- WLUG - wlug.mailman3.com

Re: [Wlug] 2 audio questions...

by Bill Mills-Curran

Charles, I've played with your suggestions a bit, and I have a few more, if you can help... On Thu, 3 Jan 2002, Charles R . Anderson wrote: > Date: Thu, 3 Jan 2002 14:57:11 -0500 > From: Charles R . Anderson <cra(a)WPI.EDU> > Reply-To: wlug(a)mail.wlug.org > To: Worcester Linux Users Group <wlug(a)mail.wlug.org> > Subject: Re: [Wlug] 2 audio questions... > > The alsa stuff comes with an initscript called alsasound in the utils/ > subdirectory of the source. It gets installed automatically with a > "make install" into /etc/rc.d/init.d/alsasound. You can enable > alsasound to start automatically with these commands: > > /sbin/chkconfig --add /etc/rc.d/init.d/alsasound > (only need to do this right after installing the first time) > > /sbin/chkconfig alsasound on > > or start/stop it at any time with these commands: > > /sbin/service alsasound start > /sbin/service alsasound stop > > On Thu, Jan 03, 2002 at 02:42:01PM -0500, Bill Mills-Curran wrote: > subssn594> So, what's the right way to load a module at boot? I played briefly with the alsasound service startup without success. So I went back to my /etc/rc.d/rc.local method. I'm not crazy about it, but it works. Maybe there is some other config that was necessary to use the alsasound start script, but I have limited play time. > > subssn594> 2. What's the best place to get started to be able to receive web > subssn594> radio broadcasts? I haven't found anything very helpful in the RH > subssn594> distro. Maybe I'm not looking for the right thing? > > Not sure, but you can hear the WPI radio station WWPI at > http://radio.wpi.edu/ > > All you need is XMMS. There is a .pls file that gets downloaded. The > .pls file contains a URL which can be loaded into XMMS via "Play > Location". You can also set up your web browser to handle this > automatically with a command line of "/usr/bin/xmms". I did install xmms, and had some "visual" success. At first, I could even see the audio sound levels on the xmms main screen, but then I somehow messed it up. In addition, I haven't had any success getting sound. Note that I haven't played with MP3 files at all, so I may be missing some critical setup. I took a very quick look at esound, but there again, limited play time. Any suggestions to put me on the right path? > > -- > Charles R. Anderson <cra(a)wpi.edu> / http://angus.ind.wpi.edu/~cra/ > PGP Key ID: 49BB5886 > Fingerprint: EBA3 A106 7C93 FA07 8E15 3AC2 C367 A0F9 49BB 5886 > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > Thanks for your help. Bill

Jan. 20, 2002

AOL in Negotiations to Buy Red Hat

by Tom Guilderson

This is an article from the tech section of todays Washington Post http://www.washtech.com/news/media/14759-1.html

Jan. 19, 2002

Re: [Wlug] AOL in Negotiations to Buy Red Hat

by Andy Stewart

On Saturday 19 January 2002 12:42 pm, you wrote: > "But the AOL software could be configured to override Windows and launch > a version of Red Hat's Linux operating system, sources said." > > Override and launch? Does anyone know what they mean here? Are they > talking about clicking on the AOL icon and booting into linux?? > > Thanks, > Greg That sounds like a non-tech person trying to write about a technical topic and having it come out all wrong. I wonder if they were trying to hint about the possibility of making the AOL client software run on Linux. Later, Andy -- Andy Stewart Founder Worcester Linux Users' Group Worcester, MA, USA http://www.wlug.org

Jan. 19, 2002

Re: [Wlug] AOL in Negotiations to Buy Red Hat

by avedis＠ma.ultranet.com

"But the AOL software could be configured to override Windows and launch a version of Red Hat's Linux operating system, sources said." Override and launch? Does anyone know what they mean here? Are they talking about clicking on the AOL icon and booting into linux?? Thanks, Greg On 19 Jan 2002, at 13:07, Tom Guilderson wrote: > This is an article from the tech section of todays Washington Post > > http://www.washtech.com/news/media/14759-1.html > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

Jan. 19, 2002

Fwd: Millbury Schools...

by Andy Stewart

Hi gang, I just received an e-mail from Rob Bellville from Millbury Public Schools. He has a bunch of old PowerMac 6100s and was wondering if it made sense to convert them to work as thin Linux clients (similar to the Linux terminal server project (ltsp.org)) If somebody would like to take a crack at doing this for a couple of these PowerMacs as a proof of concept, give Rob a shout at rb(a)millbury.net. I've attached Rob's e-mail, which has more detail. Later, Andy ---------- Forwarded Message ---------- Subject: Millbury Schools... Date: Fri, 18 Jan 2002 13:14:25 -0500 From: <rb(a)millbury.net> To: andystewart(a)mediaone.net Andy, I have a thought about a WLUG project for the Millbury Schools. We are disposing of about 20-30 PowerMac 6100s and I was wondering if anyone in the WLUG group had any experience with thin linux terminals (LTSP.org) I've got one of them running mkLinux right now and I have a nice hefty Dell server (1GHz / 512 MB RAM) that could power quite a few of these clients. I'd hate to throw away all these Macs when they could be used somewhere within the district. They are 66 MHz / 40 MB RAM / 600 MB HD with NICs. The only problem at the moment is that timing is critical. They are being stored and need to be removed in the next month. I can let a few of them go to someone who wanted to work on them at home. I'd like to be able to have them be at the very minimum an Internet terminal and maybe run StarOffice or something similar. Let me know your thoughts. Like I said, this project could be done outside of the school and then come back to clone the remaining Macs after they were tested. I would be willing to give a few of them to someone as compensation. I'm still in a hectic school-construction mode so my participation will be limited to a minimum but I would be happy to deliver the Macs to anyone who was willing to give it a go. Also, it would be a good thing to write up for the LTSP.org website as they don't have much in the way of using Macs as thin clients. Thanks! -- Rob --== rb(a)millbury.net ==-- ------------------------------------------------------- -- Andy Stewart Founder Worcester Linux Users' Group Worcester, MA, USA http://www.wlug.org

Jan. 19, 2002

Re: [Wlug] Power Mac 6100s...

by Adam ＠ Oak

These are either 66 or 80 mhz PPC 601, Nu-Bus based Macs, hence the limitation to mkLinux and not LinuxPPC. Also I think they take 72 pin EDO. At some point Apple, in their infinite wisdom switched to 168 pin EDO, which a bitch to find. I think that was at the 7300 level though. -Adam On Fri, 18 Jan 2002, Michael Frysinger wrote: > what are the specs on it ? > -mike > > ----- Original Message ----- > From: <rb(a)millbury.net> > To: <wlug(a)mail.wlug.org> > Sent: Friday, January 18, 2002 12:56 PM > Subject: [Wlug] Power Mac 6100s... > > > > If anyone is interested in PowerMac 6100s for Linux or otherwise, please > > email me privately. I have a quantity of these units to trade off or sell > > cheap. I'm still working out the logistical details but wanted to see if > > anyone had any interest in these units. > > > > I've got one of them running mkLinux pretty well right now. > > > > - Rob > > _______________________________________________ > > Wlug mailing list > > Wlug(a)mail.wlug.org > > http://mail.wlug.org/mailman/listinfo/wlug > > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > "lingua machinationis creo, ergo sum" _____________________________________________ Adam Keck The Mathworks 508-647-7298 Natick, Ma www.mathworks.com FreeNIX/Backup/Unix Administrator _____________________________________________

Jan. 18, 2002

Re: [Wlug] Power Mac 6100s...

by Michael Frysinger

what are the specs on it ? -mike ----- Original Message ----- From: <rb(a)millbury.net> To: <wlug(a)mail.wlug.org> Sent: Friday, January 18, 2002 12:56 PM Subject: [Wlug] Power Mac 6100s... > If anyone is interested in PowerMac 6100s for Linux or otherwise, please > email me privately. I have a quantity of these units to trade off or sell > cheap. I'm still working out the logistical details but wanted to see if > anyone had any interest in these units. > > I've got one of them running mkLinux pretty well right now. > > - Rob > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

Jan. 18, 2002

Power Mac 6100s...

by rb＠millbury.net

If anyone is interested in PowerMac 6100s for Linux or otherwise, please email me privately. I have a quantity of these units to trade off or sell cheap. I'm still working out the logistical details but wanted to see if anyone had any interest in these units. I've got one of them running mkLinux pretty well right now. - Rob

Jan. 18, 2002

win4lin

by Skip Gaede

While looking through Tom's Hardware Guide for motherboard reviews, I ran across an interesting article on Win4Lin (http://www4.tomshardware.com/howto/01q4/011205/index.html) Has anyone used this product, or know any more details? This looks like a slick product... --Skip

Jan. 18, 2002

Re: [Wlug] General firewall question

by Richard Goodman

Ziegler's book was the only firewalling book that made sense to me as a newbie 1+ years ago when I was trying to get an IPChains firewall installed on a DSL connected RH7 box. Just noticed this last week that the 2nd edition is out as of Oct 2001, which, while I haven't seen it yet, it is supposed to be updated for IPTables. Dick At 8:58 PM -0500 1/17/02, Andy Stewart wrote: > >One might also opt for a minimal Linux installation with the addition of >the necessary firewall software. I know that SuSE Linux has such an >option in its canned installation. > >Robert Ziegler wrote a book entitled "Linux Firewalls" which I liked, but >it is not for the fainthearted. > >Later, > -- ------------------------------------------------- Richard Goodman dick(a)goodman1.net ---> Home: (508) 753-DICK trader(a)goodman1.net ---> Work: (508) 757-3452 voice/fax

Jan. 18, 2002