- WLUG - wlug.mailman3.com

RE: [Wlug] funny

by Keller, Tim

What would be even funnier if at the bottom there was a little "Made with pride on a MAC using Adobe Illustrator" Tim. -----Original Message----- From: Wes Allen [mailto:wallen@charter.net] Sent: Tuesday, March 11, 2003 6:28 AM To: wlug(a)mail.wlug.org Subject: Re: [Wlug] funny On Tuesday 11 March 2003 12:59 am, Keith Wright wrote: > > From: Wes Allen <wallen(a)charter.net> > > > > I've got somethign to make you smile.... > > It didn't work. > > > Go to NHL.com and take a REAL good look at the page...... > > Is it just me or does one of the logos seem out of place? > > OK, I just spent more time reading the Sports Page in the last > 90 seconds than I have in the preceding five years, I see a Sun > logo and a MSN logo and a bunch of stuff I don't care about at > all. Maybe it's just you, or maybe it's your browser, or maybe > they changed the page before I got to see the funny blooper. > > What am I supposed to be looking for? You don't find "part of the msn network....powered by sun" funny? Wes > > -- Keith > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug -- ------ This message may be signed using GPG, for my public key please send me a message with "Key Request" in the subject line. _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

March 11, 2003

Re: [Wlug] funny

by Wes Allen

On Tuesday 11 March 2003 12:59 am, Keith Wright wrote: > > From: Wes Allen <wallen(a)charter.net> > > > > I've got somethign to make you smile.... > > It didn't work. > > > Go to NHL.com and take a REAL good look at the page...... > > Is it just me or does one of the logos seem out of place? > > OK, I just spent more time reading the Sports Page in the last > 90 seconds than I have in the preceding five years, I see a Sun > logo and a MSN logo and a bunch of stuff I don't care about at > all. Maybe it's just you, or maybe it's your browser, or maybe > they changed the page before I got to see the funny blooper. > > What am I supposed to be looking for? You don't find "part of the msn network....powered by sun" funny? Wes > > -- Keith > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug -- ------ This message may be signed using GPG, for my public key please send me a message with "Key Request" in the subject line.

March 11, 2003

Re: [Wlug] funny

by Keith Wright

> From: Wes Allen <wallen(a)charter.net> > > I've got somethign to make you smile.... It didn't work. > Go to NHL.com and take a REAL good look at the page...... > Is it just me or does one of the logos seem out of place? OK, I just spent more time reading the Sports Page in the last 90 seconds than I have in the preceding five years, I see a Sun logo and a MSN logo and a bunch of stuff I don't care about at all. Maybe it's just you, or maybe it's your browser, or maybe they changed the page before I got to see the funny blooper. What am I supposed to be looking for? -- Keith

March 11, 2003

funny

by Wes Allen

Hi everyone, I've got somethign to make you smile.... Go to NHL.com and take a REAL good look at the page...... Is it just me or does one of the logos seem out of place? :-) Wes -- ------ This message may be signed using GPG, for my public key please send me a message with "Key Request" in the subject line.

March 11, 2003

Re: [Wlug] reaction-diffusion program

by Gregory Avedissian

Andy, This program makes some pretty neat graphics, but it's very limited. I can choose the number of cells in x and y axes, and it makes spots or stripes. I have a qualitative understanding of it, but I don't know the math. A friend of mine said she'd look around for a book that explains it. Greg Andy Stewart wrote: > On Wednesday 05 March 2003 7:07 pm, Gregory Avedissian wrote: > >>Got it! I have to run two x servers at the same time (didn't know I >>could do that), the first one in TrueColor and the second in PseudoColor >>by starting the second one with >>startx -- :1 -bpp 8 > > > HI Greg, > > I'm glad to hear that you got it working! > > >>and the program runs ok. This is cool. Now all I need to do is figure >>out what reaction-diffusion means. > > > Darn, I was almost impressed that you knew what reaction-diffusion meant. Now > you went and burst my bubble. :-) > > If you want to see another cool program where the math will send you for a > loop but it makes neat looking graphical figures, try surf. Also, rasmol is > neat if you are into molecular modeling, or just looking a cool geeky looking > pictures. :-) > > Later, > > Andy

March 7, 2003

Re: [Wlug] reaction-diffusion program

by Andy Stewart

On Wednesday 05 March 2003 7:07 pm, Gregory Avedissian wrote: > Got it! I have to run two x servers at the same time (didn't know I > could do that), the first one in TrueColor and the second in PseudoColor > by starting the second one with > startx -- :1 -bpp 8 HI Greg, I'm glad to hear that you got it working! > > and the program runs ok. This is cool. Now all I need to do is figure > out what reaction-diffusion means. Darn, I was almost impressed that you knew what reaction-diffusion meant. Now you went and burst my bubble. :-) If you want to see another cool program where the math will send you for a loop but it makes neat looking graphical figures, try surf. Also, rasmol is neat if you are into molecular modeling, or just looking a cool geeky looking pictures. :-) Later, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

March 7, 2003

Re: [Wlug] reaction-diffusion program

by Gregory Avedissian

Got it! I have to run two x servers at the same time (didn't know I could do that), the first one in TrueColor and the second in PseudoColor by starting the second one with startx -- :1 -bpp 8 and the program runs ok. This is cool. Now all I need to do is figure out what reaction-diffusion means. I saw the math for it, and um, it looks like Greek to me. Anybody know anything about patterns of animal coat spots/stripes? Can anyone here figure out the mathematics of acupuncture point locations? (I know, I'm in way over my head here.) Greg Gregory Avedissian wrote: > I'm running in TrueColor, and I'm already in fvwm2. Same thing in twm. I > don't know anything about vnc, and I can't find anything about it on my > computer (help, man or apropos). Can't find anything about PseudoColor, > either. How do I switch it? Thanks. > > Greg > > > Steve Freitag wrote: > >> Here are a couple of things to check: >> >> - XAllocColorCells works with a PseudoColor visual. >> You may be running in TrueColor. Use xdpyinfo to find out. >> (grep for Color) >> - If you are in PseudoColor mode, you might not have enough >> free colors left. You might want to start a plain X session >> (no netscape etc) with a window manager like fvwm or twm. >> If you are familiar with vnc, you can start a vncserver in >> PseudoColor mode using the -cc 3 option. You may also >> want to modify xstartup (in your .vnc directory) to >> invoke a simpler xinitrc which starts fvwm or twm. >> >> >> -----Original Message----- >> From: wlug-admin(a)mail.wlug.org [mailto:wlug-admin@mail.wlug.org] On >> Behalf >> Of Gregory Avedissian >> Sent: Tuesday, March 04, 2003 11:43 AM >> To: wlug(a)mail.wlug.org >> Subject: [Wlug] reaction-diffusion program >> >> I'm trying to run a reaction-diffusion modeling program. Below is the >> link to the tarball. I was able to install it after editing the >> makefile (added -LX11R6 to the LIBS section, per generic >> instructions I found on a google search for the error message I got >> when make failed.) >> >> Here's the current problem: When I try to run the program with the >> sample parameters given in the readme.txt, I get the error message, >> "bad status from XAllocColorCells >> Segmentation fault" >> >> Note: I get occasional segmentation faults, possibly due to a flaky >> power supply. Those seem to be less frequent since I vacuumed the dust >> and cat hair out of the box. >> >> >> Here's a link to the tarball, in case anyone has the time or >> inclination to mess with it and/or offer advice. Oh yeah, I'm running >> SuSE 7.2. >> http://www.gvu.gatech.edu/people/faculty/greg.turk/reaction_diffusion/code/r >> >> eaction_diffusion.tar >> >> >> Thanks, >> Greg >> >> >> _______________________________________________ >> Wlug mailing list >> Wlug(a)mail.wlug.org >> http://mail.wlug.org/mailman/listinfo/wlug >> >> >> >> _______________________________________________ >> Wlug mailing list >> Wlug(a)mail.wlug.org >> http://mail.wlug.org/mailman/listinfo/wlug >> >> > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > >

March 6, 2003

Re: [Wlug] shared calendar (web-based)?

by Brett Russ

Bill Mills-Curran wrote: > I already have an old web calendar program, which works, but I'm not > very enthusiastic about it. Does anyone have a recommendation of a > web tool that will work? Ping pong is very important in the workplace. Nothing short of a high end time scheduling software package should do. However, given the budget requirements for the former, I would recommend and have been using Webcalendar on my site and like it so far: http://webcalendar.sourceforge.net/ There is a live demo there as well, but sometimes the language is not english. In that case, find the link for the login, demo/demo is usr/pw, and then find the link for prefs where you can change it to english. BR

March 5, 2003

Re: [Wlug] reaction-diffusion program

by Gregory Avedissian

I'm running in TrueColor, and I'm already in fvwm2. Same thing in twm. I don't know anything about vnc, and I can't find anything about it on my computer (help, man or apropos). Can't find anything about PseudoColor, either. How do I switch it? Thanks. Greg Steve Freitag wrote: > Here are a couple of things to check: > > - XAllocColorCells works with a PseudoColor visual. > You may be running in TrueColor. Use xdpyinfo to find out. > (grep for Color) > - If you are in PseudoColor mode, you might not have enough > free colors left. You might want to start a plain X session > (no netscape etc) with a window manager like fvwm or twm. > > If you are familiar with vnc, you can start a vncserver > in PseudoColor mode using the -cc 3 option. You may also > want to modify xstartup (in your .vnc directory) to > invoke a simpler xinitrc which starts fvwm or twm. > > > -----Original Message----- > From: wlug-admin(a)mail.wlug.org [mailto:wlug-admin@mail.wlug.org] On Behalf > Of Gregory Avedissian > Sent: Tuesday, March 04, 2003 11:43 AM > To: wlug(a)mail.wlug.org > Subject: [Wlug] reaction-diffusion program > > I'm trying to run a reaction-diffusion modeling program. Below is the > link to the tarball. I was able to install it after editing the makefile > (added -LX11R6 to the LIBS section, per generic instructions I found > on a google search for the error message I got when make failed.) > > Here's the current problem: When I try to run the program with the > sample parameters given in the readme.txt, I get the error message, > "bad status from XAllocColorCells > Segmentation fault" > > Note: I get occasional segmentation faults, possibly due to a flaky > power supply. Those seem to be less frequent since I vacuumed the dust > and cat hair out of the box. > > > Here's a link to the tarball, in case anyone has the time or inclination > to mess with it and/or offer advice. Oh yeah, I'm running SuSE 7.2. > http://www.gvu.gatech.edu/people/faculty/greg.turk/reaction_diffusion/code/r > eaction_diffusion.tar > > > Thanks, > Greg > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > >

March 5, 2003

RE: [Wlug] reaction-diffusion program

by Steve Freitag

Here are a couple of things to check: - XAllocColorCells works with a PseudoColor visual. You may be running in TrueColor. Use xdpyinfo to find out. (grep for Color) - If you are in PseudoColor mode, you might not have enough free colors left. You might want to start a plain X session (no netscape etc) with a window manager like fvwm or twm. If you are familiar with vnc, you can start a vncserver in PseudoColor mode using the -cc 3 option. You may also want to modify xstartup (in your .vnc directory) to invoke a simpler xinitrc which starts fvwm or twm. -----Original Message----- From: wlug-admin(a)mail.wlug.org [mailto:wlug-admin@mail.wlug.org] On Behalf Of Gregory Avedissian Sent: Tuesday, March 04, 2003 11:43 AM To: wlug(a)mail.wlug.org Subject: [Wlug] reaction-diffusion program I'm trying to run a reaction-diffusion modeling program. Below is the link to the tarball. I was able to install it after editing the makefile (added -LX11R6 to the LIBS section, per generic instructions I found on a google search for the error message I got when make failed.) Here's the current problem: When I try to run the program with the sample parameters given in the readme.txt, I get the error message, "bad status from XAllocColorCells Segmentation fault" Note: I get occasional segmentation faults, possibly due to a flaky power supply. Those seem to be less frequent since I vacuumed the dust and cat hair out of the box. Here's a link to the tarball, in case anyone has the time or inclination to mess with it and/or offer advice. Oh yeah, I'm running SuSE 7.2. http://www.gvu.gatech.edu/people/faculty/greg.turk/reaction_diffusion/code/r eaction_diffusion.tar Thanks, Greg _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

March 5, 2003

Re: [Wlug] reaction-diffusion program

by Gregory Avedissian

Andy Stewart wrote: > On Tuesday 04 March 2003 11:42 am, Gregory Avedissian wrote: > >>Here's the current problem: When I try to run the program with the >>sample parameters given in the readme.txt, I get the error message, >>"bad status from XAllocColorCells >>Segmentation fault" > > > Just a thought....if you bring up X with a different number of colors, does > that effect the problem? I would advise trying them all (8, 16, 32) and see > if the result is the same in each case. > > Later, > > Andy > Thanks, Andy. I tried 8, 16 and 24. Can't seem to get 32 to stick. I think that's a limitation of my vid card if I remember correctly. Anyway, there was no difference. I get a quick flash like a window is opening, then it disappears and I get the error message. Greg

March 5, 2003

Re: [Wlug] reaction-diffusion program

by Andy Stewart

On Tuesday 04 March 2003 11:42 am, Gregory Avedissian wrote: > Here's the current problem: When I try to run the program with the > sample parameters given in the readme.txt, I get the error message, > "bad status from XAllocColorCells > Segmentation fault" Just a thought....if you bring up X with a different number of colors, does that effect the problem? I would advise trying them all (8, 16, 32) and see if the result is the same in each case. Later, Andy -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

March 4, 2003

Re: [Wlug] Samba shares

by Michael Long

It turned out that there was a file that was a soft link to another in that directory. I guess that that confused windows. I would have expected windows to copy all but that linked file, but nooooo!!! it had to fail with a very nondescript error that was useless. <sarcasm>I just love windows</sarcasm> Mike > on the linux system checkt he permissions of the sub directories.. > Have read and execute permmmisions? > > On Tue, 4 Mar 2003, Michael Long wrote: > > > > > I have a directory which has been shared out using samba. I now need to > > move some of those files including subdirectories to a windows box > > running windows 2000 server. From the windows box I can copy files from > > the samba share but the subdirectories on the samba share fail to copy. > > Is this a samba issue or a winblows issue? Any help is appreciated. > > > > Thanks, > > Mike > > > > _______________________________________________ > > Wlug mailing list > > Wlug(a)mail.wlug.org > > http://mail.wlug.org/mailman/listinfo/wlug > > > > -- > > ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø > Karl Hiramoto <karl(a)hiramoto.org> > Work: 978-425-2090 ext 25 > Cell: 508-517-4819 > Personal web page: http://karl.hiramoto.org/ > Freedom: http://www.technojihad.com/ > Zoop Productions: http://www.zoop.org/ > KTEQ Rapid City: http://www.kteq.org/ > AOL IM ID = KarlH420 Yahoo_IM = karl_hiramoto > ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø > > Many people write memos to tell you they have nothing to say. > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > > >

March 4, 2003

Re: [Wlug] shared calendar (web-based)?

by Wesley Allen

On Tue, 2003-03-04 at 10:02, Bill Mills-Curran wrote: > I have some guys I work with who would like to be able to use a > web-based tool to help schedule ping-pong games. Part of the > requirement is that the players don't always have a partner and they > would like to advertise available times so that someone else is > encouraged to arrange a match with them. > > I already have an old web calendar program, which works, but I'm not > very enthusiastic about it. Does anyone have a recommendation of a > web tool that will work? > > FYI, I'm running Red Hat 8.0. > try phpgroupware. Wes > TIA, > Bill > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

March 4, 2003

Re: [Wlug] Samba shares

by Karl Hiramoto

on the linux system checkt he permissions of the sub directories.. Have read and execute permmmisions? On Tue, 4 Mar 2003, Michael Long wrote: > > I have a directory which has been shared out using samba. I now need to > move some of those files including subdirectories to a windows box > running windows 2000 server. From the windows box I can copy files from > the samba share but the subdirectories on the samba share fail to copy. > Is this a samba issue or a winblows issue? Any help is appreciated. > > Thanks, > Mike > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > -- ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø Karl Hiramoto <karl(a)hiramoto.org> Work: 978-425-2090 ext 25 Cell: 508-517-4819 Personal web page: http://karl.hiramoto.org/ Freedom: http://www.technojihad.com/ Zoop Productions: http://www.zoop.org/ KTEQ Rapid City: http://www.kteq.org/ AOL IM ID = KarlH420 Yahoo_IM = karl_hiramoto ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø Many people write memos to tell you they have nothing to say.

March 4, 2003

Samba shares

by Michael Long

I have a directory which has been shared out using samba. I now need to move some of those files including subdirectories to a windows box running windows 2000 server. From the windows box I can copy files from the samba share but the subdirectories on the samba share fail to copy. Is this a samba issue or a winblows issue? Any help is appreciated. Thanks, Mike

March 4, 2003

reaction-diffusion program

by Gregory Avedissian

I'm trying to run a reaction-diffusion modeling program. Below is the link to the tarball. I was able to install it after editing the makefile (added -LX11R6 to the LIBS section, per generic instructions I found on a google search for the error message I got when make failed.) Here's the current problem: When I try to run the program with the sample parameters given in the readme.txt, I get the error message, "bad status from XAllocColorCells Segmentation fault" Note: I get occasional segmentation faults, possibly due to a flaky power supply. Those seem to be less frequent since I vacuumed the dust and cat hair out of the box. Here's a link to the tarball, in case anyone has the time or inclination to mess with it and/or offer advice. Oh yeah, I'm running SuSE 7.2. http://www.gvu.gatech.edu/people/faculty/greg.turk/reaction_diffusion/code/… Thanks, Greg

March 4, 2003

shared calendar (web-based)?

by Bill Mills-Curran

I have some guys I work with who would like to be able to use a web-based tool to help schedule ping-pong games. Part of the requirement is that the players don't always have a partner and they would like to advertise available times so that someone else is encouraged to arrange a match with them. I already have an old web calendar program, which works, but I'm not very enthusiastic about it. Does anyone have a recommendation of a web tool that will work? FYI, I'm running Red Hat 8.0. TIA, Bill

March 4, 2003

RE: [Wlug] Java Question...

by Peter Nikolla

Steve Try class Runtime use Runtime.getRuntime(). This will let you interact with you environment. Process process = Runtime.getRuntime().exec(mCmdArray, mEnvp, mDir); Peter N. -----Original Message----- From: wlug-admin(a)mail.wlug.org [mailto:wlug-admin@mail.wlug.org]On Behalf Of Daukas, Stephen C Sent: Monday, March 03, 2003 11:40 AM To: wlug(a)mail.wlug.org Subject: [Wlug] Java Question... Hey guys! I have a really short Java question for you... How does one make a system call from Java? I want to be able to run a Linux command, e.g., System("command"); in C. The idea behind this is that I'm writing an example Java program to install an application, for example Postfix, that I may want to use as an example for Students... Later! Steve _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

March 4, 2003

Re: [Wlug] Java Question...

by Karl Hiramoto

Try googing for it? I did "java system call exec" and got http://stein.cshl.org/jade/distrib/docs/java.lang.Runtime.html#exec(java.la… Does that work? There might be issues with the VM security. But this is a linux list :) On Mon, 3 Mar 2003, Daukas, Stephen C wrote: > > Hey guys! > > I have a really short Java question for you... How does one make a system > call from Java? I want to be able to run a Linux command, e.g., > System("command"); in C. > > The idea behind this is that I'm writing an example Java program to install > an application, for example Postfix, that I may want to use as an example for > Students... > > Later! > Steve > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > -- ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø Karl Hiramoto <karl(a)hiramoto.org> Work: 978-425-2090 ext 25 Cell: 508-517-4819 Personal web page: http://karl.hiramoto.org/ Freedom: http://www.technojihad.com/ Zoop Productions: http://www.zoop.org/ KTEQ Rapid City: http://www.kteq.org/ AOL IM ID = KarlH420 Yahoo_IM = karl_hiramoto ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø Neutrinos have bad breadth.

March 3, 2003

Re: [Wlug] Simple Java Question...

by Peter Gutowski

<opinion confidencelevel="pretty-sure">I don't believe there's a direct way of doing that in Java. </opinion> But, inspite of the fact that it flys in the face of platform independence and security, you could write a class with native methods that could do that. Just don't tell anyone. -Peter On Monday, March 3, 2003 11:55 AM, Stephen Daukas <stephen(a)daukas.com> wrote: > >Hey guys! > >I have a really short Java question for you... How does one make a >system call from Java? I want to be able to run a Linux command as I >would in C, e.g., System("command"); > >The idea behind this is that I'm writing an example Java program to >install an application, for example Postfix, that I may want to use as >an example for Students... > >Later! >Steve -- Peter Gutowski - peter(a)linuxchamps.com - 413-531-0123 Carpenter's Axiom: Measure twice, cut once.

March 3, 2003

redhat 8.1 guesstmate?

by Karl Hiramoto

Anyone out there have a feeling for when it's going to hit the FTP sites? Final beta done testing? I have a machine to install, an it feels like if a wait a week 8.1 might be out. -- ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø Karl Hiramoto <karl(a)hiramoto.org> Work: 978-425-2090 ext 25 Cell: 508-517-4819 Personal web page: http://karl.hiramoto.org/ Freedom: http://www.technojihad.com/ Zoop Productions: http://www.zoop.org/ KTEQ Rapid City: http://www.kteq.org/ AOL IM ID = KarlH420 Yahoo_IM = karl_hiramoto ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø You have no real enemies.

March 3, 2003

Simple Java Question...

by Stephen Daukas

Hey guys! I have a really short Java question for you... How does one make a system call from Java? I want to be able to run a Linux command as I would in C, e.g., System("command"); The idea behind this is that I'm writing an example Java program to install an application, for example Postfix, that I may want to use as an example for Students... Later! Steve

March 3, 2003

Java Question...

by Daukas, Stephen C

Hey guys! I have a really short Java question for you... How does one make a system call from Java? I want to be able to run a Linux command, e.g., System("command"); in C. The idea behind this is that I'm writing an example Java program to install an application, for example Postfix, that I may want to use as an example for Students... Later! Steve

March 3, 2003

Re: [Wlug] Make the diffrence!

by aramico＠duahati.com

----- Original Message ----- From: <aramico(a)duahati.com> To: <wlug(a)mail.wlug.org> Sent: Friday, February 28, 2003 10:42 AM Subject: [Wlug] Make the diffrence! > Hi all, > > Can you please tell me how can I make a line that will not proccessed in > file named /etc/passwd. > There are so many users in my machine, what I want to do is I want to > clasisfication the user with a defined title, > so by this, I can easily see where the user is according the definition that > I'll make. > > > Eg in file /etc/passwd > > I want to make like this > > > # Europe - Jakarta > # South Asia - Jakarta > # Australia - Jakarta > > I want to put that words as comment in file /etc/passwd > > Can you friends tell me how to make it ? > > > > Thanks. > > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

Feb. 28, 2003