- WLUG - wlug.mailman3.com

Re: [Wlug] Screen goes blank with ubuntu and geforce 8800 GTS.

by Andy Stewart

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Kieran O'Callaghan wrote: > I have system I just put together with a PCI-Express Geforce 8800 GTS > running ubuntu 7.04. During installation of Ubuntu everything showed up > fine on screen. After installation, I ran into the problem that right > after grub starts loading linux, the screen goes blank (monitor light > turns from green to amber) and stays that way right up until X loads, at > which point I get video. This hasn't been a problem so far, but I just > installed some updates and it seems like now X isn't loading or I'm > getting some sort of message before X loads, because it turns on and > just stays blank the whole time. > It seems like it would be easy if I just put a different video card into > the system, but I don't even have another PCI express video card. I also > don't have any PCI video cards anymore. All I have are AGP cards and > the system doesn't have an AGP slot. So, it looks like taking the hard > drive out and moving it to another system is the only option. > Any thoughts on why the screen is doing that would be appreciated. The > monitor doesn't seem to be getting no signal, because normally it brings > up a message saying no signal rather than just blanking. It seems more > like it's gone into a power saving mode. I've tried it with other > monitors and had the same results. > Have you tried booting a Knoppix CD/DVD to see if the result is the same? If your video is OK when booted with Knoppix, you could mount your hard drive and fix it that way. I'd look at /boot/grub/menu.lst and comment out any gfxmenu commands for starters, since you mentioned that it goes out to lunch around that time. Later, Andy - -- Andy Stewart, Founder Worcester Linux Users' Group (http://www.wlug.org) Chelmsford Linux Meetup Group (http://linux.meetup.com/393) Amateur Radio: KB1OIQ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFGcx+dHl0iXDssISsRAiU7AJ47ZSW0RShrwCtbHarcUAHBJRsxegCfWk0A 65V8qnR5ltqtls/FIoeBdfE= =1DR7 -----END PGP SIGNATURE-----

June 15, 2007

Screen goes blank with ubuntu and geforce 8800 GTS.

by Kieran O'Callaghan

I have system I just put together with a PCI-Express Geforce 8800 GTS running ubuntu 7.04. During installation of Ubuntu everything showed up fine on screen. After installation, I ran into the problem that right after grub starts loading linux, the screen goes blank (monitor light turns from green to amber) and stays that way right up until X loads, at which point I get video. This hasn't been a problem so far, but I just installed some updates and it seems like now X isn't loading or I'm getting some sort of message before X loads, because it turns on and just stays blank the whole time. It seems like it would be easy if I just put a different video card into the system, but I don't even have another PCI express video card. I also don't have any PCI video cards anymore. All I have are AGP cards and the system doesn't have an AGP slot. So, it looks like taking the hard drive out and moving it to another system is the only option. Any thoughts on why the screen is doing that would be appreciated. The monitor doesn't seem to be getting no signal, because normally it brings up a message saying no signal rather than just blanking. It seems more like it's gone into a power saving mode. I've tried it with other monitors and had the same results. -- Kieran O'Callaghan

June 15, 2007

Re: [Wlug] Reminder: Meeting this evening 7:00 PM

by freak4uxxx＠gmail.com

i've palyed with it once or twice. Two heads are better than one, right? -Eric -----Original Message----- From: "Klein, Richard" <Richard.Klein(a)cytyc.com> Subj: Re: [Wlug] Reminder: Meeting this evening 7:00 PM Date: Thu Jun 14, 2007 12:58 pm Size: 887 bytes To: "Worcester Linux Users Group" <wlug(a)mail.wlug.org> > -----Original Message----- > From: Andy Stewart > > HI gang, > > I completely forgot that we have a WLUG meeting this evening > (Thursday, June 14th) at 7:00 PM. My apologies for not > updating the website or sending the normal reminder email. > > Let's get together and chat about our favorite subject - > Linux! We always find some way to entertain ourselves for an > hour or so before heading off to the pizza restaurant. > > I'll see you tonight. > > Andy I'm not sure if I'll make it tonight, but if I do, is anyone familiar with RoadNav (http://roadnav.sourceforge.net/)? I have it installed on my laptop, but I don't really know my way around the program yet, and I'd love to have someone show me what I can do with it. -- Rich Klein _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

June 14, 2007

Re: [Wlug] Reminder: Meeting this evening 7:00 PM

by Desdinova

Anyone who's heading down tonight happen to have an HD50 -> HD68 adaptor or centronics50 to HD68 cable they don't mind getting rid of for a few bucks? Take care, James

June 14, 2007

Re: [Wlug] Reminder: Meeting this evening 7:00 PM

by Klein, Richard

> -----Original Message----- > From: Andy Stewart > > HI gang, > > I completely forgot that we have a WLUG meeting this evening > (Thursday, June 14th) at 7:00 PM. My apologies for not > updating the website or sending the normal reminder email. > > Let's get together and chat about our favorite subject - > Linux! We always find some way to entertain ourselves for an > hour or so before heading off to the pizza restaurant. > > I'll see you tonight. > > Andy I'm not sure if I'll make it tonight, but if I do, is anyone familiar with RoadNav (http://roadnav.sourceforge.net/)? I have it installed on my laptop, but I don't really know my way around the program yet, and I'd love to have someone show me what I can do with it. -- Rich Klein

June 14, 2007

Re: [Wlug] Reminder: Meeting this evening 7:00 PM

by freak4uxxx＠gmail.com

I was gonna ask.... -Eric -----Original Message----- From: "Andy Stewart" <andy.stewart(a)amd.com> Subj: [Wlug] Reminder: Meeting this evening 7:00 PM Date: Thu Jun 14, 2007 11:58 am Size: 646 bytes To: wlug(a)mail.wlug.org HI gang, I completely forgot that we have a WLUG meeting this evening (Thursday, June 14th) at 7:00 PM. My apologies for not updating the website or sending the normal reminder email. Let's get together and chat about our favorite subject - Linux! We always find some way to entertain ourselves for an hour or so before heading off to the pizza restaurant. I'll see you tonight. Andy -- Andy Stewart Advanced Micro Devices Boston Design Center 90 Central St. MS 83-29 Boxborough, MA 01719 (978) 795-2669 _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

June 14, 2007

Reminder: Meeting this evening 7:00 PM

by Andy Stewart

HI gang, I completely forgot that we have a WLUG meeting this evening (Thursday, June 14th) at 7:00 PM. My apologies for not updating the website or sending the normal reminder email. Let's get together and chat about our favorite subject - Linux! We always find some way to entertain ourselves for an hour or so before heading off to the pizza restaurant. I'll see you tonight. Andy -- Andy Stewart Advanced Micro Devices Boston Design Center 90 Central St. MS 83-29 Boxborough, MA 01719 (978) 795-2669

June 14, 2007

JOBS - Linux drivers consulting roles

by John Spencer

We have a couple of clients here in MA looking for Linux consulting help. Details are as follows: Mid to Sr level Linux drivers Engineer Linux driver development contract for 9+ months in embedded development team. Job responsibilities include learning hardware from hardware design specs, developing a design and documenting it, developing the design, and debugging the driver in an embedded environment. Preferred candidate would have 3-6 years of Linux driver development. DUTIES AND RESPONSIBILITIES include the following: Focus will be on design and development of 2.6 Linux kernel drivers for proprietary FPGAs and some 3rd party parts like Ethernet switches. Experience developing Linux drivers in an embedded environment. Experience developing Linux drivers in Linux 2.6.current kernel is preferred but 2.4 is acceptable. Experience with PowerPC or processors Experience debugging Linux drivers. Able to work with current team members including kernel, driver, and application disciplines. Good oral and written communication skills. ************************************************************************ ************* Sr to Prin Level consultant (6 mths) Our Client is looking for a Linux Engineer to port their existing systems software platform (drivers, BSP's, kernel, applications) from 2.4 to 2.6 Linux. This effort has just started and and THEY have the kernel up and running (bash shell). Will upgrade the existing build infrastructure for loadable kernel modules to comply with Linux kbuild. Port existing loadable kernel modules, applications, and libraries written for version 2.4.20 to 2.6.17. Apply third-party and proprietary patches to the kernel source. Assist with hardware and user mode Linux-based simulator startup and initialization. Ideally, we need someone who has worked on this exact type of porting effort and has dealt with many of the issues/challenges in this type of port. Experience with UML is required since they use User ModeLinux as their Emulation/Development tool. Regards, John John Spencer (978) 256-1113 ext 7608 jspencer(a)optimaleng.com OPTIMAL ENGINEERING PARTNERS "Your Optimal partner for full-lifecycle engineering services in embedded and real-time, systems and application development" www.optimalengineering.com <http://www.optimalengineering.com/>

June 11, 2007

JOB - Unix File Systems - off-site work is fine

by John Spencer

We have a client looking for Unix File Systems long-term consulting help. This work can be done remotely with occasional visits to client site out of state. Details are as follows: Project Description: This is a need for a Sr. File Systems Engineer to work remotely via a virtual office, There is potential for a client visit every 6-8 weeks. This is a very strategic and high visibility project with a large end-client. Optical based storage, OSD project. This resource will be part of the core program that is in charge of fully designing a file system for work in conjunction with an OSD driver. There are around 5 people on the project - 2 SCSI engineers/1 file systems engineer/1 embedded engineer. They are in the architecture phase right now. Even with the consultant working from a virtual office, they will be held accountable to a regular schedule, (meaning you must work core business hours) Required Skills: - Unix file systems (Constructs such as VFS, vnodes, inodes, caching, B+trees, disk layouts, index and hashing mechanisms) - File System Internals experience is key (Understand of, and ability to comfortably converse about, inodes, allocations groups, how to manipulate internals of a file system) - SW development - Strong C - Strong Unix - Unix development tools - Embedded systems development is a big plus - NetBSD is a big plus **** A junior file systems engineer would still be considered as long as they have a reasonable amount of understanding of File systems internals. **** Regards, John John Spencer (978) 256-1113 ext 7608 jspencer(a)optimaleng.com OPTIMAL ENGINEERING PARTNERS "Your Optimal partner for full-lifecycle engineering services in embedded and real-time, systems and application development" www.optimalengineering.com <http://www.optimalengineering.com/>

June 11, 2007

Re: [Wlug] Hardware Vendor Search (a bit off list)

by Mike Leo

Expert Server Group in Bedford NH. http://www.expertserver.com/ Worked with them for years and they are awesome. Jenn Heiberg is our current rep, but Amy Fournier is cool, too. They are a var, too. VMWare experts and such. ----- Original Message ---- From: Tal Cohen <wlug(a)cohen123.com> To: wlug(a)mail.wlug.org Sent: Friday, June 8, 2007 3:20:36 PM Subject: [Wlug] Hardware Vendor Search (a bit off list)  Does anyone know a good, reliable, hardware vendor that they can recommend? I need to purchase 4-7 2U servers and our existing vendor is dragging his feet. Thanks, Tal _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

June 8, 2007