- WLUG - wlug.mailman3.com

Re: [Wlug] Next meeting location

by Stephen C. Daukas

From the WPI Library Parking Lot to Atwater Kent 233: Go up the 103 stairs on the LEFT SIDE of the library until you reach the front entrance of the Gordon Library. When facing the library, turn left and walk on the road which goes slightly downhill. Salisbury Labs will be on your left. You will approach a building on your right called Fuller Labs. Go past that building. The road curves to the left. You will then see the Atwater Kent building on your right. Enter that building and go upstairs. AK233 is up there somewhere. Clint Moyer wrote: > Where is Atwater Kent 233? > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > > >

Feb. 11, 2003

Next meeting location

by Clint Moyer

Where is Atwater Kent 233?

Feb. 11, 2003

Getting OpenOffice, ODBC and MySQL to play Nice

by Bill Smith

Okay... Most of you may already have heard of this (especially if you watch Slashdot), but it's worth posting for those that don't: http://www.linuxworld.com/2003/0207.barr.html Here, the author talks about getting OpenOffice.org, ODBC and MySQL working together (on Red Hat 8.0)... It looks like the first of two articles; the first explains what he did, the errors that resulted, and what he did to get around it. Next week, he's supposed to talk about using his new-found functionality, and whether it was worth the effort. FWIW, he said that he started using a how-to by John McCreesh, but there were enough differences between RH 7.3 and RH8.0 that it was almost useless. The article is certainly worth reading. It's getting late now (11pm EST), so I know what I'll be doing in the morning! ;) -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- William Smith wsmith-at-chezsmith-dot-com Fall River, MA http://www.chezsmith.com Random BOFH excuse: NOTICE: alloc: /dev/null: filesystem full * TAG! v3.1 *

Feb. 10, 2003

Re: [Wlug] floppy question

by Theo Van Dinter

On Mon, Feb 10, 2003 at 07:20:25AM -0500, Gary Hanley wrote: > One word of caution though: Don't rule out that the test floppy was bad > also. It's happened to me before and also with two CDROM drives. Especially > since those "nasty searching sounds" imply that the controller is fine and > is talking to the drive. Just to note: I did try multiple floppy disks, 2 different floppy drives, and at least 2 different cables. While the drive looks like it's properly being searched at bootup, it doesn't actually ever seem to get read. Very confusing. -- Randomly Generated Tagline: "Are [Linux users] lemmings collectively jumping off of the cliff of reliable, well-engineered commercial software?" (By Matt Welsh)

Feb. 10, 2003

qmail - several domain!

by Aramico - pop3.nomadss.com

Hi all, I've got my qmail server run so well, it's all nice. Ups, I've got something that bother me alyways! I have several domains hosted in my server where my qmail server running on too, The mail problem is, If somebody send me a message where the address is one of the my listed domain in my server, then.. if I read the mail from one of the available account from my server, here,. I'll receive all the email that attach to my username, so all my email address from the available domain are received in on of the account that I use to open the mail. So, how can I open one of my email address and I just receive the mail that attach to the address where I mean to ? Thanks Man.

Feb. 10, 2003

Re: [Wlug] floppy question

by Gary Hanley

On Sun, 9 Feb 2003, Wesley Allen wrote: > I guess the easiest solution would be to just get a usb floppy drive and > have your mom use that. What are they $25 now? > Wes Geeze, is there anything they won't put on USB anymore? :-) I did quick look because I never heard of such a thing and they do indeed exist. However the cheapest I saw was as $36. One word of caution though: Don't rule out that the test floppy was bad also. It's happened to me before and also with two CDROM drives. Especially since those "nasty searching sounds" imply that the controller is fine and is talking to the drive. -- Gary

Feb. 10, 2003

Re: [Wlug] floppy question

by Bill Smith

On Mon, 10 Feb 2003 10:03:37 -0500 Theo Van Dinter <felicity(a)kluge.net> wrote: TVD> On Mon, Feb 10, 2003 at 07:20:25AM -0500, Gary Hanley wrote: TVD> > One word of caution though: Don't rule out that the test floppy TVD> > was bad also. It's happened to me before and also with two CDROM TVD> > drives. Especially since those "nasty searching sounds" imply TVD> > that the controller is fine and is talking to the drive. TVD> TVD> Just to note: I did try multiple floppy disks, 2 different floppy TVD> drives, and at least 2 different cables. TVD> TVD> While the drive looks like it's properly being searched at bootup, TVD> it doesn't actually ever seem to get read. Very confusing. knowing you guys, it's likely the floppy controller (i know you would have checked the pin alignment on the connectors, right? <g>)... you have an option that i might be able to help with: i have some OLD cards kicking around.... <g> you might be able to use one of them for the floppy controller on THAT, if you want to give it a stab. ;) i have to take a trip up your way sometime soon anyway.... ahhh... the Hardware Genie strikes again! -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- William Smith wsmith-at-chezsmith-dot-com Fall River, MA http://www.chezsmith.com Every cloud has a silver lining. ...except mushroom- shaped ones, which have a lining of Iridium and Strontium 90. * TAG! v3.1 *

Feb. 10, 2003

Re: [Wlug] floppy question

by Wesley Allen

On Sun, 2003-02-09 at 16:37, Michelle Vadeboncoeur wrote: > I hope you guys don't mind a hardware-related question... The short of it > is, if a floppy controller appears dead, short of getting a new > motherboard how do I get a floppy drive to work on that system? > > I guess the easiest solution would be to just get a usb floppy drive and have your mom use that. What are they $25 now? Wes

Feb. 9, 2003

floppy question

by Michelle Vadeboncoeur

I hope you guys don't mind a hardware-related question... The short of it is, if a floppy controller appears dead, short of getting a new motherboard how do I get a floppy drive to work on that system? I recently upgraded my home computer so that I could play the new game I got for Christmas... So, the usual course of events is to play hand-me-down computer parts in my family, so my old computer would go to upgrade my mother's computer (admittedly a Windows98 box, used for Juno email/web and playing Solitaire... so no heavy usage). My old box is old in computer terms, but it's a heck of a lot faster than the P200 that my mother currently has. I rarely used my floppy drive (the last time prior to taking that box down was a few months prior). When transferring files from my old box to my new computer, I needed to run a Windows app off of a floppy - and discovered that the floppy drive didn't work on my old box. I tried swapping the 3.5" floppy drive out for another one that I had lying around, and that one didn't work either... I also tried swapping out the floppy cables, and that didn't work. BIOS sees the 3.5" floppy drive, but the box won't boot off of a boot floppy (that is readable on other computers) or read anything off of the floppy drive (makes nasty searching sounds) when in Windows... So, my guess is that the floppy drive controller on the motherboard isn't working... My mother is adamant that she needs a working floppy drive (old files saved, and so she can transfer stuff from work to home and back). I'd really like to give her my old box for a nice CPU/RAM upgrade, but unless I can get it to use a 3.5" floppy drive, she won't take it... Any suggestions as to how I can get a floppy drive to work on my old box? Or am I just out of luck for upgrading her with my old box? -- --==*==-- --==*==-- Michelle R. Vadeboncoeur --==*==-- --==*==-- mrv(a)kluge.net: http://www.kluge.net/~mrv/

Feb. 9, 2003

Re: [Wlug] ssh-dummy-shell for OpenSSH???

by ele3＠bach.eenetworks.com

Here's a chroot patch to sftp-server.c for openssh-3.5p1 that I use that may be of some use to you: http://www.alt219.com/software/sftp-server-chroot/ Ebon On Wed, 30 Jan 2002, Keller, Tim wrote: > I'm setting up a test environment using OpenSSH built in sFTP server. What > I want to-do is build a chroot environment where people can connect to the > machine via sFTP but not via SSH. > > I know with the commercial version of SSH they have ssh-dummy-shell which > when you try to connect via SSH just bails on you, but lets sFTP work > properly. > > I've done some digging on the web and I haven't found anything that'll > replace this functionality on the OpenSSH side of things. > > Anybody got any ideas/links of an open source version of ssh-dummy-shell. > > Thanks, > Tim. > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug

Feb. 9, 2003