- WLUG - wlug.mailman3.com

Re: [Wlug] looking for a PCI graphics card

by Gary Hanley

On Wed, 20 Dec 2006, Bill Mills-Curran wrote: > The graphics (motherboard) on my linux box have stoped... I still > have an ascii screen, but no graphics. (No errors in any logs, so I > suspect a hardware failure.) > I'm looking for a cheap PCI graphics card to see if that fixes the > problem. Even a loaner would help. If you can't find a card, how about booting from a Gentoo or Fedora CD with a GUI install interface to see what that returns? -- Gary

Dec. 20, 2006

Re: [Wlug] looking for a PCI graphics card

by Mike Frysinger

On Wednesday 20 December 2006 14:26, Bill Mills-Curran wrote: > I'm looking for a cheap PCI graphics card to see if that fixes the > problem. Even a loaner would help. i probably have one i can part with ... some S3 virge or something -mike

Dec. 20, 2006

looking for a PCI graphics card

by Bill Mills-Curran

The graphics (motherboard) on my linux box have stoped... I still have an ascii screen, but no graphics. (No errors in any logs, so I suspect a hardware failure.) I'm looking for a cheap PCI graphics card to see if that fixes the problem. Even a loaner would help. Thanks, Bill

Dec. 20, 2006

Senior System Administrator position available

by Dwight A. Ernest

Since this list has been a source of some good contract work for me in the past, I thought I'd return the favor. In my capacity as IP Ops director at RNK Communications (http://www.rnkcomm.com/) I'm looking for a Senior Systems Administrator. Knowledge of FreeBSD, Linux, and Cisco networking, in that order, is required/desired. The full job posting may be viewed at http://www.rnkcomm.com/career.htm#srnetwork. Thanks!

Dec. 19, 2006

Re: [Wlug] Linksys Router

by John Stoffel

Gary> I recently upgraded my router to a WRT45GS and have been having Gary> a bear of a time trying to figure out why, when I boot Linux, I Gary> can't get an IP address from the router but with Windows I can. I've always thought it was a good ideal to seperate the Wireless Access Point (AP) hardware from that of the Router which gives me my firewall and other services. I can place both where they do the most good, and keep the complexity level down, since I just have two devices which each do a well defined job. Gary> It worked with the old router. It works with Windows. There are Gary> no DHCP tweaks in the router. What the hell is wrong? Linksys sucks? Gary> Turns out that there a bug in the router. It doesn't like Gary> Linux-based DHCP requests. This is a known issue and apparently Gary> Linksys has no intention of fixing it. But they did release a Gary> Linux-compatible version of the router instead. Gary> So my options are to either by the Linux-compatible version or Gary> find another brand that supports Linux (or better, doesn't Gary> exclude Linux) and is as good wireless performance-wise as the Gary> Linksys routers. Gary> Any recommendations? Gary> I know there is an open source firmware product that can be Gary> applied, but I'm not ready to try that yet as I work from home a Gary> lot and I'm in the middle of an important project so I need a Gary> stable VPN connection right now. Is your VPN endpoint on the home computer, or is it on the Linksys box? That would be the deciding factor. If it's on the computer, then I'd doubt that going to the Linux compatible router hardware (or just updating the firmware) would have any impact at all on the VPN. Good luck! John

Dec. 18, 2006

x.mount

by Jamie Guinan

Hi all, I meant to post the little script I use to manage FUSE mounts. Here it is, http://www.bluebutton.com/wlug/x.mount I put some dummy entries in the fstab, including one with "foo" to exercise the not-handled case. -Jamie

Dec. 18, 2006

Re: [Wlug] Linksys Router

by Gary Hanley

On Sat, 16 Dec 2006, Adam Keck wrote: > Hello Gary, > I assume you mean WRT54GS ;). Yes, of course! > the dd-wrt open firmware supports some versions of your router. If you > cannot make your Linux dhcp client work, you might try changing the firmware > on your router to support Linux. I may go there someday, but I don't have the capacity for an extended downtime if I have problems. Thanks for the link. -- Gary

Dec. 16, 2006

Re: [Wlug] Linksys Router

by Gary Hanley

On Sat, 16 Dec 2006, Jamie Guinan wrote: > If the router always uses the same subnet on the client side, and > its not a laptop that you use in different envirionments, maybe > you could just pick a static address. I thought of that, although I haven't set up a static IP in a long time. What is the problem for the laptop? I have a year-old wireless-G HP Turion if that matters. -- Gary

Dec. 16, 2006

Re: [Wlug] Linksys Router

by Gary Hanley

On Sat, 16 Dec 2006, jmoyer(a)redhat.com wrote: > Do you know the details of this? You could just patch the dhcp client to > generate the broken requests. I know as much as I posted this morning, as I just found out. Patching the client seems like a good idea, but I'll bet that the problem is due to Linksys being out of spec to accommodate a Windows "enhancement" and the Linux folks are not going to patch that on principal. -- Gary

Dec. 16, 2006

Re: [Wlug] Linksys Router

by Adam Keck

Hello Gary, I assume you mean WRT54GS ;). According to <http://www.dd-wrt.com/wiki/index.php/What_is_DD-WRT%3F#Supported_Devices>, the dd-wrt open firmware supports some versions of your router. If you cannot make your Linux dhcp client work, you might try changing the firmware on your router to support Linux. If you want to change routers and you are interested in the Linux open firmware, then <http://www.dd-wrt.com/wiki/index.php/What_is_DD-WRT%3F#Recommended_Devices> has some good suggestions. -Adam On 12/16/06, jmoyer(a)redhat.com <jmoyer(a)redhat.com> wrote: > > ==> Regarding [Wlug] Linksys Router; Gary Hanley <gary(a)hanley.net> adds: > > gary> I recently upgraded my router to a WRT45GS and have been having a > gary> bear of a time trying to figure out why, when I boot Linux, I can't > gary> get an IP address from the router but with Windows I can. > > gary> It worked with the old router. It works with Windows. There are no > gary> DHCP tweaks in the router. What the hell is wrong? > > gary> Turns out that there a bug in the router. It doesn't like > Linux-based > gary> DHCP requests. This is a known issue and apparently Linksys has no > gary> intention of fixing it. But they did release a Linux-compatible > gary> version of the router instead. > > Do you know the details of this? You could just patch the dhcp client to > generate the broken requests. > > -Jeff > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > -- -Adam

Dec. 16, 2006

Re: [Wlug] Linksys Router

by Jamie Guinan

On Sat, 16 Dec 2006, Gary Hanley wrote: > I recently upgraded my router to a WRT45GS and have been having a bear > of a time trying to figure out why, when I boot Linux, I can't get an > IP address from the router but with Windows I can. > > It worked with the old router. It works with Windows. There are no > DHCP tweaks in the router. What the hell is wrong? > > Turns out that there a bug in the router. It doesn't like Linux-based > DHCP requests. This is a known issue and apparently Linksys has no > intention of fixing it. But they did release a Linux-compatible > version of the router instead. > > So my options are to either by the Linux-compatible version or find > another brand that supports Linux (or better, doesn't exclude Linux) > and is as good wireless performance-wise as the Linksys routers. > > Any recommendations? If the router always uses the same subnet on the client side, and its not a laptop that you use in different envirionments, maybe you could just pick a static address. -Jamie

Dec. 16, 2006

Re: [Wlug] Linksys Router

by jmoyer＠redhat.com

==> Regarding [Wlug] Linksys Router; Gary Hanley <gary(a)hanley.net> adds: gary> I recently upgraded my router to a WRT45GS and have been having a gary> bear of a time trying to figure out why, when I boot Linux, I can't gary> get an IP address from the router but with Windows I can. gary> It worked with the old router. It works with Windows. There are no gary> DHCP tweaks in the router. What the hell is wrong? gary> Turns out that there a bug in the router. It doesn't like Linux-based gary> DHCP requests. This is a known issue and apparently Linksys has no gary> intention of fixing it. But they did release a Linux-compatible gary> version of the router instead. Do you know the details of this? You could just patch the dhcp client to generate the broken requests. -Jeff

Dec. 16, 2006

Linksys Router

by Gary Hanley

I recently upgraded my router to a WRT45GS and have been having a bear of a time trying to figure out why, when I boot Linux, I can't get an IP address from the router but with Windows I can. It worked with the old router. It works with Windows. There are no DHCP tweaks in the router. What the hell is wrong? Turns out that there a bug in the router. It doesn't like Linux-based DHCP requests. This is a known issue and apparently Linksys has no intention of fixing it. But they did release a Linux-compatible version of the router instead. So my options are to either by the Linux-compatible version or find another brand that supports Linux (or better, doesn't exclude Linux) and is as good wireless performance-wise as the Linksys routers. Any recommendations? I know there is an open source firmware product that can be applied, but I'm not ready to try that yet as I work from home a lot and I'm in the middle of an important project so I need a stable VPN connection right now. -- Gary

Dec. 16, 2006

Re: [Wlug] Balloon board

by Jamie Guinan

On Thu, 14 Dec 2006, Andy Stewart wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Andre Lehovich wrote: > > After the meeting a few of us chatted about embeded hardware projects. The > > Balloon Board, based on the Strongarm CPU, has all open specs. Unfortunately > > it looks like a sample board is about $700. http://balloonboard.org/ > > > > An example product built using the board: > > http://www.toby-churchill.com/english/product_info/index.html > > > > --Andre > > Other possibilities for Linux friendly embedded projects: > > I made a firewall with Linux software with the Routerboard: > http://www.routerboard.com > > The USB development board looks interesting, but I haven't actually > tried it: > http://www.delcom-eng.com/ > > These look rather neat, but seem to be a little expensive IMHO, but not > unreachable: > http://www.gumstix.com > > The embedded development kits look interesting as well, but the prices > are exceedingly high. Two examples: > http://www.arcom.com/devkit-linux-apollo.htm > http://www.arcom.com/devkit-linux-pxa270-zeus.htm > > I don't think this vendor offers Linux support, but Linux does work with > these products: > http://www.hobbyengineering.com/SectionBS.html Here's a few more... 1) pickit1/pickit2, very reasonably priced, http://www.microchipdirect.com/ProductDetails.aspx?Catalog=BuyMicrochip&Cat… 2) NSLU2, $99 at many retailers, and I've seen quite a few on eBay. XScale (ARM), USB 2.0, Ethernet, http://en.wikipedia.org/wiki/NSLU2 One of my "someday" projects is to make my own computer-controlled alt-azimuth mount for amateur telescopes. http://en.wikipedia.org/wiki/Altazimuth_mount Or even just a replacement controller for the existing motorized mount. -Jamie

Dec. 15, 2006

Fuse and other users

by Jamie Guinan

The other night I was trying to find the code where FUSE [dis]allowed other users to access files, but I couldn't remember where it was. Found it in fs/fuse/dir.c, /* ... * For this reason only those processes can call into the filesystem, * for which the owner of the mount has ptrace privilege. This * excludes processes started by other users, suid or sgid processes. */ static int fuse_allow_task(struct fuse_conn *fc, struct task_struct *task) { if (fc->flags & FUSE_ALLOW_OTHER) return 1; if (task->euid == fc->user_id && task->suid == fc->user_id && task->uid == fc->user_id && task->egid == fc->group_id && task->sgid == fc->group_id && task->gid == fc->group_id) return 1; return 0; } The FUSE_ALLOW_OTHER flag is set when you invoke a fuse program like sshfs with "-o allow_other". -Jamie

Dec. 15, 2006

Re: [Wlug] Balloon board

by Andy Stewart

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Andre Lehovich wrote: > After the meeting a few of us chatted about embeded hardware projects. The > Balloon Board, based on the Strongarm CPU, has all open specs. Unfortunately > it looks like a sample board is about $700. http://balloonboard.org/ > > An example product built using the board: > http://www.toby-churchill.com/english/product_info/index.html > > --Andre Other possibilities for Linux friendly embedded projects: I made a firewall with Linux software with the Routerboard: http://www.routerboard.com The USB development board looks interesting, but I haven't actually tried it: http://www.delcom-eng.com/ These look rather neat, but seem to be a little expensive IMHO, but not unreachable: http://www.gumstix.com The embedded development kits look interesting as well, but the prices are exceedingly high. Two examples: http://www.arcom.com/devkit-linux-apollo.htm http://www.arcom.com/devkit-linux-pxa270-zeus.htm I don't think this vendor offers Linux support, but Linux does work with these products: http://www.hobbyengineering.com/SectionBS.html Well, that's it for now. Later, Andy - -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA, USA http://www.wlug.org -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFFgehXHl0iXDssISsRAtWBAJ9jm5HEBvR+KspVYz+pZy5J9H4xTACeM3US LBI/kttIlfTvMK2O4Hd0XrM= =lcEv -----END PGP SIGNATURE-----

Dec. 15, 2006

Fuse "slides", other notes

by Jamie Guinan

FUSE presentation, http://www.bluebutton.com/wlug/fuse-presentation/index.html Thanks for putting up with the delays due to my ill-preparedness in forgetting my port-replicator, and big thanks (again) to Frank S. for hooking me up with the Mac laptop. Before we settled on using the Mac, I was going to try this, http://www.karlrunge.com/x11vnc/ but it was slow to install and I didn't want to delay the presentation any further. It lets you export your whole X display over VNC. I just tried it on a system here, and it does work - in fact, if you run the viewer on the same host, you get an "infinite hall of mirrors effect", like pointing a webcam at your monitor, http://www.bluebutton.com/wlug/x11vnc-hom.png A useful tool for remote access, AND for Cthulhu to inflict non-euclidean madness on X11 users! :) Happy holidays all! -Jamie

Dec. 14, 2006

Balloon board

by Andre Lehovich

After the meeting a few of us chatted about embeded hardware projects. The Balloon Board, based on the Strongarm CPU, has all open specs. Unfortunately it looks like a sample board is about $700. http://balloonboard.org/ An example product built using the board: http://www.toby-churchill.com/english/product_info/index.html --Andre ____________________________________________________________________________________ Need a quick answer? Get one in minutes from people who know. Ask your question on www.Answers.yahoo.com

Dec. 14, 2006

[Fwd: Immediate Need: Senior Software Engineer]

by Arllen

I got these job postings from a recruiter I keep in touch with. Both jobs are for software engineers with Linux/Unix experience. Arllen -------- Original Message -------- Subject: Immediate Need: Senior Software Engineer Date: Mon, 11 Dec 2006 13:19:19 -0600 From: General Employment Enterprises, Inc. <wob(a)genp.com> To: <arllen(a)earthlink.net> I have two excellent perm opportunities for a Senior Software Engineer that are a high priority for my client. They make a Software Intrusion Detection Product. I pasted a brief description below for both positions. If interested give me a call anytime from 7 AM till 5 PM. Dewayne Palm General Employment 781-938-7950 dpalm(a)genp.com ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Network Application Software Engineer Our client is an exciting software company with a suite of applications that protect some of the largest networks in the world. With a client base of Fortune 250 customers they make network behavioral analysis software that identifies potential threats by understanding how normal network traffic acts. The Network Application Software Engineer will work in the corporate offices (Boston) and will report to the VP of Engineering. This is a full life cycle product development position where you will have the opportunity to get involved in everything from requirements gathering through coding and support. If you are looking for a start up environment where you can really make an impact and you are looking to work with some of the coolest technology with some of the brightest people than this is the place for you. Pick up the phone and call one of our recruiters today. Requires: 1. C++ 2. Perl 3. Linux/Unix 4. Systems Programming including Network APIs, multithreading, memory mapping...) Plusses: 1. TCP/IP 2. Relational Databases 3. Product Development 4. Additional scripting languages. 5. Excellent Mathematics background ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++++++++++++++++++++++ Description: GUI Software Engineer Our client is an exciting software company with a suite of applications that protect some of the largest networks in the world. With a client base of Fortune 250 customers they make network behavioral analysis software that identifies potential threats by understanding how normal network traffic acts. The GUI Software Engineer will work with the product development team and create user-friendly front-ends for their suite of applications. You will need to be comfortable working with customers and have a solid knowledge of PHP, Perl and JavaScript (other scripting languages would be a plus.) All development is done in a Unix/Linux environment. A solid mathematics background and knowledge of TCP/IP is very helpful. Requires: 1. PHP, Perl and JavaScript 2. Linux/Unix Plusses: 1. Solid knowledge of TCP/IP

Dec. 13, 2006

Re: [Wlug] REMINDER: Meeting Wed 7:00 PM

by Andy Stewart

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Gregory Avedissian wrote: > Hi Andy, > > If you still want to get rid of your 36G scsi drive, I'm still interested in giving it a new home. Thanks. HI Greg, The drive is a Hitachi: HUS151436VL3600 36GB Drive Manufactured 28MAY2005 15,000 RPM 68 pin SCSI Sealed in the antistatic bag - never opened! I received it as a replacement for an IBM DeathStar drive that failed (twice!) under warranty. If you want it, buy me pizza, and its yours! Later, Andy > > > Greg > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > - -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA, USA http://www.wlug.org -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFFfzkPHl0iXDssISsRAr3pAJ46DUW46W2vdOUca9pbxmCEuIfJdgCfSUxV UYwLxRnCIz9Nu/Gbn3nEgZ0= =PnXt -----END PGP SIGNATURE-----

Dec. 12, 2006

Re: [Wlug] kernel / video problem

by Chuck Anderson

On Tue, Dec 12, 2006 at 11:40:53AM -0500, Bill Mills-Curran wrote: > cisco_ipsec: module license 'Proprietary' taints kernel. > Cisco Systems VPN Client Version 4.8.00 (0490) kernel module loaded Does the problem still occur after removing this proprietary kernel module?

Dec. 12, 2006

Re: [Wlug] kernel / video problem

by Jeff Moyer

==> On Tue, 12 Dec 2006 11:40:53 -0500, Bill Mills-Curran <bill(a)mills-curran.net> said: Bill> On Tue, Dec 12, 2006 at 09:12:27AM -0500, Jeff Moyer wrote: Bill> > To: Bill Mills-Curran <bill(a)mills-curran.net> Bill> <snip> Bill> > Bill> > Get the output from the 'dmesg' command and post it here as a follow-up. Bill> > Bill> > -Jeff Bill> Jeff, Bill> Here it is. Well, that didn't actually list the problem, so given that the X server has problems every boot, I'd say the two are unrelated. Someone else mentioned checking the X server logs. I think that is a good place to start. -Jeff p.s. Nuked the BLU CC since I can't post there.

Dec. 12, 2006

P4 Socket 478 Heatsink Retention Bracket

by Mike

Woah, that is a mouthful huh? I am in dire need for one of those brackets. Does anyone have a spare? I have googled it and its about 1.50 part, but 8 bucks to ship. Go figure. I was wondering if anyone had one they could bring tomorrow night. It looks like this: http://tekgems.com/Products/tg-et-11492-cpu-wrp4-16w1-51.htm Cheers, Mike -- They who would give up an essential liberty for temporary security, deserve neither liberty or security --Ben Franklin

Dec. 12, 2006

Re: [Wlug] kernel / video problem

by Bill Mills-Curran

On Tue, Dec 12, 2006 at 09:12:27AM -0500, Jeff Moyer wrote: > To: Bill Mills-Curran <bill(a)mills-curran.net> <snip> > > Get the output from the 'dmesg' command and post it here as a follow-up. > > -Jeff Jeff, Here it is. Bill Linux version 2.6.16-1.2096_FC4 (bhcompile(a)hs20-bc1-4.build.redhat.com) (gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #1 Wed Apr 19 15:27:46 EDT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001f740000 (usable) BIOS-e820: 000000001f740000 - 000000001f750000 (ACPI data) BIOS-e820: 000000001f750000 - 000000001f800000 (ACPI NVS) 0MB HIGHMEM available. 503MB LOWMEM available. found SMP MP-table at 000ff780 Using x86 segment limits to approximate NX protection On node 0 totalpages: 128832 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 124736 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 DMI 2.3 present. ACPI: RSDP (v000 ACPIAM ) @ 0x000f7080 ACPI: RSDT (v001 INTEL D845GVSR 0x20040603 MSFT 0x00000097) @ 0x1f740000 ACPI: FADT (v001 INTEL D845GVSR 0x20040603 MSFT 0x00000097) @ 0x1f740200 ACPI: MADT (v001 INTEL D845GVSR 0x20040603 MSFT 0x00000097) @ 0x1f740300 ACPI: DSDT (v001 INTEL D845GVSR 0x0000010b MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:3 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 20000000 (gap: 1f800000:e0800000) Built 1 zonelists Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c040a000 soft=c040b000 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 2667.461 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 505180k/515328k available (2131k kernel code, 9608k reserved, 754k data, 200k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5342.54 BogoMIPS (lpj=10685097) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000180 0000441d 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled CPU: Intel(R) Celeron(R) CPU 2.66GHz stepping 04 Checking 'hlt' instruction... OK. ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking if image is initramfs... it is Freeing initrd memory: 1646k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 13 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:0b: ioport range 0x400-0x47f could not be reserved pnp: 00:0b: ioport range 0x680-0x6ff has been reserved pnp: 00:0b: ioport range 0x480-0x4bf has been reserved PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: ff800000-ff8fffff PREFETCH window: dea00000-deafffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1165882958.584:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key FD06BDCFDB15BAC1 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU1] (supports 8 throttling states) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 845G Chipset. agpgart: Detected 8060K stolen memory. agpgart: AGP aperture is 128M @ 0xf0000000 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: HDS722580VLAT20, ATA DISK drive hdb: WDC WD800JB-00CRA1, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: HL-DT-ST RW/DVD GCC-4481B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 120103200 sectors (61492 MB) w/1794KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hdb: max request size: 128KiB hdb: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) hdb: cache flushes not supported hdb: hdb1 hdb2 hdc: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 6, 262144 bytes) TCP bind hash table entries: 16384 (order: 6, 327680 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode ACPI wakeup devices: P0P1 UAR1 USB0 USB1 USB2 USB3 AC97 SLPB ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 200k freed Write protecting the kernel read-only data: 346k device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel(a)redhat.com input: AT Translated Set 2 keyboard as /class/input/input0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks FDC 0 is a post-1991 82077 e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 20 (level, low) -> IRQ 17 e100: eth0: e100_probe: addr 0xff8ef000, irq 17, MAC addr 00:0C:F1:F2:DF:C9 ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 55128 usecs intel8x0: clocking to 48000 hw_random: RNG not detected ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa7fc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000e880 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000ec00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-2: new high speed USB device using ehci_hcd and address 3 usb 1-2: configuration #1 chosen from 1 choice eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw(a)saw.sw.com.sg> and others usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice input: HID 413c:3010 as /class/input/input1 input: USB HID v1.00 Mouse [HID 413c:3010] on usb-0000:00:1d.0-1 usb 3-1: new full speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice usb 3-2: new full speed USB device using uhci_hcd and address 3 usb 3-2: configuration #1 chosen from 1 choice SCSI subsystem initialized Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage USB Mass Storage support registered. usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0317 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver Vendor: eM Model: Bay Reader Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 00 Vendor: eM Model: Bay Reader Rev: 1.01 Type: Direct-Access ANSI SCSI revision: 00 Vendor: eM Model: Bay Reader Rev: 1.02 Type: Direct-Access ANSI SCSI revision: 00 Vendor: eM Model: Bay Reader Rev: 1.03 Type: Direct-Access ANSI SCSI revision: 00 usb-storage: device scan complete sd 0:0:0:0: Attached scsi removable disk sda sd 0:0:0:1: Attached scsi removable disk sdb sd 0:0:0:2: Attached scsi removable disk sdc sd 0:0:0:3: Attached scsi removable disk sdd ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: checktime reached, running e2fsck is recommended EXT3 FS on hdb2, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 524280k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:524280k ADDRCONF(NETDEV_UP): eth0: link is not ready e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). lp0: console ready eth0: no IPv6 routers present cisco_ipsec: module license 'Proprietary' taints kernel. Cisco Systems VPN Client Version 4.8.00 (0490) kernel module loaded

Dec. 12, 2006

Re: [Wlug] kernel / video problem

by Bill Mills-Curran

On Tue, Dec 12, 2006 at 10:34:49AM -0500, gboyce wrote: > Date: Tue, 12 Dec 2006 10:34:49 -0500 (EST) > From: gboyce <gboyce(a)badbelly.com> > To: Bill Mills-Curran <bill(a)mills-curran.net> > cc: Worcester Linux Users Group <wlug(a)wlug.org>, BLU Discuss <discuss(a)blu.org> > Subject: Re: kernel / video problem > > On Mon, 11 Dec 2006, Bill Mills-Curran wrote: > > >After rebooting to runlevel 5, I could not get back to graphics mode, > >at least a visible graphics screen. Although I can sometimes get a > >graphics screen showing boot progress, it never gets to the splash > >screen. Everything from the text/console screens looks normal. I > >have not found any errors in the system log. I've tried switching > >monitors, and get the same result. > > By "Graphics Mode", are you referring to X or a frame buffer console? > > If it's X, have you tried looking at the X server logs? The log should be > found in /var/log, and would either be named Xorg.0.log or XFree86.0.log. > It's generally pretty informative if you read through it. > > -- > Greg Boyce > Greg, I had looked at those logs. There's a fair amount in them, but no error (EE) entries. However, one thing comes to mind... I had been playing with screen resolution some weeks before this "event", and this was the first reboot. It's possible that I had bumped the resolution too high. Bill

Dec. 12, 2006