- WLUG - wlug.mailman3.com

Building RH7.3 server after 7.0 hacked -second request
by Richard Goodman Oct. 31, 2002

Oct. 31, 2002

SECOND REQUEST Additional information This does not appear to be just a problem with server (A). I cannot send mail between any of my three RH7.3 mail servers, but all will send mail locally, and all will send to / receive from the outside world. I am using a RH7.3 /etc/mail/sendmail.mc except for commenting out the DAEMON-OPTIONS line to allow outside mail, and turning off FEATURE(`accept_unresolvable_domains') Is there some change to the sendmail in RH7.3 of which I am unaware that could cause this? I would appreciate any suggestions of where to even look to solve this problem. ------------------------------ As some of you may recall from a mid-week email, two of my RH7.0 servers were badly hacked Tuesday about 5AM, and I lost ssh and think I received a trojan. Friday the hacking got worse - all outgoing mail was rejected as "relaying denied", so I decided to bite the bullet and format the drive and build a new server. This was made more interesting by the fact the RH7.3 wouldn't finish loading packages until I disconnected my second HD which previously held /var, and my web sites (tried 3-4 times) .. "Kernel unable to reread partition table on /tmp/hdc (device or resource busy)", then hung mid-package loading. Late Saturday afternoon I pulled the plug, and started a RH7.3 install. Midmorning I was done, including security patches and had no internet connection .. couldn't even ping from the server. Fortunately, it was just my ISP picking this time to be down for the first time in months. Now I have one remaining problem which over 8 hours of work has clarified, but not solved. For background, I have the just rebuilt RH7.3 server (A), and two other recently built RH7.3 servers (B) and (C) at a different location and each with its own static IP#, all running sendmail for one or several domains From A - incoming mail seems to be fine From A - I can send mail locally to several domain names that are on the A server From A - I can send email (such as this) out into the world Through A - I have several email addresses which are accessed by others from outside and send mail to another outside address in virtusertable or to an alias which is a list of outside addresses, and these are working From A - I cannot send mail to any of the domains at B or C When I try, I get this on the A sendmail log: Oct 27 19:02:56 bach sendmail[3693]: g9S02uO03693: from=<dick(a)goodman1.net>, size=316, class=0, nrcp ts=1, msgid=<p04310101b9e23f71eb3e(a)[192.168.1.9]>, proto=ESMTP, daemon=MTA, relay=host9.goodman1.net [192.168.1.9] Oct 27 19:03:02 bach sendmail[3695]: g9S02uO03693: SYSERR(root): 11harvard.com. config error: mail l oops back to me (MX problem?) Oct 27 19:03:02 bach sendmail[3695]: g9S02uO03693: to=<r.goodman(a)11harvard.com>, ctladdr=<dick@goodm an1.net> (503/503), delay=00:00:06, xdelay=00:00:06, mailer=esmtp, pri=30316, relay=11harvard.com. [ 66.92.78.250], dsn=5.3.5, stat=Local configuration error Oct 27 19:03:02 bach sendmail[3695]: g9S02uO03693: g9S032O03695: DSN: Local configuration error Oct 27 19:03:02 bach sendmail[3695]: g9S032O03695: to=<dick(a)goodman1.net>, delay=00:00:00, xdelay=00 :00:00, mailer=local, pri=60416, dsn=2.0.0, stat=Sent Oct 27 19:03:02 bach sendmail[3695]: g9S032O03695: to=root, delay=00:00:00, xdelay=00:00:00, mailer= local, pri=60416, dsn=2.0.0, stat=Sent and this on the B or C sendmail log: Oct 27 19:03:47 boron sendmail[8627]: NOQUEUE: goodman1.net [207.224.28.49] did not issue MAIL/EXPN/ VRFY/ETRN during connection to MTA The part about an MX loop seems similar to what I used to get when I first started using sendmail and would forget to configure /etc/mail/local-host-names, but this file, and access and virtusertable on (A) were backed up before the format and restored - and a make done to regenerate the db files. Here's a sample of the bounce message I get, just to be complete: From MAILER-DAEMON(a)localhost.localdomain Sun Oct 27 19:03:02 2002 Return-Path: <MAILER-DAEMON(a)localhost.localdomain> Received: from localhost (localhost) by localhost.localdomain (8.11.6/8.11.6) id g9S032O03695; Sun, 27 Oct 2002 19:03:02 -0500 Date: Sun, 27 Oct 2002 19:03:02 -0500 From: Mail Delivery Subsystem <MAILER-DAEMON(a)localhost.localdomain> Message-Id: <200210280003.g9S032O03695(a)localhost.localdomain> To: postmaster(a)localhost.localdomain To: <dick(a)goodman1.net> MIME-Version: 1.0 Content-Type: multipart/report; report-type=delivery-status; boundary="g9S032O03695.1035763382/localhost.localdomain" Subject: Returned mail: see transcript for details Auto-Submitted: auto-generated (failure) This is a MIME-encapsulated message --g9S032O03695.1035763382/localhost.localdomain The original message was received at Sun, 27 Oct 2002 19:02:56 -0500 from host9.goodman1.net [192.168.1.9] ----- The following addresses had permanent fatal errors ----- <r.goodman(a)11harvard.com> (reason: 553 5.3.5 system config error) ----- Transcript of session follows ----- 553 5.3.5 11harvard.com. config error: mail loops back to me (MX problem?) 554 5.3.5 Local configuration error --g9S032O03695.1035763382/localhost.localdomain Content-Type: message/delivery-status Reporting-MTA: dns; localhost.localdomain Received-From-MTA: DNS; host9.goodman1.net Arrival-Date: Sun, 27 Oct 2002 19:02:56 -0500 Final-Recipient: RFC822; r.goodman(a)11harvard.com Action: failed Status: 5.3.5 Diagnostic-Code: SMTP; 553 5.3.5 system config error Last-Attempt-Date: Sun, 27 Oct 2002 19:03:02 -0500 --g9S032O03695.1035763382/localhost.localdomain Content-Type: message/rfc822 Return-Path: <dick(a)goodman1.net> Received: from [192.168.1.9] (host9.goodman1.net [192.168.1.9]) by localhost.localdomain (8.11.6/8.11.6) with ESMTP id g9S02uO03693 for <r.goodman(a)11harvard.com>; Sun, 27 Oct 2002 19:02:56 -0500 Mime-Version: 1.0 X-Sender: dick(a)pop.goodman1.net Message-Id: <p04310101b9e23f71eb3e(a)[192.168.1.9]> Date: Sun, 27 Oct 2002 20:13:10 -0500 To: r.goodman(a)11harvard.com From: Richard Goodman <dick(a)goodman1.net> Subject: Test #3 Content-Type: text/plain; charset="us-ascii" ; format="flowed" --------------------- Does anyone have any ideas, or requests for more information? I'm not doing too well after about 24 hours [now 3 days], and I'd really like to solve this mystery. Dick

4 4

RE: [Wlug] Newbie to mailing list- Issue with the generation ofgraphsinredhat6.2
by Sudhaker P Oct. 30, 2002

Oct. 30, 2002

Hi Marc, I'll do that. I'll install Xvfb and follow your instructions and will keep you informed on the results. Thank you for your patience and your help. --Peram >From: "Marc Hughes" <HughesM(a)tomsnyder.com> >Reply-To: wlug(a)mail.wlug.org >To: <wlug(a)mail.wlug.org> >Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation >ofgraphsinredhat6.2 >Date: Wed, 30 Oct 2002 15:04:48 -0500 > >Yup > >I believe it's on the RedHat CD's. > >-Marc > >-----Original Message----- >From: Sudhaker P [mailto:perams27@hotmail.com] >Sent: Wednesday, October 30, 2002 2:49 PM >To: wlug(a)mail.wlug.org >Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation >ofgraphsinredhat6.2 > > >Hi Marc, >Is Xvfb a software that I can download and install? > >-Sudhakar > > > > > > > >From: "Marc Hughes" <HughesM(a)tomsnyder.com> > >Reply-To: wlug(a)mail.wlug.org > >To: <wlug(a)mail.wlug.org> > >Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation > >of > >graphsinredhat6.2 > >Date: Wed, 30 Oct 2002 13:40:55 -0500 > > > > > >So you're saying that you can use X on the machine, right? If so, I'd > >look > >other places for the problem. > > > >Double check that your DISPLAY is set properly and access is enabled. > >This > >was the exact same error message I used to get when java couldn't connect > >to the xserver. > > > >I find doing something like this: > > > >nohup Xvfb :1 -screen 0 800x600x24 & > >sleep 5 > >export DISPLAY=localhost:1 > >xhost + > >SERVERCOMMAND <- (Whatever you need to do to start the server) > > > >Is best since it uses a virtual x server instead of the real one. This > >works around your problem, but is probably the "correct" way to do it > >anyways. > > > > > >-Marc > > > >-----Original Message----- > >From: Sudhaker P [mailto:perams27@hotmail.com] > >Sent: Wednesday, October 30, 2002 1:23 PM > >To: wlug(a)mail.wlug.org > >Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation > >of > >graphsinredhat6.2 > > > > > >Hi Marc, > >The KDE for the server was not working for it so I fixed it, removing > >all the rpms and re-installing them, I even reinstalled "gd".So I was > >wondering if any other libraries related to X-server were broken too. > >My output for $ps auwx | grep X is as below > >root 14500 0.0 0.0 2220 980 tty1 S 09:44 0:00 /bin/sh > >/usr/X11R6/bin/startx > >root 14507 0.0 0.0 2344 668 tty1 S 09:44 0:00 xinit > >/etc/X11/xinit/xinitrc -- > >root 14508 0.7 0.3 18156 7956 ? S< 09:44 1:07 /etc/X11/X > >:0 > > > >I'd appreciate your suggestions and comments in this regard. > > > >Thanks, > > > >Peram > > > > > > > > > > > > > > > > >From: "Marc Hughes" <HughesM(a)tomsnyder.com> > > >Reply-To: wlug(a)mail.wlug.org > > >To: <wlug(a)mail.wlug.org> > > >Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation > > >of graphs inredhat6.2 > > >Date: Wed, 30 Oct 2002 10:55:29 -0500 > > > > > >What do you mean when you say it seems broken? Are there other > > >symptoms besides the java connection to it? > > > > > >Can you sit down at the machine and use X? If this is a server, you > > >probably don't want that ability (that's where Xvfb comes in). What > > >Xserver are you running? > > > > > >If you "ps aux |grep X" do you see an xserver running? > > > > > >-Marc > > > > > >-----Original Message----- > > >From: Sudhaker P [mailto:perams27@hotmail.com] > > >Sent: Wednesday, October 30, 2002 10:46 AM > > >To: wlug(a)mail.wlug.org > > >Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation > > >of graphs inredhat6.2 > > > > > > > > >Hi Marc, > > >Thanks for the reply. > > >I agree with you Marc, it is a servlet(I'm sorry about that) and its > > >on the server. The display settings seems to be proper, but my X- > > >server seems to be broken. I'd appreciate if you can guide me to any > > >kind of information with the help of which I can fix the issue of > > >broken X-windows. > > > > > >Thanks, > > > > > >Peram > > > > > > > > > > > > > > > > > > > > > >From: "Marc Hughes" <HughesM(a)tomsnyder.com> > > > >Reply-To: wlug(a)mail.wlug.org > > > >To: <wlug(a)mail.wlug.org> > > > >Subject: RE: [Wlug] Newbie to mailing list- Issue with the > > > >generation of graphs inredhat 6.2 > > > >Date: Wed, 30 Oct 2002 09:16:11 -0500 > > > > > > > >I'm guessing this is a server (the errors you showed before made it > > > >look more like a servlet than an applet)... So are you running X? > > > >If so, when you start the server do you set your DISPLAY variable > > > >correctly? Does > > >the > > > >server process have access to the Xserver? > > > > > > > >If you're not running an Xserver, you need to. Weird, huh? > > > >Without a running X-Server the JRE can't do most graphical > > > >operations, even if > > >those > > > >operations never render to the display. It's a long standing issue > > > >that > > >a > > > >whole lot of people have complained about. What you can do is run > > > >Xvfb > > >... > > > >It's a non graphical X server. It just gives programs an Xserver > > > >to play with, and never displays the results of those programs. > > > > > > > > > > > > > > > > > > > >-Marc > > > > > > > >-----Original Message----- > > > >From: Sudhaker P [mailto:perams27@hotmail.com] > > > >Sent: Wednesday, October 30, 2002 9:08 AM > > > >To: wlug(a)mail.wlug.org > > > >Subject: Re: [Wlug] Newbie to mailing list- Issue with the > > > >generation of graphs inredhat 6.2 > > > > > > > > > > > >Hi, > > > >With reply to my previous mail I've figured out that Java "awt" is > > > >looking for some parameters in X-windows. I think the X is broken. > > > >I'd appreciate if any of you gurus can guide me with fixing of > > > >X-windows. > > > > > > > >Thanks, > > > > > > > >Peram > > > > > > > > > > > > > > > > > > > > > > > > > > > > >From: "Sudhaker P" <perams27(a)hotmail.com> > > > > >Reply-To: wlug(a)mail.wlug.org > > > > >To: wlug(a)mail.wlug.org > > > > >Subject: Re: [Wlug] Newbie to mailing list- Issue with the > > > > >generation of graphs in redhat 6.2 > > > > >Date: Tue, 29 Oct 2002 16:07:13 -0600 > > > > > > > > > >Hi Karl, > > > > >Thanks a lot for the response. > > > > >I'm running it as an applet as in the below mentioned weblogic > > > > >log java.lang.NoClassDefFoundError > > > > > at java.lang.Class.forName0(Native Method) > > > > > at java.lang.Class.forName(Class.java:120) > > > > > at > > > > > > > >java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEn > > > >vi > > > >ronment.java:58) > > > > > at java.awt.Window.<init>(Window.java:189) > > > > > at java.awt.Frame.<init>(Frame.java:315) > > > > > at java.awt.Frame.<init>(Frame.java:262) > > > > > at com.rivenet.graphingaction.Graphit.runGraph2D(Unknown > > >Source) > > > > > at > > > > >com.rivenet.reporting.InformalFundingComparisonGraph.makeGraph(Un > > > > >kn > > > > >ow > > > > >n > > > > >Source) > > > > > at > > > > > > > >jsp_servlet._plan._Model_controller._jspService(_Model_controller.j > > > >av > > > >a:356) > > > > > at weblogic.servlet.jsp.JspBase.service(JspBase.java:27) > > > > > at > > > > > > > >weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStub > > > >Im > > > >pl.java:123) > > > > > at > > > > > > > >weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletC > > > >on > > > >textImpl.java:761) > > > > > at > > > > > > > >weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletC > > > >on > > > >textImpl.java:708) > > > > > at > > > > > > > >weblogic.servlet.internal.ServletContextManager.invokeServlet(Servl > > > >et > > > >ContextManager.java:252) > > > > > at > > > > > > > >weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.j > > > >av > > > >a:346) > > > > > at > > > > > >weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:246) > > > > > at > > > > >weblogic.kernel.ExecuteThread.run(ExecuteThread.java:135) > > > > > > > > > >So I was wondering if "awt" since it needs X to generate graphs > > > > >could be the reason and X might be broken. > > > > > > > > > >In your opinion if x is broken what could the rpms that I need to > > > > >install. I'd appreciate your comments and suggestions. > > > > > > > > > >Thanks, > > > > > > > > > >Peram > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >>From: Karl Hiramoto <karl(a)zoop.org> > > > > >>Reply-To: wlug(a)mail.wlug.org > > > > >>To: wlug(a)mail.wlug.org > > > > >>Subject: Re: [Wlug] Newbie to mailing list- Issue with the > > > > >>generation of graphs in redhat 6.2 > > > > >>Date: Tue, 29 Oct 2002 14:43:56 -0500 (EST) > > > > >> > > > > >> > > > > >>are you running it from the comand line? or an applet? > > > > >> > > > > >>Get any errors on your command line? > > > > >> > > > > >> > > > > >>Did you try on the same machine booting 2.4.16 and 2.4.7 to > > > > >>verify that it is the kernel? > > > > >> > > > > >> > > > > >> > > > > >>On Tue, 29 Oct 2002, Sudhaker P wrote: > > > > >> > > > > >> > Hi , > > > > >> > I've a program that generates graphs with Java 1.3.1_01. The > > > > >> > same > > > > >>program is > > > > >> > able to generate graphs on a machine with RH 6.2 kernel > > > > >> > 2.4.16 but it > > > > >>fails > > > > >> > to generate graphs on a machine with RH 6.2 kernel 2.4.7-10 > > > > >> > on which it > > > > >>used > > > > >> > to generate before. I've installed KDE and gd thinking that > > > > >> > something > > > > >>may > > > > >> > broken in the OS on the jpegs generation part. But that > > > > >> > doesn't seem to help. I'd appreciate if any of you gurus can > > > > >> > guide me in this issue with your comments and suggestions. > > > > >> > > > > > >> > Thanks, > > > > >> > > > > > >> > Peram > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > _____________________________________________________________ > > > > >> > __ > > > > >> > __ > > > > >> > Choose an Internet access plan right for you -- try MSN! > > > > >> > http://resourcecenter.msn.com/access/plans/default.asp > > > > >> > > > > > >> > > > > > >> > _______________________________________________ > > > > >> > Wlug mailing list > > > > >> > Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > > > >> > > > > > >> > > > > >>-- > > > > >> > > > > >>€º°`°º€ø,žž,ø€º°`°º€ø,žž,ø€º°`°º€ø,žž,ø€º°`°º€ø,žž,ø€º°`°º€ø > > > > >>Karl Hiramoto <karl(a)hiramoto.org> > > > > >>Work: 978-425-2090 ext 25 > > > > >>Cell: 508-517-4819 > > > > >>Personal web page: http://karl.hiramoto.org/ > > > > >>Freedom: http://www.technojihad.com/ > > > > >>Zoop Productions: http://www.zoop.org/ > > > > >>KTEQ Rapid City: http://www.kteq.org/ > > > > >>AOL IM ID = KarlH420 Yahoo_IM = karl_hiramoto > > > > >>€º°`°º€ø,žž,ø€º°`°º€ø,žž,ø€º°`°º€ø,žž,ø€º°`°º€ø,žž,ø€º°`°º€ø > > > > >> > > > > >>Confirmed bachelor: > > > > >> A man who goes through life without a hitch. > > > > >> > > > > >> > > > > >>_______________________________________________ > > > > >>Wlug mailing list > > > > >>Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > > > > > > > > > > > > > >_________________________________________________________________ > > > > >Unlimited Internet access -- and 2 months free! Try MSN. > > > > >http://resourcecenter.msn.com/access/plans/2monthsfree.asp > > > > > > > > > > > > > > >_______________________________________________ > > > > >Wlug mailing list > > > > >Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > > > > > > > > > > >_________________________________________________________________ > > > >Internet access plans that fit your lifestyle -- join MSN. > > > >http://resourcecenter.msn.com/access/plans/default.asp > > > > > > > > > > > >_______________________________________________ > > > >Wlug mailing list > > > >Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > > > > > > > > > > >_______________________________________________ > > > >Wlug mailing list > > > >Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > > > > > > > >_________________________________________________________________ > > >Protect your PC - get McAfee.com VirusScan Online > > >http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 > > > > > > > > >_______________________________________________ > > >Wlug mailing list > > >Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > > > > > > > >_______________________________________________ > > >Wlug mailing list > > >Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > > > > >_________________________________________________________________ > >Broadband? Dial-up? Get reliable MSN Internet Access. > >http://resourcecenter.msn.com/access/plans/default.asp > > > > > >_______________________________________________ > >Wlug mailing list > >Wlug(a)mail.wlug.org > >http://mail.wlug.org/mailman/listinfo/wlug > > > > > >_______________________________________________ > >Wlug mailing list > >Wlug(a)mail.wlug.org > >http://mail.wlug.org/mailman/listinfo/wlug > > >_________________________________________________________________ >Surf the Web without missing calls! Get MSN Broadband. >http://resourcecenter.msn.com/access/plans/freeactivation.asp > > >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug > > >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug _________________________________________________________________ Protect your PC - get McAfee.com VirusScan Online http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963

1 0

RE: [Wlug] Newbie to mailing list- Issue with the generation ofgraphsinredhat6.2
by Marc Hughes Oct. 30, 2002

Oct. 30, 2002

Yup I believe it's on the RedHat CD's. -Marc -----Original Message----- From: Sudhaker P [mailto:perams27@hotmail.com] Sent: Wednesday, October 30, 2002 2:49 PM To: wlug(a)mail.wlug.org Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation ofgraphsinredhat6.2 Hi Marc, Is Xvfb a software that I can download and install? -Sudhakar >From: "Marc Hughes" <HughesM(a)tomsnyder.com> >Reply-To: wlug(a)mail.wlug.org >To: <wlug(a)mail.wlug.org> >Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation >of >graphsinredhat6.2 >Date: Wed, 30 Oct 2002 13:40:55 -0500 > > >So you're saying that you can use X on the machine, right? If so, I'd >look >other places for the problem. > >Double check that your DISPLAY is set properly and access is enabled. >This >was the exact same error message I used to get when java couldn't connect >to the xserver. > >I find doing something like this: > >nohup Xvfb :1 -screen 0 800x600x24 & >sleep 5 >export DISPLAY=localhost:1 >xhost + >SERVERCOMMAND <- (Whatever you need to do to start the server) > >Is best since it uses a virtual x server instead of the real one. This >works around your problem, but is probably the "correct" way to do it >anyways. > > >-Marc > >-----Original Message----- >From: Sudhaker P [mailto:perams27@hotmail.com] >Sent: Wednesday, October 30, 2002 1:23 PM >To: wlug(a)mail.wlug.org >Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation >of >graphsinredhat6.2 > > >Hi Marc, >The KDE for the server was not working for it so I fixed it, removing >all the rpms and re-installing them, I even reinstalled "gd".So I was >wondering if any other libraries related to X-server were broken too. >My output for $ps auwx | grep X is as below >root 14500 0.0 0.0 2220 980 tty1 S 09:44 0:00 /bin/sh >/usr/X11R6/bin/startx >root 14507 0.0 0.0 2344 668 tty1 S 09:44 0:00 xinit >/etc/X11/xinit/xinitrc -- >root 14508 0.7 0.3 18156 7956 ? S< 09:44 1:07 /etc/X11/X >:0 > >I'd appreciate your suggestions and comments in this regard. > >Thanks, > >Peram > > > > > > > > >From: "Marc Hughes" <HughesM(a)tomsnyder.com> > >Reply-To: wlug(a)mail.wlug.org > >To: <wlug(a)mail.wlug.org> > >Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation > >of graphs inredhat6.2 > >Date: Wed, 30 Oct 2002 10:55:29 -0500 > > > >What do you mean when you say it seems broken? Are there other > >symptoms besides the java connection to it? > > > >Can you sit down at the machine and use X? If this is a server, you > >probably don't want that ability (that's where Xvfb comes in). What > >Xserver are you running? > > > >If you "ps aux |grep X" do you see an xserver running? > > > >-Marc > > > >-----Original Message----- > >From: Sudhaker P [mailto:perams27@hotmail.com] > >Sent: Wednesday, October 30, 2002 10:46 AM > >To: wlug(a)mail.wlug.org > >Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation > >of graphs inredhat6.2 > > > > > >Hi Marc, > >Thanks for the reply. > >I agree with you Marc, it is a servlet(I'm sorry about that) and its > >on the server. The display settings seems to be proper, but my X- > >server seems to be broken. I'd appreciate if you can guide me to any > >kind of information with the help of which I can fix the issue of > >broken X-windows. > > > >Thanks, > > > >Peram > > > > > > > > > > > > > > >From: "Marc Hughes" <HughesM(a)tomsnyder.com> > > >Reply-To: wlug(a)mail.wlug.org > > >To: <wlug(a)mail.wlug.org> > > >Subject: RE: [Wlug] Newbie to mailing list- Issue with the > > >generation of graphs inredhat 6.2 > > >Date: Wed, 30 Oct 2002 09:16:11 -0500 > > > > > >I'm guessing this is a server (the errors you showed before made it > > >look more like a servlet than an applet)... So are you running X? > > >If so, when you start the server do you set your DISPLAY variable > > >correctly? Does > >the > > >server process have access to the Xserver? > > > > > >If you're not running an Xserver, you need to. Weird, huh? > > >Without a running X-Server the JRE can't do most graphical > > >operations, even if > >those > > >operations never render to the display. It's a long standing issue > > >that > >a > > >whole lot of people have complained about. What you can do is run > > >Xvfb > >... > > >It's a non graphical X server. It just gives programs an Xserver > > >to play with, and never displays the results of those programs. > > > > > > > > > > > > > > >-Marc > > > > > >-----Original Message----- > > >From: Sudhaker P [mailto:perams27@hotmail.com] > > >Sent: Wednesday, October 30, 2002 9:08 AM > > >To: wlug(a)mail.wlug.org > > >Subject: Re: [Wlug] Newbie to mailing list- Issue with the > > >generation of graphs inredhat 6.2 > > > > > > > > >Hi, > > >With reply to my previous mail I've figured out that Java "awt" is > > >looking for some parameters in X-windows. I think the X is broken. > > >I'd appreciate if any of you gurus can guide me with fixing of > > >X-windows. > > > > > >Thanks, > > > > > >Peram > > > > > > > > > > > > > > > > > > > > > >From: "Sudhaker P" <perams27(a)hotmail.com> > > > >Reply-To: wlug(a)mail.wlug.org > > > >To: wlug(a)mail.wlug.org > > > >Subject: Re: [Wlug] Newbie to mailing list- Issue with the > > > >generation of graphs in redhat 6.2 > > > >Date: Tue, 29 Oct 2002 16:07:13 -0600 > > > > > > > >Hi Karl, > > > >Thanks a lot for the response. > > > >I'm running it as an applet as in the below mentioned weblogic > > > >log java.lang.NoClassDefFoundError > > > > at java.lang.Class.forName0(Native Method) > > > > at java.lang.Class.forName(Class.java:120) > > > > at > > > > > >java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEn > > >vi > > >ronment.java:58) > > > > at java.awt.Window.<init>(Window.java:189) > > > > at java.awt.Frame.<init>(Frame.java:315) > > > > at java.awt.Frame.<init>(Frame.java:262) > > > > at com.rivenet.graphingaction.Graphit.runGraph2D(Unknown > >Source) > > > > at > > > >com.rivenet.reporting.InformalFundingComparisonGraph.makeGraph(Un > > > >kn > > > >ow > > > >n > > > >Source) > > > > at > > > > > >jsp_servlet._plan._Model_controller._jspService(_Model_controller.j > > >av > > >a:356) > > > > at weblogic.servlet.jsp.JspBase.service(JspBase.java:27) > > > > at > > > > > >weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStub > > >Im > > >pl.java:123) > > > > at > > > > > >weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletC > > >on > > >textImpl.java:761) > > > > at > > > > > >weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletC > > >on > > >textImpl.java:708) > > > > at > > > > > >weblogic.servlet.internal.ServletContextManager.invokeServlet(Servl > > >et > > >ContextManager.java:252) > > > > at > > > > > >weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.j > > >av > > >a:346) > > > > at > > > >weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:246) > > > > at > > > >weblogic.kernel.ExecuteThread.run(ExecuteThread.java:135) > > > > > > > >So I was wondering if "awt" since it needs X to generate graphs > > > >could be the reason and X might be broken. > > > > > > > >In your opinion if x is broken what could the rpms that I need to > > > >install. I'd appreciate your comments and suggestions. > > > > > > > >Thanks, > > > > > > > >Peram > > > > > > > > > > > > > > > > > > > > > > > > > > > >>From: Karl Hiramoto <karl(a)zoop.org> > > > >>Reply-To: wlug(a)mail.wlug.org > > > >>To: wlug(a)mail.wlug.org > > > >>Subject: Re: [Wlug] Newbie to mailing list- Issue with the > > > >>generation of graphs in redhat 6.2 > > > >>Date: Tue, 29 Oct 2002 14:43:56 -0500 (EST) > > > >> > > > >> > > > >>are you running it from the comand line? or an applet? > > > >> > > > >>Get any errors on your command line? > > > >> > > > >> > > > >>Did you try on the same machine booting 2.4.16 and 2.4.7 to > > > >>verify that it is the kernel? > > > >> > > > >> > > > >> > > > >>On Tue, 29 Oct 2002, Sudhaker P wrote: > > > >> > > > >> > Hi , > > > >> > I've a program that generates graphs with Java 1.3.1_01. The > > > >> > same > > > >>program is > > > >> > able to generate graphs on a machine with RH 6.2 kernel > > > >> > 2.4.16 but it > > > >>fails > > > >> > to generate graphs on a machine with RH 6.2 kernel 2.4.7-10 > > > >> > on which it > > > >>used > > > >> > to generate before. I've installed KDE and gd thinking that > > > >> > something > > > >>may > > > >> > broken in the OS on the jpegs generation part. But that > > > >> > doesn't seem to help. I'd appreciate if any of you gurus can > > > >> > guide me in this issue with your comments and suggestions. > > > >> > > > > >> > Thanks, > > > >> > > > > >> > Peram > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > _____________________________________________________________ > > > >> > __ > > > >> > __ > > > >> > Choose an Internet access plan right for you -- try MSN! > > > >> > http://resourcecenter.msn.com/access/plans/default.asp > > > >> > > > > >> > > > > >> > _______________________________________________ > > > >> > Wlug mailing list > > > >> > Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > > >> > > > > >> > > > >>-- > > > >> > > > >>¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø > > > >>Karl Hiramoto <karl(a)hiramoto.org> > > > >>Work: 978-425-2090 ext 25 > > > >>Cell: 508-517-4819 > > > >>Personal web page: http://karl.hiramoto.org/ > > > >>Freedom: http://www.technojihad.com/ > > > >>Zoop Productions: http://www.zoop.org/ > > > >>KTEQ Rapid City: http://www.kteq.org/ > > > >>AOL IM ID = KarlH420 Yahoo_IM = karl_hiramoto > > > >>¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø > > > >> > > > >>Confirmed bachelor: > > > >> A man who goes through life without a hitch. > > > >> > > > >> > > > >>_______________________________________________ > > > >>Wlug mailing list > > > >>Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > > > > > > > > > > >_________________________________________________________________ > > > >Unlimited Internet access -- and 2 months free! Try MSN. > > > >http://resourcecenter.msn.com/access/plans/2monthsfree.asp > > > > > > > > > > > >_______________________________________________ > > > >Wlug mailing list > > > >Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > > > > > > > >_________________________________________________________________ > > >Internet access plans that fit your lifestyle -- join MSN. > > >http://resourcecenter.msn.com/access/plans/default.asp > > > > > > > > >_______________________________________________ > > >Wlug mailing list > > >Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > > > > > > > >_______________________________________________ > > >Wlug mailing list > > >Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > > > > >_________________________________________________________________ > >Protect your PC - get McAfee.com VirusScan Online > >http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 > > > > > >_______________________________________________ > >Wlug mailing list > >Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > > > > >_______________________________________________ > >Wlug mailing list > >Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > >_________________________________________________________________ >Broadband? Dial-up? Get reliable MSN Internet Access. >http://resourcecenter.msn.com/access/plans/default.asp > > >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug > > >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug _________________________________________________________________ Surf the Web without missing calls! Get MSN Broadband. http://resourcecenter.msn.com/access/plans/freeactivation.asp _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

RE: [Wlug] Newbie to mailing list- Issue with the generation of graphsinredhat6.2
by Sudhaker P Oct. 30, 2002

Oct. 30, 2002

Hi Marc, Is Xvfb a software that I can download and install? -Sudhakar >From: "Marc Hughes" <HughesM(a)tomsnyder.com> >Reply-To: wlug(a)mail.wlug.org >To: <wlug(a)mail.wlug.org> >Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation of >graphsinredhat6.2 >Date: Wed, 30 Oct 2002 13:40:55 -0500 > > >So you're saying that you can use X on the machine, right? If so, I'd look >other places for the problem. > >Double check that your DISPLAY is set properly and access is enabled. This >was the exact same error message I used to get when java couldn't connect >to the xserver. > >I find doing something like this: > >nohup Xvfb :1 -screen 0 800x600x24 & >sleep 5 >export DISPLAY=localhost:1 >xhost + >SERVERCOMMAND <- (Whatever you need to do to start the server) > >Is best since it uses a virtual x server instead of the real one. This >works around your problem, but is probably the "correct" way to do it >anyways. > > >-Marc > >-----Original Message----- >From: Sudhaker P [mailto:perams27@hotmail.com] >Sent: Wednesday, October 30, 2002 1:23 PM >To: wlug(a)mail.wlug.org >Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation of >graphsinredhat6.2 > > >Hi Marc, >The KDE for the server was not working for it so I fixed it, removing all >the rpms and re-installing them, I even reinstalled "gd".So I was wondering >if any other libraries related to X-server were broken too. >My output for >$ps auwx | grep X is as below >root 14500 0.0 0.0 2220 980 tty1 S 09:44 0:00 /bin/sh >/usr/X11R6/bin/startx >root 14507 0.0 0.0 2344 668 tty1 S 09:44 0:00 xinit >/etc/X11/xinit/xinitrc -- >root 14508 0.7 0.3 18156 7956 ? S< 09:44 1:07 /etc/X11/X >:0 > >I'd appreciate your suggestions and comments in this regard. > >Thanks, > >Peram > > > > > > > > >From: "Marc Hughes" <HughesM(a)tomsnyder.com> > >Reply-To: wlug(a)mail.wlug.org > >To: <wlug(a)mail.wlug.org> > >Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation > >of > >graphs inredhat6.2 > >Date: Wed, 30 Oct 2002 10:55:29 -0500 > > > >What do you mean when you say it seems broken? Are there other > >symptoms > >besides the java connection to it? > > > >Can you sit down at the machine and use X? If this is a server, you > >probably don't want that ability (that's where Xvfb comes in). What > >Xserver are you running? > > > >If you "ps aux |grep X" do you see an xserver running? > > > >-Marc > > > >-----Original Message----- > >From: Sudhaker P [mailto:perams27@hotmail.com] > >Sent: Wednesday, October 30, 2002 10:46 AM > >To: wlug(a)mail.wlug.org > >Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation > >of > >graphs inredhat6.2 > > > > > >Hi Marc, > >Thanks for the reply. > >I agree with you Marc, it is a servlet(I'm sorry about that) and its on > >the server. The display settings seems to be proper, but my X- server > >seems to be broken. I'd appreciate if you can guide me to any kind of > >information with the help of which I can fix the issue of broken > >X-windows. > > > >Thanks, > > > >Peram > > > > > > > > > > > > > > >From: "Marc Hughes" <HughesM(a)tomsnyder.com> > > >Reply-To: wlug(a)mail.wlug.org > > >To: <wlug(a)mail.wlug.org> > > >Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation > > >of graphs inredhat 6.2 > > >Date: Wed, 30 Oct 2002 09:16:11 -0500 > > > > > >I'm guessing this is a server (the errors you showed before made it > > >look more like a servlet than an applet)... So are you running X? If > > >so, when you start the server do you set your DISPLAY variable > > >correctly? Does > >the > > >server process have access to the Xserver? > > > > > >If you're not running an Xserver, you need to. Weird, huh? Without > > >a running X-Server the JRE can't do most graphical operations, even > > >if > >those > > >operations never render to the display. It's a long standing issue > > >that > >a > > >whole lot of people have complained about. What you can do is run > > >Xvfb > >... > > >It's a non graphical X server. It just gives programs an Xserver to > > >play with, and never displays the results of those programs. > > > > > > > > > > > > > > >-Marc > > > > > >-----Original Message----- > > >From: Sudhaker P [mailto:perams27@hotmail.com] > > >Sent: Wednesday, October 30, 2002 9:08 AM > > >To: wlug(a)mail.wlug.org > > >Subject: Re: [Wlug] Newbie to mailing list- Issue with the generation > > >of graphs inredhat 6.2 > > > > > > > > >Hi, > > >With reply to my previous mail I've figured out that Java "awt" is > > >looking for some parameters in X-windows. I think the X is broken. > > >I'd appreciate if any of you gurus can guide me with fixing of > > >X-windows. > > > > > >Thanks, > > > > > >Peram > > > > > > > > > > > > > > > > > > > > > >From: "Sudhaker P" <perams27(a)hotmail.com> > > > >Reply-To: wlug(a)mail.wlug.org > > > >To: wlug(a)mail.wlug.org > > > >Subject: Re: [Wlug] Newbie to mailing list- Issue with the > > > >generation of graphs in redhat 6.2 > > > >Date: Tue, 29 Oct 2002 16:07:13 -0600 > > > > > > > >Hi Karl, > > > >Thanks a lot for the response. > > > >I'm running it as an applet as in the below mentioned weblogic log > > > >java.lang.NoClassDefFoundError > > > > at java.lang.Class.forName0(Native Method) > > > > at java.lang.Class.forName(Class.java:120) > > > > at > > > > > >java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvi > > >ronment.java:58) > > > > at java.awt.Window.<init>(Window.java:189) > > > > at java.awt.Frame.<init>(Frame.java:315) > > > > at java.awt.Frame.<init>(Frame.java:262) > > > > at com.rivenet.graphingaction.Graphit.runGraph2D(Unknown > >Source) > > > > at > > > >com.rivenet.reporting.InformalFundingComparisonGraph.makeGraph(Unkn > > > >ow > > > >n > > > >Source) > > > > at > > > > > >jsp_servlet._plan._Model_controller._jspService(_Model_controller.jav > > >a:356) > > > > at weblogic.servlet.jsp.JspBase.service(JspBase.java:27) > > > > at > > > > > >weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm > > >pl.java:123) > > > > at > > > > > >weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon > > >textImpl.java:761) > > > > at > > > > > >weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon > > >textImpl.java:708) > > > > at > > > > > >weblogic.servlet.internal.ServletContextManager.invokeServlet(Servlet > > >ContextManager.java:252) > > > > at > > > > > >weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.jav > > >a:346) > > > > at > > > >weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:246) > > > > at > > > >weblogic.kernel.ExecuteThread.run(ExecuteThread.java:135) > > > > > > > >So I was wondering if "awt" since it needs X to generate graphs > > > >could be the reason and X might be broken. > > > > > > > >In your opinion if x is broken what could the rpms that I need to > > > >install. I'd appreciate your comments and suggestions. > > > > > > > >Thanks, > > > > > > > >Peram > > > > > > > > > > > > > > > > > > > > > > > > > > > >>From: Karl Hiramoto <karl(a)zoop.org> > > > >>Reply-To: wlug(a)mail.wlug.org > > > >>To: wlug(a)mail.wlug.org > > > >>Subject: Re: [Wlug] Newbie to mailing list- Issue with the > > > >>generation of graphs in redhat 6.2 > > > >>Date: Tue, 29 Oct 2002 14:43:56 -0500 (EST) > > > >> > > > >> > > > >>are you running it from the comand line? or an applet? > > > >> > > > >>Get any errors on your command line? > > > >> > > > >> > > > >>Did you try on the same machine booting 2.4.16 and 2.4.7 to verify > > > >>that it is the kernel? > > > >> > > > >> > > > >> > > > >>On Tue, 29 Oct 2002, Sudhaker P wrote: > > > >> > > > >> > Hi , > > > >> > I've a program that generates graphs with Java 1.3.1_01. The > > > >> > same > > > >>program is > > > >> > able to generate graphs on a machine with RH 6.2 kernel 2.4.16 > > > >> > but it > > > >>fails > > > >> > to generate graphs on a machine with RH 6.2 kernel 2.4.7-10 on > > > >> > which it > > > >>used > > > >> > to generate before. I've installed KDE and gd thinking that > > > >> > something > > > >>may > > > >> > broken in the OS on the jpegs generation part. But that doesn't > > > >> > seem to help. I'd appreciate if any of you gurus can guide me > > > >> > in this issue with your comments and suggestions. > > > >> > > > > >> > Thanks, > > > >> > > > > >> > Peram > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > _______________________________________________________________ > > > >> > __ > > > >> > Choose an Internet access plan right for you -- try MSN! > > > >> > http://resourcecenter.msn.com/access/plans/default.asp > > > >> > > > > >> > > > > >> > _______________________________________________ > > > >> > Wlug mailing list > > > >> > Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > > >> > > > > >> > > > >>-- > > > >> > > > >>€º°`°º€ø,žž,ø€º°`°º€ø,žž,ø€º°`°º€ø,žž,ø€º°`°º€ø,žž,ø€º°`°º€ø > > > >>Karl Hiramoto <karl(a)hiramoto.org> > > > >>Work: 978-425-2090 ext 25 > > > >>Cell: 508-517-4819 > > > >>Personal web page: http://karl.hiramoto.org/ > > > >>Freedom: http://www.technojihad.com/ > > > >>Zoop Productions: http://www.zoop.org/ > > > >>KTEQ Rapid City: http://www.kteq.org/ > > > >>AOL IM ID = KarlH420 Yahoo_IM = karl_hiramoto > > > >>€º°`°º€ø,žž,ø€º°`°º€ø,žž,ø€º°`°º€ø,žž,ø€º°`°º€ø,žž,ø€º°`°º€ø > > > >> > > > >>Confirmed bachelor: > > > >> A man who goes through life without a hitch. > > > >> > > > >> > > > >>_______________________________________________ > > > >>Wlug mailing list > > > >>Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > > > > > > > > > > >_________________________________________________________________ > > > >Unlimited Internet access -- and 2 months free! Try MSN. > > > >http://resourcecenter.msn.com/access/plans/2monthsfree.asp > > > > > > > > > > > >_______________________________________________ > > > >Wlug mailing list > > > >Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > > > > > > > >_________________________________________________________________ > > >Internet access plans that fit your lifestyle -- join MSN. > > >http://resourcecenter.msn.com/access/plans/default.asp > > > > > > > > >_______________________________________________ > > >Wlug mailing list > > >Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > > > > > > > >_______________________________________________ > > >Wlug mailing list > > >Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > > > > >_________________________________________________________________ > >Protect your PC - get McAfee.com VirusScan Online > >http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 > > > > > >_______________________________________________ > >Wlug mailing list > >Wlug(a)mail.wlug.org > >http://mail.wlug.org/mailman/listinfo/wlug > > > > > >_______________________________________________ > >Wlug mailing list > >Wlug(a)mail.wlug.org > >http://mail.wlug.org/mailman/listinfo/wlug > > >_________________________________________________________________ >Broadband? Dial-up? Get reliable MSN Internet Access. >http://resourcecenter.msn.com/access/plans/default.asp > > >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug > > >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug _________________________________________________________________ Surf the Web without missing calls! Get MSN Broadband. http://resourcecenter.msn.com/access/plans/freeactivation.asp

1 0

RE: [Wlug] Newbie to mailing list- Issue with the generation of graphs inredhat6.2
by Sudhaker P Oct. 30, 2002

Oct. 30, 2002

Hi Marc, The KDE for the server was not working for it so I fixed it, removing all the rpms and re-installing them, I even reinstalled "gd".So I was wondering if any other libraries related to X-server were broken too. My output for $ps auwx | grep X is as below root 14500 0.0 0.0 2220 980 tty1 S 09:44 0:00 /bin/sh /usr/X11R6/bin/startx root 14507 0.0 0.0 2344 668 tty1 S 09:44 0:00 xinit /etc/X11/xinit/xinitrc -- root 14508 0.7 0.3 18156 7956 ? S< 09:44 1:07 /etc/X11/X :0 I'd appreciate your suggestions and comments in this regard. Thanks, Peram >From: "Marc Hughes" <HughesM(a)tomsnyder.com> >Reply-To: wlug(a)mail.wlug.org >To: <wlug(a)mail.wlug.org> >Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation of >graphs inredhat6.2 >Date: Wed, 30 Oct 2002 10:55:29 -0500 > >What do you mean when you say it seems broken? Are there other symptoms >besides the java connection to it? > >Can you sit down at the machine and use X? If this is a server, you >probably don't want that ability (that's where Xvfb comes in). What >Xserver are you running? > >If you "ps aux |grep X" do you see an xserver running? > >-Marc > >-----Original Message----- >From: Sudhaker P [mailto:perams27@hotmail.com] >Sent: Wednesday, October 30, 2002 10:46 AM >To: wlug(a)mail.wlug.org >Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation of >graphs inredhat6.2 > > >Hi Marc, >Thanks for the reply. >I agree with you Marc, it is a servlet(I'm sorry about that) and its on the >server. The display settings seems to be proper, but my X- server seems to >be broken. >I'd appreciate if you can guide me to any kind of information with the help >of which I can fix the issue of broken X-windows. > >Thanks, > >Peram > > > > > > > >From: "Marc Hughes" <HughesM(a)tomsnyder.com> > >Reply-To: wlug(a)mail.wlug.org > >To: <wlug(a)mail.wlug.org> > >Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation > >of > >graphs inredhat 6.2 > >Date: Wed, 30 Oct 2002 09:16:11 -0500 > > > >I'm guessing this is a server (the errors you showed before made it > >look > >more like a servlet than an applet)... So are you running X? If so, when > >you start the server do you set your DISPLAY variable correctly? Does >the > >server process have access to the Xserver? > > > >If you're not running an Xserver, you need to. Weird, huh? Without a > >running X-Server the JRE can't do most graphical operations, even if >those > >operations never render to the display. It's a long standing issue that >a > >whole lot of people have complained about. What you can do is run Xvfb >... > >It's a non graphical X server. It just gives programs an Xserver to play > >with, and never displays the results of those programs. > > > > > > > > > >-Marc > > > >-----Original Message----- > >From: Sudhaker P [mailto:perams27@hotmail.com] > >Sent: Wednesday, October 30, 2002 9:08 AM > >To: wlug(a)mail.wlug.org > >Subject: Re: [Wlug] Newbie to mailing list- Issue with the generation > >of > >graphs inredhat 6.2 > > > > > >Hi, > >With reply to my previous mail I've figured out that Java "awt" is > >looking for some parameters in X-windows. I think the X is broken. I'd > >appreciate if any of you gurus can guide me with fixing of X-windows. > > > >Thanks, > > > >Peram > > > > > > > > > > > > > > >From: "Sudhaker P" <perams27(a)hotmail.com> > > >Reply-To: wlug(a)mail.wlug.org > > >To: wlug(a)mail.wlug.org > > >Subject: Re: [Wlug] Newbie to mailing list- Issue with the generation > > >of graphs in redhat 6.2 > > >Date: Tue, 29 Oct 2002 16:07:13 -0600 > > > > > >Hi Karl, > > >Thanks a lot for the response. > > >I'm running it as an applet as in the below mentioned weblogic log > > >java.lang.NoClassDefFoundError > > > at java.lang.Class.forName0(Native Method) > > > at java.lang.Class.forName(Class.java:120) > > > at > > > >java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58) > > > at java.awt.Window.<init>(Window.java:189) > > > at java.awt.Frame.<init>(Frame.java:315) > > > at java.awt.Frame.<init>(Frame.java:262) > > > at com.rivenet.graphingaction.Graphit.runGraph2D(Unknown >Source) > > > at > > >com.rivenet.reporting.InformalFundingComparisonGraph.makeGraph(Unknow > > >n > > >Source) > > > at > > > >jsp_servlet._plan._Model_controller._jspService(_Model_controller.java:356) > > > at weblogic.servlet.jsp.JspBase.service(JspBase.java:27) > > > at > > > >weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:123) > > > at > > > >weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:761) > > > at > > > >weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:708) > > > at > > > >weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContextManager.java:252) > > > at > > > >weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:346) > > > at > > >weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:246) > > > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:135) > > > > > >So I was wondering if "awt" since it needs X to generate graphs could > > >be the reason and X might be broken. > > > > > >In your opinion if x is broken what could the rpms that I need to > > >install. I'd appreciate your comments and suggestions. > > > > > >Thanks, > > > > > >Peram > > > > > > > > > > > > > > > > > > > > >>From: Karl Hiramoto <karl(a)zoop.org> > > >>Reply-To: wlug(a)mail.wlug.org > > >>To: wlug(a)mail.wlug.org > > >>Subject: Re: [Wlug] Newbie to mailing list- Issue with the > > >>generation of graphs in redhat 6.2 > > >>Date: Tue, 29 Oct 2002 14:43:56 -0500 (EST) > > >> > > >> > > >>are you running it from the comand line? or an applet? > > >> > > >>Get any errors on your command line? > > >> > > >> > > >>Did you try on the same machine booting 2.4.16 and 2.4.7 to verify > > >>that it is the kernel? > > >> > > >> > > >> > > >>On Tue, 29 Oct 2002, Sudhaker P wrote: > > >> > > >> > Hi , > > >> > I've a program that generates graphs with Java 1.3.1_01. The same > > >>program is > > >> > able to generate graphs on a machine with RH 6.2 kernel 2.4.16 > > >> > but it > > >>fails > > >> > to generate graphs on a machine with RH 6.2 kernel 2.4.7-10 on > > >> > which it > > >>used > > >> > to generate before. I've installed KDE and gd thinking that > > >> > something > > >>may > > >> > broken in the OS on the jpegs generation part. But that doesn't > > >> > seem to help. I'd appreciate if any of you gurus can guide me in > > >> > this issue with your comments and suggestions. > > >> > > > >> > Thanks, > > >> > > > >> > Peram > > >> > > > >> > > > >> > > > >> > > > >> > > > >> > > > >> > _________________________________________________________________ > > >> > Choose an Internet access plan right for you -- try MSN! > > >> > http://resourcecenter.msn.com/access/plans/default.asp > > >> > > > >> > > > >> > _______________________________________________ > > >> > Wlug mailing list > > >> > Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > >> > > > >> > > >>-- > > >> > > >>€º°`°º€ø,žž,ø€º°`°º€ø,žž,ø€º°`°º€ø,žž,ø€º°`°º€ø,žž,ø€º°`°º€ø > > >>Karl Hiramoto <karl(a)hiramoto.org> > > >>Work: 978-425-2090 ext 25 > > >>Cell: 508-517-4819 > > >>Personal web page: http://karl.hiramoto.org/ > > >>Freedom: http://www.technojihad.com/ > > >>Zoop Productions: http://www.zoop.org/ > > >>KTEQ Rapid City: http://www.kteq.org/ > > >>AOL IM ID = KarlH420 Yahoo_IM = karl_hiramoto > > >>€º°`°º€ø,žž,ø€º°`°º€ø,žž,ø€º°`°º€ø,žž,ø€º°`°º€ø,žž,ø€º°`°º€ø > > >> > > >>Confirmed bachelor: > > >> A man who goes through life without a hitch. > > >> > > >> > > >>_______________________________________________ > > >>Wlug mailing list > > >>Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > > > > > > > >_________________________________________________________________ > > >Unlimited Internet access -- and 2 months free! Try MSN. > > >http://resourcecenter.msn.com/access/plans/2monthsfree.asp > > > > > > > > >_______________________________________________ > > >Wlug mailing list > > >Wlug(a)mail.wlug.org > > >http://mail.wlug.org/mailman/listinfo/wlug > > > > > >_________________________________________________________________ > >Internet access plans that fit your lifestyle -- join MSN. > >http://resourcecenter.msn.com/access/plans/default.asp > > > > > >_______________________________________________ > >Wlug mailing list > >Wlug(a)mail.wlug.org > >http://mail.wlug.org/mailman/listinfo/wlug > > > > > >_______________________________________________ > >Wlug mailing list > >Wlug(a)mail.wlug.org > >http://mail.wlug.org/mailman/listinfo/wlug > > >_________________________________________________________________ >Protect your PC - get McAfee.com VirusScan Online >http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 > > >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug > > >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug _________________________________________________________________ Broadband? Dial-up? Get reliable MSN Internet Access. http://resourcecenter.msn.com/access/plans/default.asp

2 1

RE: [Wlug] Newbie to mailing list- Issue with the generation of graphsinredhat6.2
by Marc Hughes Oct. 30, 2002

Oct. 30, 2002

So you're saying that you can use X on the machine, right? If so, I'd look other places for the problem. Double check that your DISPLAY is set properly and access is enabled. This was the exact same error message I used to get when java couldn't connect to the xserver. I find doing something like this: nohup Xvfb :1 -screen 0 800x600x24 & sleep 5 export DISPLAY=localhost:1 xhost + SERVERCOMMAND <- (Whatever you need to do to start the server) Is best since it uses a virtual x server instead of the real one. This works around your problem, but is probably the "correct" way to do it anyways. -Marc -----Original Message----- From: Sudhaker P [mailto:perams27@hotmail.com] Sent: Wednesday, October 30, 2002 1:23 PM To: wlug(a)mail.wlug.org Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation of graphsinredhat6.2 Hi Marc, The KDE for the server was not working for it so I fixed it, removing all the rpms and re-installing them, I even reinstalled "gd".So I was wondering if any other libraries related to X-server were broken too. My output for $ps auwx | grep X is as below root 14500 0.0 0.0 2220 980 tty1 S 09:44 0:00 /bin/sh /usr/X11R6/bin/startx root 14507 0.0 0.0 2344 668 tty1 S 09:44 0:00 xinit /etc/X11/xinit/xinitrc -- root 14508 0.7 0.3 18156 7956 ? S< 09:44 1:07 /etc/X11/X :0 I'd appreciate your suggestions and comments in this regard. Thanks, Peram >From: "Marc Hughes" <HughesM(a)tomsnyder.com> >Reply-To: wlug(a)mail.wlug.org >To: <wlug(a)mail.wlug.org> >Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation >of >graphs inredhat6.2 >Date: Wed, 30 Oct 2002 10:55:29 -0500 > >What do you mean when you say it seems broken? Are there other >symptoms >besides the java connection to it? > >Can you sit down at the machine and use X? If this is a server, you >probably don't want that ability (that's where Xvfb comes in). What >Xserver are you running? > >If you "ps aux |grep X" do you see an xserver running? > >-Marc > >-----Original Message----- >From: Sudhaker P [mailto:perams27@hotmail.com] >Sent: Wednesday, October 30, 2002 10:46 AM >To: wlug(a)mail.wlug.org >Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation >of >graphs inredhat6.2 > > >Hi Marc, >Thanks for the reply. >I agree with you Marc, it is a servlet(I'm sorry about that) and its on >the server. The display settings seems to be proper, but my X- server >seems to be broken. I'd appreciate if you can guide me to any kind of >information with the help of which I can fix the issue of broken >X-windows. > >Thanks, > >Peram > > > > > > > >From: "Marc Hughes" <HughesM(a)tomsnyder.com> > >Reply-To: wlug(a)mail.wlug.org > >To: <wlug(a)mail.wlug.org> > >Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation > >of graphs inredhat 6.2 > >Date: Wed, 30 Oct 2002 09:16:11 -0500 > > > >I'm guessing this is a server (the errors you showed before made it > >look more like a servlet than an applet)... So are you running X? If > >so, when you start the server do you set your DISPLAY variable > >correctly? Does >the > >server process have access to the Xserver? > > > >If you're not running an Xserver, you need to. Weird, huh? Without > >a running X-Server the JRE can't do most graphical operations, even > >if >those > >operations never render to the display. It's a long standing issue > >that >a > >whole lot of people have complained about. What you can do is run > >Xvfb >... > >It's a non graphical X server. It just gives programs an Xserver to > >play with, and never displays the results of those programs. > > > > > > > > > >-Marc > > > >-----Original Message----- > >From: Sudhaker P [mailto:perams27@hotmail.com] > >Sent: Wednesday, October 30, 2002 9:08 AM > >To: wlug(a)mail.wlug.org > >Subject: Re: [Wlug] Newbie to mailing list- Issue with the generation > >of graphs inredhat 6.2 > > > > > >Hi, > >With reply to my previous mail I've figured out that Java "awt" is > >looking for some parameters in X-windows. I think the X is broken. > >I'd appreciate if any of you gurus can guide me with fixing of > >X-windows. > > > >Thanks, > > > >Peram > > > > > > > > > > > > > > >From: "Sudhaker P" <perams27(a)hotmail.com> > > >Reply-To: wlug(a)mail.wlug.org > > >To: wlug(a)mail.wlug.org > > >Subject: Re: [Wlug] Newbie to mailing list- Issue with the > > >generation of graphs in redhat 6.2 > > >Date: Tue, 29 Oct 2002 16:07:13 -0600 > > > > > >Hi Karl, > > >Thanks a lot for the response. > > >I'm running it as an applet as in the below mentioned weblogic log > > >java.lang.NoClassDefFoundError > > > at java.lang.Class.forName0(Native Method) > > > at java.lang.Class.forName(Class.java:120) > > > at > > > >java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvi > >ronment.java:58) > > > at java.awt.Window.<init>(Window.java:189) > > > at java.awt.Frame.<init>(Frame.java:315) > > > at java.awt.Frame.<init>(Frame.java:262) > > > at com.rivenet.graphingaction.Graphit.runGraph2D(Unknown >Source) > > > at > > >com.rivenet.reporting.InformalFundingComparisonGraph.makeGraph(Unkn > > >ow > > >n > > >Source) > > > at > > > >jsp_servlet._plan._Model_controller._jspService(_Model_controller.jav > >a:356) > > > at weblogic.servlet.jsp.JspBase.service(JspBase.java:27) > > > at > > > >weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm > >pl.java:123) > > > at > > > >weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon > >textImpl.java:761) > > > at > > > >weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon > >textImpl.java:708) > > > at > > > >weblogic.servlet.internal.ServletContextManager.invokeServlet(Servlet > >ContextManager.java:252) > > > at > > > >weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.jav > >a:346) > > > at > > >weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:246) > > > at > > >weblogic.kernel.ExecuteThread.run(ExecuteThread.java:135) > > > > > >So I was wondering if "awt" since it needs X to generate graphs > > >could be the reason and X might be broken. > > > > > >In your opinion if x is broken what could the rpms that I need to > > >install. I'd appreciate your comments and suggestions. > > > > > >Thanks, > > > > > >Peram > > > > > > > > > > > > > > > > > > > > >>From: Karl Hiramoto <karl(a)zoop.org> > > >>Reply-To: wlug(a)mail.wlug.org > > >>To: wlug(a)mail.wlug.org > > >>Subject: Re: [Wlug] Newbie to mailing list- Issue with the > > >>generation of graphs in redhat 6.2 > > >>Date: Tue, 29 Oct 2002 14:43:56 -0500 (EST) > > >> > > >> > > >>are you running it from the comand line? or an applet? > > >> > > >>Get any errors on your command line? > > >> > > >> > > >>Did you try on the same machine booting 2.4.16 and 2.4.7 to verify > > >>that it is the kernel? > > >> > > >> > > >> > > >>On Tue, 29 Oct 2002, Sudhaker P wrote: > > >> > > >> > Hi , > > >> > I've a program that generates graphs with Java 1.3.1_01. The > > >> > same > > >>program is > > >> > able to generate graphs on a machine with RH 6.2 kernel 2.4.16 > > >> > but it > > >>fails > > >> > to generate graphs on a machine with RH 6.2 kernel 2.4.7-10 on > > >> > which it > > >>used > > >> > to generate before. I've installed KDE and gd thinking that > > >> > something > > >>may > > >> > broken in the OS on the jpegs generation part. But that doesn't > > >> > seem to help. I'd appreciate if any of you gurus can guide me > > >> > in this issue with your comments and suggestions. > > >> > > > >> > Thanks, > > >> > > > >> > Peram > > >> > > > >> > > > >> > > > >> > > > >> > > > >> > > > >> > _______________________________________________________________ > > >> > __ > > >> > Choose an Internet access plan right for you -- try MSN! > > >> > http://resourcecenter.msn.com/access/plans/default.asp > > >> > > > >> > > > >> > _______________________________________________ > > >> > Wlug mailing list > > >> > Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > >> > > > >> > > >>-- > > >> > > >>¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø > > >>Karl Hiramoto <karl(a)hiramoto.org> > > >>Work: 978-425-2090 ext 25 > > >>Cell: 508-517-4819 > > >>Personal web page: http://karl.hiramoto.org/ > > >>Freedom: http://www.technojihad.com/ > > >>Zoop Productions: http://www.zoop.org/ > > >>KTEQ Rapid City: http://www.kteq.org/ > > >>AOL IM ID = KarlH420 Yahoo_IM = karl_hiramoto > > >>¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø > > >> > > >>Confirmed bachelor: > > >> A man who goes through life without a hitch. > > >> > > >> > > >>_______________________________________________ > > >>Wlug mailing list > > >>Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > > > > > > > >_________________________________________________________________ > > >Unlimited Internet access -- and 2 months free! Try MSN. > > >http://resourcecenter.msn.com/access/plans/2monthsfree.asp > > > > > > > > >_______________________________________________ > > >Wlug mailing list > > >Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > > > > >_________________________________________________________________ > >Internet access plans that fit your lifestyle -- join MSN. > >http://resourcecenter.msn.com/access/plans/default.asp > > > > > >_______________________________________________ > >Wlug mailing list > >Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > > > > >_______________________________________________ > >Wlug mailing list > >Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > >_________________________________________________________________ >Protect your PC - get McAfee.com VirusScan Online >http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 > > >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug > > >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug _________________________________________________________________ Broadband? Dial-up? Get reliable MSN Internet Access. http://resourcecenter.msn.com/access/plans/default.asp _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

Thanks for usb help
by Wes Allen Oct. 30, 2002

Oct. 30, 2002

Hi all, Thanks to everyone who tried to help me with my usb problems, it's always a pain when you know WHAT is wrong, but you don't know how to FIX it. Today I went to compUSA got their cheap-o usb2.0 cardbus card for $50, took it home and installed it. IT WORKS. So, when the next kernel fixes this apic promlem I'll have my 2 usb 1.1 ports AND 2 usb2.0 ports as well. I love linux sometimes, well, most times really. Wes -- ------ This message may be signed using GPG, for my public key please send me a message with "Key Request" in the subject line.

1 0

RE: [Wlug] noseguy text
by Keller, Tim Oct. 30, 2002

Oct. 30, 2002

Look here... http://cx.capsi.com/code-matrixfortunes.html Tim. "Why are my eyes sore?" "You've never used them before. Rest, Neo. The answers are coming." -- Neo and Morpheus, "The Matrix" -----Original Message----- From: Clint Moyer [mailto:cdmoyer@charter.net] Sent: Wednesday, October 30, 2002 11:03 AM To: wlug(a)mail.wlug.org Subject: RE: [Wlug] noseguy text Link? -----Original Message----- From: wlug-admin(a)mail.wlug.org [mailto:wlug-admin@mail.wlug.org]On Behalf Of Keller, Tim Sent: Wednesday, October 30, 2002 9:01 AM To: 'wlug(a)mail.wlug.org' Subject: RE: [Wlug] noseguy text As a side note, for you Matrix fans out there, so guy has a whole fortunes file that's matrix quotes (I know cause I have it installed...) It is not the spoon you bend, but your mind... there is no spoon. -----Original Message----- From: Theo Van Dinter [mailto:felicity@kluge.net] Sent: Tuesday, October 29, 2002 22:18 PM To: wlug(a)mail.wlug.org Subject: Re: [Wlug] noseguy text On Fri, Oct 25, 2002 at 09:07:32PM -0400, reavey wrote: > I would like to use noseguy but don't understand how it works?? > I have read it likes to run fortunes, and yet when I use either the text > files or .dat it won't read.Permission denial, chmod 777== can't execute > binary?? Regular text files are not parsed and it deadlocks. > What do you think? Should I write a program in python to parse a text > file(out of my ken). There is probably something stupid I can't see FYI: fortune has 2 files, the text file, and a "database" dat file which specifies how many fortunes there are, what offsets in the text file they're at, etc, etc. If you only edit the text file, fortune will get very confused. doing a "man strfile" will help you out. I also wrote a perl version (for the perl power tools project) which you can find on their website (do a google search for "perl power tools"...) -- Randomly Generated Tagline: We are Pentium of Borg. Division is futile. You will be approximated. (seen in someone's .signature) _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0

RE: [Wlug] noseguy text
by Keller, Tim Oct. 30, 2002

Oct. 30, 2002

As a side note, for you Matrix fans out there, so guy has a whole fortunes file that's matrix quotes (I know cause I have it installed...) It is not the spoon you bend, but your mind... there is no spoon. -----Original Message----- From: Theo Van Dinter [mailto:felicity@kluge.net] Sent: Tuesday, October 29, 2002 22:18 PM To: wlug(a)mail.wlug.org Subject: Re: [Wlug] noseguy text On Fri, Oct 25, 2002 at 09:07:32PM -0400, reavey wrote: > I would like to use noseguy but don't understand how it works?? > I have read it likes to run fortunes, and yet when I use either the text > files or .dat it won't read.Permission denial, chmod 777== can't execute > binary?? Regular text files are not parsed and it deadlocks. > What do you think? Should I write a program in python to parse a text > file(out of my ken). There is probably something stupid I can't see FYI: fortune has 2 files, the text file, and a "database" dat file which specifies how many fortunes there are, what offsets in the text file they're at, etc, etc. If you only edit the text file, fortune will get very confused. doing a "man strfile" will help you out. I also wrote a perl version (for the perl power tools project) which you can find on their website (do a google search for "perl power tools"...) -- Randomly Generated Tagline: We are Pentium of Borg. Division is futile. You will be approximated. (seen in someone's .signature)

2 1

RE: [Wlug] Newbie to mailing list- Issue with the generation of graphs inredhat6.2
by Marc Hughes Oct. 30, 2002

Oct. 30, 2002

What do you mean when you say it seems broken? Are there other symptoms besides the java connection to it? Can you sit down at the machine and use X? If this is a server, you probably don't want that ability (that's where Xvfb comes in). What Xserver are you running? If you "ps aux |grep X" do you see an xserver running? -Marc -----Original Message----- From: Sudhaker P [mailto:perams27@hotmail.com] Sent: Wednesday, October 30, 2002 10:46 AM To: wlug(a)mail.wlug.org Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation of graphs inredhat6.2 Hi Marc, Thanks for the reply. I agree with you Marc, it is a servlet(I'm sorry about that) and its on the server. The display settings seems to be proper, but my X- server seems to be broken. I'd appreciate if you can guide me to any kind of information with the help of which I can fix the issue of broken X-windows. Thanks, Peram >From: "Marc Hughes" <HughesM(a)tomsnyder.com> >Reply-To: wlug(a)mail.wlug.org >To: <wlug(a)mail.wlug.org> >Subject: RE: [Wlug] Newbie to mailing list- Issue with the generation >of >graphs inredhat 6.2 >Date: Wed, 30 Oct 2002 09:16:11 -0500 > >I'm guessing this is a server (the errors you showed before made it >look >more like a servlet than an applet)... So are you running X? If so, when >you start the server do you set your DISPLAY variable correctly? Does the >server process have access to the Xserver? > >If you're not running an Xserver, you need to. Weird, huh? Without a >running X-Server the JRE can't do most graphical operations, even if those >operations never render to the display. It's a long standing issue that a >whole lot of people have complained about. What you can do is run Xvfb ... >It's a non graphical X server. It just gives programs an Xserver to play >with, and never displays the results of those programs. > > > > >-Marc > >-----Original Message----- >From: Sudhaker P [mailto:perams27@hotmail.com] >Sent: Wednesday, October 30, 2002 9:08 AM >To: wlug(a)mail.wlug.org >Subject: Re: [Wlug] Newbie to mailing list- Issue with the generation >of >graphs inredhat 6.2 > > >Hi, >With reply to my previous mail I've figured out that Java "awt" is >looking for some parameters in X-windows. I think the X is broken. I'd >appreciate if any of you gurus can guide me with fixing of X-windows. > >Thanks, > >Peram > > > > > > > >From: "Sudhaker P" <perams27(a)hotmail.com> > >Reply-To: wlug(a)mail.wlug.org > >To: wlug(a)mail.wlug.org > >Subject: Re: [Wlug] Newbie to mailing list- Issue with the generation > >of graphs in redhat 6.2 > >Date: Tue, 29 Oct 2002 16:07:13 -0600 > > > >Hi Karl, > >Thanks a lot for the response. > >I'm running it as an applet as in the below mentioned weblogic log > >java.lang.NoClassDefFoundError > > at java.lang.Class.forName0(Native Method) > > at java.lang.Class.forName(Class.java:120) > > at > >java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58) > > at java.awt.Window.<init>(Window.java:189) > > at java.awt.Frame.<init>(Frame.java:315) > > at java.awt.Frame.<init>(Frame.java:262) > > at com.rivenet.graphingaction.Graphit.runGraph2D(Unknown Source) > > at > >com.rivenet.reporting.InformalFundingComparisonGraph.makeGraph(Unknow > >n > >Source) > > at > >jsp_servlet._plan._Model_controller._jspService(_Model_controller.java:356) > > at weblogic.servlet.jsp.JspBase.service(JspBase.java:27) > > at > >weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:123) > > at > >weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:761) > > at > >weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:708) > > at > >weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContextManager.java:252) > > at > >weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:346) > > at > >weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:246) > > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:135) > > > >So I was wondering if "awt" since it needs X to generate graphs could > >be the reason and X might be broken. > > > >In your opinion if x is broken what could the rpms that I need to > >install. I'd appreciate your comments and suggestions. > > > >Thanks, > > > >Peram > > > > > > > > > > > > > >>From: Karl Hiramoto <karl(a)zoop.org> > >>Reply-To: wlug(a)mail.wlug.org > >>To: wlug(a)mail.wlug.org > >>Subject: Re: [Wlug] Newbie to mailing list- Issue with the > >>generation of graphs in redhat 6.2 > >>Date: Tue, 29 Oct 2002 14:43:56 -0500 (EST) > >> > >> > >>are you running it from the comand line? or an applet? > >> > >>Get any errors on your command line? > >> > >> > >>Did you try on the same machine booting 2.4.16 and 2.4.7 to verify > >>that it is the kernel? > >> > >> > >> > >>On Tue, 29 Oct 2002, Sudhaker P wrote: > >> > >> > Hi , > >> > I've a program that generates graphs with Java 1.3.1_01. The same > >>program is > >> > able to generate graphs on a machine with RH 6.2 kernel 2.4.16 > >> > but it > >>fails > >> > to generate graphs on a machine with RH 6.2 kernel 2.4.7-10 on > >> > which it > >>used > >> > to generate before. I've installed KDE and gd thinking that > >> > something > >>may > >> > broken in the OS on the jpegs generation part. But that doesn't > >> > seem to help. I'd appreciate if any of you gurus can guide me in > >> > this issue with your comments and suggestions. > >> > > >> > Thanks, > >> > > >> > Peram > >> > > >> > > >> > > >> > > >> > > >> > > >> > _________________________________________________________________ > >> > Choose an Internet access plan right for you -- try MSN! > >> > http://resourcecenter.msn.com/access/plans/default.asp > >> > > >> > > >> > _______________________________________________ > >> > Wlug mailing list > >> > Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > >> > > >> > >>-- > >> > >>¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø > >>Karl Hiramoto <karl(a)hiramoto.org> > >>Work: 978-425-2090 ext 25 > >>Cell: 508-517-4819 > >>Personal web page: http://karl.hiramoto.org/ > >>Freedom: http://www.technojihad.com/ > >>Zoop Productions: http://www.zoop.org/ > >>KTEQ Rapid City: http://www.kteq.org/ > >>AOL IM ID = KarlH420 Yahoo_IM = karl_hiramoto > >>¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø > >> > >>Confirmed bachelor: > >> A man who goes through life without a hitch. > >> > >> > >>_______________________________________________ > >>Wlug mailing list > >>Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug > > > > > >_________________________________________________________________ > >Unlimited Internet access -- and 2 months free! Try MSN. > >http://resourcecenter.msn.com/access/plans/2monthsfree.asp > > > > > >_______________________________________________ > >Wlug mailing list > >Wlug(a)mail.wlug.org > >http://mail.wlug.org/mailman/listinfo/wlug > > >_________________________________________________________________ >Internet access plans that fit your lifestyle -- join MSN. >http://resourcecenter.msn.com/access/plans/default.asp > > >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug > > >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug _________________________________________________________________ Protect your PC - get McAfee.com VirusScan Online http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

1 0