- WLUG - wlug.mailman3.com

Re: [Wlug] OT: Looking for ISP

by Richard Klein

Thanks David! Do you know anything about data caps for Charter? On Mon, May 5, 2014 at 5:16 PM, dglaser(a)glaserresearch.net < dglaser(a)glaserresearch.net> wrote: > I live in the same general area (Malvern Rd) and your choice is either > Verizon DSL or Charter Cable. I used Verizon DSL and found it to be really > SLOOWWWW. The switching office is too far away for fast speeds. I use > charter and I get 30 mb download. It is more reliable than Verizon. The > phone trunk lines run under southbridge street and there is a severe water > problem along that route. One time my phone and dsl was out for three > days. > -David > > On May 5, 2014 at 4:44 PM Richard Klein <rich(a)richardklein.org> wrote: > > I'm moving back to Worcester after 5-ish years. I used speakeasy for DSL > when I lived near Indian Lake, but they aren't the same company anymore, > and the new place is just off Hope Ave, by the cemeteries, Hadwen Park, and > the Auburn line. Can anyone recommend a good ISP out that way, or a good > website to find an ISP? > > -- > Thanks! > Rich > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > > > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > >

May 5, 2014

Re: [Wlug] OT: Looking for ISP

by dglaser＠glaserresearch.net

I live in the same general area (Malvern Rd) and your choice is either Verizon DSL or Charter Cable. I used Verizon DSL and found it to be really SLOOWWWW. The switching office is too far away for fast speeds. I use charter and I get 30 mb download. It is more reliable than Verizon. The phone trunk lines run under southbridge street and there is a severe water problem along that route. One time my phone and dsl was out for three days. -David On May 5, 2014 at 4:44 PM Richard Klein <rich(a)richardklein.org> wrote: > I'm moving back to Worcester after 5-ish years. I used speakeasy for DSL > when I lived near Indian Lake, but they aren't the same company anymore, and > the new place is just off Hope Ave, by the cemeteries, Hadwen Park, and the > Auburn line. Can anyone recommend a good ISP out that way, or a good website > to find an ISP? > > -- > Thanks! > Rich > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

May 5, 2014

OT: Looking for ISP

by Richard Klein

I'm moving back to Worcester after 5-ish years. I used speakeasy for DSL when I lived near Indian Lake, but they aren't the same company anymore, and the new place is just off Hope Ave, by the cemeteries, Hadwen Park, and the Auburn line. Can anyone recommend a good ISP out that way, or a good website to find an ISP? -- Thanks! Rich

May 5, 2014

Re: [Wlug] Wlug Digest, Vol 127, Issue 2

by Kevin Harrington NR

Hi folks! I will be introducing OpenSCAD, a DSL for CAD modeling. It is a finite, functional scripting language that outputs shapes ready for 3d printing. It has a C like syntax that is parsed into an OpenCSG tree, that is then compiled down to a .stl triangular mesh. It supports all source code version control unlike most 3d design software, and also has a powerful library system for modular designing. If you install it ahead of time (or when you get here) i can do a live coding walk through. http://www.openscad.org/ http://www.openscad.org/cheatsheet/ On May 3, 2014 12:00 PM, <wlug-request(a)mail.wlug.org> wrote: > Send Wlug mailing list submissions to > wlug(a)mail.wlug.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://mail.wlug.org/mailman/listinfo/wlug > or, via email, send a message with subject or body 'help' to > wlug-request(a)mail.wlug.org > > You can reach the person managing the list at > wlug-owner(a)mail.wlug.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Wlug digest..." > > > Today's Topics: > > 1. Announce: May meeting? Yes! See the Technocopia hackerspace. > (Chuck Anderson) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 2 May 2014 18:43:00 -0400 > From: Chuck Anderson <cra(a)WPI.EDU> > Subject: [Wlug] Announce: May meeting? Yes! See the Technocopia > hackerspace. > To: Worcester Linux Users Group <wlug(a)mail.wlug.org> > Message-ID: <20140502224300.GH16992(a)angus.ind.WPI.EDU> > Content-Type: text/plain; charset="us-ascii" > > Kevin Harrington has volunteered to give WLUG a tour of Technocopia, a > new maker/hacker space just a few blocks from campus. He's also > volunteered to talk about a programming language I forget the name of. > I figure we could meet in the Campus Center, and then walk down to > Technocopia. > > So here's the plan: > > WLUG Meeting Thursday, May 8 2014. > > 7:00 PM meet at WPI Campus Center, Chairman's Room. > > 7:15 PM or so, head down to Technocopia, 95 Prescott Street, > Worcester, MA 01605 > > More information about the hackerspace is available here: > > http://technocopia.org/ > > We'll go out for pizza afterwards. > > On Thu, May 01, 2014 at 03:35:01PM -0400, Tim Keller wrote: > > So is the may meeting going to be on the 8th? > > > > If so.. does anybody have a burning desire to talk about something? > > > > Thanks, > > Tim. > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: not available > Type: application/pgp-signature > Size: 828 bytes > Desc: not available > Url : > http://mail.wlug.org/pipermail/wlug/attachments/20140502/e31c07b4/attachmen… > > ------------------------------ > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > > > End of Wlug Digest, Vol 127, Issue 2 > ************************************ >

May 3, 2014

Announce: May meeting? Yes! See the Technocopia hackerspace.

by Chuck Anderson

Kevin Harrington has volunteered to give WLUG a tour of Technocopia, a new maker/hacker space just a few blocks from campus. He's also volunteered to talk about a programming language I forget the name of. I figure we could meet in the Campus Center, and then walk down to Technocopia. So here's the plan: WLUG Meeting Thursday, May 8 2014. 7:00 PM meet at WPI Campus Center, Chairman's Room. 7:15 PM or so, head down to Technocopia, 95 Prescott Street, Worcester, MA 01605 More information about the hackerspace is available here: http://technocopia.org/ We'll go out for pizza afterwards. On Thu, May 01, 2014 at 03:35:01PM -0400, Tim Keller wrote: > So is the may meeting going to be on the 8th? > > If so.. does anybody have a burning desire to talk about something? > > Thanks, > Tim.

May 2, 2014

May meeting?

by Tim Keller

So is the may meeting going to be on the 8th? If so.. does anybody have a burning desire to talk about something? Thanks, Tim. -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

May 1, 2014

Fedora Next

by dulsi＠identicalsoftware.com

Recently I decided to try to get my program Bt Builder into Fedora (https://bugzilla.redhat.com/show_bug.cgi?id=1079064) They identified some issues during review which I've fixed. Initially I didn't do the "introdution" email to the devel because I was joining to package my project and eventually maybe some others. I did eventually join the list and send the email. However I've also been reading the Fedora Present and Future articles on the Fedora Magazine site http://fedoramagazine.org/fedora-present-and-future-a-fedora-next-2014-upda… It's left me wondering if I should bother going with sponsorship into Fedora. I can setup a COPR and perhaps move into the distribution via the Playground. Do you Fedora will continue with the current sponsorship model? Will new projects instead come in through the personal repositories of COPR?

April 29, 2014

Lightning Talks @ LOPSA-East 2014!

by Evan Pettrey

LOPSA East 2014 starts in one week! All the talks have been scheduled, all the tutorials and instructors have been book, now all you need to do is show up, right? In http://scottberkun.com/essays/24-how-to-get-the-most-out-of-conferences/ Scott Berkun (author of five books, including _The Year Without Pants_) states: "There is no better way to meet others and access the most interesting and friendly people than participating." The good news is that even this late in the game, there's still a way you you to participate: Lightning Talks! Lightning Talks are a series of five-minute talks (no slides!) where enthusiasm is paramount and almost anything that might be of interest to sysadmins is on-topic. Have an idea for a talk or tutorial for a future conference you want to try out? Give a Lightning Talk. Want to share a cool new trick with your peers? Give a Lightning Talk. Have an idea for a tool and want feedback? Give a Lightning Talk. Want to convince your peers to change how they do their jobs, or quit their jobs, or not to make the same mistake you did, or step away from the keyboard and learn to cook? Give a Lightning Talk. The Lightning Talks session is Saturday, May 3rd, at 3:30 p.m. There's room for at least nine talks, more if people use fewer than their allotted time (five minutes). To sign up for a Lightning Talk, send email to <lightningtalks(a)lopsaeast.org> or contact the Lightning Talks coordinator (Adam Moskowitz) at the conference and sign up in person. Talk slots are on a first-come, first-served basis; there will be a waiting list, and if there's time at the end of the session you can just step up to the microphone without signing up in advance (but don't count on this as all the slots are usually taken). Remember: Five minutes (hard limit), no slides, pretty much any topic. Yes, even cooking -- if you can find a way to tie it to system administration. There's no easier way to actively participate in the conference than to give a Lightning Talk! Best regards, Evan & the rest of the LOPSA-East Committee

April 25, 2014

Re: [Wlug] Tripwire vs rpm -V

by Eric Martin

Thanks! On Fri, Apr 18, 2014 at 06:17:45AM -0400, Eric Martin wrote: > I have a weird problem with tripwire on at least two of my servers. A run > of tripwire --check shows a few tripwire binaries have changed, which since > I didn't do it is very suspicious: > I expect twpol.txt to be changed since you update the policy. What is / > isn't missing is the glaring alert that tripwire doesn't match the RPM. > Also, the MD5 sum in tripwire on one machine doesn't match it on another, > and neither do the SHA1 sums as computed from the command line. While I'm > pretty good with CentOS, there are a few things that I'm still learning so > I'm thinking that I'm missing something here. Can anybody please shed some > light on this, especially the differing sha1sums? If these are binaries, > shouldn't they have the same sha1um? One word. Prelink. rpm -V undoes the prelink on-the-fly to be able to checksum the original unmodified binary. > Also, do I need to blow away this machine and rebuild? No, but you may want to un-prelink all your binaries and then disable prelink from running again. _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

April 18, 2014

Re: [Wlug] Tripwire vs rpm -V

by Chuck Anderson

On Fri, Apr 18, 2014 at 06:17:45AM -0400, Eric Martin wrote: > I have a weird problem with tripwire on at least two of my servers. A run > of tripwire --check shows a few tripwire binaries have changed, which since > I didn't do it is very suspicious: > I expect twpol.txt to be changed since you update the policy. What is / > isn't missing is the glaring alert that tripwire doesn't match the RPM. > Also, the MD5 sum in tripwire on one machine doesn't match it on another, > and neither do the SHA1 sums as computed from the command line. While I'm > pretty good with CentOS, there are a few things that I'm still learning so > I'm thinking that I'm missing something here. Can anybody please shed some > light on this, especially the differing sha1sums? If these are binaries, > shouldn't they have the same sha1um? One word. Prelink. rpm -V undoes the prelink on-the-fly to be able to checksum the original unmodified binary. > Also, do I need to blow away this machine and rebuild? No, but you may want to un-prelink all your binaries and then disable prelink from running again.

April 18, 2014