" "1280x1024" "1280x960" "1280x800" "1280x720" "1152x864" > > "1024x768" "800x600" "640x480" > > EndSubSection > > EndSection > > _______________________________________________ > > Wlug mailing list > > Wlug(a)mail.wlug.org > > http://mail.wlug.org/mailman/listinfo/wlug > > > > > > -- > I am leary of the allegiances of any politician who refers to their > constituents as "consumers". >

1 0