August 2002 - WLUG - wlug.mailman3.com

Server crash - is recovery possible?
by Richard Goodman 26 Aug '02

26 Aug '02

I'm running a RH 7.0 box at home that does (a) NAT for the local network (b) mail server for multiple domains (c) web server for multiple domains and (d) DNS for multiple domains Yesterday I attempted to ssh login from a workstation and got a message "..exited with Signal 11". I attempted to log on from the console and could not - got screen full of messages and numbers. At this point at least the web server was still running. I hit reset to reboot, got all the standard messages until "Checking root filesystem...." About 5-10% in, then: "Warning ..fsck.ext2 for device /dev/hda2 exited with signal 11 [FAILED] " Looked in my configuration book this morning ... hda2 is "/" . The only fortunate thing is that /home and /var are separate partitions on a second hard drive. Is there any way to recover from this? Barring that - is there any way to recover any config files from various places in /etc on this partition. If not I guess its a complete reload - mainly a problem with mail and DNS config files. I am only mildly competent on this stuff. If you need more info, I'll get it, although I don't know how to capture that screen full of info at the abort point. Dick Richard Goodman (508) 757-3452 r.goodman(a)11harvard.com 11 Harvard St, Worcester MA 01609

3 3

/dev/sequencer problems
by Wesley T Allen 25 Aug '02

25 Aug '02

Hi all, I'm full of problems this week. Hopefully this'll have a successful ending as well! Any time I try to open a midi file, I get an error "can't open /dev/sequencer" it doesn't matter what desktop I'm in (sometimes I hate arts); and I can't figure this out. Anyone got an idea? Wes

5 11

RE: [Wlug] orinoco driver
by Haines, Charles Allen 23 Aug '02

23 Aug '02

I've got a question relating to this. I've got a netgear wireless card also. The card is detected and i can plug and play with it but I can't seem to get it set and essid. First off, I'm not sure which config it reading from /etc/pcmcia/wireless.opts. I've tried manually configuring it with iwconfig, it accepts the WEIP key, however it will not accept my essid. I've tried typing iwconfig essid "WPI-Wireless-Network", but it doesn't seem to keep it. Once I put it in and type iwconfig again, it says ESSID="". Anyone have any ideas. I'm using gentoo linux with kernel 2.4.19. -----Original Message----- From: Andy Stewart [mailto:andystewart@attbi.com] Sent: Thu 8/22/2002 11:20 PM To: wlug(a)mail.wlug.org Cc: Subject: Re: [Wlug] orinoco driver Hi Wes, I discovered on my laptop that I had to insure that my wireless card was listed in /etc/pcmcia/config or things didn't work. (Although I use SuSE 8.0, I believe the description below is distribution agnostic). Try this as root: # cardctl ident Note the "manfid" line. Next, check /etc/pcmcia/config and see if a card with an entry matching the manfid is present. In my case, there was no entry so I added one thus: card "Andy's Linksys Wireless" manfid 0x0274, 0x1613 bind "orinoco_cs" The card string seems to be arbitrary text. The manfid comes from "cardctl ident", and the bind is to a kernel module. I have hotplugging services running, so when I plug in my wireless adapter, it automagically loads the kernel module(s), starts the net, sets up routing, etc. Give it a try and let us know how it goes! Later, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

2 1

orinoco driver
by Wesley Allen 23 Aug '02

23 Aug '02

Hi all, hope the BBQ went well, sorry I couldn't come (I was picking up my Brother-In-Law at Logan...sigh, one day I'll get to a meeting). I've got a netgear wifi card that works great in Mandrake Linux, with the exception of wep (I know, it's cracked). In doing some research on the card and the kernel module that loads wvlan_cs, I have found out that this module has been replaced (by and large) by orinoco_cs, which I understand to be more functional (i.e. maybe I can get wep working?). I tried modprobe -r wvlan_cs and modprobe orinoco_cs but it won't bind to my pcmcia card. So I figured, "Well, maybe my card is just one that can't use the newer driver..." WRONG! Just to see what it was like, I download Knoppix, burned it onto a cd, and booted it up. Guess what driver loaded? orinoco_cs!! And it worked well too. Well, since Knoppix is a cd-boot, run in memory distro; I'm not changing to it anytime soon. So I'm going to use this opportunity to learn something new. How can I bind the orinoco driver to my card? Wes -- This message may be digitally signed. For my public key, e-mail me a request.

2 4

LUG's rule
by Wesley Allen 23 Aug '02

23 Aug '02

Gang, can I just tell you how much I love the Linux community. You figure stuff out part way, and the community fills in the gaps! orinoco_cs is loaded, and wep is FINALLY enabled on my wlan! Thank you! Wes -- This message may be digitally signed. For my public key, e-mail me a request.

2 1

WLUG BBQ
by Andy Stewart 22 Aug '02

22 Aug '02

HI gang, I'm running late. I'm leaving my house now for the BBQ. I'll see ya there around 6:30 - 6:45 PM. Later, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

1 0

Red Hat, Westford MA career day
by Tim Burke 20 Aug '02

20 Aug '02

FYI - we're having an open house next Wednesday. http://bostonworks.boston.com/events/openhouses/redhat.shtml

1 0

REMINDER: WLUG BBQ
by Andy Stewart 18 Aug '02

18 Aug '02

HI everybody, The WLUG BBQ will be held on Thursday, August 22nd starting at 6 PM. Directions to Doug Waud's house, a.k.a BBQ Central, can be found on the WLUG website. Please RSVP if you plan to attend. I've received 3 or 4 RSVPs and I'm sure there will be more people than that. We need to have an idea how much food to purchase. WLUG will supply the standard BBQ fare and some soda and munchies. If you want beer or wine, you may BYOB and we'll have a way to keep it cold. Feel free to bring your own dessert or cold salad items if you so choose. Doug's house has a pool so bring towels and such! If you can think of anything else, let me know. Otherwise, I'll see you all on Thursday. Later, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

2 1

Kernel int-13 interface?
by Chuck Homic 16 Aug '02

16 Aug '02

Hey, this one goes out to all you kernel hackers out there. After 4 years, I've once again become interested in installing Linux on my HP OmniBook 300. Because it's an aswesome computer, and I think DOS 5 is a complete waste of its skill. [Background. The OB300 is a vintage 386-20, with a passive reflective 640x480 LCD display. Basically an oversize TI calculator running DOS] Anyway, from my first tests, I discovered that I can indeed boot the kernel using loadlin. But it immediately freaks out because it can't read (or even think about) my primary media... solid-state PCMCIA flash cards. Now, I briefly tried looking up some data on the OB300's PCMCIA chipset (I think the first standard was still being developed when this computer was made) and quickly decided that wasn't the route to go. And HP told me to go to hell when I asked. But DOS seems to work just fine using the int 13 interface to access the flash disks. So now my question... can I do that in Linux? I don't see any block device support (and most people would agree an int 13 block device would be stupid), but I think I can write one myself. All it would have to do is make the switch into real mode, call the int 13 interface, and then come back. Will Linux tolerate that? As far as I know, many drivers use a real mode interrupt on laptops to trigger their power saving capabilities (suspend, etc...), so I suspect it would be okay. Can anyone stop me before I go too far? Or should I go ahead and write this thing? -Chuck

1 0

potential mailing list problems
by Frank Sweetser 15 Aug '02

15 Aug '02

Just a quick heads up - the WLUG mailing list server seems to be having some issues, and since I won't be around to fix it until Monday, it may not be stable over the weekend. I have a backup of the mailing list data, though, so nothing should be lost once things are all fixed up. -- Frank Sweetser fs at wpi.edu, fs at suave.net | $ x 18 Full-time WPI Network Engineer, Part time Linux/Perl guy | Soitainly. I was assuming that came with the OO-ness of it. -- Larry Wall in <199710011802.LAA21692(a)wall.org>

1 0