- WLUG - wlug.mailman3.com

Re: [Wlug] CUPS + Samba + Win2000

by Brad Noyes

Hi, is there anything in /var/log/cups/? -brad

July 2, 2002

Re: [Wlug] CUPS + Samba + Win2000

by jeff

Michael Frysinger wrote: > problem: print jobs sent to cups via samba from windows > sit in print queue and never get processed > > printer: HP OfficeJet 600 > set up cups + hpijs drivers. going through localhost:631 i set > up the printer. had cups print out a test page ... looked good. > set up samba ... samba file sharing/access/etc... works. added > printer support to samba (see bottom for smb.conf). was able > to add printer on windows2000 machine. viewed the properties > of the printer, all of that stuff. went to print test page, no error > came back. goto localhost:631 and i see: > ID Name User Size State Control > HP_OfficeJet_Series_600-2 smbprn.000004.mITl7Y root 313k > processing since > Sun Jun 30 02:53:03 2002 Hold Job Cancel Job > basically it sits there forever (by forever i mean 24+hrs) and never gets > printed. > any ideas ? > k thx > -mike > > cups' printer.conf > <DefaultPrinter HP_OfficeJet_Series_600> > Info HP OfficeJet 600 > Location Home > DeviceURI parallel:/dev/lp0 > State Idle > Accepting Yes > JobSheets none none > QuotaPeriod 0 > PageLimit 0 > KLimit 0 > </Printer> > > smb.conf > [global] > preferred master = True > domain master = False > wins support = yes > > hosts allow = 192.168.0. > interfaces = 192.168.0.1/24 > security = SHARE > encrypt passwords = Yes > guest account = root > > netbios name = Home > workgroup = WH0RD.ORG > server string = home.wh0rd.org Samba %v > > # load printers = yes > printcap name = lpstat > printing = cups > > [printers] > comment = All Printers > path = /var/spool/samba > browseable = no > guest ok = yes > writable = no > printable = yes > create mode = 0700 > print command = lpr -P %p -o raw %s -r > lpq command = lpstat -o %p > lprm command = cancel %p-%j > > [print$] > path = /var/lib/samba/printers > guest ok = yes > browseable = yes > read only = yes > write list = root > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > uh...WINDOWS SUCKS? ROFL... sorry man...i know that was uncalled for but...i just had to...please forgive me :) i HATE printers! heh... my two cents...now i'll shut up... -jeff (co-crazy guy who made MWBLUG) p.s. WHERE's THE DERN BBQ AT THIS YEAR! i miss hangin' out with all ya nerdz!!! :) p.p.s. dang it's hot here in woo-stah

July 1, 2002

CUPS + Samba + Win2000

by Michael Frysinger

problem: print jobs sent to cups via samba from windows sit in print queue and never get processed printer: HP OfficeJet 600 set up cups + hpijs drivers. going through localhost:631 i set up the printer. had cups print out a test page ... looked good. set up samba ... samba file sharing/access/etc... works. added printer support to samba (see bottom for smb.conf). was able to add printer on windows2000 machine. viewed the properties of the printer, all of that stuff. went to print test page, no error came back. goto localhost:631 and i see: ID Name User Size State Control HP_OfficeJet_Series_600-2 smbprn.000004.mITl7Y root 313k processing since Sun Jun 30 02:53:03 2002 Hold Job Cancel Job basically it sits there forever (by forever i mean 24+hrs) and never gets printed. any ideas ? k thx -mike cups' printer.conf <DefaultPrinter HP_OfficeJet_Series_600> Info HP OfficeJet 600 Location Home DeviceURI parallel:/dev/lp0 State Idle Accepting Yes JobSheets none none QuotaPeriod 0 PageLimit 0 KLimit 0 </Printer> smb.conf [global] preferred master = True domain master = False wins support = yes hosts allow = 192.168.0. interfaces = 192.168.0.1/24 security = SHARE encrypt passwords = Yes guest account = root netbios name = Home workgroup = WH0RD.ORG server string = home.wh0rd.org Samba %v # load printers = yes printcap name = lpstat printing = cups [printers] comment = All Printers path = /var/spool/samba browseable = no guest ok = yes writable = no printable = yes create mode = 0700 print command = lpr -P %p -o raw %s -r lpq command = lpstat -o %p lprm command = cancel %p-%j [print$] path = /var/lib/samba/printers guest ok = yes browseable = yes read only = yes write list = root

July 1, 2002

Help with Audio on Linux

by Prakash Purushotham

Gurus I have a P-IV with AC97 on i810 (AvanceLogic ALC200/200P). I am unable to get FullDuplex audio working. I have installed the RC2 release of ALSA drivers but still, mic and speakers don't work together. I am pretty sure I am missing something in the configs. I have not been able to get any leads from Google. (Rh7.2, kernel 2.4.9-31, alsa-drivers 0.9rc2) TIA Best regards Prakash Purushotham

July 1, 2002

Re: [Wlug] Poster policy changed

by David Goss

works for me! Dave Goss ----- Original Message ----- From: "Frank Sweetser" <fs(a)WPI.EDU> To: <wlug(a)wlug.org> Sent: Monday, July 01, 2002 12:42 AM Subject: [Wlug] Poster policy changed > Since it seemed pretty much unanimous (at least among those who spoke up) > the WLUG list should now only accepts submissions from subscribed members. > If anyone has any problems, feel free to contact me. > > -- > Frank Sweetser fs at wpi.edu, fs at suave.net | $ x 18 > Full-time WPI Network Engineer, Part time Linux/Perl guy | > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug

July 1, 2002

Poster policy changed

by Frank Sweetser

Since it seemed pretty much unanimous (at least among those who spoke up) the WLUG list should now only accepts submissions from subscribed members. If anyone has any problems, feel free to contact me. -- Frank Sweetser fs at wpi.edu, fs at suave.net | $ x 18 Full-time WPI Network Engineer, Part time Linux/Perl guy |

July 1, 2002

Re: [Wlug] Antispam software (was spam with header)

by Aaron Haviland

Karl Hiramoto said: > Do you have a project created for this software? Distribute it? I > have a spam problem @ work. Looking into solutions. I looked at maps > rbl http://mail-abuse.org/rbl/ not sure on using it in a production > environment though (where the most spam goes to) > > My main worry is someone sending e-mail to sales(a)company.com and it > gettting rejected, and comany.com loses a sale. Is this an issue? If you feel it might be an issue, I'm sure it'd be a simple matter to "hold" the messages instead of rejecting them. Mailman supports a similar feature, iirc. (that is being able to hold certain messages for moderator approval) -- Aaron Haviland orion [at] tribble [dot] dyndns [dot] org orion [at] parsed [dot] net Release the Mongoose!

July 1, 2002

Re: [Wlug] hardware problem?

by Theo Van Dinter

On Sun, Jun 30, 2002 at 11:12:28PM -0400, avedis(a)ma.ultranet.com wrote: > No, nothing comes onto the screen until, in windows, my desktop appears, > and in linux, didn't see lilo, I had to log in in the dark and call up > an x session, and that comes up fine. I didn't try booting a clean dos > disk, but I suspect I'll see nothing. Have you tried power cycling? I used to have a video card which would have issues rebooting after being in a graphic mode, it would never switch back to a text mode. I always had to power cycle (hitting reset didn't do it) to clear the problem. -- Randomly Generated Tagline: "Just wanted to let you know that pubexchange is down, something caught on fire inside the box." - Random problem ticket at work

July 1, 2002

Re: [Wlug] hardware problem?

by Michael Frysinger

ive seen this once or twice on my on hardware. to fix it i either unplugged/plugged the monitor (both power cord and to the video card), or swapped the video cards temporarily. every once in a while stupid shit like that works :) -mike ----- Original Message ----- From: "Karl Hiramoto" <karl(a)zoop.org> To: <wlug(a)mail.wlug.org> Sent: Sunday, June 30, 2002 22:43 Subject: Re: [Wlug] hardware problem? > I would try a new video card maybee. Reset your bios to factory > "safe" values. > > Do you see the bios come up on the screen at all? Does lilo/grub or > your bootloader come on the screen? > > > On Sun, 30 Jun 2002, avedis(a)ma.ultranet.com wrote: > > > I just had trouble booting into linux. Tried several times, but kept > > getting a blank screen, so I booted windoze. I noticed that I saw > > nothing on the screen until I got to my windows desktop, so I tried > > booting to linux again, and waited for my hard drive light to stop. Then > > I logged in with a blank screen, called up X, and it came up fine. > > > > Any ideas why my startup screen is missing? I haven't tried going into > > my bios yet, to see if it comes up on the screen. I'm not sure I > > remember how to get out of the bios on this machine, so I'm a little > > hesitant to go there. I'm not sure how to proceed, so any ideas are welcome. > > > > Athlon 1.2G, Spacewalker AK12A motherboard, ELSA GLoria L vid card, > > Viewsonic A70 monitor, 256RAM. > > > > I've got another computer here, so I could try switching monitors (not > > tonight). > > > > Thanks. > > > > Greg > > > > _______________________________________________ > > Wlug mailing list > > Wlug(a)mail.wlug.org > > http://mail.wlug.org/mailman/listinfo/wlug > > > > -- > > ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø > Karl Hiramoto <karl(a)hiramoto.org> > Work: 978-425-2090 ext 25 > Cell: 508-517-4819 > Personal web page: http://karl.hiramoto.org/ > Zoop Productions: http://www.zoop.org/ > KTEQ Rapid City: http://www.kteq.org/ > AOL IM ID = KarlH420 Yahoo_IM = karl_hiramoto > ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø > > A fail-safe circuit will destroy others. > -- Klipstein > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

July 1, 2002

Re: [Wlug] hardware problem?

by avedis＠ma.ultranet.com

No, nothing comes onto the screen until, in windows, my desktop appears, and in linux, didn't see lilo, I had to log in in the dark and call up an x session, and that comes up fine. I didn't try booting a clean dos disk, but I suspect I'll see nothing. G. Karl Hiramoto wrote: > I would try a new video card maybee. Reset your bios to factory > "safe" values. > > Do you see the bios come up on the screen at all? Does lilo/grub or > your bootloader come on the screen? > > > On Sun, 30 Jun 2002, avedis(a)ma.ultranet.com wrote: > > >>I just had trouble booting into linux. Tried several times, but kept >>getting a blank screen, so I booted windoze. I noticed that I saw >>nothing on the screen until I got to my windows desktop, so I tried >>booting to linux again, and waited for my hard drive light to stop. Then >> I logged in with a blank screen, called up X, and it came up fine. >> >>Any ideas why my startup screen is missing? I haven't tried going into >>my bios yet, to see if it comes up on the screen. I'm not sure I >>remember how to get out of the bios on this machine, so I'm a little >>hesitant to go there. I'm not sure how to proceed, so any ideas are welcome. >> >>Athlon 1.2G, Spacewalker AK12A motherboard, ELSA GLoria L vid card, >>Viewsonic A70 monitor, 256RAM. >> >>I've got another computer here, so I could try switching monitors (not >>tonight). >> >>Thanks. >> >>Greg >> >>_______________________________________________ >>Wlug mailing list >>Wlug(a)mail.wlug.org >>http://mail.wlug.org/mailman/listinfo/wlug >> > >

July 1, 2002