- WLUG - wlug.mailman3.com

Re: [Wlug] type1 fonts...
by Wesley Allen Aug. 3, 2001

Aug. 3, 2001

---------- Original Message ---------------------------------- From: Skip Gaede <sgaede(a)mediaone.net> Reply-To: wlug(a)mail.wlug.org Date: Fri, 3 Aug 2001 08:17:20 -0400 >On Friday 03 August 2001 08:05, Skip wrote: >> On Thursday 02 August 2001 17:18, Wesley Allen wrote: >> > Hello all, >> > I've got some nice type 1 fonts that I want to insert for use in X >> > and in ghostscript. Can anyone run though the right command sequences to >> > do this? >> >> Sure, Wes. It really isn't difficult, and you'll be pleased to know there >> are many ways you can do it. Have you found the web site >> http://www.linuxdoc.org yet? At linuxdoc there is an excellent set of >> documentation that's well written and easy to understand. They have a >> search engine, and entering Type 1 fonts should lead you to a HOWTO on how >> to do it. >> >> Have said that, two things need to happen: >> >> 1) X has to know where to find the fonts >> 2) The directory needs to have a special file called fonts.dir >> >> rm -f fonts.dir && ttmkfontdir . > >Before someone else jumps on this, the above line should have read > >(in the directory where your fonts are located, type) > >rm -f fonts.dir && mkfontdir . > >(The other command was for TrueType fonts!) > >--Skip >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug Skip, I was already doing what you said, but my fonts.dir file is consistently coming up with "0" as the number of fonts in the directory. Any ideas as to why? Wes

3 2

type1 fonts...
by Wesley Allen Aug. 3, 2001

Aug. 3, 2001

Hello all, I've got some nice type 1 fonts that I want to insert for use in X and in ghostscript. Can anyone run though the right command sequences to do this? Thanks, Wes

2 2

ipaq and QTe
by Brad Noyes Aug. 1, 2001

Aug. 1, 2001

Hey Gang, I finally installed linux on my ipaq, and installed QT embedded last night, and part of this morning. I like it so far, there are a few things that are missing, one of which i find to be a real big down side. I can't seem to turn off the back light. I don't want all my batter sucked up from the backlight. Anyone else have this problem know how to fix this, or have any suggestions? i was also wondering if anyone knows of any/some good sync tools, for linux, and the ipaq. Thanks, --Brad

2 1

length of meetings
by Orion Aug. 1, 2001

Aug. 1, 2001

How long do the monthly meetings last? I'm stuck working third shift, and I have to be at work at 11pm. (and I'm guessing a 45 minute drive) *whine* Looking forward to being able to attend sometime... -- Aaron Haviland orion [at] tribble [dot] dyndns [dot] org orion [at] parsed [dot] net "Firelight --- ooooooooohhh."

2 1

Re: [Wlug] cable mode and firewall...
by Wesley Allen July 31, 2001

July 31, 2001

That did it! I knew they were a bit screwy there. Do you know if they consider NAT a "proxy"? If they do they can kiss my business goodbuy, I'm not leaving windows unguarded, and 2 firewalls is better than one in linux! Thanks for the help! Wes ---------- Original Message ---------------------------------- From: Chad Pytel <cpytel(a)WPI.EDU> Reply-To: wlug(a)mail.wlug.org Date: Mon, 30 Jul 2001 20:51:12 -0400 >The cable modem that I have from charter (Motorola Surfboard 4100) cache's >and locks onto one MAC address. You need to reboot the cable modem by >unplugging it and plugging it back in (Or going to the modem's webpage at >http://192.168.100.1 and restarting it). Not sure if this is your problem, >but in people questions about Charter I haven't heard anyone mention this >"feature" of the modem their handing out now. > >Hope this helps, >-Chad > >On Monday 30 July 2001 08:23 pm, you wrote: >> Hi, >> I just got broadband at home and am loving every minute of it. But I'm >> hitting one snag... >> >> I dusted off an old sonicwall we had lying around at my job and got >> permission to take it home, after hacking the firewall I got everything set >> up and ready to go, my wan was hooked up to the cable modem, my lan was >> hooked up to the hub, the dhcp server was set up, and I had NAT w/dhcp >> client as the default setting. So I reboot the firewall and it doesn't get >> an ip address! I erase any trace of the older, static, settings, and try >> again, noting. Has anyone else got this problem? I'm stuck with Char er >> communications, do they have some way to avoid giving addresses to >> firewalls; if so, hello DSL my wife is tied to windows and I'm not shelling >> out money for something that comes built into linux. >> >> Thanks, >> Wes >> _______________________________________________ >> Wlug mailing list >> Wlug(a)mail.wlug.org >> http://mail.wlug.org/mailman/listinfo/wlug >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug >

2 1

cable mode and firewall...
by Wesley Allen July 31, 2001

July 31, 2001

Hi, I just got broadband at home and am loving every minute of it. But I'm hitting one snag... I dusted off an old sonicwall we had lying around at my job and got permission to take it home, after hacking the firewall I got everything set up and ready to go, my wan was hooked up to the cable modem, my lan was hooked up to the hub, the dhcp server was set up, and I had NAT w/dhcp client as the default setting. So I reboot the firewall and it doesn't get an ip address! I erase any trace of the older, static, settings, and try again, noting. Has anyone else got this problem? I'm stuck with Charter communications, do they have some way to avoid giving addresses to firewalls; if so, hello DSL my wife is tied to windows and I'm not shelling out money for something that comes built into linux. Thanks, Wes

2 1

Re: [Wlug] HELP ME
by Wesley Allen July 31, 2001

July 31, 2001

---------- Original Message ---------------------------------- From: "Michael and Sharon Burns" <vze2b2jw(a)verizon.net> Date: Mon, 30 Jul 2001 14:33:05 -0400 >I have a copy of Mandrake 7.2 . >Will some one please help me install it? >I can get it installed but cannot get it to go on line. >i have dsl, and it recognises my network card but will not configure it . 7.2 had some problems with DSL as far as I can remember, and do you know what type of network card you've got? Mandrake snags just about any kind, though my usb nic had to be hand configured even though it knew what it was. I've got a couple of copies of 8.0, it got my cable service up and running w/ no problems. > >I also am stuck with a winmodem. My advice with the winmodem...take it out, nail it to the wall, and smile when you think of how you don't need to use it anymore... > > > >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug >

1 0

HELP ME
by Michael and Sharon Burns July 31, 2001

July 31, 2001

I have a copy of Mandrake 7.2 . Will some one please help me install it? I can get it installed but cannot get it to go on line. i have dsl, and it recognises my network card but will not configure it . I also am stuck with a winmodem.

5 4

apache server
by jim stith July 28, 2001

July 28, 2001

dan; yes, i can ping client to server and server to client. i looked at ipchains -L -n and the only source other than 0.0.0.0/0 was 192.168.1.1 which is the ip address of the server and the target was accept at ports 53 -> *. the other accept was prot all source 0.0.0.0/0 and ports n/a. everything else had target of reject (tcp udp) et.al. chain forward policy is accept chain output policy is accept now to be honest with you, i haven't much of a clue what the above means. hopefully, you do. any more help muchly appreciated. jim s

1 0

Firewall Script hacking (LONG)
by Paul Gelinas July 27, 2001

July 27, 2001

Hi, I've been meaning to do this for months, so here goes: Many of you (like me) probably use Bob Ziegler's firewall scripts (or some variant/derivative thereof) for maintaining your firewall. These scripts (particularly the IANA listings) need to be updated periodically.

1 0

Fwd: [Don.Reagan@trw.com: Need help on a Linux issue]
by Andy Stewart July 26, 2001

July 26, 2001

HI gang, If anybody feels like writing an answer to this technical question, you have a chance of getting it published in SysAdmin magazine. If you're interested, directly contact Don.Reagan(a)trw.com ASAP. Thanks, Andy ---------- Forwarded Message ---------- Subject: [Don.Reagan(a)trw.com: Need help on a Linux issue] Date: Wed, 25 Jul 2001 16:58:41 -0400 From: <arr(a)oceanwave.com> To: andystewart(a)mediaone.net Howdy, Liz (your sister) said you'd be the man who may know the answer to this. I write a column (Q&A) for SysAdmin magazine, but I'm not a Linux person and know diddly about their printing stuff. If you can answer this guy's question (cc me) and it's a sufficiently complex answer, I'll be happy to print it in the next issue I write up. If you're not interested, thanks for reading this far, and sorry for bothering you. :} ------- start of forwarded message (RFC 934 encapsulation) ------- Importance: Normal From: "Don Reagan" <Don.Reagan(a)trw.com> To: <jrmckins(a)yahoo.com>, <arr(a)oceanwave.com> Subject: Need help on a Linux issue Date: Wed, 25 Jul 2001 11:47:31 -0700 This is a multi-part message in MIME format. - ------=_NextPart_000_001C_01C114FF.9640F520 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit I am a reader of the Sys Admin magazine. I was wondering if you can help me on a Linux issue. I can't print to a networked HP LJ 5Si printer. Notes: I Can ping the printer. I can ping all network resources. Printer is in the same hub as my computer. Tried to setup printer on computer using CUPS, LPR, PDQ, PRINTTOOL, and Mandrake Hardware setup tool. CUPS asks me for a command line. I tried something like "IPP://PrintServer/PrinterName:9100" Also with the word socket in the front. None of the examples I have seen ask for the IP. I tried one command line with the IP but it didn't work. None of the documentation is clear on networked HP printers. It seems like I have tried every combination. Tried a raw IP print to the printer "lpr raw(a)123.123.123.123 test" Printer runs these protocols: Netware, TCP/IP, AppleTalk, and LAT. We print to this printer in Windows using a Windows 2000 print server. I am the maverick I want to dual boot Windows and Linux. Using CUPS (Common Unix Printing Service) with IPP, Socket, and other setup lines. Not sure of the command line for this. I tried editing the /etc/printcap, and /etc/printrc files. I Got the PDD for the HP 5Si printer. I thought maybe my editing of printcap or printrc was stopping the CUPS or other methods of setup from working so I went back to the original copies. Oh ya, before you say something simple like read the print man page--I did, also I went to Mandrake documentation, HP printing for Unix web page, read the documentation at Linuxprinting.org web site, Read the printing documentation at Red Hat web site. Not sure it is a HP Jetdirect network card in the printer. Though I suspect I could use HP Jetdirect software to set it up on a Windows machine. I guess what I really need is someone who has printed from a Linux variant to a networked HP printer. Everything I read says this is traditionally a hard issue because of varies issues. Compatibility has been an issue. System: Mandrake Linux v8 full install, Dell GX110 computer. 3Com905 network card. Thank you, Don Reagan Senior Systems Administrator 310.812.6273, don.reagan(a)trw.com TRW Systems/IIT (S&ITG) One Space Park, R2/1015C, Redondo Beach, CA. 90278 -- Andy Stewart Founder Worcester Linux Users' Group Worcester, MA, USA http://www.wlug.org

3 2

Fwd: Call for Papers: 2002 USENIX Annual Technical Conference
by Andy Stewart July 26, 2001

July 26, 2001

---------- Forwarded Message ---------- Subject: Call for Papers: 2002 USENIX Annual Technical Conference Date: Wed, 25 Jul 2001 15:50:25 -0700 From: Usenix Assocation <mktgadm(a)usenix.org> To: astewart(a)world.std.com Attn: Worcester Linux Users' Group Dear Worcester Linux Users' Group, Below is a conference announcement and Call for Papers for the 2002 USENIX Annual Tehcnical Conference. Please let me know if you have a more appropriate method for submitting this information. Thank you for your assistance! Best Regards, Alexandra Szczepanski USENIX Association/SAGE 2560 Ninth Street, Suite 215 Berkeley, CA. 94710 ph (510) 528-8649 fx (510) 548-5738 www.usenix.org ----------------------------------------------------------- 2002 USENIX Annual Technical Conference June 9-14, 2002 Monterey, CA http://www.usenix.org/events/usenix02/ The 2002 USENIX Technical Conference seeks original and innovative papers about the applications, architecture, implementation, and performance of modern computing systems. As at all USENIX conferences, papers that analyze problem areas and draw important conclusions from practical experience are especially welcome. Some particularly interesting application topics are: *Cluster computing *File systems and storage systems *Complexity management *Distributed caching and replication *Mobile code *Mobile/Wireless computing *Multimedia *Networking and network services *Reliability and QoS *Security and privacy *Ubiquitous computing *usage studies *Web technologies *Energy/Power Management *Interoperability of heterogeneous systems FREENIX is a special track within the USENIX Annual Technical Conference that showcases the latest developments and applications in freely redistributed technology. The FREENIX track covers the full range of software and source code including but not limited to Apache, Darwin, FreeBSD, GNOME, GNU, KDE, Linux, NetBSD, OpenBSD, Perl, PHP, Python, Samba, Tcl/Tk and more. FREENIX is looking for papers about projects with a solid emphasis on nurturing the open source/freely available software community and talks which advance the state of the art of freely redistributable software. Areas of interest include, but are not limited to: *Cross-platform source portability and binary compatibility *Desktop metaphors *Distributed and parallel systems *Documentation *File system design *Highly-available systems *Graphical user interface tools *Storage Systems *Highly-scalable and clustered systems *Security *System and user management tools *Quality Assurance *Large scale system management *Print Systems *Free Software development/mgmt *Operating system design *Interesting deployments of free software Submission guidelines and conference details are available on our website: http://www.usenix.org/events/usenix02/cfp/ Submissions to the Freenix Track are due on November 12, 2001. Submissions to the General Refereed Sessions Track are due on November 19, 2001. Join us in developing the best technical conference program of 2002! ==================================================================== The 2002 USENIX Annual Technical Conference is sponsored by USENIX, The Advanced Computing Systems Association. www.usenix.org ==================================================================== ------------------------------------------------------- -- Andy Stewart Founder Worcester Linux Users' Group Worcester, MA, USA http://www.wlug.org

1 0

easter egg in staroffice 5.2 calc...
by Keller, Tim July 26, 2001

July 26, 2001

(got this off the boston linux users group mail) type =GAME("StarWars") into a cell in StarOffice calc and see what happens Note: I don't have staroffice 5.2 so I can't confirm it... Tim.

5 5

Jobs
by Doctor Orbitz July 25, 2001

July 25, 2001

Hello, does anyone know of companies in the Worcester area looking for people with programming/web/*NIX skills, or of a good place to find consulting type jobs? As in making a webpage, seting up servers, etc for somebody. I'm looking for something to put my knowledge to. Thanks, Orbitz

4 3

apache
by stith July 23, 2001

July 23, 2001

i am trying to set up a server using apache. at this point i do not want it to be connected to the internet so i am trying to use a second computer to log on with. here is what i have set up: 1. server ip=192.168.1.1 ( i am using the ip and by-passing name resolution at this point). i can ping 192.168.1.1 from the server as well as localhost. i can also get the default html page up. the only changes i have made to http.conf is: a. Listen *:80 b. ServerName 192.168.1.1 c. i added the following <Directory "/var/www/html"> Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> i can ping from server to client and client to server. 2. client when i try to log on to the server, i get 'netscapes network connection was refused by the server 192.168.1.1. the server may not be accepting connections or may be busy.' any help would be appreciated jim stith

2 1

hello
by Jeff Reed July 22, 2001

July 22, 2001

hey everyone. this is jeff from Metro West Boston LUG. just wanted to drop in and say hi. i'll be posting random stuff here and there. happy hacking! -- //- Jeff Reed //- Linux System Asministrator //- Metro West Boston Linux User Group //- jreed(a)linuxbusca.com //- (508)792-6070 //- http://www.linuxbusca.com //- http://www.blu.org //- http://www.wlug.org

1 0

vmware crash
by Michael Long July 21, 2001

July 21, 2001

Hi all, I have had vmware running on my system for a couple of weeks. Tonight when starting vmware my system locked up (no keyboard or mouse response) and I had to press the reset key. After bring the system up when I attempt to 'power on' vmware I get a message that says: Could not open /dev/vmnet0: No such device. How do I make this device available? After the reboot it was necessary to issue 'insmod vmmon'. Thanks, Mike

3 4

Fwd: 5th Annual Linux Showcase and Conference
by Andy Stewart July 21, 2001

July 21, 2001

---------- Forwarded Message ---------- Subject: 5th Annual Linux Showcase and Conference Date: Fri, 20 Jul 2001 10:26:06 -0700 From: Usenix Assocation <mktgadm(a)usenix.org> To: astewart(a)world.std.com Attn: Worcester Linux Users' Group Dear Worcester Linux Users' Group, I was hoping you could forward the following ALS conference information (below) to your local user group. Please let me know if you have a more appropriate method for submitting this information. (ie, a calendar of conferences/events page) Thank you for your assistance! Best Regards, Alexandra Szczepanski USENIX Association 2560 Ninth Street, Suite 215 Berkeley, CA. 94710 ph (510) 528-8649 fx (510) 548-5738 http://www.usenix.org ++++++++++++++++ Join the people who made Linux happen! 5th Annual Linux Showcase and Conference November 5-10, 2001 Oakland Convention Center, Oakland, CA http://www.linuxshowcase.org Each year, the best and the brightest in the Open source and Linux community come together at one technical conference, the Annual Linux Showcase and Conference. Now in its fifth year, ALS continues its remarkable development as the premiere technical Linux conference for savvy system administrators, end users, enthusiasts, and developers. - Enhance your already sophisticated technical skills - Gain mastery of complex techniques and technologies from the experts - Take home the solutions and knowledge to get immediate payoff within your organization. ALS Tutorial Program, November 5-7, 2001 Gain mastery of complex techniques and technologies through in-depth instruction in 12 tutorials delivering immediately useful information. Both full and half-day tutorials are offered. The tutorial program will be followed by three days of technical sessions, an XFree86 technical conference and a free vendor exhibition showcasing the products and services of over 70 top Linux companies including Compaq, Hewlett-Packard Company, Red Hat, Inc., Sun Microsystems, Inc., SuSE Inc. and VA Linux Systems Inc. For the complete conference schedule and to register visit: http://www.linuxshowcase.org Platinum Sponsors: Compaq VA Linux Hewlett-Packard Media Sponsors: Dr.Dobb's Journal Linux Journal Linux Magazine SysAdmin Magazine UserFriendly.org =============================================================== 5th Annual Linux Showcase & Conference (ALS 2001) is sponsored by USENIX, the Advanced Computing Systems Association, and the Atlanta Linux Showcase, in cooperation with Linux International. =============================================================== ------------------------------------------------------- -- Andy Stewart Founder Worcester Linux Users' Group Worcester, MA, USA http://www.wlug.org

1 0

Full analysis of the .ida "Code Red" worm. (fwd)
by Michelle Vadeboncoeur July 19, 2001

July 19, 2001

For that "New IIS Exploit" thread: -Michelle, who just had to condense this info for another (non-technical) mailing list after the much awaited .au site got hit within hours of the site going up... ---------- Forwarded message ---------- Date: Wed, 18 Jul 2001 22:40:11 -0700 From: Marc Maiffret <marc(a)eeye.com> To: BUGTRAQ <BUGTRAQ(a)securityfocus.com> Subject: Full analysis of the .ida "Code Red" worm. The following is a detailed analysis of the "Code Red" .ida worm that we reported on July 17th 2001. This analysis was performed by Ryan Permeh and Marc Maiffret of eEye Digital Security. The disassembly (complete with comments) was done by Ryan "Shellcode Ninja" Permeh. Table of Contents ================= 1. Introduction 2. Explanation 3. Commentary 4. Deep Analysis 5. Conclusion 6. Appendix 7. Credits You can get a copy of this analysis, commented disassembly, full IDA database, and binary of worm from http://www.eeye.com/html/advisories/codered.zip Introduction ============ On Friday July 13th we received packet logs and information from 2 network administrators that were experiencing large amounts of attacks targeting the recent .ida vulnerability that eEye Digital Security discovered (http://www.eeye.com/html/Research/Advisories/AD20010618.html) on June 18, 2001. After reviewing the logs sent to us we determined that in fact someone had released a worm into the Internet that was spreading rapidly through IIS web servers. The full analysis of the .ida "Code Red" worm has provided numerous new details as to the functionality and method of propagation of this worm. For instance this worms purpose ultimately seems to be to perform a denial of service attack against www.whitehouse.gov. Also it has been found that only US English Windows NT/2000 systems will show the defaced ("Hacked by Chinese !") web page. We've designated this the .ida "Code Red" worm, because part of the worm is designed to deface web pages with the text "Hacked by Chinese" and also because code red mountain dew was the only thing that kept us awake all last night to be able to disassemble this exploit even further. Explanation =========== As stated earlier the .ida "Code Red" worm is spreading throughout IIS web servers on the Internet via the .ida buffer overflow attack that was published weeks ago. The following are the steps that the worm takes once it has infected a vulnerable web server. 1. Setup initial worm environment on infected system. 2. Setup a 100 threads of the worm 3. The first 99 threads are used to spread the worm (infect other web servers). -The worm spreads itself by creating a sequence of random IP addresses. However, the worm's randomization of IP addresses to attack is not all together random. In fact there seems to be a static seed that the worm uses when generating new IP addresses to try to attack. Therefore every computer infected by this worm is going to go through the same list of random IP addresses to try to infect. The "problem" with that is that the worm is going to end up reinfecting systems and also end up crossing traffic back and forth between hosts to end up creating a denial of service type affect because of the amount of data that will be transferred between all the IP addresses in the sequence of random IP addresses. The worm could have done truly random IP generation and that would have allowed it to infect a lot more systems a lot faster. We are not sure why that was not done but a friend of ours did pose an interesting idea... If the person who wrote this worm owned an IP address that was one of the first hundred or thousand etc... to be scanned then they could setup a sniffer and anytime and IP address tried to connect to port 80 on their IP address they would know that the IP address that connected to them was infected with the worm and they would therefore be able to create a list of the majority of systems that were infected by this worm. 4. The 100th thread checks to see if it is running on a English (US) Windows NT/2000 system. -If the infected system is found to be a English (US) system then the worm will proceed to deface the infected systems website. That means... the local web servers web page will be changed to a message that says Welcome to http://www.worm.com !, Hacked By Chinese!. This hacked web page message will stay "live" on the web server for 10 hours and then disappear and never appear again unless the infected system is re-infected by another host. -If the system is not a English (US) Windows NT/2000 system then the 100th worm thread is also used to infect other systems. 5. Each worm thread checks for c:\notworm -If the file c:\notworm is found, the worm goes dormant. -If the file is not found then each thread will continue to attempt to infect more systems. 6. Each worm thread will now check the infected computers time. -If the time is between 20:00 UTC and 23:59 UTC then the worm will proceed to use this thread to attack www.whitehouse.gov. The attack consists of the infected system sending 100k bytes of data to port 80 of www.whitehouse.gov therefore potentially performing a denial of service attack against www.whitehouse.gov. -If the time is below 20:00 UTC then this worm thread will try to find and infect new web servers. In testing we have calculated that the worm can attempt to infect roughly half a million IP addresses a day and that was a ruff estimate made from using a very slow network. As of writing this document (July 18 6:49pm) we have had reports from administrators that have been probed by over 12 thousand unique hosts. That basically means at least 12 thousand hosts have been infected by this worm. In testing we have seen that sometimes the worm does not execute correctly and will continue to spawn new threads until the infected machine crashes and has to be rebooted. We have not been able to isolate the cause of this behavior. Commentary ========== As we sat and watched this worm spread itself through the Internet we were somewhat dumbfounded as to the number of reported systems being infected. The main reason for that is that this worm is using a, what we thought to be, very well known vulnerability. A patch for this vulnerability has been available for over a month now and at the time of the release of the vulnerability many news agencies ran stories about it therefore trying to spread awareness. Even with all of that though there have still been, at the very least, 12 thousand web servers infected by this worm. So we once again encourage administrators to pay attention to security issues and patch their systems as soon as patches are available for holes. All of this research would not be available if we were not a Full Disclosure company and if the many people who helped us research this worm were against full disclosure. Although we did not release any exploit code for the .ida vulnerability, the computer underground still had no problem creating a devastating worm. In the past we have seen a much higher percentage of patched systems when example exploit code was provided. System administrators do not believe vulnerabilities exist without a public exploit, or until something like this worm happens forcing them to patch their systems. We feel that if the security community moves away from Full Disclosure more incidents like this will happen and everyone will be left in the dark as to what is going on. An example of why full disclosure is so important would be this worm itself. Chances are this worm would have not been discovered if we had not fully disclosed details about the .ida vulnerability, allowing Intrusion Detection System vendors to create signatures for the .ida buffer overflow attack. Because of the way that IIS performs logging (logging a request after processing it), servers hit with this worm will actually have no traces of information left in the IIS log files making tracking this worm (via IIS logs) virtually impossible. The first instances of _anyone_ learning anything useful about this worm was via Intrusion Detection Systems that had signatures based on our .ida vulnerability research which would not have been there if not for full disclosure. The computer underground continues to find vulnerabilities everyday. If full disclosure goes away, then the general security community is left in the dark, and therefore so are administrators. More and more we are seeing an increase in worms attacking the Internet. There have been about 2 or 3 worms in as many months. Worms force computer security to become a global issue. With the rise of the Internet, not only do you have to worry about securing your own systems, you must also be careful of your "neighbors" systems. For instance with this worm even if you have done everything right (installed the .ida patch etc...) your network connection could still be taken down because of the amount of data flooding you from all of the "other guys" who hadn't applied patches and were infected by this worm. It is important to not only maintain your own security but make sure that other people you come in contact with secure their sites. Only with global cooperation to maintain security will the threat of worms start disappear. We received information from "friends" that leads us to believe that this worm is actually a derivative of another worm which was written to exploit the first ever remote IIS buffer overflow (also discovered by eEye Digital Security), the .htr buffer overflow. From reports, the .htr worm had a much smaller infection base and seemed to go under the radar probably because the .htr vulnerability was/is very old. Deep Analysis ============= The following is a very detailed analysis of what the worm is doing at each step of its infection. Full disassembled and commented worm code is available at our website at http://www.eeye.com/html/advisories/codered.zip. It will be provided as both a assembly text dump and as a IDA (Interactive Disassembler) database file. We have chosen not distribute the worm code in this eMail as to not clog up your bandwidth anymore then we already are >:-] Note: We will use CODEREF comments in the analysis to reference where we are in the disassembled code so you can "follow along" with us. The tools that we used to perform this detailed analysis were: IDA (Interactive Disassembler) from www.datarescue.com. IDA is an advanced disassembler that made this analysis possible. MS VC++ debugging environment. We used this to monitor modified pieces of the worm as they interacted with IIS. Ryan's brain + Marc's brain + private eEye tools. No... you cant have any of those. We will be heavily referencing the disassembled worm code in the following analysis. In an attempt to make this easier to understand we have broken the functionality of the worm into 3 parts. The core worm functionality, the worm hack web page functionality and the attack www.whitehouse.gov functionality. Core worm functionality ----------------------- 1. Initial infection vector (i.e. host is vulnerable to the .ida attack and gets hit with this worm). The initial infection starts to take place when a web server, vulnerable to the .ida attack, is hit with a HTTP get request that contains the necessary code to exploit the .ida attack and uses this worm as its payload. At the time of the .ida overflow a systems stack memory will look like the following: <MORE 4E 00> 4E 00 4E 00 4E 00 4E 00 4E 00 4E 00 4E 00 4E 00 4E 00 4E 00 4E 00 4E 00 92 90 58 68 4E 00 4E 00 4E 00 4E 00 4E 00 4E 00 FA 00 00 00 90 90 58 68 D3 CB 01 78 90 90 58 68 D3 CB 01 78 90 90 58 68 D3 CB 01 78 90 90 90 90 90 81 C3 00 03 00 00 8B 1B 53 FF 53 78 EIP is overwritten with 0x7801CBD3 which an address within msvcrt.dll. The code at 0x7801CBD3 disassembles to: call ebx When EIP is overwritten with call ebx it then causes program flow to divert back to the stack. The code on the stack jumps into the worm code that's held in the body of the initial HTTP request. 2. Sets up some initial stack variables CODEREF: seg000:000001D6 WORM At this point we are executing the initial code of the worm. The first thing to happen is that the worm sets up a new stack for its own use. The new stack is 218h bytes, filled with CCh. The worm code then moves on to initialize its function jump table. The entire worm heavily uses an EBP stack based memory offset system. This means that all variables are referenced as EBP-X values. On our website we have a document called worm-ebp.txt that attempts to track stack usage throughout the course of the worm code. 3. Load functions (create the "jump table") CODEREF: seg000:00000203 DataSetup The first thing the worm code does is reference the data portion of the exploit code at EBP-198h. The worm then needs to setup its internal function jump table. A function jump table is a stack based table used to store function addresses. It allows the worm to generate the function addresses at run time (This makes the worm have a better chance of executing cleanly on more systems). The technique used by this worm is what is called an RVA (Relative Virtual Addresses) lookup. Basically this means that all functions, or specifically GetProcAddress, are found within IIS itself. For more details on RVA please consult any good PE (Portable Executable, the executable file format for Microsoft platforms) documentation, or read through the assembly code of this worm. In a nutshell, RVA techniques are used to get the address of GetProcAddress. GetProcAddress is then used to get the address of LoadLibraryA. Between these two functions all other functions that the worm may need can be easily found. The worm uses these two functions to load the following functions: >From kernel32.dll: GetSystemTime CreateThread CreateFileA Sleep GetSystemDefaultLangID VirtualProtect >From infocomm.dll: TcpSockSend >From WS2_32.dll: socket connect send recv closesocket Finally the worm stores the base address of w3svc.dll which it will later use to potentially deface the infected website. 4. Check the number of threads the worm has created. CODEREF: seg000:00000512 FUNC_LOAD_DONE Here the worm seems to perform a WriteClient (Part of the ISAPI Extension API), sending "GET" back to the attacking worm. This possibly could be a way of telling attacking worms that they have successfully infected a new host. Next the worm code will count the number of worm threads already in action. If the number of threads is 100 then control is shifted to the Worm hack web page functionality. If the number of threads is below 100 then the worm creates a new thread. Each new thread is an exact replica of the worm (Using the same code base). The worm now continues its path of execution. 6. Checks for the existence of c:\notworm CODEREF: seg000:0000079D DO_THE_WORK There seems to be a to be built in "lysine deficiency" (See Jurassic Park, or Caesar's paper on this at www.rootkit.com) A "lysine deficiency" is a built in check to keep malicious code from spreading further. In this case the "lysine deficiency" is a check for the existence of the file c:\notworm. If this file exists then the worm will become dormant. This means it will not attempt to make connections out to other IP addresses to try to infect. If this file does not exist then the worm continues onto the next step. 7. Check the infected systems time (computer clock) CODEREF: seg000:00000803 NOTWORM_NO The worm will now check the infected systems local time (in UTC). If the hour is greater then 20:00 UTC then the worm will proceed to goto the first step of the attack www.whitehouse.gov functionality. If the time is less than 20:00 UTC then the worm will attempt to continue to try to infect new systems. 8. Infect a new host (send .ida worm to a "random" IP address on port 80). At this point the worm will resend itself to any IP addresses which it can connect to port 80 on. It uses multiple send()'s so packet traffic may be broken up. On a successful completion of send, it closes the socket and goes to step 6... therefore repeating this loop infinitely. Worm hack webpage functionality ------------------------------- This functionality is called after a hundred threads are spawned within the worm. 1. Check if local system default language is English us then goto step 6 of core worm functionality. CODEREF: seg000:000005FE TOO_MANY_THREADS The first thing the worm does is get the local codepage. A codepage specifies the local operating system language (I.E. English (US), Chinese, German etc...). It then compares the local codepage against 0x409. 0x409 is the codepage for English (US) systems. If the infected system is an English (US) system then the worm will proceed to deface the local systems webpage. If the local codepage is not English (US) then this worm thread will goto step 6 of core worm functionality. 2. Sleep for 2 hours. CODEREF: seg000:00000636 IS_AMERICAN This worm thread now sleeps for 2 hours. We anticipate that this is to allow the other worm threads to attempt to spread the infection before making a presence known via defacing the infected systems webpage. 3. Attempt to modify infected systems webpages in memory. CODEREF: seg000:0000064F HACK_PAGE This worm uses an interesting technique called "hooking" to effectively deface (alter) an infected systems webpages. Hooking is modifying code in memory to point to code that the worm provides. In this case the worm is modifying w3svc.dll to change the normal operation of a function called TcpSockSend. TcpSockSend is what w3svc.dll (IIS core engine) uses to send information back to the client. By modifying this, the worm is able to change data being written back to clients who request web pages of an infected server. To perform hooking, first the worm makes the first 4000h bytes of w3svc.dll's memory writable. In a normal situation the memory for w3svc.dll (and basically all mapped dll's) is read-only. It uses the function VirtualProtect to change the memory of w3svc.dll to be writable, saving the old state to a stack variable. It then uses the saved codebase of w3svc.dll (from step 3 of core worm functionality) as a start point to search the import table (again see PE header documentation) for the address of TcpSockSend. Once the address for TcpSockSend is located the worm then replaces TcpSockSend's actual address with an address within the worm. The address that TcpSockSend now points to is a function within the worm that will return the "Hacked by Chinese !" webpage. The CODEREF for this function is seg000:00000C9A FAKE_TCPSOCKSEND. This thread of the worm now sleeps for 10 hours. During this 10 hours all web requests to the infected server will return the "Hacked by chinese !" webpage. After the 10 hours is up this thread will return w3svc.dll to its original state, including re-protecting memory. Execution after this proceeds to step 6 of the core worm functionality. Attack www.whitehouse.gov functionality --------------------------------------- Sooner or later every thread within the worm seems to shift its attacking focus to www.whitehouse.gov. 1. create socket and connect to www.whitehouse.gov on port 80 and send 100k byes of data CODEREF: seg000:000008AD WHITEHOUSE_SOCKET_SETUP Initially the worm will create a socket and connect to 198.137.240.91 (www.whitehouse.gov/www1.whitehouse.gov) on port 80. CODEREF: seg000:0000092F WHITEHOUSE_SOCKET_SEND If this connection is made then the worm will create a loop that performs 18000h single byte send()'s to www.whitehouse.gov. CODEREF: seg000:00000972 WHITEHOUSE_SLEEP_LOOP After 18000h send()'s the worm will sleep for about 4 and a half hours. It will then repeat the attack against www.whitehouse.gov (goto step one of Attack www.whitehouse.gov functionality). Appendix ======== This is associated information about the "Code Red" worm including how to stop the worm, commentary on the worm, and dispelling common misconceptions about this worm. How to secure your system from this .ida "Code Red" worm? --------------------------------------------------------- Microsoft patch for this .ida vulnerability http://www.microsoft.com/technet/treeview/default.asp?url=/technet/security/ bulletin/MS01-033.asp The worm spreads itself to new vulnerable systems via the .ida vulnerability. Applying this patch will keep your server from being infected. However, as stated earlier, because of the way the worm creates its list of "random" IP addresses to attack, you could still be affected by a high traffic overload denial of service. eEye Digital Security Advisory for .ida vulnerability http://www.eeye.com/html/Research/Advisories/AD20010618.html We initially discovered the .ida vulnerability which is being used by this worm as its infection vector. The above advisory details our research of that specific vulnerability. We worked with Microsoft to help them create a patch for the .ida vulnerability. SecureIIS - Application firewall, stops known and unknown IIS vulnerabilities. http://wwww.eeye.com/secureiis We do produce a product that protects IIS web servers from attack which is one of the reasons that we were so quick to research this worm. Funny enough in our initial testing we couldn't get the worm to work because we forgot we had SecureIIS enabled on the lab web server. heh. I have been infected by this worm what can I do? ------------------------------------------------ The first thing you must do is goto the Microsoft security site, as referenced above, and install the .ida patch ASAP. The worm will remain in memory until you reboot your server so make sure to reboot after installing the .ida patch. I think I am infected, how can I tell? -------------------------------------- An infected system will show an increase in load (processor/network). It will also show a number of external connections (or attempts) to port 80 of random IP addresses. You can see this by doing a "netstat -an" from a MS-DOS prompt. Either way do not take any chances... if your system is missing the .ida patch then install it ASAP and reboot. How to setup your IDS to detect this specific worm? --------------------------------------------------- The following is part of the packet data that is sent for this .ida "Code Red" worm attack: GET /default.ida?NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNN%u9090%u6858%ucbd3%u7801%u9090%u6858%ucbd3%u7801%u9090%u6858%ucbd3% u7801%u9090%u9090%u8190%u00c3%u0003%u8b00%u531b%u53ff%u0078%u0000%u00=a HTTP/1.0 Just add that to your IDS signature database. What are some common misconceptions about the "Code Red" worm? -------------------------------------------------------------- 1. It connects to worm.com. This worm only specifies www.worm.com in the initial HTTP GET request HOST: header and in the defaced page show on English (US) systems. This worm does _not_ connect to www.worm.com. This worm operates completely independent and can spread and infect systems without having a single point of failure. What that means is that this worm will be wild on the Internet until there is a _VERY_ high degree of systems that go and install the .ida patch. 2. This worm is based off of hsj's "proof of concept" .ida exploit. This worm is _NOT_ based off of hsj's "proof of concept" .ida exploit. His exploit code had no worm functionality. It was a simple exploit shell that had little to no implicit functionality. It was designed to prove to administrators the seriousness of this vulnerability so that they would install patches ASAP. Credits ======= Ken Eichman of Chemical Abstracts Service Matthew Asham of Left Coast Systems Corp and a large handful of administrators who gave us much needed data to piece this together. Signed, eEye Digital Security T.949.349.9062 F.949.349.9538 http://eEye.com/Retina - Network Security Scanner http://eEye.com/Iris - Network Traffic Analyzer http://eEye.com/SecureIIS - Stop known and unknown IIS vulnerabilities "Its not a virus! Its a worm!" - z3r0 c00l "Whats this one eat?" - l0rd n1k0n "th1s 0n3 34ts 11S s3rv3rs!" - ch4m3l30n h4ck3rs

1 0

New IIS Exploit??
by Doctor Orbitz July 19, 2001

July 19, 2001

Hey, I have recently been gettign a BUTTLOAD of hits on my web server that look like this: "GET /default.ida?NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN%u9090%u6858%ucbd3%u7801%u9090%u6858%ucbd3%u7801%u9090%u6858%ucbd3%u7801%u9090%u9090%u8190%u00c3%u0003%u8b00%u531b%u53ff%u0078%u0000%u00=a HTTP/1.0" I've just recntly had a ton of requests liek that, is this a new exploit or what?? Orbitz

2 1

Re: [Wlug] Permissions on a file
by ccb＠acm.org July 19, 2001

July 19, 2001

> Check out the 'stat' command and 'stat -t'. Unfortunately it gives full modes in HEX! Some shell hackery: set -- $(ls -l foo) OCTMODE=$(echo "ibase=2;obase=8;$(echo $1 | tr -- '-drlwcxb' '0 1 1 1 ')" | bc) Season to taste. Tweak for hex to octal conversion. ccb -- Charles C. Bennett, Jr. VA LiNUX Systems Systems Engineer, Northeast US 25 Burlington Mall Rd., Suite 300 +1 617 543-6513 Burlington, MA 01803-4145 ccb(a)valinux.com www.valinux.com

4 8

routing question
by Marc Hughes July 19, 2001

July 19, 2001

Hey guys, I add a route like this: route add -net 10.1.0.0/24 gw 66.92.74.135 And it shows up fine in my routing tables... But if the other machine looses it's link to the 10.1.0.* address, my machine tries to route those addresses to it's default route. I think the gateway sends some kind of "It's not here anymore" packet? That's not a big deal since it just gets dropped at my default gateway, but when the link to the 10.1.0.* address comes back up, my machine doesn't ever re-try to get to it through the 66.92.74.135 gateway... Is there a way to force a route so it always goes through the gateway? Even after it does fail? Thanks, -Marc

1 0

Permissions on a file
by Gary J. Hanley July 19, 2001

July 19, 2001

Hello all, Does anyone know how I would go about listing the permissions of a file in octal format instead of symbolic? I need to pass that value to a script somehow, and although I could write a script to do that I didn't want to waste my time if there was already a command to do that. Thanks! -- Gary

2 1

REMINDER: Meeting Wednesday, July 18th, 7 PM
by Andy Stewart July 17, 2001

July 17, 2001

HI everybody, This is a reminder of the upcoming WLUG meeting to be held this Wednesday, July 18th, at 7:00 PM in Kinnicutt Hall at WPI in Worcester, MA. The topic for this meeting will be "Using Digital Cameras with Linux". Marc Hughes will do a presentation / demo with his digital camera. I will then do a quick demo of gimp-print to print the images which Marc takes with his camera. I'll be bringing my Epson Stylus Color Photo 870 printer to the meeting with some 4x6 photo paper. After the meeting, a bunch of us will probably go to the Boynton Restaurant for pizza and beer. See ya there! Andy -- Andy Stewart Founder Worcester Linux Users' Group Worcester, MA, USA http://www.wlug.org

3 2

USB hangs system - requires reboot
by Andy Stewart July 16, 2001

July 16, 2001

HI gang, I just installed SuSE 7.2 Professional and upgraded to the 2.4.6 kernel (SMP). For the very first time, I'm attempting to enable the USB controller on my motherboard to talk to my Epson 870 printer (which has both parallel and USB interfaces). The onboard controller is an 82371AB. I looked and noticed the following kernel modules loaded: usbcore printer usb-uhci I think this is correct. I've enabled verbose debugging messages in the kernel. I looked at /var/log/messages, and it is detecting my printer. Also, I ran a program called usbview and saw the printer there as well. OK so far. I tried: cat some_file > /dev/usblp0 I get about 1 line of output and then my entire system hangs (it completely ignores any keyboard input, mouse movements don't cause cursor movement, and the machine is unaccessible from the network). I end up reaching for the reset button and waiting forever for my disks to fsck (yes, Tim K. I'm seriously considering Reiser fs). :-) I'm not sure I know how to go about debugging this...any suggestions? Oh, by the way, I did insure that there were no parallel port modules in place that might somehow interfere. Thanks in advance, Andy -- Andy Stewart Founder Worcester Linux Users' Group Worcester, MA, USA http://www.wlug.org

2 1