- WLUG - wlug.mailman3.com

Re: [Wlug] APT install question

by Andre Lehovich

--- Andy Stewart <andystewart(a)comcast.net> wrote: > 1) I have modified my /etc/apt/sources.list - it is not the standard one > from Kubuntu. Most of what I wanted to install couldn't be found with > the standard list, so I updated it with some automated website I found > via google. What's missing? Kubuntu should have almost everything other than a few non-free codecs. > 3) I googled for "cpufrequtils debian" and found version 002-2 of the > package, which I manually downloaded and installed. It noticed the > missing /etc/init.d/cpufrequtils file and it asked me if I wanted to > install a new one. I did, and now all seems to be fixed. For future reference, http://packages.ubuntu.com/cpufrequtils Note that mixing and matching packages from Debian and Ubuntu won't always work. --Andre __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

Jan. 2, 2007

Re: [Wlug] APT install question

by Aaron Haviland

Andy Stewart wrote, on Dec 30, 2006 at 12:30 EST: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Mike Perry wrote: > > Hmmm weird. I just tried to install cpufrequtils on my box and I didn't > > run into that problem. Sounds like a fluke to me. Try deleting the > > package from the cache '/var/cache/apt/archives' and reinstalling as > > Aaron detailed. > > HI guys, > > Thanks for the helpful suggestions. > > 1) I have modified my /etc/apt/sources.list - it is not the standard one > from Kubuntu. Most of what I wanted to install couldn't be found with > the standard list, so I updated it with some automated website I found > via google. It might be worth it to track down which archive the package is being downloaded from... you won't know where to send a bug report to otherwise! > 2) I deleted the package from the /var/cache/apt/archives directory and > attempted a reinstall after I ran apt-get update. Version 002-1 was > downloaded and the problem recurred. > > 3) I googled for "cpufrequtils debian" and found version 002-2 of the > package, which I manually downloaded and installed. It noticed the > missing /etc/init.d/cpufrequtils file and it asked me if I wanted to > install a new one. I did, and now all seems to be fixed. > > 4) When I apt-get remove the cpufrequtils package, it does not delete > the /etc/init.d/cpufrequtils file - this is strange - I expected it to > delete any/all files related to the package. This is true in both > versions of the package. dpkg allows for various states of package removal. Just removing the package will not touch conffiles (or is it config files? There's a distinction between the two terms). If you "apt-get remove --purge $PACKAGE" the package it will delete those as well. If you've already removed it, you must run "dpkg --purge $PACKAGE" to purge the conffiles (or is it config files?) as APT will complain that the package is already removed. -- Aaron Haviland cell: [617] 947 - 3629

Dec. 30, 2006

Re: [Wlug] APT install question

by Gregory Avedissian

Andy Stewart wrote: > > I prefer KDE over Gnome and that's why I'm giving Kubuntu a test drive. > I prefer KDE over Gnome, too, and what I've done with 'buntu is install the basic Ubuntu, and then add kde through apt-get. I seem to recall that doing it this way is one of the ways to enable the root account. (I could be wrong on that - it's been awhile.) > > I have used the smart package manager on SuSE (when the badly broke YaST > on OpenSuSE 10.1). I like it but didn't know the package name for > *Ubuntu. I have been using the Adept package manager, but I"ll install > Smart and give it a try. > To find package names: sudo apt-cache search <keyword> Have fun! Greg

Dec. 30, 2006

Re: [Wlug] APT install question

by Andy Stewart

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Mike Perry wrote: > Hmmm weird. I just tried to install cpufrequtils on my box and I didn't > run into that problem. Sounds like a fluke to me. Try deleting the > package from the cache '/var/cache/apt/archives' and reinstalling as > Aaron detailed. HI guys, Thanks for the helpful suggestions. 1) I have modified my /etc/apt/sources.list - it is not the standard one from Kubuntu. Most of what I wanted to install couldn't be found with the standard list, so I updated it with some automated website I found via google. 2) I deleted the package from the /var/cache/apt/archives directory and attempted a reinstall after I ran apt-get update. Version 002-1 was downloaded and the problem recurred. 3) I googled for "cpufrequtils debian" and found version 002-2 of the package, which I manually downloaded and installed. It noticed the missing /etc/init.d/cpufrequtils file and it asked me if I wanted to install a new one. I did, and now all seems to be fixed. 4) When I apt-get remove the cpufrequtils package, it does not delete the /etc/init.d/cpufrequtils file - this is strange - I expected it to delete any/all files related to the package. This is true in both versions of the package. > > I ran Kubuntu for a bit and switched back to Ubuntu as I find the > integration is much better. But under the hood they should be the same > system. When I was running Kubuntu I did find that it already had a > cpufreq tool built into its power management. cpufrequtils is in > universe and would be an add on. I prefer KDE over Gnome and that's why I'm giving Kubuntu a test drive. I've gotten very used to the GUI based sysadmin tools as supplied by SuSE (which I've used for many years). I'm looking for equivalents in *Ubuntu for such things like SCPM (profile management). > > I know Ubuntu's Gnome package manager, Synaptic, has a "fix broken > packages" option which may also fix this problem. Perhaps Adapt has > something similar. > > *Ubuntu also has smart if you are familiar with that. > sudo apt-get install smart-pm I have used the smart package manager on SuSE (when the badly broke YaST on OpenSuSE 10.1). I like it but didn't know the package name for *Ubuntu. I have been using the Adept package manager, but I"ll install Smart and give it a try. Thanks again for the help! Andy - -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA, USA http://www.wlug.org -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFFlqI+Hl0iXDssISsRAplYAJ9LF33lyx8RHqLuqCwwHA8aOKlBUACffrL0 l56gjny+kycTVCJ5w8oBMqY= =8365 -----END PGP SIGNATURE-----

Dec. 30, 2006

Re: [Wlug] APT install question

by Mike Perry

Hmmm weird. I just tried to install cpufrequtils on my box and I didn't run into that problem. Sounds like a fluke to me. Try deleting the package from the cache '/var/cache/apt/archives' and reinstalling as Aaron detailed. I ran Kubuntu for a bit and switched back to Ubuntu as I find the integration is much better. But under the hood they should be the same system. When I was running Kubuntu I did find that it already had a cpufreq tool built into its power management. cpufrequtils is in universe and would be an add on. I know Ubuntu's Gnome package manager, Synaptic, has a "fix broken packages" option which may also fix this problem. Perhaps Adapt has something similar. *Ubuntu also has smart if you are familiar with that. sudo apt-get install smart-pm ~Mike > On Sat, 2006-12-30 at 07:11 -0500, Aaron Haviland wrote: > > Andy Stewart wrote, on Dec 29, 2006 at 21:49 EST: > > > -----BEGIN PGP SIGNED MESSAGE----- > > > Hash: SHA1 > > > > > > > > > HI gang, > > > > > > I'm taking my first adventurous steps in the use of a Debian based > > > system (Kubuntu) on my new laptop (LC2464T). (No, I'm not trashing Suse > > > on all of my other systems). I've never previously used an APT based > > > system, so in this sense, I'm quite the newbie. > > > > I wouldn't suggest *Ubuntu as a canonical APT-based distro. There are > > still bugs there but the eye candy is better. > > > > > I'm getting an error when I install a package, and I'm not sure how to > > > resolve it. I've googled to no avail. Note in the output below that it > > > says that the file /etc/init.d/cpufrequtils does not exist, and yet (I > > > think) this is a file that belongs to the package which I'm trying to > > > install. > > > > Indeed it should be part of the package you're trying to install. Could > > you verify that the files does exist? By this point in the installation, > > the package is fully extracted, just not configured. > > > > > > A quick & dirty version of the dpkg installation procedure (APT is a front-end to dpkg/wget/etc) is: > > > > 1) Extract control information from the package. (You can find this > > stuff in /var/lib/dpkg/info/${PACKAGE}.* > > > > 2) Execute pre-install script, if it exists > > > > 3) Extract package. > > > > 4) Run post-install script, if it exists. (I think almost all packages > > have one) > > > > 5) ... > > > > 6) Profit! > > > > > > <snipped ...> > > > > > Get:2 http://us.archive.ubuntu.com edgy/universe cpufrequtils 002-1 [22.4kB] > > > Fetched 32.7kB in 1s (31.8kB/s) > > > > > Selecting previously deselected package cpufrequtils. > > > > 1, 2 > > > > 3 > > > > > Unpacking cpufrequtils (from .../cpufrequtils_002-1_amd64.deb) ... > > > > 4 > > > > > Setting up cpufrequtils (002-1) ... > > > update-rc.d: /etc/init.d/cpufrequtils: file does not exist > > > dpkg: error processing cpufrequtils (--configure): > > > subprocess post-installation script returned error exit status 1 > > > Errors were encountered while processing: > > > cpufrequtils > > > E: Sub-process /usr/bin/dpkg returned an error code (1) > > > ========== > > > > So at this point, the package should be completely extracted, but the > > postinstall is not processing correctly... the command it's trying to > > execute would be: "update-rc.d cpufrequtils defaults" to add the default > > init rc symlinks... > > > > It might be a bug in the package. It might be a fluke. Usually, try > > re-installing it (as you won't be able to do much else until you get it > > resolved, anyway...) > > > > apt-get install --reinstall cpufrequtils > > > > > > If not... good luck figuring out ubuntu's bug system. Debian's is quite > > nice, but if you've got a ubuntu bug, you *have* to use ubuntu's BTS > > instead. (And it appears there are no current bugs filed for ubuntu's > > cpufrequtils. Interestingly enough, Debian's BTS lists several bugs > > against the package, but none seemingly related to your problem.) > > > > > > > > Hmmm... also, how long ago did this happen? Ubuntu doesn't seem to have > > 002-1 in its archives anymore. The current version is 002-2. > > > > I don't know if you're using a front-end to APT, or taking it plain, but > > you might need to run "apt-get update" to refresh the package lists. > > > > > > That was a bit longer than I meant it to be... good luck! > > > > Alternatively, Some friends of mine in #linuxhelp on OFTC are usually > > around to help. I'm in there as 'guinea-pig' > > > > _______________________________________________ > > Wlug mailing list > > Wlug(a)mail.wlug.org > > http://mail.wlug.org/mailman/listinfo/wlug

Dec. 30, 2006

Re: [Wlug] APT install question

by Aaron Haviland

Andy Stewart wrote, on Dec 29, 2006 at 21:49 EST: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > HI gang, > > I'm taking my first adventurous steps in the use of a Debian based > system (Kubuntu) on my new laptop (LC2464T). (No, I'm not trashing Suse > on all of my other systems). I've never previously used an APT based > system, so in this sense, I'm quite the newbie. I wouldn't suggest *Ubuntu as a canonical APT-based distro. There are still bugs there but the eye candy is better. > I'm getting an error when I install a package, and I'm not sure how to > resolve it. I've googled to no avail. Note in the output below that it > says that the file /etc/init.d/cpufrequtils does not exist, and yet (I > think) this is a file that belongs to the package which I'm trying to > install. Indeed it should be part of the package you're trying to install. Could you verify that the files does exist? By this point in the installation, the package is fully extracted, just not configured. A quick & dirty version of the dpkg installation procedure (APT is a front-end to dpkg/wget/etc) is: 1) Extract control information from the package. (You can find this stuff in /var/lib/dpkg/info/${PACKAGE}.* 2) Execute pre-install script, if it exists 3) Extract package. 4) Run post-install script, if it exists. (I think almost all packages have one) 5) ... 6) Profit! <snipped ...> > Get:2 http://us.archive.ubuntu.com edgy/universe cpufrequtils 002-1 [22.4kB] > Fetched 32.7kB in 1s (31.8kB/s) > Selecting previously deselected package cpufrequtils. 1, 2 3 > Unpacking cpufrequtils (from .../cpufrequtils_002-1_amd64.deb) ... 4 > Setting up cpufrequtils (002-1) ... > update-rc.d: /etc/init.d/cpufrequtils: file does not exist > dpkg: error processing cpufrequtils (--configure): > subprocess post-installation script returned error exit status 1 > Errors were encountered while processing: > cpufrequtils > E: Sub-process /usr/bin/dpkg returned an error code (1) > ========== So at this point, the package should be completely extracted, but the postinstall is not processing correctly... the command it's trying to execute would be: "update-rc.d cpufrequtils defaults" to add the default init rc symlinks... It might be a bug in the package. It might be a fluke. Usually, try re-installing it (as you won't be able to do much else until you get it resolved, anyway...) apt-get install --reinstall cpufrequtils If not... good luck figuring out ubuntu's bug system. Debian's is quite nice, but if you've got a ubuntu bug, you *have* to use ubuntu's BTS instead. (And it appears there are no current bugs filed for ubuntu's cpufrequtils. Interestingly enough, Debian's BTS lists several bugs against the package, but none seemingly related to your problem.) Hmmm... also, how long ago did this happen? Ubuntu doesn't seem to have 002-1 in its archives anymore. The current version is 002-2. I don't know if you're using a front-end to APT, or taking it plain, but you might need to run "apt-get update" to refresh the package lists. That was a bit longer than I meant it to be... good luck! Alternatively, Some friends of mine in #linuxhelp on OFTC are usually around to help. I'm in there as 'guinea-pig' -- Aaron Haviland

Dec. 30, 2006

APT install question

by Andy Stewart

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 HI gang, I'm taking my first adventurous steps in the use of a Debian based system (Kubuntu) on my new laptop (LC2464T). (No, I'm not trashing Suse on all of my other systems). I've never previously used an APT based system, so in this sense, I'm quite the newbie. I'm getting an error when I install a package, and I'm not sure how to resolve it. I've googled to no avail. Note in the output below that it says that the file /etc/init.d/cpufrequtils does not exist, and yet (I think) this is a file that belongs to the package which I'm trying to install. Any and all help would be greatly appreciated - thanks! Here's the command and its output from Kubuntu 6.10. ========== # apt-get install cpufrequtils Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libcpufreq0 The following NEW packages will be installed: cpufrequtils libcpufreq0 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 32.7kB of archives. After unpacking 254kB of additional disk space will be used. Do you want to continue [Y/n]? y Get:1 http://us.archive.ubuntu.com edgy/universe libcpufreq0 002-1 [10.3kB] Get:2 http://us.archive.ubuntu.com edgy/universe cpufrequtils 002-1 [22.4kB] Fetched 32.7kB in 1s (31.8kB/s) Selecting previously deselected package libcpufreq0. (Reading database ... 88398 files and directories currently installed.) Unpacking libcpufreq0 (from .../libcpufreq0_002-1_amd64.deb) ... Selecting previously deselected package cpufrequtils. Unpacking cpufrequtils (from .../cpufrequtils_002-1_amd64.deb) ... Setting up libcpufreq0 (002-1) ... Setting up cpufrequtils (002-1) ... update-rc.d: /etc/init.d/cpufrequtils: file does not exist dpkg: error processing cpufrequtils (--configure): subprocess post-installation script returned error exit status 1 Errors were encountered while processing: cpufrequtils E: Sub-process /usr/bin/dpkg returned an error code (1) ========== - -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA, USA http://www.wlug.org -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFFldO9Hl0iXDssISsRAq1gAJ46+gxWgO9YomxhdJsp0i02GG30XgCfTll1 k584/OlsBqwCFII50BVox90= =VxI2 -----END PGP SIGNATURE-----

Dec. 30, 2006

Test...please ignore

by Andy Stewart

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 - -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA, USA http://www.wlug.org -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFFldK4Hl0iXDssISsRArctAJ9W/DRFiHEiLoJZo9ApGPvo7dTo6ACfTtZ2 qXhhobwHcadmxsOucQiZAoc= =kqJP -----END PGP SIGNATURE-----

Dec. 30, 2006

Re: [Wlug] Can't find files filling up disk

by Michael Zarozinski

Thank you! It was some daemons that didn't shut down properly! Theo Van Dinter wrote: > On Tue, Dec 26, 2006 at 12:27:33PM -0500, Michael Zarozinski wrote: > >> I'm getting warnings that one of my drives is 90% full but I can't find >> the files filling it up. >> >> /dev/hda3 4.9G 4.2G 512M 90% /var <<<<<<< >> >> But running "du -sh *" from / shows /var as only having 322M (full >> output is below). >> >> Any hints on where I can find the files filling up /dev/hda3??? >> > > Aha! I actually ask this exact question during interviews. :) > > There could be several reasons, but a common reason is daemons which are still > writing to log files which were deleted. Do something like "lsof | grep > deleted" and see what's being used. For instance, on my system: > > python 2323 mailman 3u REG 8,2 0 > 75931863 /var/log/mailman/error.5 (deleted) > > So it appears that there was some issue when log rotating where the mailman > proc didn't close the old file, so while it doesn't exist in the directory any > longer (and therefore won't count via du) it still exists in the filesystem > and takes up space (in this case, 0 bytes, but ...) > > > ------------------------------------------------------------------------ > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

Dec. 26, 2006

Re: [Wlug] Can't find files filling up disk

by Theo Van Dinter

On Tue, Dec 26, 2006 at 12:27:33PM -0500, Michael Zarozinski wrote: > I'm getting warnings that one of my drives is 90% full but I can't find > the files filling it up. > > /dev/hda3 4.9G 4.2G 512M 90% /var <<<<<<< > > But running "du -sh *" from / shows /var as only having 322M (full > output is below). > > Any hints on where I can find the files filling up /dev/hda3??? Aha! I actually ask this exact question during interviews. :) There could be several reasons, but a common reason is daemons which are still writing to log files which were deleted. Do something like "lsof | grep deleted" and see what's being used. For instance, on my system: python 2323 mailman 3u REG 8,2 0 75931863 /var/log/mailman/error.5 (deleted) So it appears that there was some issue when log rotating where the mailman proc didn't close the old file, so while it doesn't exist in the directory any longer (and therefore won't count via du) it still exists in the filesystem and takes up space (in this case, 0 bytes, but ...) -- randomly Selected Tagline: "I didn't have Scotch Tape for many years, but I sure as hell use it now." - Larry Young, 2002/06/16, discussion about not having email

Dec. 26, 2006

Re: [Wlug] Can't find files filling up disk

by Chuck Anderson

On Tue, Dec 26, 2006 at 12:27:33PM -0500, Michael Zarozinski wrote: > /dev/hda3 4.9G 4.2G 512M 90% /var <<<<<<< > root@games [/]# du -sh * > 322M var I would go to single user mode, unmount /var, and run a filesystem check on it. /sbin/telinit 1 umount /var /sbin/fsck -f /dev/hda3 You can also check for what is using the space on /var. I use du -sk so that I can sort the result in kilobytes: df -h /var df -hi /var du -sk /var/* | sort -n The last one won't catch files that begin with a ., so check for large dot files: ls -la /var du -sk /var/.[!.]* | sort -n

Dec. 26, 2006

Can't find files filling up disk

by Michael Zarozinski

Hi all, I'm getting warnings that one of my drives is 90% full but I can't find the files filling it up. Running "df -ha" shows: Filesystem Size Used Avail Use% Mounted on /dev/hda1 2.0G 789M 1.1G 42% / none 0 0 0 - /proc none 0 0 0 - /sys none 0 0 0 - /dev/pts usbfs 0 0 0 - /proc/bus/usb none 506M 0 506M 0% /dev/shm /dev/hda7 58G 1.9G 53G 4% /home /dev/hda6 2.0G 36M 1.9G 2% /tmp /dev/hda2 4.9G 2.6G 2.2G 55% /usr /dev/hda3 4.9G 4.2G 512M 90% /var <<<<<<< Problem disk none 0 0 0 - /proc/sys/fs/binfmt_misc sunrpc 0 0 0 - /var/lib/nfs/rpc_pipefs But running "du -sh *" from / shows /var as only having 322M (full output is below). Any hints on where I can find the files filling up /dev/hda3??? Thanks, Michael root@games [/]# du -sh * 8.0K aquota.user 6.4M bin 11M boot 168K dev 12K du_var 20M etc 8.0K hardware_status.html?mac=00:0C:F1:D7:9B:4B&action=update&status=RH_POST_KICKSTART &hk=cf36ac8c346755f3d318bbd694a168c7799c74de 1.7G home 8.0K initrd 129M lib 16K lost+found 16K media 8.0K misc 8.0K mnt 8.0K opt 0 pico 902M proc 8.0K quota.user 580M root 16M sbin 4.0M scripts 8.0K selinux 8.0K srv 0 sys 72K tftpboot 48K tmp 2.7G usr 322M var

Dec. 26, 2006

Re: [Wlug] Problem w/gcc

by Keith Wright

> From: Mike Frysinger <vapier(a)gentoo.org> > > On Sunday 24 December 2006 19:32, Keith Wright wrote: > > > From: Mike Frysinger <vapier(a)gentoo.org> > > > > > > if gcc is randomly ICEing, > > > > What's that then? ICE seems to be an acronym > > it's a gcc term: Internal Compiler Error Thank you, though this is a bit disapointing. I was hoping it meant Inexplicable Computer Error, or something else more general purpose. > > This could be your chance to get your entry > > in the jargon file, and if it becomes the > > next big catch-phrase you might even bargain > > to exchange the IP for some free advice. > > the thing run by esr ? yeah i could care less :p I'm guessing you couldn't care very much less without going negative. I was about to object that the jargon file is older than ESR, but that's not strictly true. In any case, he does run it, by the "You touch it, you own it" Hacker rule of IP. (Which is very different from the Lawyer's rule. They never have to Fix the Damned Thing.) Just for that, no free advice for you. -- Keith

Dec. 25, 2006

Re: [Wlug] Problem w/gcc

by Mike Frysinger

On Sunday 24 December 2006 19:32, Keith Wright wrote: > > From: Mike Frysinger <vapier(a)gentoo.org> > > > > if gcc is randomly ICEing, > > What's that then? ICE seems to be an acronym it's a gcc term: Internal Compiler Error > This could be your chance to get your entry > in the jargon file, and if it becomes the > next big catch-phrase you might even bargain > to exchange the IP for some free advice. the thing run by esr ? yeah i could care less :p -mike

Dec. 25, 2006

Re: [Wlug] Problem w/gcc

by Keith Wright

> From: Mike Frysinger <vapier(a)gentoo.org> > > if gcc is randomly ICEing, What's that then? ICE seems to be an acronym, but for what? The jargon file (Hacker's Dictionary) tells me what I already knew, that ICE means Intrusion Counter-measure Electronics in some fiction I read long ago, but this doesn't seem to have anything to do with your usage. Further search reveals some kind of graphic hardware or company called ICE, but the PCI graphic card is in a different thread. So what is ICE? This could be your chance to get your entry in the jargon file, and if it becomes the next big catch-phrase you might even bargain to exchange the IP for some free advice. -- Keith

Dec. 25, 2006

Re: [Wlug] Problem w/gcc

by freak4uxxx＠gmail.com

i'll give it a shot, thanks. -Eric -----Original Message----- From: Karl Hiramoto <karl(a)hiramoto.org> Subj: Re: [Wlug] Problem w/gcc Date: Sun Dec 24, 2006 6:36 am Size: 1K To: Worcester Linux Users Group <wlug(a)mail.wlug.org> Eric Martin wrote: > My laptop has been doing weird stuff lately. I built it a while ago > from Gentoo 2006.0 Stage 3, and every now and again it would turn off > while compiling something (usually if I had to upgrade glibc). I was > just trying to update mythtv and it crashed so I decided to level it > and start from scratch. I installed Gentoo 2006.1 Stage 3 and it's > doing the same thing. I went down to Stage 2 and I'm still having a > problem. I've done memtest in the past with clean results, but I'm > stuck because I don't know what the error is. While building a few > minutes ago I forgot to turn on swap space and it ran out of memory > before crashing (turning off). > > Is there anything I can do aside from piping the output to a file to > capture what the problem might be (tried it, not much help)? Has > anybody had similar problems with gcc / glibc? > > Thanks in advance > Eric My laptop will turn it self off if the temperature gets above 70C. Most laptops have some kind of temperature shut off function.. I would monitor your temperature with lmsensors, or mbmon (acpi temp zone). For me to control my Gentoo laptop temperature while compiling big packages, I have to have cpu frequency scaling running. If i run my 2.8ghz P4 laptop at 50% speed 1.4Ghz I don't have any temperature problems. I usually use the "powersave" or "ondemand" shedulers. Also you could try keeping a big enough space blow your laptop for air.. Assuming the temperature is the problem. -- -- Karl Hiramoto http://karl.hiramoto.org/ US VOIP: (1) 603.966.4448 Spain Casa (34) 951.273.347 Spain Mobil (34) 617.463.826 Yahoo_IM = karl_hiramoto GTalk= karl.hiramoto [at] gmail [d0t] com -- The most exciting phrase to hear in science, the one that heralds new discoveries, is not "Eureka!" (I found it!) but "That's funny ..." -- Isaac Asimov

Dec. 24, 2006

looking for a PCI graphics card

by Bill Mills-Curran

Thanks to all who found/offered a PCI graphics card. My problem has been solved, even though it hasn't been really understood. A friend found a card of unknown condition, and I tried it. As expected, the motherboard graphics became inactive when I booted with the PCI card. However, the PCI card didn't work either. (It's that "unknown condition" thing, I think.) After a couple of power cycles, I removed the PCI card, and, magically, the motherboard graphics began to work. I don't see anything new in the X config, so I can only think that the system reset the motherboard graphics card back to a functional state. If anyone has a better theory, I'd like to hear it. Thanks to all who responded with an offer of a graphics card. Thanks, Bill

Dec. 24, 2006

Re: [Wlug] Problem w/gcc

by Karl Hiramoto

Eric Martin wrote: > My laptop has been doing weird stuff lately. I built it a while ago > from Gentoo 2006.0 Stage 3, and every now and again it would turn off > while compiling something (usually if I had to upgrade glibc). I was > just trying to update mythtv and it crashed so I decided to level it > and start from scratch. I installed Gentoo 2006.1 Stage 3 and it's > doing the same thing. I went down to Stage 2 and I'm still having a > problem. I've done memtest in the past with clean results, but I'm > stuck because I don't know what the error is. While building a few > minutes ago I forgot to turn on swap space and it ran out of memory > before crashing (turning off). > > Is there anything I can do aside from piping the output to a file to > capture what the problem might be (tried it, not much help)? Has > anybody had similar problems with gcc / glibc? > > Thanks in advance > Eric My laptop will turn it self off if the temperature gets above 70C. Most laptops have some kind of temperature shut off function.. I would monitor your temperature with lmsensors, or mbmon (acpi temp zone). For me to control my Gentoo laptop temperature while compiling big packages, I have to have cpu frequency scaling running. If i run my 2.8ghz P4 laptop at 50% speed 1.4Ghz I don't have any temperature problems. I usually use the "powersave" or "ondemand" shedulers. Also you could try keeping a big enough space blow your laptop for air.. Assuming the temperature is the problem. -- -- Karl Hiramoto http://karl.hiramoto.org/ US VOIP: (1) 603.966.4448 Spain Casa (34) 951.273.347 Spain Mobil (34) 617.463.826 Yahoo_IM = karl_hiramoto GTalk= karl.hiramoto [at] gmail [d0t] com -- The most exciting phrase to hear in science, the one that heralds new discoveries, is not "Eureka!" (I found it!) but "That's funny ..." -- Isaac Asimov

Dec. 24, 2006

Re: [Wlug] taking a hack at /etc/group

by Mike Frysinger

On Saturday 23 December 2006 22:58, d.maly(a)ieee.org wrote: > Anyway, let me ask you this: would you direct me to a few more places > that would obviously carry the 'residue' of wrong group members, if > any? off the top of my head, i cant think of anything > I was considering forcing ownership to 'me' because normally 'me' does > not have root access to the files ... may be specific to Ubuntu ... nah, not Ubuntu specific ... but running like: chown -R me:users /home/me should certainly be safe -mike

Dec. 24, 2006

Re: [Wlug] taking a hack at /etc/group

by Mike Frysinger

On Saturday 23 December 2006 19:38, d.maly(a)ieee.org wrote: > The fix is to add 'me' to the audio line in /etc/group: correct > So here's the question: should I add 'me' to all such lines? sounds like you should > Seems too crude ... and there must be some file > "upstream" that would lead to 'me' being left off in the first place ?? i dont use ubuntu myself, but i imagine that whatever utility you use to add yourself to the proper groups, they'd all be frontends to editing /etc/group anyways as for not being in the groups in the first place, that would be traced back to how your user was created in the first place -mike

Dec. 24, 2006

taking a hack at /etc/group

by d.maly＠ieee.org

I stumbled across bug #48545 (https://launchpad.net/distros/ubuntu/+source/control-center/+bug/48545) when sound wouldn't work only for the "primary" user ('me') ... it *did* work for the other users on this computer, including others with access to root. The fix is to add 'me' to the audio line in /etc/group: audio:x:29:user1,user2,user3,me In the meantime, I noticed there were several lines in this file which included all users except 'me'. So here's the question: should I add 'me' to all such lines? Seems too crude ... and there must be some file "upstream" that would lead to 'me' being left off in the first place ?? Thanks, Doug

Dec. 24, 2006

Re: [Wlug] Problem w/gcc

by Mike Frysinger

On Saturday 23 December 2006 19:08, Eric Martin wrote: > Is there anything I can do aside from piping the output to a file to > capture what the problem might be (tried it, not much help)? it depends on the error if gcc is randomly ICEing, then it can commonly be caused by: - not enough physical ram - flaky hardware - flaky ram - cpu overheating the exact error message would point in the direction -mike

Dec. 24, 2006

Problem w/gcc

by Eric Martin

My laptop has been doing weird stuff lately. I built it a while ago from Gentoo 2006.0 Stage 3, and every now and again it would turn off while compiling something (usually if I had to upgrade glibc). I was just trying to update mythtv and it crashed so I decided to level it and start from scratch. I installed Gentoo 2006.1 Stage 3 and it's doing the same thing. I went down to Stage 2 and I'm still having a problem. I've done memtest in the past with clean results, but I'm stuck because I don't know what the error is. While building a few minutes ago I forgot to turn on swap space and it ran out of memory before crashing (turning off). Is there anything I can do aside from piping the output to a file to capture what the problem might be (tried it, not much help)? Has anybody had similar problems with gcc / glibc? Thanks in advance Eric

Dec. 24, 2006

Re: [Wlug] looking for a PCI graphics card

by Mike Frysinger

On Wednesday 20 December 2006 14:48, Mike Frysinger wrote: > On Wednesday 20 December 2006 14:26, Bill Mills-Curran wrote: > > I'm looking for a cheap PCI graphics card to see if that fixes the > > problem. Even a loaner would help. > > i probably have one i can part with ... some S3 virge or something yeah, i def have an extra one you can have -mike

Dec. 20, 2006

Re: [Wlug] looking for a PCI graphics card

by Bill Mills-Curran

On Wed, Dec 20, 2006 at 03:05:08PM -0500, Gary Hanley wrote: > Date: Wed, 20 Dec 2006 15:05:08 -0500 (EST) > From: Gary Hanley <gary(a)hanley.net> > To: Worcester Linux Users Group <wlug(a)mail.wlug.org> > Subject: Re: [Wlug] looking for a PCI graphics card > Precedence: list > Reply-To: Worcester Linux Users Group <wlug(a)mail.wlug.org> > > On Wed, 20 Dec 2006, Bill Mills-Curran wrote: > > The graphics (motherboard) on my linux box have stoped... I still > > have an ascii screen, but no graphics. (No errors in any logs, so I > > suspect a hardware failure.) > > I'm looking for a cheap PCI graphics card to see if that fixes the > > problem. Even a loaner would help. > > If you can't find a card, how about booting from a Gentoo or > Fedora CD with a GUI install interface to see what that returns? > > -- Gary Gary, Great idea. BTW, I don't get the graphics screen during the boot, either. I _did_ get it once or twice, then intermittently, then not at all, so I really suspect the video driver hardware. Bill

Dec. 20, 2006