- WLUG - wlug.mailman3.com

give away's and trades!
by Keller, Tim Aug. 5, 2002

Aug. 5, 2002

Trades: A buddy of mine is looking for a 32mb PCI video card. He'd be willing to trade 2, 800mhz pentium 3's. I've also got a 800mhz Pentium 3 with a fan and a socket 370 to socket 1 gender bender I'd be willing to part with for 20 bucks. What's the status on the BBQ? Thanks, Tim.

2 1

WLUG BBQ!!!
by Andy Stewart Aug. 5, 2002

Aug. 5, 2002

Hi Everybody, Although I have not yet updated the WLUG website, the WLUG BBQ is going to happen! The BBQ will be held in Shrewsbury at Doug Waud's house like it was 2 years ago. Directions are forthcoming. Thanks, Doug! Our next meeting of WLUG will be at the BBQ on Thursday, August 22, 2002. The BBQ will start around 6 PM and go until Doug kicks us out (watch it, he has Steve as his bouncer). If you can't make it at 6 PM, show up whenever you can. WLUG will supply the food and munchies and will have sodas on hand. You may BYOB (beer, wine, whatever) if you wish. If you would like to bring a salad or dessert, feel free! Label your container with your name to insure its return. Doug has a swimming pool which we can use, so if you are interested, bring a bathing suit and towel. Its not clear to me if one must actually *wear* the bathing suit. We'll rig up some kind of projection system for a LInux talk of some flavor. It may end up getting used by some of you ASCII Art fanatics, but that's OK too. ;-) What good would a Linux party be without an Internet connection, a projector, and a laptop or three? Please RSVP to me and let me know that you'll be coming. In this way, we can be sure to have enough food on hand. Other party ideas? Send them out to the list! Later, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

2 2

Wireless networking with LInksys WAP11 and WPC11
by Andy Stewart Aug. 4, 2002

Aug. 4, 2002

HI all, I finally got WEP to work with this hardware ! The trick is to download the firmware update to the WAP11 wireless access point and install it. The firmware version is 1.01c and it came out just a few days ago. Now, of course, the install program only runs in Windows. I inquired about non-Windows solutions. One can use tftp to transfer the binary image to the WAP11 to do the firmware upgrade and it does work! One must first disable the WAP11 password and also disable the MAC address filter. Of course, this is totally non-supported, we support windows only, we're sorry for your inconvenience, yada, yada, yada. I'm using the orinoco{_cs} driver without problems. I tried wlan-ng but could not get it to work at all. The configuration of wlan-ng is quite confusing to me. Later, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

1 0

Laptop for Sale
by bryon3245＠netzero.com Aug. 3, 2002

Aug. 3, 2002

I have a very nice IBM Thinkpad for sale: The specs are 900MHZ 256MV or RAM 20 GB hard drive DVD and 3.5 Flppy included 14.1 inch lcd Comes with power supply and is in perfect condition. If you live near wocester I can deliver. I am asking 1200 for it. Any questions feel free to as @ bryon3245(a)netzero.com Thanks -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ .

1 0

test #2
by Frank Sweetser July 31, 2002

July 31, 2002

wlug test #2 for today

1 0

WLUG mailing list
by Frank Sweetser July 31, 2002

July 31, 2002

The WLUG list should be fixed for everyone now. If anyone knows of any problems with it, feel free to email me directly. -- Frank Sweetser fs at wpi.edu, fs at suave.net | $ x 18 Full-time WPI Network Engineer, Part time Linux/Perl guy |

1 0

testing
by Frank Sweetser July 31, 2002

July 31, 2002

test #1 for today

1 0

off-campus test message
by Frank Sweetser July 31, 2002

July 31, 2002

Just another test message to make sure the list is working properly...

1 0

test message
by Frank Sweetser July 31, 2002

July 31, 2002

There's been some issues with the new mail server setup on campus, so this is a test message to make sure it gets out... -- Frank Sweetser fs at wpi.edu, fs at suave.net | $ x 18 Full-time WPI Network Engineer, Part time Linux/Perl guy | Perl has a long tradition of working around compilers. -- Larry Wall in <199708252256.PAA00105(a)wall.org>

1 0

Shell Script Question
by Gary J. Hanley July 23, 2002

July 23, 2002

Greetings! A shell script question: Can anyone tell me the pros & cons of coding your shell scripts to stay in-process instead of spawning a child process when needed? For example, ${VARIABLE##*/} instead of `basename $VARIABLE` I'm trying to use the former as much as possible now but I wasn't exactly sure if that is better, not so safe or just doesn't matter. Thanks! -- Gary

2 2

Looking for a home - 2 sparc classics
by stoffel＠lucent.com July 22, 2002

July 22, 2002

Hi guys, I'm cleaning the garage and I want to get rid of stuff. I've got a pair of sparc classics, probably installed with Linux, plus about 8 or so brand new sun keyboards, somce mice and maybe other stuff. First one to email gets it all. I can try to bring it to the next meeting, or we can arrange a pickup off list. John stoffel(a)lucent.com john(a)stoffel.org

4 5

Debian GNU/Linux -- News -- Debian GNU/Linux 3.0 released
by jeff July 22, 2002

July 22, 2002

<http://www.debian.org/News/2002/20020719> *sob* i'm so happy =] -jeff

2 1

pine/mozilla/htmlview
by Bill Mills-Curran July 22, 2002

July 22, 2002

I recently switched to mozilla 1.0, and I'm having problems getting pine to understand that I want to use mozilla as my URL viewer. In the pine setup, I set the URL viewer to a perl script that I wrote that then runs mozilla. (The script works fine when I run it separately.) When I view a URL in pine, I end up with the KDE browser. The output of "ps" shows that pine is running /usr/bin/htmlview instead of my perl script. Any idea why pine is ignoring my setup? TIA, Bill

1 0

booting off cd/floppy images
by Brad Noyes July 20, 2002

July 20, 2002

Hi All, I have an intersting problem. I have a device (my old iopener) with linux installed and freeBSD (i dual boot). Both installs are really out of date, and i want to re-install linux, but i don't have a cdrom drive, or floppy drive. I only have network connection. Is there a way to add an entry in lilo to boot off a CD image, or floppy image? If anyone sees another way to install linux, i'm all hears. Thanks, --brad

2 1

Brooklyn Bridge for sale on ebay!
by Andy Stewart July 20, 2002

July 20, 2002

Starting bid: $10,000: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=1749445282 Sorry, its off topic, but I really couldn't resist! Later, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

3 2

Wireless question about WEP
by Andy Stewart July 20, 2002

July 20, 2002

Hi all, I got 64 bit encryption between my laptop and my access point working but there is a problem. The password is OK, and I can ping from my laptop to my network with 64-bit WEP enabled. Others on my network can ping the laptop without any problems. The trouble arises when I try to use the link for something useful, like surfing the web. Web pages come over very slowly if they complete at all. On a wired system, the page comes over quickly, so its not the other end of the Internet causing the problem. If I turn off WEP, everything is great. Also, I seem totally unable to make 128 or 256 bit encryption work at all (not even a successful ping) despite the fact that both sides agree on the password. What should I check? I am using the orinoco_cs driver in the 2.4.18 kernel. My hardware is the Linksys WPC11 (version 3.0) and the Linksys WAP11 version 2.2 Thanks, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

3 3

How to set "-dpi 100" for X with kdm
by Andy Stewart July 19, 2002

July 19, 2002

HI all, When I start my SuSE 8.0 system in run level 3, it comes up in textmode. I log in and issue the startx command and KDE comes up. In my ~/.xserverrc file, I have put "-dpi 100" and the X server comes up in 100 dpi mode and I am a happy camper. Now, I think I'd like to have the graphical login from run level 5. kdm comes up with a nice screen, but the X server is only running at 75 dpi. I cannot figure out where to put the 100 dpi setting for this situation. It appears not to read the same files for the xdm/kdm method of starting the X server as it does when one types startx. So, how do I properly setup 100 dpi for kdm/xdm? Later, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

2 2

writing to tape
by Brad Noyes July 19, 2002

July 19, 2002

Hi All, I trying to write a program that will write to tape, but i can't seem to get it to work correctly. i have attached a simple piece of source code that will open a file (or device) and write the string "hello, tape". This program will work with a file, and a floppy device, but not a tape device. can anyone give me some pointers? what do i have to do differently to write to tape? Thanks, --brad

6 11

Question about WLUG BBQ
by Andy Stewart July 19, 2002

July 19, 2002

Hi WLUG, We had a suggestion last night over a few beers that perhaps we could conduct our next Linux meeting in Shrewsbury over a few BBQd burgers, dogs, etc. What do people think of that idea? If this idea is accepted by enough folks, it would be held on the same day and time as our next regularly scheduled meeting. What do folks think of this proposal? Later, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

7 14

Thanks!
by Tim Trachimowicz July 18, 2002

July 18, 2002

Hey folks! Thanks for multiple answers to my question. I ended up using Theo's solution: for i in *_x.*; do mv -f $i `echo $i | sed -e 's/_x././'`; done and it worked perfectly to get the job done. I've since been playing around with a few of the other suggestions to see what would work best next time I need to do soemthing similar. If anything, it's sparked my interest to learn more about shell scripting. Thanks again! --Tim

1 0

Bash help
by Tim Trachimowicz July 18, 2002

July 18, 2002

Hey folks! I have a bunch of files on a server that are in the format "filename_x.dat" and I need to rename them "filename.dat", i.e. strip to last two characters off the filename while maintaining the extension. If it wasn't for the fact that I have about 400 files in multiple directories, I'd do it by hand. However, it's of a somewhat urgent nature - hence this slightly off-topic cry for help! =) I'm pretty sure there's a way to do it via a shell script (I use bash) - the only problem being that I've never written one before. Can anyone point me to a faq/tutorial/website that might explain the process? If it's a trivial task, anyone care to take a stab? Google gave me a few leads, but most aren't helping a lot. Any help is appreciated! Thanks! --Tim

8 7

Reminder: WLUG meeting July 17th (WEDNESDAY)
by Andy Stewart July 16, 2002

July 16, 2002

HI everybody, This month's WLUG meeting will be held on Wednesday, July 17th in Kinnicutt Hall on the WPI campus at 7:00 PM. The topic will be "Wireless Networking" and I'm pretty sure we have a speaker. If you have a laptop with a wireless connection, bring it along. I'll bring my new Linksys access point (WAP11) and my laptop. Bring whatever you think will make this an interesting meeting! After the meeting, we'll make a trip to the Boynton Restaurant for pizza and beer. I hope to see you there! Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

1 0

interesting problem
by Wesley Allen July 16, 2002

July 16, 2002

Shortly after I started using a wireless lan, I began having problems with connecting to my local ip addresses; I'm not sure what's causing it. Internet works FINE, and yet, a couple of minutes after I boot my machine I can't connect to anything in the 192.168 range! It doesn't matter the protocol, smb, http, etc. no connections at all. What's stranger is that my win4lin install, which uses vnet, has no problems at all. What in the world is going on here? Any thoughts? Wes

2 1

Lexmark z22 printing
by Bill Smith July 15, 2002

July 15, 2002

Printing fun... Some of you might already know what I have to say, but I wanted to get this out for those that are in my boat... I am running a Gateway Solo 9100 laptop with Red Hat 7.3 installed. I mentioned a few months back (almost a year ago, now) that I had gotten my Lexmark z22 to print with Red Hat 7.1. One thing that I hate about upgrading RH versions is that it invariably forces me to re-learn things, since Red Hat can't seem to leave current configurations alone. 8\ ANYWAY, for a bunch of Stupid Reasons, I decided that I wanted to make use of the USB port on my z22 instead of the parallel port. Imagine, if you will, the fun I had in trying to get a printer that is barely supported by Linux to be recognized on the USB interface... I went to Lexmark's website and got the Linux drivers. Wouldn't you know it, though, but the drivers make no effort whatsoever to support the USB interface on the printer! After a bit of poking around, I realized that there was a KDE Control Panel! I use Window Maker by default and I was annoyed that control-panel was removed. I went through there and LO! the Lexmark z22 is there, right on the USB interface! 8) Granted, there are a couple snags. It looks like I can print multiple text-only documents with no problem, but if I print a Postscript file, then I have to turn the printer off then turn it on again. Compared to having no printer at all (or worse-yet, having to print from WinDOZE!), I see this as only a minor inconvenience. I'm thinking that this rig is using the foomatic configuration scripts, which may be unacceptable to some. I base this thought on the fact that the driver in use is actually for the Lexmark 3200 series, which (according to the .xml file) may print "a bit too rich"... <shrug> It looks okay for the black text that I'm printing with right now. I just wanted to share what I came across. Any corrections/suggestions are appreciated. (Yes, I went to http://www.linuxprinting.org ...) Best regards, -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- William Smith wsmith-at-chezsmith-dot-com Fall River, MA http://www.chezsmith.com "On the one hand, we'll never experience childbirth. On the other hand, we can open all our own jars." -- Jeff Green, on the difference between men and women * TAG! v3.0 *

1 0

Konqueror enhanced browsing
by Andy Stewart July 14, 2002

July 14, 2002

Hi all, I've noticed in Konqueror that one can type things like: info: ...in the URL field and Konqueror will display info pages. There are others, such as: smb: lan: ftp: man: http: camera: The aforementioned are not listed in the Konqueror enhanced browsing configuration window, and I would guess that they are Konqueror defaults. Is there a definitive list of these? I'm wondering what features I might be missing that I'd like to use! Thanks, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

2 2