February 2010 - WLUG - wlug.mailman3.com

Re: [Wlug] Meeting topics

by Jeff Moyer

Frank Sweetser <fs(a)WPI.EDU> writes: > I've noticed that not too many people have putting in meeting topic requests, > so I thought that if anyone's interested I'd volunteer to throw together some > slides on BtrFS. > > For those of you who haven't heard of it, BtrFS is the next generation linux > filesystem. Though still in heavy development, it was included in the > mainstream kernel last year. It promises to scale to filesystems well beyond > what any of the current offerings can handle (including ext4), as well as > offering far greater flexibility and better data security for data admins. > > If you have anything else that you'd like to hear about, either instead of or > in addition to BtrFS, chime in, and hopefully someone else on the list will be > able to make it happen! If anyone is interested in a talk on SSDs, chime in. I can present my experiences with these devices. I've evaluated the performance of several vendors' products, ranging from the poor to the exemplary. I can talk about the modifications made in the block layer to accommodate for these devices, and the current implementation of the block discard support (which maps to ATA TRIM, which is important for device lognevity and performance) and how that is wired up to file systems such as ext4. Cheers, Jeff

Feb. 28, 2010

Re: [Wlug] How do I change the UUID on an NTFS partition? [Solved]

by Randy Cole

Adam Gomes found the same correkt solution I did. Thanks Adam. I could not find a utility to change the UUID of an NTFS partition. So I edited the boot sector of the partition. ACHTUNG! Editing the boot sector can cause loss of data and severe tire damage! You have been warned. % blkid | grep ntfs The partition I want to change is /dev/sdb14. % dd if=/dev/sdb14 of=superblockSDB14 bs=512 count=1 you can use a random-number generator to synthesize new UUID. Or you can just change a couple of digits. edit Volume Serial Number aka "UUID" bytes 0x48 thru 0x4F (due to endian, the hex digits are both backwards and reversed!): % hexeditor superblockSDB14 % sudo dd of=/dev/sdb14 if=superblockSDB14 bs=512 count=1 Adam Gomes wrote: > Sorry for spamming the list. > > Randy, In case you are curious about what's in that NTFS superblock, > here's a great reference: > http://technet.microsoft.com/en-us/library/cc781134(WS.10).aspx > <http://technet.microsoft.com/en-us/library/cc781134%28WS.10%29.aspx> > > If you wanted instructions for editting that superblock, this is > probably the simplest way: > > dd if=/dev/sda# of=block bs=512 count=1 > ghexedit2 block (or what hex editor you like) > dd if=block of=/dev/sda# bs=512 count=1 > > You may also want to keep a copy of the original block, just in case > your modified block is not happy. > > The serial number is stored in the 8 bytes starting at offset 0x48. > > Here's an example from one of my own NTFS Super Blocks: > > adam@adam-laptop:~$ hd block > 00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS > .....| > 00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 3f 00 00 00 > |........?...?...| > 00000020 00 00 00 00 80 00 80 00 24 97 ff 04 00 00 00 00 > |........$.......| > 00000030 00 00 0c 00 00 00 00 00 72 f9 4f 00 00 00 00 00 > |........r.O.....| > 00000040 f6 00 00 00 01 00 00 00 *69 28 05 50 64 05 50 3a* > |........*i(.Pd.P:*| > 00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb b8 c0 07 > |.....3.....|....| > > If you had any more questions, I'll gladly take them off list, too. > > On Wed, Feb 24, 2010 at 2:48 PM, Adam Gomes <adam(a)unixgeek.net > <mailto:adam@unixgeek.net>> wrote: > > OR .... > > If you absolutely need to change the UUID, then you can always > alter the superblock of the partition. This is a little scarry, > though. The superblock is the first 512 bytes of the partition. > You can edit it in the hex editor and the NTFS volume serial > number should be in 0x48 to 0x4f. It's only 8 bytes long. Just > alter a byte or two in that region, and you should have a new UUID. > > This is NOT for the faint of heart, though. > > > On Wed, Feb 24, 2010 at 2:30 PM, Adam Gomes <adam(a)unixgeek.net > <mailto:adam@unixgeek.net>> wrote: > > ntfslabel /dev/sdaX LABELNAME > > and in /etc/rfstab change the /dev/sdaX or UUID= part of the > line to LABEL=LALBELNAME > > That should do the trick. You may need to install a new > package to get ntfslabel, in Ubuntu, that package is ntfsprogs. > > > On Wed, Feb 24, 2010 at 2:14 PM, Randy Cole > <randyokc(a)gmail.com <mailto:randyokc@gmail.com>> wrote: > > I've done this before but I can't remember how. Gparted > (actually > ntfsclone) duplicates the UUID, so I cannot mount them both! > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org <mailto:Wlug@mail.wlug.org> > http://mail.wlug.org/mailman/listinfo/wlug > > > > > ------------------------------------------------------------------------ > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

Feb. 24, 2010

Re: [Wlug] How do I change the UUID on an NTFS partition?

by Adam Gomes

Sorry for spamming the list. Randy, In case you are curious about what's in that NTFS superblock, here's a great reference: http://technet.microsoft.com/en-us/library/cc781134(WS.10).aspx If you wanted instructions for editting that superblock, this is probably the simplest way: dd if=/dev/sda# of=block bs=512 count=1 ghexedit2 block (or what hex editor you like) dd if=block of=/dev/sda# bs=512 count=1 You may also want to keep a copy of the original block, just in case your modified block is not happy. The serial number is stored in the 8 bytes starting at offset 0x48. Here's an example from one of my own NTFS Super Blocks: adam@adam-laptop:~$ hd block 00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....| 00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 3f 00 00 00 |........?...?...| 00000020 00 00 00 00 80 00 80 00 24 97 ff 04 00 00 00 00 |........$.......| 00000030 00 00 0c 00 00 00 00 00 72 f9 4f 00 00 00 00 00 |........r.O.....| 00000040 f6 00 00 00 01 00 00 00 *69 28 05 50 64 05 50 3a* |........* i(.Pd.P:*| 00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb b8 c0 07 |.....3.....|....| If you had any more questions, I'll gladly take them off list, too. On Wed, Feb 24, 2010 at 2:48 PM, Adam Gomes <adam(a)unixgeek.net> wrote: > OR .... > > If you absolutely need to change the UUID, then you can always alter the > superblock of the partition. This is a little scarry, though. The superblock > is the first 512 bytes of the partition. You can edit it in the hex editor > and the NTFS volume serial number should be in 0x48 to 0x4f. It's only 8 > bytes long. Just alter a byte or two in that region, and you should have a > new UUID. > > This is NOT for the faint of heart, though. > > > On Wed, Feb 24, 2010 at 2:30 PM, Adam Gomes <adam(a)unixgeek.net> wrote: > >> ntfslabel /dev/sdaX LABELNAME >> >> and in /etc/rfstab change the /dev/sdaX or UUID= part of the line to >> LABEL=LALBELNAME >> >> That should do the trick. You may need to install a new package to get >> ntfslabel, in Ubuntu, that package is ntfsprogs. >> >> >> On Wed, Feb 24, 2010 at 2:14 PM, Randy Cole <randyokc(a)gmail.com> wrote: >> >>> I've done this before but I can't remember how. Gparted (actually >>> ntfsclone) duplicates the UUID, so I cannot mount them both! >>> _______________________________________________ >>> Wlug mailing list >>> Wlug(a)mail.wlug.org >>> http://mail.wlug.org/mailman/listinfo/wlug >>> >> >> >

Feb. 24, 2010

Re: [Wlug] How do I change the UUID on an NTFS partition?

by Adam Gomes

OR .... If you absolutely need to change the UUID, then you can always alter the superblock of the partition. This is a little scarry, though. The superblock is the first 512 bytes of the partition. You can edit it in the hex editor and the NTFS volume serial number should be in 0x48 to 0x4f. It's only 8 bytes long. Just alter a byte or two in that region, and you should have a new UUID. This is NOT for the faint of heart, though. On Wed, Feb 24, 2010 at 2:30 PM, Adam Gomes <adam(a)unixgeek.net> wrote: > ntfslabel /dev/sdaX LABELNAME > > and in /etc/rfstab change the /dev/sdaX or UUID= part of the line to > LABEL=LALBELNAME > > That should do the trick. You may need to install a new package to get > ntfslabel, in Ubuntu, that package is ntfsprogs. > > > On Wed, Feb 24, 2010 at 2:14 PM, Randy Cole <randyokc(a)gmail.com> wrote: > >> I've done this before but I can't remember how. Gparted (actually >> ntfsclone) duplicates the UUID, so I cannot mount them both! >> _______________________________________________ >> Wlug mailing list >> Wlug(a)mail.wlug.org >> http://mail.wlug.org/mailman/listinfo/wlug >> > >

Feb. 24, 2010

Re: [Wlug] How do I change the UUID on an NTFS partition?

by Adam Gomes

ntfslabel /dev/sdaX LABELNAME and in /etc/rfstab change the /dev/sdaX or UUID= part of the line to LABEL=LALBELNAME That should do the trick. You may need to install a new package to get ntfslabel, in Ubuntu, that package is ntfsprogs. On Wed, Feb 24, 2010 at 2:14 PM, Randy Cole <randyokc(a)gmail.com> wrote: > I've done this before but I can't remember how. Gparted (actually > ntfsclone) duplicates the UUID, so I cannot mount them both! > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

Feb. 24, 2010

How do I change the UUID on an NTFS partition?

by Randy Cole

I've done this before but I can't remember how. Gparted (actually ntfsclone) duplicates the UUID, so I cannot mount them both!

Feb. 24, 2010

Re: [Wlug] Job openings: web developer, application support specialist

by Klene, Matthew

Brian, I'm new to Wlug; the last meeting was my first. It was nice to interact with everyone that was there and look forward to attending future gatherings, from some of the emails that have been circulating it sounds like BtrFS will be the next topic. I am not a hands on user of Linux, I joined to try and grow my understanding of the technology itself. I am an account manager for TEKsystems, we are the leading IT Staffing and Services firm, (Ranked #1 in industry by IT Services Business Report for eight consecutive years). The reasons for joining Wlug were centered around getting a better understanding of Linux, so I can have better conversations with the managers I work with regarding the technologies they use, not solicit business. If you or your company would like more information about more about TEKsystems and what I do please feel free to reach out to me. >From reading the rough description these positions are definitely something I could help you find, if you haven't already. You'll find my contact information below. If not I look forward to chatting with you at the next meeting Respectfully, Matthew Klene Account Manager 111 Speen St, Suite 520, Framingham, MA 01701 888.598.5881 T 508.766.3118 F 508.766.3163 M 774.279.7095 http://www.teksystems.com -----Original Message----- From: wlug-bounces(a)mail.wlug.org [mailto:wlug-bounces@mail.wlug.org] On Behalf Of Brian Conway Sent: Sunday, February 21, 2010 6:50 PM To: wlug(a)mail.wlug.org Subject: [Wlug] Job openings: web developer, application support specialist Hi folks. My company is looking for a couple people for openings. Background: We're a two year-old startup located in Worcester that produces a high-performance, bidirectional messaging infrastructure that encompasses voice, SMS, email, IM, social networking, and more. Current customers include a number of restaurant chains, sports venues, and state agencies. The positions are full-time with health benefits. Pay has some flexibility, but geared towards entry level and recent grads. Web developer: PHP, Ajax, SQL (Oracle), XML, Linux (of course). Additional responsibility/salary is available for partial system operations support. Customer support/application specialist: Customer-facing, non-programmer, will become an expert in our applications. Responsible for initial setup and configuration of new customers in our applications and troubleshooting. Additional roles as they appear. Let me know if anyone's interested and I'll pass it along, thanks. Brian Conway _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug ____________________________________________________________________________________________________ This electronic mail (including any attachments) may contain information that is privileged, confidential, and/or otherwise protected from disclosure to anyone other than its intended recipient(s). Any dissemination or use of this electronic email or its contents (including any attachments) by persons other than the intended recipient(s) is strictly prohibited. If you have received this message in error, please notify us immediately by reply email so that we may correct our internal records. Please then delete the original message (including any attachments) in its entirety. Thank you.

Feb. 23, 2010

Re: [Wlug] Meeting topics

by Keith Wright

> From: Frank Sweetser <fs(a)WPI.EDU> > > (I guess this mean I have to actually finish up the slides now...) To quote my boss: no need to hurry, just start it now... and finish before you go home. -- Keith

Feb. 22, 2010

Re: [Wlug] Meeting topics

by Frank Sweetser

On 2/22/2010 6:38 AM, Andy Stewart wrote: > HI Frank, > > I think that would be a great topic for our next meeting. Shall I > update the website accordingly? Sure, go for it! (I guess this mean I have to actually finish up the slides now...) -- Frank Sweetser fs at wpi.edu | For every problem, there is a solution that WPI Senior Network Engineer | is simple, elegant, and wrong. - HL Mencken GPG fingerprint = 6174 1257 129E 0D21 D8D4 E8A3 8E39 29E3 E2E8 8CEC

Feb. 22, 2010

Re: [Wlug] Meeting topics

by Andy Stewart

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Frank Sweetser wrote: > I've noticed that not too many people have putting in meeting topic requests, > so I thought that if anyone's interested I'd volunteer to throw together some > slides on BtrFS. > > For those of you who haven't heard of it, BtrFS is the next generation linux > filesystem. Though still in heavy development, it was included in the > mainstream kernel last year. It promises to scale to filesystems well beyond > what any of the current offerings can handle (including ext4), as well as > offering far greater flexibility and better data security for data admins. > > If you have anything else that you'd like to hear about, either instead of or > in addition to BtrFS, chime in, and hopefully someone else on the list will be > able to make it happen! > HI Frank, I think that would be a great topic for our next meeting. Shall I update the website accordingly? Thanks, Andy - -- Andy Stewart (KB1OIQ) Founder: Worcester Linux Users' Group Founder: Chelmsford Linux Meetup Group President: PART of Westford, MA (WB1GOF) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFLgmywOjiraCaOTOoRAr1XAJ4nxnSQ6wNgYIrpCSt65wTVtP6ycwCgh9cQ VCClnkd/TnnJcBrSmkX6weM= =+Tco -----END PGP SIGNATURE-----

Feb. 22, 2010