- WLUG - wlug.mailman3.com

Re: Keyboard recommendations

by Jeff Moyer

Frank Sweetser via WLUG <wlug(a)lists.wlug.org> writes: > My primary mechanical keyboard that I've been using for a while is starting > to go a little flakey on me, even after a few rounds of cleaning, so I'm > looking to finally replace it. I'm looking for something: > > - With fully mechanical keys (replaceable switches would be a nice bonus) > - Ergonomic layout, which these days seems to primarily mean a split > design > - Illuminated keycaps would be preferred > > Anyone have good recommendations they can share? I've tried the microsoft sculpt, split keyboards including the kinesis freestyle and the ultimate hacking keyboard, and the kinesis advantage (and the older classic). The kinesis advantage/classic is by far the best for me--nothing else even comes close. I've been using that keyboard for at least the past 15 years. Keyboards are a personal decision, though. I have a couple you could try out if you want to borrow them--the kinesis classic (ps2 connector required) and the kinesis freestyle, with the tenting accessory (for vertical typing). Good luck with your hunt! -Jeff

June 20, 2023

Re: Keyboard recommendations

by Eric Martin

I’m sure you’ve already looked; TrulyErgononic Cleave is my daily driver. It’s super comfy; I’m trying to see if I have a coupon since iirc they sent an email that they’re stopping production. https://trulyergonomic.com/ergonomic-keyboards/mechanical-keyboards/product… Eric > On Jun 16, 2023, at 19:51, Frank Sweetser via WLUG <wlug(a)lists.wlug.org> wrote: > > > My primary mechanical keyboard that I've been using for a while is starting to go a little flakey on me, even after a few rounds of cleaning, so I'm looking to finally replace it. I'm looking for something: > With fully mechanical keys (replaceable switches would be a nice bonus) > Ergonomic layout, which these days seems to primarily mean a split design > Illuminated keycaps would be preferred > Anyone have good recommendations they can share? > -- > - Frank > _______________________________________________ > WLUG mailing list -- wlug(a)lists.wlug.org > To unsubscribe send an email to wlug-leave(a)lists.wlug.org > Create Account: https://wlug.mailman3.com/accounts/signup/ > Change Settings: https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > Web Forum/Archive: https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/F6ZHF…

June 20, 2023

Re: Keyboard recommendations

by Chuck Anderson

Kinesis Freestyle Edge RGB. On Fri, Jun 16, 2023 at 07:51:30PM -0400, Frank Sweetser via WLUG wrote: > My primary mechanical keyboard that I've been using for a while is starting > to go a little flakey on me, even after a few rounds of cleaning, so I'm > looking to finally replace it. I'm looking for something: > > - With fully mechanical keys (replaceable switches would be a nice bonus) > - Ergonomic layout, which these days seems to primarily mean a split > design > - Illuminated keycaps would be preferred > > Anyone have good recommendations they can share? > -- > - Frank

June 20, 2023

Re: Keyboard recommendations

by Tim Keller

My two favorite keyboards are as follows: 1. Microsoft/Logitech Ergo keyboards. I've got a couple of these. I do like that out of the box Ubuntu fully supports the macro keys. 2. Kinesis Advantage 2. This keyboard took a bit for me to be comfortable using: https://www.amazon.com/Kinesis-Advantage2-Ergonomic-Keyboard-KB600LFQ Thanks, Tim. On Fri, Jun 16, 2023 at 10:03 PM Dan Davis via WLUG <wlug(a)lists.wlug.org> wrote: > I really like my Keychron v1 75% (function keys but no numpad). > > > https://www.keychron.com/products/keychron-v1-qmk-via-custom-mechanical-key… > > It's good a really heavy aluminum base, hot swap keys, and replaceable > caps. Keeb dorkdom is a REALLY deep rabbit hole as has already been said, > but with something like this you get a very useful keyboard that you can > build on later should you desire. > > On Fri, Jun 16, 2023, 19:51 Frank Sweetser via WLUG <wlug(a)lists.wlug.org> > wrote: > >> My primary mechanical keyboard that I've been using for a while is >> starting to go a little flakey on me, even after a few rounds of cleaning, >> so I'm looking to finally replace it. I'm looking for something: >> >> - With fully mechanical keys (replaceable switches would be a nice >> bonus) >> - Ergonomic layout, which these days seems to primarily mean a split >> design >> - Illuminated keycaps would be preferred >> >> Anyone have good recommendations they can share? >> -- >> - Frank >> _______________________________________________ >> WLUG mailing list -- wlug(a)lists.wlug.org >> To unsubscribe send an email to wlug-leave(a)lists.wlug.org >> Create Account: https://wlug.mailman3.com/accounts/signup/ >> Change Settings: >> https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ >> Web Forum/Archive: >> https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/F6ZHF… >> > _______________________________________________ > WLUG mailing list -- wlug(a)lists.wlug.org > To unsubscribe send an email to wlug-leave(a)lists.wlug.org > Create Account: https://wlug.mailman3.com/accounts/signup/ > Change Settings: > https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > Web Forum/Archive: > https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/LJUXE… > -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

June 19, 2023

Re: Keyboard recommendations

by Frank Sweetser

Thanks, I'll check them out! On Mon, Jun 19, 2023, 3:01 PM John Stoffel <john(a)stoffel.org> wrote: > >>>>> "Frank" == Frank Sweetser via WLUG <wlug(a)lists.wlug.org> writes: > > > My primary mechanical keyboard that I've been using for a while is > > starting to go a little flakey on me, even after a few rounds of > > cleaning, so I'm looking to finally replace it. I'm looking for > > something: > > > * With fully mechanical keys (replaceable switches would be a nice > bonus) > > * Ergonomic layout, which these days seems to primarily mean a split > design > > * Illuminated keycaps would be preferred > > > Anyone have good recommendations they can share? > > I've got a pair of WASDkeyboards 'CODE' keyboards. I wish the keycaps > were doubleshot for more durability, but I've been driving these for a > number of years now without any problems. These are TKL boards, not > split, but I find that they are ergonomic enough for me. Also, these > use the 'clear' stems from CherryMX, which means they're not super > loud or clicky. But people would still complain about how loud they > are on some conf calls at times. :-) > > Now that I work from home mostly (99% of the time) I don't help other > user's as much so maybe I should go down the ergonomic rathole and get > something really funky. But having to them move to a laptop and other > machines in the house makes me pause. > > Plus I'd then want to get TWO new keyboards so I have a primary and a > spare for when I needed it. >

June 19, 2023

Re: Keyboard recommendations

by John Stoffel

>>>>> "Frank" == Frank Sweetser via WLUG <wlug(a)lists.wlug.org> writes: > My primary mechanical keyboard that I've been using for a while is > starting to go a little flakey on me, even after a few rounds of > cleaning, so I'm looking to finally replace it. I'm looking for > something: > * With fully mechanical keys (replaceable switches would be a nice bonus) > * Ergonomic layout, which these days seems to primarily mean a split design > * Illuminated keycaps would be preferred > Anyone have good recommendations they can share? I've got a pair of WASDkeyboards 'CODE' keyboards. I wish the keycaps were doubleshot for more durability, but I've been driving these for a number of years now without any problems. These are TKL boards, not split, but I find that they are ergonomic enough for me. Also, these use the 'clear' stems from CherryMX, which means they're not super loud or clicky. But people would still complain about how loud they are on some conf calls at times. :-) Now that I work from home mostly (99% of the time) I don't help other user's as much so maybe I should go down the ergonomic rathole and get something really funky. But having to them move to a laptop and other machines in the house makes me pause. Plus I'd then want to get TWO new keyboards so I have a primary and a spare for when I needed it.

June 19, 2023

Re: Keyboard recommendations

by Dan Davis

I really like my Keychron v1 75% (function keys but no numpad). https://www.keychron.com/products/keychron-v1-qmk-via-custom-mechanical-key… It's good a really heavy aluminum base, hot swap keys, and replaceable caps. Keeb dorkdom is a REALLY deep rabbit hole as has already been said, but with something like this you get a very useful keyboard that you can build on later should you desire. On Fri, Jun 16, 2023, 19:51 Frank Sweetser via WLUG <wlug(a)lists.wlug.org> wrote: > My primary mechanical keyboard that I've been using for a while is > starting to go a little flakey on me, even after a few rounds of cleaning, > so I'm looking to finally replace it. I'm looking for something: > > - With fully mechanical keys (replaceable switches would be a nice > bonus) > - Ergonomic layout, which these days seems to primarily mean a split > design > - Illuminated keycaps would be preferred > > Anyone have good recommendations they can share? > -- > - Frank > _______________________________________________ > WLUG mailing list -- wlug(a)lists.wlug.org > To unsubscribe send an email to wlug-leave(a)lists.wlug.org > Create Account: https://wlug.mailman3.com/accounts/signup/ > Change Settings: > https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > Web Forum/Archive: > https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/F6ZHF… >

June 17, 2023

Re: [EXT] Keyboard recommendations

by Frank Sweetser

Yeah, I think my favorite out there one so far is this one that requires side view mirrors to learn to use it properly: https://www.allthingsergo.com/safetype-keyboard/ I've also avoided most of the kit ones, simply because I just don't have the time these days to do that much soldering. The Ergodox does seem like it fits the bill, even if it's on the pricier side, so I may just go with that one if nothing better appears. thanks! On Fri, Jun 16, 2023 at 7:53 PM Krichevsky, Nicholas <njkrichevsky(a)wpi.edu> wrote: > Don't go too deep into the world of ergo keyboards... People take it very > seriously. > > My immediate recommendations are either a Moonlander or Ergodox. I haven't > used either personally, but I've heard good things about them. > > Get Outlook for Android <https://aka.ms/AAb9ysg> > ------------------------------ > *From:* Frank Sweetser via WLUG <wlug(a)lists.wlug.org> > *Sent:* Friday, June 16, 2023 7:51:30 PM > *To:* Worcester Linux Users' Group General Discussion <wlug(a)lists.wlug.org > > > *Cc:* Frank Sweetser <frank.sweetser(a)gmail.com> > *Subject:* [EXT] [WLUG] Keyboard recommendations > > My primary mechanical keyboard that I've been using for a while is > starting to go a little flakey on me, even after a few rounds of cleaning, > so I'm looking to finally replace it. I'm looking for something: > > - With fully mechanical keys (replaceable switches would be a nice > bonus) > - Ergonomic layout, which these days seems to primarily mean a split > design > - Illuminated keycaps would be preferred > > Anyone have good recommendations they can share? > -- > - Frank > -- - Frank

June 17, 2023

Re: [EXT] Keyboard recommendations

by Krichevsky, Nicholas

Don't go too deep into the world of ergo keyboards... People take it very seriously. My immediate recommendations are either a Moonlander or Ergodox. I haven't used either personally, but I've heard good things about them. Get Outlook for Android<https://aka.ms/AAb9ysg> ________________________________ From: Frank Sweetser via WLUG <wlug(a)lists.wlug.org> Sent: Friday, June 16, 2023 7:51:30 PM To: Worcester Linux Users' Group General Discussion <wlug(a)lists.wlug.org> Cc: Frank Sweetser <frank.sweetser(a)gmail.com> Subject: [EXT] [WLUG] Keyboard recommendations My primary mechanical keyboard that I've been using for a while is starting to go a little flakey on me, even after a few rounds of cleaning, so I'm looking to finally replace it. I'm looking for something: * With fully mechanical keys (replaceable switches would be a nice bonus) * Ergonomic layout, which these days seems to primarily mean a split design * Illuminated keycaps would be preferred Anyone have good recommendations they can share? -- - Frank

June 16, 2023

Keyboard recommendations

by Frank Sweetser

My primary mechanical keyboard that I've been using for a while is starting to go a little flakey on me, even after a few rounds of cleaning, so I'm looking to finally replace it. I'm looking for something: - With fully mechanical keys (replaceable switches would be a nice bonus) - Ergonomic layout, which these days seems to primarily mean a split design - Illuminated keycaps would be preferred Anyone have good recommendations they can share? -- - Frank

June 16, 2023

Re: Laser cut puzzles?

by John Stoffel

>>>>> "Mike" == Mike Peckar via WLUG <wlug(a)lists.wlug.org> writes: > So, if you're a jigsaw puzzle fan, check out Bob Armstrong's page > at https://www.oldpuzzles.com/ and his son Conrad's page > at https://newpuzzles.com/ Very cool stuff! I'm looking more for a quick way to send my daughter at camp an interesting letter. I've done a spiral text, a crossword puzzle, and this year will be a real puzzle. It's something fun to keep me learning new stuff. Can't wait to take the laser class in Technocopia this monday. > Bob is a friend and is a fixture at Briarwood in Worcester. Cool, my neighbor Anita used to work there.

June 16, 2023

Re: Laser cut puzzles?

by Mike Peckar

So, if you're a jigsaw puzzle fan, check out Bob Armstrong's page at https://www.oldpuzzles.com/ and his son Conrad's page at https://newpuzzles.com/ Bob is a friend and is a fixture at Briarwood in Worcester. Mike On Mon, Jun 12, 2023 at 8:45 PM John Stoffel via WLUG <wlug(a)lists.wlug.org> wrote: > >>>>> "Dennis" == Dennis Payne <dulsi(a)identicalsoftware.com> writes: > > > Probably not helpful to you but I've used piczzle.com to create a > > wooden puzzle. Obviously this isn't as immediate as doing it locally. > > Probably also costs more. > > Thanks for the pointer! It's more picture oriented, but it does look > really slick and I could see doing this down the line for a family > photo for sure. > > > In my case I commissioned the image for the puzzle. Attached is a > > picture of it in progress. It is approximately 28"x20" when complete. > > Very nice! > > So just now I signed up for the laser cutter class next monday at > Technocopia in Worcester. I'll try to write up a review and share my > thoughts. I've got a basic inkscape plugin as well for generating the > puzzle pieces and then I layered on some text on top for the letter. > > Need to re-learn my inkscape so I can make it look better. > > John > _______________________________________________ > WLUG mailing list -- wlug(a)lists.wlug.org > To unsubscribe send an email to wlug-leave(a)lists.wlug.org > Create Account: https://wlug.mailman3.com/accounts/signup/ > Change Settings: > https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > Web Forum/Archive: > https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/T5JT4… >

June 14, 2023

Re: Laser cut puzzles?

by John Stoffel

>>>>> "Dennis" == Dennis Payne <dulsi(a)identicalsoftware.com> writes: > Probably not helpful to you but I've used piczzle.com to create a > wooden puzzle. Obviously this isn't as immediate as doing it locally. > Probably also costs more. Thanks for the pointer! It's more picture oriented, but it does look really slick and I could see doing this down the line for a family photo for sure. > In my case I commissioned the image for the puzzle. Attached is a > picture of it in progress. It is approximately 28"x20" when complete. Very nice! So just now I signed up for the laser cutter class next monday at Technocopia in Worcester. I'll try to write up a review and share my thoughts. I've got a basic inkscape plugin as well for generating the puzzle pieces and then I layered on some text on top for the letter. Need to re-learn my inkscape so I can make it look better. John

June 13, 2023

Re: Laser cut puzzles?

by Dennis Payne

Probably not helpful to you but I've used piczzle.com to create a wooden puzzle. Obviously this isn't as immediate as doing it locally. Probably also costs more. In my case I commissioned the image for the puzzle. Attached is a picture of it in progress. It is approximately 28"x20" when complete. -- Dennis Payne dulsi(a)identicalsoftware.com https://mastodon.gamedev.place/@dulsi

June 13, 2023

Re: Laser cut puzzles?

by Tim Keller

That's something that Technopia could definitely do. Tim. On Mon, Jun 12, 2023, 4:58 PM John Stoffel via WLUG <wlug(a)lists.wlug.org> wrote: > > Guys, > Anyone have a lead to where I could get a puzzle design cut out with a > laser from either thick cardboard or thin plywood? But I also want to > engrave a message on the puzzle pieces before they're cut out. > > I've been looking into inkscape pluggins for this and I think I've got > one I can use, it's now finding someone/place with the right > equipment. > > Any ideas? > > The message would just be text, maybe some simple graphics. Nothing > crazy, but the entire idea is to make the message into a puzzle to be > put together. > > John > _______________________________________________ > WLUG mailing list -- wlug(a)lists.wlug.org > To unsubscribe send an email to wlug-leave(a)lists.wlug.org > Create Account: https://wlug.mailman3.com/accounts/signup/ > Change Settings: > https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > Web Forum/Archive: > https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/24DOX… >

June 12, 2023

Laser cut puzzles?

by John Stoffel

Guys, Anyone have a lead to where I could get a puzzle design cut out with a laser from either thick cardboard or thin plywood? But I also want to engrave a message on the puzzle pieces before they're cut out. I've been looking into inkscape pluggins for this and I think I've got one I can use, it's now finding someone/place with the right equipment. Any ideas? The message would just be text, maybe some simple graphics. Nothing crazy, but the entire idea is to make the message into a puzzle to be put together. John

June 12, 2023

Re: Wacom One with Pressure Sensitivity

by Joshua Stone

I wonder how much GIMP has improved in recent years. Last I checked, its gtk3 port was only recently completed (many applications have moved onto gtk4 and gtk5 is being planned already), and native Wayland support is still a work-in-progress: Non-destructive editing is also not expected to be available for a long time: https://developer.gimp.org/core/roadmap/#gimp-30-development-branch-roadmap Good to see that it's usable with a tablet though! My wife has used GIMP before for drawing, but these days she prefers using Krita. It seems like the content creation story has a long way to go on Linux, but it might not be too long before features like HDR land: https://emersion.fr/blog/2023/hdr-hackfest-wrap-up/ https://pointieststick.com/2023/05/20/this-week-in-kde-preliminary-hdr-supp… - Josh On Sat, Jun 10, 2023 at 2:51 PM Dennis Payne via WLUG <wlug(a)lists.wlug.org> wrote: > I bought a used Wacom One a while ago. It is a drawing tablet (not a > standalone tablet as it needs to hook up to a computer). It has an display > that you can use the stylus on. > > You can find some examples of my bad art on mastodon: > > > https://cdn.masto.host/mastodongamedevplace/media_attachments/files/110/413… > > https://cdn.masto.host/mastodongamedevplace/media_attachments/files/110/469… > > Recently I finally determined how to turn on the pressure sensitivity in > gimp. If you go to Edit->Input Devices, you can enable "xwayland-tablet > stylus". (Obviously it probably has a different name if you aren't using > wayland.) Once enabled the "Dynamics" setting in Tool Options takes effect. > You can choose from a large variety of options. > > For example, "Basic Dynamics" makes pressure affect opacity and velocity > affect size. I've been using "Pressure Size" which simply makes pressure > affect the size of the pencil (or other tool). > > It probably hard to tell from this scaled down image but the lines for the > eyebrows have a different thickness from the larger outer lines. I used to > have to edit the tool settings to do that so this is nicer. I'm sure a > trained artist could produce better output. > > > https://cdn.masto.host/mastodongamedevplace/media_attachments/files/110/510… > > > -- > > Dennis Paynedulsi@identicalsoftware.comhttps://mastodon.gamedev.place/@dulsi > > _______________________________________________ > WLUG mailing list -- wlug(a)lists.wlug.org > To unsubscribe send an email to wlug-leave(a)lists.wlug.org > Create Account: https://wlug.mailman3.com/accounts/signup/ > Change Settings: > https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > Web Forum/Archive: > https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/M2MAH… >

June 11, 2023

Wacom One with Pressure Sensitivity

by Dennis Payne

I bought a used Wacom One a while ago. It is a drawing tablet (not a standalone tablet as it needs to hook up to a computer). It has an display that you can use the stylus on. You can find some examples of my bad art on mastodon: https://cdn.masto.host/mastodongamedevplace/media_attachments/files/110/413… https://cdn.masto.host/mastodongamedevplace/media_attachments/files/110/469… Recently I finally determined how to turn on the pressure sensitivity in gimp. If you go to Edit->Input Devices, you can enable "xwayland- tablet stylus". (Obviously it probably has a different name if you aren't using wayland.) Once enabled the "Dynamics" setting in Tool Options takes effect. You can choose from a large variety of options. For example, "Basic Dynamics" makes pressure affect opacity and velocity affect size. I've been using "Pressure Size" which simply makes pressure affect the size of the pencil (or other tool). It probably hard to tell from this scaled down image but the lines for the eyebrows have a different thickness from the larger outer lines. I used to have to edit the tool settings to do that so this is nicer. I'm sure a trained artist could produce better output. https://cdn.masto.host/mastodongamedevplace/media_attachments/files/110/510… -- Dennis Payne dulsi(a)identicalsoftware.com https://mastodon.gamedev.place/@dulsi

June 10, 2023

Re: Reminder! WLUG meeting tonight! Topic: Flipper Zero / NixOS

by Patrick McEvilly

We are out front of Morgan on the quad side. > On Jun 8, 2023, at 3:50 PM, Tim Keller via WLUG <wlug(a)lists.wlug.org> wrote: > > > Hey Gang! > > We've got a meeting tonight! > Time: 7PM > Date: June 8th, 2023 > !!LOCATION CHANGE!! WE will be meeting in the Morgan student center. > I think the best option is to meet on the quad side of Morgan until we can get let in. > Cara has reserved a conference room. > Virtual location: https://meet.jit.si/WlugMA > > > Cara Salter is going to show off her flipper zero. > If you don't know what the flipper zero is, you're in for a treat. You can check it out here: > https://flipperzero.one/ As they call it, it's a multitool for geeks. > > As usual, I'll have snacks and refreshments and afterwards we'll head off for dinner. > > Thanks, > Tim. > > > -- > I am leery of the allegiances of any politician who refers to their constituents as "consumers". > _______________________________________________ > WLUG mailing list -- wlug(a)lists.wlug.org > To unsubscribe send an email to wlug-leave(a)lists.wlug.org > Create Account: https://wlug.mailman3.com/accounts/signup/ > Change Settings: https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > Web Forum/Archive: https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/XK7OI…

June 8, 2023

Reminder! WLUG meeting tonight! Topic: Flipper Zero / NixOS

by Tim Keller

Hey Gang! We've got a meeting tonight! Time: 7PM Date: June 8th, 2023 !!LOCATION CHANGE!! WE will be meeting in the Morgan student center. I think the best option is to meet on the quad side of Morgan until we can get let in. Cara has reserved a conference room. Virtual location: https://meet.jit.si/WlugMA Cara Salter is going to show off her flipper zero. If you don't know what the flipper zero is, you're in for a treat. You can check it out here: https://flipperzero.one/ As they call it, it's a multitool for geeks. As usual, I'll have snacks and refreshments and afterwards we'll head off for dinner. Thanks, Tim. -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

June 8, 2023

WLUG Meeting this Thursday! Topic: Flipper Zero (maybe)

by Tim Keller

Hey Everybody, We've got a meeting this Thursday! Date: June 8th, 2023 Time: 7pm Location: WPI, still working out the room details Topic: Flipper Zero (hopefully), Otherwise, NixOS. At our last meeting, Cara spoke briefly about bring her Flipper Zero to show off. I managed to blow up my laptop with a failed Ubuntu upgrade and decided to experiment with NixOS. So I can show that off as well. Snacks and Refreshments will be provided and we'll do dinner afterwards. Thanks, Tim. -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

June 6, 2023

Re: Reminder: WLUG Meeting Tonight (May 18th 2023) Location: Higgins Lab 102

by Tim Keller

No problem. Jitsi was having some weird issue and we ended up with a broken camera. I ended up doing my slideshow on k8s networking. Sorry about the vlug element not working. Tim. On Thu, May 18, 2023, 8:29 PM Dennis Payne <dulsi(a)identicalsoftware.com> wrote: > I ended up unable to make it. I can do a demo next month. > > On Thu, 2023-05-18 at 19:25 -0400, Tim Keller via WLUG wrote: > > That would be cool! > > On Thu, May 18, 2023 at 3:56 PM Dennis Payne via WLUG <wlug(a)lists.wlug.org> > wrote: > > I played around with Love2D this morning. I can give a demo of it if you > want. Or it could be done at a different meeting. > > On Thu, 2023-05-18 at 14:02 -0400, Tim Keller via WLUG wrote: > > Hey Everybody, > > This is a reminder that we've got a meeting tonight! But not in our usual > location! > Instead we are going to be in Higgins lab in room 102! > > Date: May 18th, 2023 > Time: 7PM > Location: Higgins Lab (HL) Rm 102 > Virtual Location: https://meet.jit.si/WlugMA > Topic: Quick talk on linux name and network spaces. > > Snacks and drinks will be provided and we'll head off for dinner > afterwards! > Later, > Tim. > > -- > I am leery of the allegiances of any politician who refers to their > constituents as "consumers". > _______________________________________________ > WLUG mailing list -- wlug(a)lists.wlug.org > To unsubscribe send an email to wlug-leave(a)lists.wlug.org > Create Account: https://wlug.mailman3.com/accounts/signup/ > Change Settings: > https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > Web Forum/Archive: > https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/A7PUR… > > > _______________________________________________ > WLUG mailing list -- wlug(a)lists.wlug.org > To unsubscribe send an email to wlug-leave(a)lists.wlug.org > Create Account: https://wlug.mailman3.com/accounts/signup/ > Change Settings: > https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > Web Forum/Archive: > https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/SEBDZ… > > > > -- > I am leery of the allegiances of any politician who refers to their > constituents as "consumers". > _______________________________________________ > WLUG mailing list -- wlug(a)lists.wlug.org > To unsubscribe send an email to wlug-leave(a)lists.wlug.org > Create Account: https://wlug.mailman3.com/accounts/signup/ > Change Settings: > https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > Web Forum/Archive: > https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/WAUCZ… > > >

May 19, 2023

Re: Reminder: WLUG Meeting Tonight (May 18th 2023) Location: Higgins Lab 102

by Dennis Payne

I ended up unable to make it. I can do a demo next month. On Thu, 2023-05-18 at 19:25 -0400, Tim Keller via WLUG wrote: > That would be cool! > > On Thu, May 18, 2023 at 3:56 PM Dennis Payne via WLUG > <wlug(a)lists.wlug.org> wrote: > > I played around with Love2D this morning. I can give a demo of it > > if you want. Or it could be done at a different meeting. > > > > On Thu, 2023-05-18 at 14:02 -0400, Tim Keller via WLUG wrote: > > > Hey Everybody, > > > > > > This is a reminder that we've got a meeting tonight! But not in > > > our usual location! > > > Instead we are going to be in Higgins lab in room 102! > > > > > > Date: May 18th, 2023 > > > Time: 7PM > > > Location: Higgins Lab (HL) Rm 102 > > > Virtual Location: https://meet.jit.si/WlugMA > > > Topic: Quick talk on linux name and network spaces. > > > > > > Snacks and drinks will be provided and we'll head off for dinner > > > afterwards! > > > Later, > > > Tim. > > > > > > -- > > > I am leery of the allegiances of any politician who refers to > > > their constituents as "consumers". > > > _______________________________________________ > > > WLUG mailing list -- wlug(a)lists.wlug.org > > > To unsubscribe send an email to wlug-leave(a)lists.wlug.org > > > Create Account: https://wlug.mailman3.com/accounts/signup/ > > > Change Settings: > > > https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > > > Web Forum/Archive: > > > > > https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/A7PUR… > > > > > > _______________________________________________ > > WLUG mailing list -- wlug(a)lists.wlug.org > > To unsubscribe send an email to wlug-leave(a)lists.wlug.org > > Create Account: https://wlug.mailman3.com/accounts/signup/ > > Change Settings: > > https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > > Web Forum/Archive: > > https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/SEBDZ… > > > -- > I am leery of the allegiances of any politician who refers to their > constituents as "consumers". > _______________________________________________ > WLUG mailing list -- wlug(a)lists.wlug.org > To unsubscribe send an email to wlug-leave(a)lists.wlug.org > Create Account: https://wlug.mailman3.com/accounts/signup/ > Change Settings: > https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > Web Forum/Archive: > https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/WAUCZ…

May 19, 2023

Re: Reminder: WLUG Meeting Tonight (May 18th 2023) Location: Higgins Lab 102

by Keith Wright

Tim Keller via WLUG <wlug(a)lists.wlug.org> writes: > Hey Everybody, > > Virtual Location: https://meet.jit.si/WlugMA I joined a few minutes before 7, so did one other. One other had enough of my guff, and left. I hung out a while and eventually saw a WLUG meeting, but first the video went out and then the audio became a steady buzz. I quit the meeting and got back in. Still buzzing. I go elsewhere. -- Keith

May 18, 2023

Re: WLUG Meeting Thursday May 18th 2023! Location: Higgins Lab Rm 102

by Tim Keller

Currently in Higgins but having A/V issues. On Thu, May 18, 2023 at 2:37 PM John Stoffel <john(a)stoffel.org> wrote: > >>>>> "Tim" == Tim Keller <turbofx(a)gmail.com> writes: > > > Fair enough.. At least in the future we'll have someone in WLUG with > > up to date medical training! > > If you ski, you'll find me at Mt. Wachusett this winter patrolling. :-) > -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

May 18, 2023