- WLUG - wlug.mailman3.com

Re: [Wlug] DVD RAM

by Scott Venier

cdrecord can write to a dvd. I assume xcdroast can too. But you'll need something to make the funky DVD filesystem. They don't use ISO9660. Scott On Mon, 4 Jun 2001, Andy Stewart wrote: > > HI gang, > > I saw a note on SuSE's website advertising their upcoming release of > version 7.2 In that press release, they boasted about supporting the new > Panasonic DVD RAM drive (LF-D291), which supports writing 9.6 GB on a two > sided medium. > > I know that reading a DVD is supported on recent (2.4.x) kernels, and also > on some later 2.2.x kernels, and that patches exist for earlier 2.2.x > kernels. (Data mode, like a giant CD...not DVD video). > > What I would like to know is: what is required of Linux to support > writing a DVD RAM device. Do I need a program analogous to xcdroast? I > have searched quite a bit and cannot find this tidbit of information. > > I am considering this for a backup solution first, a data DVD reader > second (SuSE distributes their stuff on DVD), and DVD video lastly > (www.linuxvideo.org) > > Later, > > Andy > -- > Andy Stewart > Founder > Worcester Linux Users' Group > Worcester, MA, USA > http://www.wlug.org > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

June 4, 2001

DVD RAM

by Andy Stewart

HI gang, I saw a note on SuSE's website advertising their upcoming release of version 7.2 In that press release, they boasted about supporting the new Panasonic DVD RAM drive (LF-D291), which supports writing 9.6 GB on a two sided medium. I know that reading a DVD is supported on recent (2.4.x) kernels, and also on some later 2.2.x kernels, and that patches exist for earlier 2.2.x kernels. (Data mode, like a giant CD...not DVD video). What I would like to know is: what is required of Linux to support writing a DVD RAM device. Do I need a program analogous to xcdroast? I have searched quite a bit and cannot find this tidbit of information. I am considering this for a backup solution first, a data DVD reader second (SuSE distributes their stuff on DVD), and DVD video lastly (www.linuxvideo.org) Later, Andy -- Andy Stewart Founder Worcester Linux Users' Group Worcester, MA, USA http://www.wlug.org

June 4, 2001

Re: [Wlug] Handspring & Linux

by Frank Sweetser

On Mon, Jun 04, 2001 at 04:08:15PM -0400, William Smith wrote: > All, > > I recently "upgraded" from a Palm IIIx to a Handspring Visor Deluxe > (screen on the IIIx went South. 8( ). > > As you might be aware, the Handspring Visor comes with a USB cradle. > > Has anyone had any success in getting a Linux box to sync-up with a Visor > through the USB port? I've had some limited success, but only with the pilot-link command line utils. USB is kind of wierd, since the "serial port" only exists while the Visor is trying to connect. I'd reccomend is to spend the $20 or so, and just get a serial connection. -- Frank Sweetser fs at wpi.edu, fs at suave.net | $ x 15 Full-time WPI Network Tech, Part time Linux/Perl guy | I'd put my money where my mouth is, but my mouth keeps moving. -- Larry Wall in <199704051723.JAA28035(a)wall.org>

June 4, 2001

Re: [Wlug] Handspring & Linux

by Doctor Orbitz

I have done it, works great. I spent teh 20 bucks on teh serial cradle and found out i didnt' even need it. http://www.linux.org/docs/ldp/howto/mini/Handspring-Visor-2.html was very helpful. I use coldsync (its on freshmeat) very direct program and I like it. Orbitz William Smith wrote: > All, > > I recently "upgraded" from a Palm IIIx to a Handspring Visor Deluxe > (screen on the IIIx went South. 8( ). > > As you might be aware, the Handspring Visor comes with a USB cradle. > > Has anyone had any success in getting a Linux box to sync-up with a Visor > through the USB port? > > Any ideas are welcome. > > Best regards, > > Bill Smith > Fall River, MA > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug

June 4, 2001

Handspring & Linux

by William Smith

All, I recently "upgraded" from a Palm IIIx to a Handspring Visor Deluxe (screen on the IIIx went South. 8( ). As you might be aware, the Handspring Visor comes with a USB cradle. Has anyone had any success in getting a Linux box to sync-up with a Visor through the USB port? Any ideas are welcome. Best regards, Bill Smith Fall River, MA

June 4, 2001

RE: [Wlug] dual PII/PIII motherboard of questionable origin up fo r grabs

by Keller, Tim

That sounds like a raffle item to me! Tim. -----Original Message----- From: Brian J. Conway [mailto:dogbert@clue4all.net] Sent: Monday, June 04, 2001 3:29 PM To: wlug(a)wlug.org Subject: [Wlug] dual PII/PIII motherboard of questionable origin up for grabs The WPI Linux Association received a donation of a SuperMicro SUPER P6DBE dual PII/PIII 440BX motherboard (http://www.supermicro.com/PRODUCT/MotherBoards/440BX/p6dbe.htm) The original owner upgraded because it was flaky and thought the parallel port was bad, but upon buying a new motherboard found that it was his fubared sound card causing flakiness, so I'm under the assumption that this motherboard should be good or at least workable, but of course there are NO GUARANTEES. As we currently have no use for it and I'd hate to see it go to waste, get back to me if you'd like it, but please only do so if you'll put it to good use, I'd hate to see something like this go to waste. I'll bring it to the next WLUG meeting to hand off. Brian J. Conway dogbert(a)clue4all.net Geek for hire: http://clue4all.net/resume Power Mac G4 Cube. Some of us are getting laid tonight. (http://www.pvponline.com/archive.php3?archive=20010509) P.S. I'm also told the screen at POST looks a little garbled, but that's due to the latest BIOS update and performance should be unaffected. _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

June 4, 2001

dual PII/PIII motherboard of questionable origin up for grabs

by Brian J. Conway

The WPI Linux Association received a donation of a SuperMicro SUPER P6DBE dual PII/PIII 440BX motherboard (http://www.supermicro.com/PRODUCT/MotherBoards/440BX/p6dbe.htm) The original owner upgraded because it was flaky and thought the parallel port was bad, but upon buying a new motherboard found that it was his fubared sound card causing flakiness, so I'm under the assumption that this motherboard should be good or at least workable, but of course there are NO GUARANTEES. As we currently have no use for it and I'd hate to see it go to waste, get back to me if you'd like it, but please only do so if you'll put it to good use, I'd hate to see something like this go to waste. I'll bring it to the next WLUG meeting to hand off. Brian J. Conway dogbert(a)clue4all.net Geek for hire: http://clue4all.net/resume Power Mac G4 Cube. Some of us are getting laid tonight. (http://www.pvponline.com/archive.php3?archive=20010509) P.S. I'm also told the screen at POST looks a little garbled, but that's due to the latest BIOS update and performance should be unaffected.

June 4, 2001

Re: [Wlug] Fwd: WLUG - Borland Kylix

by Josh Huber

"Brian J. Conway" <dogbert(a)clue4all.net> writes: > On a side note, I wanted to point out that since just about > _everything_ is built against glibc, upgrading glibc would require > upgrading pretty much one's entire installation, at which point > you're probably a lot better off just backing up and doing a fresh > install. On another side note, I also wanted to point out that > Mandrake 8.0 is built on glibc 2.2 and is pretty sweet. =) or, if you're using Debian, just do a dist-upgrade to testing or unstable. both of them are up to glibc 2.2. ttyl, -- Josh Huber

June 3, 2001

Re: [Wlug] Fwd: WLUG - Borland Kylix

by Brian J. Conway

> working. It requires glibc 2.2 which my mandrake box didn't have, and let me > point out an important fact that I didn't realize... a glibc 2.1 -> 2.2 > upgrade is not a trivial thing. Oh... and it doesn't work with the newest On a side note, I wanted to point out that since just about _everything_ is built against glibc, upgrading glibc would require upgrading pretty much one's entire installation, at which point you're probably a lot better off just backing up and doing a fresh install. On another side note, I also wanted to point out that Mandrake 8.0 is built on glibc 2.2 and is pretty sweet. =) -b

June 3, 2001

Re: [Wlug] Fwd: WLUG - Borland Kylix

by Marc Hughes

My copy came in Wednesday :) Here's my first impressions: It's a typicall x.0 release, a bit too buggy. The install crashed on me, and I had to visit the borland website to get it working. It requires glibc 2.2 which my mandrake box didn't have, and let me point out an important fact that I didn't realize... a glibc 2.1 -> 2.2 upgrade is not a trivial thing. Oh... and it doesn't work with the newest version of the mySql client libs. I've known borland for a while, and I bet the first update for it is already being written. Now that's all the bad I have for it so far, on to the good. It is delphi! I sit and work on it, and except for the window decorations and weird mouse focus rules, it behaves exactly like delphi! On my 700mhz laptop it runs nice and zippy. The applications it produces are truly native linux apps. Their run time libraries came dual-licensed in both comercial and GPL format, so you can distribute them with your Free or non-Free apps. So here's my overall review: If they fix the bugs mentioned above, we will soon have a first class development environment. I would hope this would lead to more apps, and a more wide spread acceptance of linux. I'm guessing it's a Good Thing. Now... where are all those kylix jobs I've been waiting for :) -Marc On Friday 01 June 2001 18:28, you wrote: > ---------- Forwarded Message ---------- > Subject: WLUG - Borland Kylix > Date: Fri, 1 Jun 2001 14:53:15 -0400 > From: "Al Reinhart" <reinhart(a)discom.com> > To: <astewart(a)world.std.com> > > > Andy, > > Thought some of the members in the user group might be interested in the > following: > > Borland announces a 90-day limited time offer to purchase > the Desktop edition of Borland® Kylix(TM), its award-winning > Linux® application development and deployment product for > $199. Timed with the launch of "Kylix-Compatible" Borland® > Delphi(TM) 6, the promotion is designed to address the demand > for Windows/Linux cross-platform application development and deployment... > (http://www.borland.com/about/press/2001/kylix_promo.html) > > Al > ------------------------------------------ > Al Reinhart Phone: (508) 869-6417 > DisCom Systems Fax: (508) 869-3420 > www.DisCom.com > > -------------------------------------------------------

June 2, 2001