- WLUG - wlug.mailman3.com

Re: [Wlug] Seeking help with a USB barcode scanner

by Jamie Guinan

On Fri, 30 Mar 2007, Andy Stewart wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > HI everybody, > > Does anybody in the group have any experience using a USB barcode > scanner with Linux? Its tough to google for "barcode scanner" since > each term brings up its own set of things which aren't what I seek. > > In particular, I have been loaned a USB barcode scanner which is made by > PSC, Inc. with model number QS2500. When I plug it into my laptop, the > USB vendor and device IDs are 04B4:0101. I looked this up on the Linux > USB devices website and it has multiple references (mostly to USB > keyboards). > > I think this device is being handled as a USB HID device, but I'm not > certain. Hi Andy, See if "evdev" is loaded, then try reading the various /dev/input/event* nodes. I have a USB keyboard here. Oh neat, under 2.6.19, they even give you a path that matches the device ids, # od -x /dev/input/by-id/usb-1241_1203-event-kbd (tap tap tap...) 0000000 92a9 460e 0000 0000 36dc 000b 0000 0000 0000020 0001 001c 0000 0000 92a9 460e 0000 0000 0000040 36e0 000b 0000 0000 0000 0000 0000 0000 ... C code, #include <linux/input.h> int keyboardFd = open(kbdev, O_RDWR); struct input_event ev; int n = read(keyboardFd, &ev, sizeof(ev)); See the fields in ev, you'll get events for press/release, keycode, etc. Have fun! -Jamie > > I'm wondering if Linux has any software that would read the value from a > barcode scanner and do something with it. If I knew which device file > was used, maybe I could "cat <devfile>" and see some output when I > scanned a barcode. > > Note that there are several examples of software for printing barcodes, > but that's not what I need (at least not yet). > > Any help would be appreciated. > > Thanks! > > Andy > > - -- > Andy Stewart, Founder > Worcester Linux Users' Group (http://www.wlug.org) > Chelmsford Linux Meetup Group (http://linux.meetup.com/393) > Amateur Radio: KB1OIQ > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.2 (GNU/Linux) > Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org > > iD8DBQFGDcRgHl0iXDssISsRAjF2AJ98hr6d4i2EMSQ5AvAWiiyfPLHdWACeLSm+ > uCN6IcuTTYvDZbz44z+t4I4= > =gdbi > -----END PGP SIGNATURE----- > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

March 31, 2007

Gigabit NICs for Linux

by sageman＠WPI.EDU

All, Recently, I've been looking to upgrade my current network setup and make the push to gigabit. At the moment, I'm looking for any suggestions on gigabit NICs that folks have got working under the 2.6 kernel, preferably without too much effort. I'm currently looking at the Rosewill RC-400, which supposedly uses the r8169 module. Any one happen to have any luck with that? Additionally, I'm looking for a gigabit switch. Only need like 4-8 ports and would like it, again, to work very easily. Never used a switch, just hubs and routers. Right now, have a hub hooked into a router. From what I understand, if I replace the hub with a switch, it should *just work*. Basically, a switch is like a hub, but with full duplex support and maybe some fancy QoS features or something, right? My plan is to plug the high bandwidth internetwork connections into the switch which then connects into my router and through to a cable modem. Basically, fast connection on the network for transferring files, streaming and such, but, when it comes to the internet, cable modem is the bottleneck, so who cares if the router supports gigabit, right? Does this sound reasonable to you network folks out there? Thanks for all your help! Carlton Stedman

March 31, 2007

Re: [Wlug] Seeking help with a USB barcode scanner

by Mike Leo

we had a demo model, too....it basically just scanned in the data as if you typed it in on the keyboard. ----- Original Message ---- From: Mike Frysinger <vapier(a)gentoo.org> To: wlug(a)mail.wlug.org Cc: Brian J. Conway <bconway(a)alum.wpi.edu>; andystewart(a)comcast.net Sent: Friday, March 30, 2007 10:44:56 PM Subject: Re: [Wlug] Seeking help with a USB barcode scanner On Friday 30 March 2007, Brian J. Conway wrote: > We used similar devices extensively in our wafer fab at my old job (hi > Mike), moo > though not under Linux more than a couple times as my desk. Since > my experience is only partially relevant, I can offer a few words as a > start. The scanners we used had interchangeable cables: When using a PS/2 > wedge (pass-thru) cable, it sat between the keyboard and the computer and > passed data as a standard keyboard, no drivers required and OS-agnostic. > When using a USB cable, it functioned as an HID device, and required only > the standard Windows HID keyboard driver. Scanning would send data as an > HID keyboard input. In both cases, it was transparent to any program we > were using (a simple terminal emulator, in our case), but we did need to > scan a configuration code out of the manual each time we changed cable > types. yeah, the scanners tend to be pretty simplistic ... they usually just send the scanned barcode values straight through ... actually, you'd be surprised how many of these things are runnnig Linux themselves ... some of them you can hijack, but once you get past the novelty of it, the device isnt terribly useful without their application ... -mike _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

March 31, 2007

Re: [Wlug] Seeking help with a USB barcode scanner

by Mike Frysinger

On Friday 30 March 2007, Brian J. Conway wrote: > We used similar devices extensively in our wafer fab at my old job (hi > Mike), moo > though not under Linux more than a couple times as my desk. Since > my experience is only partially relevant, I can offer a few words as a > start. The scanners we used had interchangeable cables: When using a PS/2 > wedge (pass-thru) cable, it sat between the keyboard and the computer and > passed data as a standard keyboard, no drivers required and OS-agnostic. > When using a USB cable, it functioned as an HID device, and required only > the standard Windows HID keyboard driver. Scanning would send data as an > HID keyboard input. In both cases, it was transparent to any program we > were using (a simple terminal emulator, in our case), but we did need to > scan a configuration code out of the manual each time we changed cable > types. yeah, the scanners tend to be pretty simplistic ... they usually just send the scanned barcode values straight through ... actually, you'd be surprised how many of these things are runnnig Linux themselves ... some of them you can hijack, but once you get past the novelty of it, the device isnt terribly useful without their application ... -mike

March 31, 2007

Re: [Wlug] Seeking help with a USB barcode scanner

by Brian J. Conway

On Fri, 30 Mar 2007 22:16:00 -0400 Andy Stewart <andystewart(a)comcast.net> wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > HI everybody, > > Does anybody in the group have any experience using a USB barcode > scanner with Linux? Its tough to google for "barcode scanner" since > each term brings up its own set of things which aren't what I seek. > > In particular, I have been loaned a USB barcode scanner which is made by > PSC, Inc. with model number QS2500. When I plug it into my laptop, the > USB vendor and device IDs are 04B4:0101. I looked this up on the Linux > USB devices website and it has multiple references (mostly to USB > keyboards). > > I think this device is being handled as a USB HID device, but I'm not > certain. > > I'm wondering if Linux has any software that would read the value from a > barcode scanner and do something with it. If I knew which device file > was used, maybe I could "cat <devfile>" and see some output when I > scanned a barcode. > > Note that there are several examples of software for printing barcodes, > but that's not what I need (at least not yet). > > Any help would be appreciated. > > Thanks! > > Andy We used similar devices extensively in our wafer fab at my old job (hi Mike), though not under Linux more than a couple times as my desk. Since my experience is only partially relevant, I can offer a few words as a start. The scanners we used had interchangeable cables: When using a PS/2 wedge (pass-thru) cable, it sat between the keyboard and the computer and passed data as a standard keyboard, no drivers required and OS-agnostic. When using a USB cable, it functioned as an HID device, and required only the standard Windows HID keyboard driver. Scanning would send data as an HID keyboard input. In both cases, it was transparent to any program we were using (a simple terminal emulator, in our case), but we did need to scan a configuration code out of the manual each time we changed cable types. Brian J. Conway

March 31, 2007

Seeking help with a USB barcode scanner

by Andy Stewart

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 HI everybody, Does anybody in the group have any experience using a USB barcode scanner with Linux? Its tough to google for "barcode scanner" since each term brings up its own set of things which aren't what I seek. In particular, I have been loaned a USB barcode scanner which is made by PSC, Inc. with model number QS2500. When I plug it into my laptop, the USB vendor and device IDs are 04B4:0101. I looked this up on the Linux USB devices website and it has multiple references (mostly to USB keyboards). I think this device is being handled as a USB HID device, but I'm not certain. I'm wondering if Linux has any software that would read the value from a barcode scanner and do something with it. If I knew which device file was used, maybe I could "cat <devfile>" and see some output when I scanned a barcode. Note that there are several examples of software for printing barcodes, but that's not what I need (at least not yet). Any help would be appreciated. Thanks! Andy - -- Andy Stewart, Founder Worcester Linux Users' Group (http://www.wlug.org) Chelmsford Linux Meetup Group (http://linux.meetup.com/393) Amateur Radio: KB1OIQ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFGDcRgHl0iXDssISsRAjF2AJ98hr6d4i2EMSQ5AvAWiiyfPLHdWACeLSm+ uCN6IcuTTYvDZbz44z+t4I4= =gdbi -----END PGP SIGNATURE-----

March 31, 2007

Re: [Wlug] DSL testing

by Keith Wright

> From: "Brian J. Conway" <bconway(a)alum.wpi.edu> > > Either way, I imagine a truck roll will still be your > best course of action. > Truck roll? Is that a typo? Is it like a ship biscuit? Or is it like a tractor pull? Or more like rolling your car over? -- Keith

March 30, 2007

Re: [Wlug] Upcoming meeting topic(s)

by Keith Wright

> From: Chuck Anderson <cra(a)WPI.EDU> > > On Wed, Mar 28, 2007 at 10:03:39PM -0500, Terry S wrote: > > > > I'm curious to understand, will these be publicly viewable > > pictures, or *only* viewable to those who have your key? > > Generally, you want your public key to be widely distributed. > Keeping the public key secret doesn't improve security. He's not worried about security, he just doesn't want his mother to see those pictures of him mooning the camera. I suppose we can trust the cameraman to use the pictures only as you ask. I was thinking of putting some low-res, but recognizable faces on the WLUG web site, to help us (i.e. me) to remember names. The key signing just made me think of it, but had nothing really to do with the plan. I am not sure why anyone would object to that unless it has something to do with the witness protection program, or running from the law. But I have neither camera nor write access to the web site, so it is not for me to say. -- Keith

March 30, 2007

Re: [Wlug] DSL testing

by Chuck Anderson

On Thu, Mar 29, 2007 at 01:57:42AM -0400, Keith Wright wrote: > > You won't be able to see real time Layer 2 stats of > > your circuit, as this information is accessed from > > the DSLAM in the Central Office. > > But I know I have heard some of you talking about > statistics gathering programs for network performance. > Does anyone know of a program that might help to > see how well a DSL line is working, or other > diagnostic tools for this? The only devices that would have access to the statistics he is talking about are your DSL modem and the DSLAM. If your modem doesn't provide the statistics, then there is no way to get them directly unless you had a hardware DSL analyzer to hook up to the line.

March 29, 2007

Re: [Wlug] Upcoming meeting topic(s)

by Chuck Anderson

On Wed, Mar 28, 2007 at 10:03:39PM -0500, Terry S wrote: > I have a new digital camera I haven't even used yet. I'd be more than > happy to bring my camera. > > I'm curious to understand, will these be publicly viewable pictures, or > *only* viewable to those who have your key? Generally, you want your public key to be widely distributed. Keeping the public key secret doesn't improve security.

March 29, 2007