- WLUG - wlug.mailman3.com

2 audio questions...

by Bill Mills-Curran

1. Thanks to the hints from this group, I was able to get the ALSA sound driver modules installed on my RedHat 7.1 box. (The subwoofer sounds great.) Now, since I'm a newbie WRT adding modules, I don't know the _right_ way to get them to load at boot. Right now, I just added some modprobe lines to /etc/rc.d/rc.local, but I suspect that's not right. (I did add some options lines to /etc/modules.conf, but since the syntax is unfamiliar to me, I did not see a way to actually load the module -- perhaps insmod?) So, what's the right way to load a module at boot? 2. What's the best place to get started to be able to receive web radio broadcasts? I haven't found anything very helpful in the RH distro. Maybe I'm not looking for the right thing? TIA, Bill

Jan. 3, 2002

Re: [Wlug] January meeting?

by Theo Van Dinter

On Thu, Jan 03, 2002 at 11:54:18AM -0500, William Smith wrote: > When is it? http://www.wlug.org/ WLUG's Next Meeting Wednesday January 16th, 2001 7:00 PM The Meeting Topic is: (Tentatively) The Linux Distribution Bakeoff RedHat, SuSE, and ??? *NOTE: New Meeting Location* Perreault Hall Fuller Labs WPI Campus Worcester, MA, USA (Ooh, in Perreault. That'll be a very big room for WLUG ... Is this permanent?) -- Randomly Generated Tagline: `When you say "I wrote a program that crashed Windows", people just stare at you blankly and say "Hey, I got those with the system, *for free*".' (By Linus Torvalds)

Jan. 3, 2002

January meeting?

by William Smith

When is it? -- William Smith wsmith(a)chezsmith.com Fall River, MA http://www.chezsmith.com

Jan. 3, 2002

Installfest Time!

by Keller, Tim

Hey Everybody, As the Subject implies, it's Installfest time. I'm thinking of holding it the 9th of February, I'd like some input on if this is too early, etc... I'd also like other peoples input on stuff such as... 1. What distributions people should bring... 2. Possibly having a mini key signing party 3. Quake/Unreal/Castle Wolfenstein/tetrinet tournament. 4. Have some demonstrations going (such as transgaming running the sims/diablo2) Basically if you've got some idea that might improve the installfest, fire me an email! I'd also like some input from Andy about the possibility of using WLUG money to purchase something good for the raffle. I'm seeing if I can get us a big / better room for all this. Tim.

Jan. 3, 2002

test message

by Frank Sweetser

Test message to verify the list is working again -- Frank Sweetser fs at wpi.edu, fs at suave.net | $ x 15 Full-time WPI Network Tech, Part time Linux/Perl guy | "You afraid of cars?" --Kirk "[No], it's your driving." --Spock

Jan. 3, 2002

Re: [Wlug] sound module?

by Theo Van Dinter

On Sat, Dec 15, 2001 at 11:20:10PM -0500, Bill Mills-Curran wrote: > I got a new (old) machine, and I'm having problems getting the sound card > working. The machine is a DELL Optiplex GX1, and the sound card is built > into the mother board. I can't see anything on the motherboard that tells > me what kind of sound card is there. I can't even find anything about the > motherboard other than it's Dell. I did a quick Google search and found this: http://www.alsa-project.org/archive/alsa-user/msg05819.html It requires the ALSA driver along with isapnp. Hope this helps. :) -- Randomly Generated Tagline: Windows: Where do you want to go today? MacOS : Where do you want to be tomorrow? Linux : Are you coming or what? - June 2000 issue of Linux Journal

Dec. 16, 2001

Re: [Wlug] sound module?

by Bill Mills-Curran

Andy, It doesn't look like lspci finds it: bcurran_newguy> lspci 00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03) 00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03) 00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02) 00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) 00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) 00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02) 00:0e.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev 21) 00:0f.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) 01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c) Maybe I should just buy a new card? Bill On Sun, 16 Dec 2001, Andy Stewart wrote: > Date: Sun, 16 Dec 2001 00:20:26 -0500 > From: Andy Stewart <andystewart(a)mediaone.net> > Reply-To: wlug(a)mail.wlug.org > To: wlug(a)mail.wlug.org > Subject: Re: [Wlug] sound module? > > > > > Any ideas? > > > > Yup, try "lspci" and see if the sound chip is hard wired to the PCI bus on > your motherboard. If so, it'll show up when you type "lspci". At least > that's how it works on my motherboard. > > My example (partial lspci output for my sound chip): > 00:0c.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06) > > Later, > > Andy > -- > Andy Stewart > Founder > Worcester Linux Users' Group > Worcester, MA, USA > http://www.wlug.org > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

Dec. 16, 2001

Re: [Wlug] sound module?

by Andy Stewart

> > Any ideas? > Yup, try "lspci" and see if the sound chip is hard wired to the PCI bus on your motherboard. If so, it'll show up when you type "lspci". At least that's how it works on my motherboard. My example (partial lspci output for my sound chip): 00:0c.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06) Later, Andy -- Andy Stewart Founder Worcester Linux Users' Group Worcester, MA, USA http://www.wlug.org

Dec. 16, 2001

sound module?

by Bill Mills-Curran

I got a new (old) machine, and I'm having problems getting the sound card working. The machine is a DELL Optiplex GX1, and the sound card is built into the mother board. I can't see anything on the motherboard that tells me what kind of sound card is there. I can't even find anything about the motherboard other than it's Dell. There are messages in my system log: Dec 15 22:21:31 newguy modprobe: modprobe: Can't locate module sound-slot-0 Dec 15 22:21:31 newguy modprobe: modprobe: Can't locate module sound-service-0-0 I get these messages at boot and whenever I put a music CD in the drive. Any ideas? TIA, Bill

Dec. 16, 2001

Re: [Wlug] help: printing to MS98 server

by Bill Mills-Curran

I posted the problem below, and I finally found out what was wrong with my lpd setup -- nothing! The entire problem was a setup on the W98 settings for the driver. All I had to do was disable bi-directional support for the printer. (I think it was enabled because I have a scanner head for the printer.) Just thought the group might like to know. Bill On Fri, 7 Dec 2001, Bill Mills-Curran wrote: > Date: Fri, 7 Dec 2001 10:07:46 -0500 (EST) > From: Bill Mills-Curran <subssn594(a)charter.net> > Reply-To: wlug(a)mail.wlug.org > To: Worcester Linux Users Group <wlug(a)mail.wlug.org> > Subject: [Wlug] help: printing to MS98 server > > I thought I had success (well, I had some) setting up printing to my > W98 printer. What I find is that I can print a postscript file to the > printer just fine -- at least the first page. But, I can't get more > than the first page to go. Here's my commands. The first is for a > postscript file, and the second uses nenscript so that I can print a > text file. > > cat mail.ps | gs -dNOPAUSE -q -sDEVICE=bjc600 -sOutputFile=- - | smbclient //bertha/CANON -c 'print -' > > nenscript -B -p - < mail.txt | gs -dNOPAUSE -q -sDEVICE=bjc600 -sOutputFile=- - | smbclient //bertha/CANON -c 'print -' > > I think I'm doing something wrong with the gs command, but I don't see > what. > > TIA, > Bill > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

Dec. 15, 2001