August 2011 - WLUG - wlug.mailman3.com

Re: [Wlug] I got Fedora Core 4 working fine.....

by Randall Mason

Yeay!!!! Sometimes it's just easier to start from a different angle. Glad you got it working and sorry I couldn't figure it out. Good luck! Randall Mason On Wed, Aug 31, 2011 at 4:31 AM, Ken Jones <kjones(a)ziplink.net> wrote: > Thanks for listening. Thanks for the sympathy. > > I had Fedora Core 4 on a machine with a powerless power supply. I added > that 30G hard drive to the 150G on this machine and booted from it. Low > and Behold. CUPS works. SAMBA works. Will wonders never cease... I > even get to choose between GNOME and KDE. > > Ken > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

Aug. 31, 2011

I got Fedora Core 4 working fine.....

by Ken Jones

Thanks for listening. Thanks for the sympathy. I had Fedora Core 4 on a machine with a powerless power supply. I added that 30G hard drive to the 150G on this machine and booted from it. Low and Behold. CUPS works. SAMBA works. Will wonders never cease... I even get to choose between GNOME and KDE. Ken

Aug. 31, 2011

Re: [Wlug] Fedora 6 problems with CUPS

by Aljerin Butler,Jr.

Hello, Perhaps you might want to check out my website here. Good luck, Al Butler >________________________________ >From: "wlug-request(a)mail.wlug.org" <wlug-request(a)mail.wlug.org> >To: wlug(a)mail.wlug.org >Sent: Tuesday, August 30, 2011 12:00 PM >Subject: Wlug Digest, Vol 94, Issue 13 > > > >Send Wlug mailing list submissions to > wlug(a)mail.wlug.org > >To subscribe or unsubscribe via the World Wide Web, visit > http://mail.wlug.org/mailman/listinfo/wlug >or, via email, send a message with subject or body 'help' to > wlug-request(a)mail.wlug.org > >You can reach the person managing the list at > wlug-owner(a)mail.wlug.org > >When replying, please edit your Subject line so it is more specific >than "Re: Contents of Wlug digest..." > >Today's Topics: > > 1. Fedora 6 problems with CUPS (Ken Jones) > 2. Re: Fedora 6 problems with CUPS (Randall Mason) >Evidently FEDORA CORE 6 CUPS predates my BROTHER HL-5340D black and >white laser printer. Even though it does not include this BROTHER model >in its list, CUPS claims it sees the printer and that it turned the >printer on. The printer fails the test page. All my documentation is >out of date. SAMBA does not work. So much for my LINUX Antique Road >Show. I'm going to do a bit of computer hardware upgrading.. > > > >Can you try just installing it with the PPD file: >http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/download_prn.… >When you select the printer, instead of looking for the printer in the list, select that you have a ppd and select the ppd that you can download from the above site for your printer. I think you have a VERY Linux compatible printer. There are also some command line instructions that would make the printer show up in the list of available printers if you click on installation instructions for ppd. > >Randall Mason >randall(a)mason.ch > > > >On Tue, Aug 30, 2011 at 1:29 AM, Ken Jones <kjones(a)employees.org> wrote: > >Evidently FEDORA CORE 6 CUPS predates my BROTHER HL-5340D black and >>white laser printer. Even though it does not include this BROTHER model >>in its list, CUPS claims it sees the printer and that it turned the >>printer on. The printer fails the test page. All my documentation is >>out of date. SAMBA does not work. So much for my LINUX Antique Road >>Show. I'm going to do a bit of computer hardware upgrading.. >> >>_______________________________________________ >>Wlug mailing list >>Wlug(a)mail.wlug.org >>http://mail.wlug.org/mailman/listinfo/wlug >> > >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug > > >

Aug. 30, 2011

Re: [Wlug] Fedora 6 problems with CUPS

by Randall Mason

Can you try just installing it with the PPD file: http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/download_prn.… When you select the printer, instead of looking for the printer in the list, select that you have a ppd and select the ppd that you can download from the above site for your printer. I think you have a VERY Linux compatible printer. There are also some command line instructions that would make the printer show up in the list of available printers if you click on installation instructions for ppd. Randall Mason randall(a)mason.ch On Tue, Aug 30, 2011 at 1:29 AM, Ken Jones <kjones(a)employees.org> wrote: > Evidently FEDORA CORE 6 CUPS predates my BROTHER HL-5340D black and > white laser printer. Even though it does not include this BROTHER model > in its list, CUPS claims it sees the printer and that it turned the > printer on. The printer fails the test page. All my documentation is > out of date. SAMBA does not work. So much for my LINUX Antique Road > Show. I'm going to do a bit of computer hardware upgrading.. > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

Aug. 30, 2011

Fedora 6 problems with CUPS

by Ken Jones

Evidently FEDORA CORE 6 CUPS predates my BROTHER HL-5340D black and white laser printer. Even though it does not include this BROTHER model in its list, CUPS claims it sees the printer and that it turned the printer on. The printer fails the test page. All my documentation is out of date. SAMBA does not work. So much for my LINUX Antique Road Show. I'm going to do a bit of computer hardware upgrading..

Aug. 29, 2011

Re: [Wlug] Either legitimately confused or early onset...

by Randall Mason

You actually don't want samba, that would help you serve printers. You want CUPS. Cups helpsyou serve and use printers. Rememberthe URL I sent you that started with archive? Have you tried that as a repo? Something like: baseurl= http://archive.fedoraproject.org/pub/archive/fedora/linux/core/6/i386/os/ or baseurl= http://archive.fedoraproject.org/pub/archive/fedora/linux/core/$releasever/… Also, give some better background with questions you ask, it will help people help you. -Randall On Aug 29, 2011 5:59 AM, "Ken Jones" <kjones(a)employees.org> wrote: > I've got Fedora Core 6 Evolution working so I can cut and paste. > I tried to use the "retrieve update information" tool. I think > everything is WAY out of date. The update tool said. > "Cannot find a valid baseurl for repo: extras" > > I can't find one either. I checked the fedora-core.repo file: > > $ more fedora-core.repo > [core] > name=Fedora Core $releasever - $basearch > #baseurl= http://download.fedora.redhat.com/pub/fedora/linux/core/$releasever/$ba > search/os/ > > I went there and got. > > The requested URL no longer exists.... > URL /pub/fedora/linux/core/$releasever/$bahttp:// download.fedora.redhat.com/pub/fedora/linux/core/$releasever/$basearch/os/w… not found on this server. > > All I want is SAMBA to work so I can interact with the my WINDOWS > machines - particularly the one with the BROTHER printer attached. > > Ken > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug

Aug. 29, 2011

Re: [Wlug] Either legitimately confused or early onset...

by Ken Jones

I've got Fedora Core 6 Evolution working so I can cut and paste. I tried to use the "retrieve update information" tool. I think everything is WAY out of date. The update tool said. "Cannot find a valid baseurl for repo: extras" I can't find one either. I checked the fedora-core.repo file: $ more fedora-core.repo [core] name=Fedora Core $releasever - $basearch #baseurl=http://download.fedora.redhat.com/pub/fedora/linux/core/$releasever/$ba search/os/ I went there and got. The requested URL no longer exists.... URL /pub/fedora/linux/core/$releasever/$bahttp://download.fedora.redhat.com/pub/fedora/linux/core/$releasever/$basearch/os/ was not found on this server. All I want is SAMBA to work so I can interact with the my WINDOWS machines - particularly the one with the BROTHER printer attached. Ken

Aug. 28, 2011

Re: [Wlug] Wlug Digest, Vol 94, Issue 11

by David Hardy

*If that is an older machine with that little RAM, it will probably be more expensive to jack it up than it would be for a newer machine. I tried to go that route this past year and the cost of jacking up RAM on an older box was just prohibitive.* * * *I just got a Lenovo IdeaPad that came with 1GB of RAM and adding another gig is twelve bucks. 250GB hard drive and it had Windows 7 "Starter Edition" on it which I didn't even allow to boot up and immediately put Fedora 15 on that puppy. Sweet. With LXDE. * On Sun, Aug 28, 2011 at 12:00 PM, <wlug-request(a)mail.wlug.org> wrote: > Send Wlug mailing list submissions to > wlug(a)mail.wlug.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://mail.wlug.org/mailman/listinfo/wlug > or, via email, send a message with subject or body 'help' to > wlug-request(a)mail.wlug.org > > You can reach the person managing the list at > wlug-owner(a)mail.wlug.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Wlug digest..." > > > Today's Topics: > > 1. Either legitimately confused or early onset.... (Ken Jones) > 2. Re: Either legitimately confused or early onset.... > (John Stoffel) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 27 Aug 2011 21:23:31 -0400 > From: "Ken Jones" <kjones(a)ziplink.net> > Subject: [Wlug] Either legitimately confused or early onset.... > To: <wlug(a)mail.wlug.org> > Message-ID: <9CF3FF0779D44C838EF50DCF1E28F2F3@kjonespc> > Content-Type: text/plain; charset="iso-8859-1" > > I have successfully installed Fedora 6 Core. I included 'programming' > services. It said that it would install SAMBA. It did not. System > Services mentions the need for xinetd. 'Locate' finds 'xinetd' but it does > not seem to run. smbd and nmbd are nowhere to be found. Sigh..... > > My machine only has 256M ram memory. The higher numbered FEDORA packages > ask for more ram. I have a 'good' and never before used set of Fedora 6 > .iso CD-ROMs. > > Red Hat and Fedora have gone their separate ways. > > I just found > http://docs.fedoraproject.org/en-US/Fedora_Core/6/html/Installation_Guide/i… > . > > Looks promising. Little did I know how much has changed..... Constructive > suggestions would be appreciated. Maybe I should jump to CORE 13 or > so...... > > Ken Jones (the elder) > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > http://mail.wlug.org/pipermail/wlug/attachments/20110827/d5d5269d/attachmen… > > ------------------------------ > > Message: 2 > Date: Sat, 27 Aug 2011 21:45:58 -0400 > From: "John Stoffel" <john(a)stoffel.org> > Subject: Re: [Wlug] Either legitimately confused or early onset.... > To: Worcester Linux Users Group <wlug(a)mail.wlug.org> > Message-ID: <20057.40406.447557.594576(a)quad.stoffel.home> > Content-Type: text/plain; charset=us-ascii > > > Ken> I have successfully installed Fedora 6 Core. I included > Ken> 'programming' services. It said that it would install SAMBA. > Ken> It did not. System Services mentions the need for xinetd. > Ken> 'Locate' finds 'xinetd' but it does not seem to run. smbd and > Ken> nmbd are nowhere to be found. Sigh..... My machine only has > Ken> 256M ram memory. The higher numbered FEDORA packages ask for > Ken> more ram. I have a 'good' and never before used set of Fedora 6 > Ken> .iso CD-ROMs. > > It's time to just spring for more memory. Seriously, it's just not > that expensive. I just upgraded my kids Athlon (he's only 9) from > 768Mb (3 x 256mb) to 2.25 Gb with a pair of 1gb dimms for $23.00 > shipped. Cheap! > > Heck, I'd *give* you my two old 256Mb DDR 333 Mhz DIMMS if they'll > work for you. I certainly won't be using them again. > > Ken> Red Hat and Fedora have gone their separate ways. > > In what way do you mean? I don't understand what you're trying to say > here. > > > > ------------------------------ > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > > > End of Wlug Digest, Vol 94, Issue 11 > ************************************ >

Aug. 28, 2011

Re: [Wlug] Either legitimately confused or early onset....

by John Stoffel

Ken> I have successfully installed Fedora 6 Core. I included Ken> 'programming' services. It said that it would install SAMBA. Ken> It did not. System Services mentions the need for xinetd. Ken> 'Locate' finds 'xinetd' but it does not seem to run. smbd and Ken> nmbd are nowhere to be found. Sigh..... My machine only has Ken> 256M ram memory. The higher numbered FEDORA packages ask for Ken> more ram. I have a 'good' and never before used set of Fedora 6 Ken> .iso CD-ROMs. It's time to just spring for more memory. Seriously, it's just not that expensive. I just upgraded my kids Athlon (he's only 9) from 768Mb (3 x 256mb) to 2.25 Gb with a pair of 1gb dimms for $23.00 shipped. Cheap! Heck, I'd *give* you my two old 256Mb DDR 333 Mhz DIMMS if they'll work for you. I certainly won't be using them again. Ken> Red Hat and Fedora have gone their separate ways. In what way do you mean? I don't understand what you're trying to say here.

Aug. 28, 2011

Either legitimately confused or early onset....

by Ken Jones

I have successfully installed Fedora 6 Core. I included 'programming' services. It said that it would install SAMBA. It did not. System Services mentions the need for xinetd. 'Locate' finds 'xinetd' but it does not seem to run. smbd and nmbd are nowhere to be found. Sigh..... My machine only has 256M ram memory. The higher numbered FEDORA packages ask for more ram. I have a 'good' and never before used set of Fedora 6 .iso CD-ROMs. Red Hat and Fedora have gone their separate ways. I just found http://docs.fedoraproject.org/en-US/Fedora_Core/6/html/Installation_Guide/i…. Looks promising. Little did I know how much has changed..... Constructive suggestions would be appreciated. Maybe I should jump to CORE 13 or so...... Ken Jones (the elder)

Aug. 28, 2011